Architectural Drawings.pdf

PDF 13 MB Posted

Attached to
Z1DA--SPD Storage Temp and Humidity Controls Project 541-21-101 Federal contract opportunity
Solicitation number
36C25021B0017
Issued by
Department of Veterans Affairs Veterans Health Administration Veterans Integrated Service Network 10

About this file

Written by GovTribe AI ·

This pre-solicitation notice from the Department of Veterans Affairs Veterans Health Administration Veterans Integrated Service Network 10 seeks temperature and humidity control services for a Sterile Processing Department storage facility. The purpose of the modification is to extend the project duration from 120 calendar days to 210 calendar days from notice to proceed. The project is set aside solely for service-disabled veteran owned small businesses. Interested parties should direct any questions by email to the specified contracting officer by identifying the project number in the subject line. No solicitation is currently available; this notice provides advance information only.

View the file

Other files for this federal contract opportunity

Other files attached to Z1DA--SPD Storage Temp and Humidity Controls Project 541-21-101, newest first.
File Type Posted
Bid Opening Attendance Roster Provide Temp and Humidity Controls.pdf PDF
36C25021B0017 0005.docx DOCX document
Bid Abstract Provide Temp and Humidity Controls CLE VAMC.pdf PDF
36C25021B0017 0004.docx DOCX document
541-21-101 Bid Opening Instructions - Revised.pdf PDF
36C25021B0017 0003.docx DOCX document
013526_Safety Requirements 2020 Update ADD 1.pdf PDF
21-0416 Provide Temperature and Humidity Controls - ADDENDUM 1 - Drawings.pdf PDF
541-21-101 Bid Opening Instructions.pdf PDF
36C25021B0017 0002.docx DOCX document
Sign-in Sheet - Site Visit - Provide Temperature and Humidity Controls to SPD Storage.pdf PDF
Mechanical Drawings.pdf PDF
36C25021B0017 0001.docx DOCX document
Site Visit - 10701 East Blvd - Google Maps.pdf PDF
Technical Specifications.pdf PDF
36C25021B0017_1.docx DOCX document
Wage Determination 02.2021.pdf PDF
VHA DIRECTIVE 1192.01.pdf PDF
Show all 18

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

TITLE SHEET & DRAWING

INDEX

SITE KEY PLAN

NTS

10701 EAST BLVD. CLEVELAND, OH. 44106

DEPARTMENT OF VETERANS AFFAIRS MEDICAL CENTER - WADE PARK

Cleveland Veterans Affairs

Medical Center

PROVIDE TEMPERATURE AND HUMIDITY CONTROLS TO SPD STORAGE

DRAWING INDEX

PROJECT NO. 541-21-101

GI-1 TITLE SHEET & DRAWING INDEX

EX. CONDITIONS/LIFE SAFETY

LS-A SUB-BASEMENT LEVEL A - EXISTING CONDITIONS/

LIFE SAFETY PLAN

LS-100 BASEMENT LEVEL - EXISTING CONDITIONS/

LIFE SAFETY PLAN

LS-101 1ST FLOOR - EXISTING CONDITIONS/LIFE SAFETY PLAN

LS-102 2ND FLOOR - EXISTING CONDITIONS/LIFE SAFETY PLAN

LS-103 3RD FLOOR - EXISTING CONDITIONS/LIFE SAFETY PLAN

LS-104 4TH FLOOR - EXISTING CONDITIONS/LIFE SAFETY PLAN

LS-105 5TH FLOOR - EXISTING CONDITIONS/LIFE SAFETY PLAN

LS-106 6TH FLOOR - EXISTING CONDITIONS/LIFE SAFETY PLAN

AS-C-1 EXISTING REFERENCE CEILING PLANS & GENERAL NOTES

AS-C-2 EXISTING REFERENCE CEILING PLANS & GENERAL NOTES

AS-C-3 EXISTING REFERENCE CEILING PLANS & GENERAL NOTES

AS-C-4 EXISTING REFERENCE CEILING PLANS & GENERAL NOTES

MECHANICAL/HVAC

M-001 MECHANICAL LEGEND, NOTES, AND INDEX OF DRAWINGS

MD-100B PARTIAL BASEMENT FLOOR PLAN - DEMOLITION

MH-100 PARTIAL SUB-BASEMENT & BASEMENT FLOOR PLAN -

NEW WORK

FINAL CD's SUBMISSION

11.17.20

CLEVELAND VAMC

NORTH

I. PROJECT LOCATION: CLEVELAND VETERANS AFFAIRS MEDICAL CENTER

10701 EAST BLVD.

CLEVELAND, OHIO

II. DESCRIPTION & USER GROUP CLASSIFICATION OF BLDG

A. NATURE OF PROJECT: ASSESSMENT/ADDITION OF TEMPERATURE & HUMIDITY

CONTROLS TO EXISTING STERILE PROCESSING DISTRIBUTION

(SPD) CLEAN/UTILITY ROOMS AT THE MAIN MEDICAL CAMPUS

B. DESIGN CODES: 2018 NFPA LIFE SAFETY CODE 101, IBC 2018

C. USE GROUP: MIXED USE GROUPS IN HOSPITAL (I-2/S/B) - NO CHANGE

PROPOSED

D. CONSTRUCTION TYPE: TYPE I -332, IB - NON-COMBUSTIBLE, PROTECTED

FIRE RATED CONSTRUCTION (LSC A.8.2.1.2)

EXTERIOR BEARING WALLS 3 HRS

INTERIOR BEARING WALLS 3 HRS

STRUCTURAL COLUMNS 3 HRS (SUPPORTING > 1 FLOOR)

2 HRS (SUPPORTING 1 FLOOR ONLY)

2 HRS (SUPPORTING ROOF ONLY)

BEAMS, GIRDERS, TRUSSES 3 HRS (SUPPORTING > 1 FLOOR, COLS., OR BEARING

WALLS

2 HRS (ALL OTHERS)

FLOOR-CEILING ASSEMBLIES 2 HRS

ROOF-CEILING ASSEMBLIES 1

HRS

INTERIOR NON-BEARING WALLS 0 HRS

EXTERIOR NON-BEARING WALLS 0 HRS

WALL ASSEMBLIES

EXIT ACCESS CORRIDOR WALLS 0 HR SMOKE PARTITIONS

CODE INFORMATION

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

A

F i l e

P a t h

P

M

FULLY SPRINKLERED

Louis Stokes Cleveland

VA Medical Center

U.S. Department of Veterans Affairs

B

C

D

E

F

A

B

C

D

E

F

21 4 5 6 7 8 9 10

PhaseARCHITECT OF RECORD STAMPCONSULTANTS

321 4 5 6 7 8 9 10

PROVIDE TEMPERATURE AND

HUMIDITY CONTROLS TO SPD

STORAGE

10701 EAST BLVD. CLEVELAND, OHIO

541-21-101

NICK CARROZZA

CJK DAKRevisions: Date:

E T

G

DE

I

RET

S

HCRA

I

KACZMAR

STANLEY

NO. 4988

T

E R

S

ATE

I

T C

J.

O

O

FO

H

COST ESTIMATING:

MCGUINESS UNLIMITED, INC.

15724 STILLWOOD AVE.

CLEVELAND, OH 44111

P. 440.667.5120

ELECTRICAL ENGINEERING:

FFE, INC.

110 BOGGS LANE, SUITE 170

SPRINGDALE, OH 45246

P. 513.522.2107

HAZ. MATERIALS ASSESSMENT:

STEPHEN J. SEBESTA & ASSOC., INC.

30628 DETROIT RD. #258

WESTLAKE, OH 44145

P. 216.781.0060

MECHANICAL ENGINEERING:

HEAPY

1422 EUCLID AVE. SUITE 1162

CLEVELAND, OH 44115

P. 216.862.5846

1468 WEST 9TH STREET #400

CLEVELAND, OH 44113

P. 216.687.1555 F. 216.687.1558 GI-1

FINAL CDs SUBMISSION

11.17.20

65% CD'S SUBMISSION 8.25.20

E. PROJECT AREA: STERILE PROCESSING DISTRIBUTION ROOMS

THROUGHOUT THE ENTIRE HOSPITAL, ALL

FLOORS

F. PROJECT AREA OCCUPANT LOAD: NOT APPLICABLE

G. FIRE PROTECTION: EXISTING BUILDING FULLY SPRINKLED AND

WILL REMAIN AS A PART OF THIS PROJECT.

FIRE PROTECTION SYSTEM DESIGN NOT IN

SCOPE OF WORK

MD-101 PARTIAL 1ST FLOOR PLAN - DEMOLITION

MH-101 PARTIAL 1ST FLOOR PLAN - NEW WORK

MD-102.1 PARTIAL 2ND FLOOR PLAN - DEMOLITION

MH-102.1 PARTIAL 2ND FLOOR PLAN - NEW WORK

MD-102.2 PARTIAL 2ND FLOOR PLAN - DEMOLITION

MH-102.2 PARTIAL 2ND FLOOR PLAN - NEW WORK

MD-103 PARTIAL 3RD FLOOR PLAN - DEMOLITION

MH-103 PARTIAL 3RD FLOOR PLAN - NEW WORK

MD-104 PARTIAL 4TH FLOOR PLAN - DEMOLITION

MH-104 PARTIAL 4TH FLOOR PLAN - NEW WORK

MD-105 PARTIAL 5TH FLOOR PLAN - DEMOLITION

MH-105 PARTIAL 5TH FLOOR PLAN - NEW WORK

MD-106 PARTIAL 6TH FLOOR PLAN - DEMOLITION

MH-106 PARTIAL 6TH FLOOR PLAN - NEW WORK

M-501 DETAILS

M-601 SCHEDULES

M-901 CONTROLS

100% CD'S SUBMISSION 10.19.20

FINAL CD'S SUBMISSION 11.17.20

CONSTRUCTION TIMEFRAME:

THE SCOPE OF WORK DESCRIBED IN THIS DRAWING PACKAGE REPRESENTS A MULTI-PHASED PROJECT THAT MUST BE UNDERTAKEN

SIMULTANEOUSLY WITH THE FULL OCCUPANCY AND FUNCTION OF THE EXISTING HOSPITAL. IT IS THE INTENT OF THE PROJECT THAT

WORK BE PERFORMED ON A ROOM-BY-ROOM BASIS, WITH CONSTRUCTION ACTIVITIES OCCURRING ONLY ON ONE (1) SPD ROOM/AREA AT A

TIME.

THE PROPOSED CONSTRUCTION TIMEFRAME IS AS FOLLOWS:

PRE-CONSTRUCTION: 60 DAYS

CONSTRUCTION: 120 DAYS (NOTE: CONTRACTOR SHALL ALLOW 2 DAYS PER ROOM/AREA FOR THIRD-PARTY MASTER

SYSTEMS INTEGRATOR WORK)

CLOSE-OUT: 30 DAYS

THE TIMEFRAMES IDENTIFIED ABOVE ARE IN REFERENCE TO NORMAL CONSTRUCTION ACTIVITIES AND, UNLESS APPROVED BY VA COR OR

DESCRIBED ABOVE, SHALL NOT APPLY TO WORK INCLUDING BUT NOT LIMITED TO:

· UTILITY SHUTDOWNS

· EXISTING MEP SYSTEM SHUTDOWNS

· WORK IN PUBLIC CORRIDORS/WAITING AREAS

· WORK OUTSIDE OF TEMPORARY CONSTRUCTION PARTITIONED AREAS

· CONSTRUCTION OF TEMPORARY BARRIERS, WHERE REQUIRED

WORK IDENTIFIED ABOVE SHALL OCCUR EITHER IN THE EVENING SHIFT, OR IF REQUIRED BY THE VA, ON WEEKENDS. ALL CONSTRUCTION

ACTIVITIES AND SCHEDULES MUST BE REVIEWED AND APPROVED BY VA COR. REFER TO SPEC DIVISION 01 FOR GENERAL PROJECT

REQUIREMENTS

TOTAL CONSTRUCTION TIMEFRAME: 210 DAYS

AutoCAD SHX Text

EAST BLVD.

AutoCAD SHX Text

E. 105 ST.

AutoCAD SHX Text

EAST BLVD.

AutoCAD SHX Text

MAGNOLIA DR.

AutoCAD SHX Text

HAZEL DR.

AutoCAD SHX Text

E. 108 ST.

AutoCAD SHX Text

MT. SINAI DR.

AutoCAD SHX Text

MARTIN LUTHER KING DR.

SUB-BASEMENT LEVEL A - EXISTING

CONDITIONS/LIFE SAFETY PLAN

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

A

F i l e

P a t h

P

M

FULLY SPRINKLERED

Louis Stokes Cleveland

VA Medical Center

U.S. Department of Veterans Affairs

B

C

D

E

F

A

B

C

D

E

F

21 4 5 6 7 8 9 10

PhaseARCHITECT OF RECORD STAMPCONSULTANTS

321 4 5 6 7 8 9 10

PROVIDE TEMPERATURE AND

HUMIDITY CONTROLS TO SPD

STORAGE

10701 EAST BLVD. CLEVELAND, OHIO

541-21-101

NICK CARROZZA

CJK DAKRevisions: Date:

E T

G

DE

I

RET

S

HCRA

I

KACZMAR

STANLEY

NO. 4988

T

E R

S

ATE

I

T C

J.

O

O

FO

H

COST ESTIMATING:

MCGUINESS UNLIMITED, INC.

15724 STILLWOOD AVE.

CLEVELAND, OH 44111

P. 440.667.5120

ELECTRICAL ENGINEERING:

FFE, INC.

110 BOGGS LANE, SUITE 170

SPRINGDALE, OH 45246

P. 513.522.2107

HAZ. MATERIALS ASSESSMENT:

STEPHEN J. SEBESTA & ASSOC., INC.

30628 DETROIT RD. #258

WESTLAKE, OH 44145

P. 216.781.0060

MECHANICAL ENGINEERING:

HEAPY

1422 EUCLID AVE. SUITE 1162

CLEVELAND, OH 44115

P. 216.862.5846

1468 WEST 9TH STREET #400

CLEVELAND, OH 44113

P. 216.687.1555 F. 216.687.1558 LS-A

FINAL CDs SUBMISSION

11.17.20

65% CD'S SUBMISSION 8.25.20

LIFE SAFETY LEGEND

PROJECT SCOPE BOUNDARY

EXISTING 2 HOUR SMOKE BARRIER

EXISTING 2 HOUR FIRE BARRIER

EXISTING 1 HOUR FIRE BARRIER

EXISTING 1 HOUR SMOKE BARRIER

LIFE SAFETY GENERAL NOTES

1. SEE COVER SHEET FOR APPLICABLE CODE INFORMATION. BUILDING IS

CLASSIFIED AS AN "EXISTING HEALTHCARE OCCUPANCY" PER NFPA 101 2018

4. PROJECT SCOPE LINE IS INDICATED FOR GENERAL INTENT ONLY.

CONTRACTOR WILL COMPLETE ALL WORK REGARDLESS IF IT IS LOCATED

OUTSIDE OF PROJECT SCOPE AREA AS INDICATED ON ANY DRAWING

5. CONTRACTOR TO COVER OR ALTER EXIT SIGNS WHICH, DUE TO

CONSTRUCTION, TEMPORARILY DO NOT DEPICT EXIT PATHS (TYP. OF ALL

EXIT SIGNS IN OR BEYOND PROJECT AREA)

6. TRAVEL DISTANCES OVER 200' WILL REQUIRE INTERIM LIFE SAFETY

MEASURES. COORDINATE WITH VA

7. EXISTING FLOOR SLABS ARE 2 HR FIRE RATED. FOR ALL NEW CORE

DRILLS/UTILITY PENETRATIONS, GC SHALL UTILIZE GROUND PENETRATING

RADAR TO X-RAY EXISTING FLOOR SLAB AT PROPOSED, NEW PENETRATION

LOCATION TO ENSURE THAT FLOOR SLAB REBAR STRUCTURE WILL NOT BE

COMPROMISED, AND SHALL NOTIFY COR AND A/E TEAM OF ANY ISSUES

DISCOVERED IN FIELD. GC SHALL PROVIDE NEW 2 HR RATED THRU-SLAB

FIRESTOP ASSEMBLIES AT ALL PENETRATIONS. FOR EXISTING THRU-SLAB

UTILITIES THAT ARE REMOVED AS A PART OF DEMOLITION SCOPE, GC SHALL

PATCH CONC. SLAB FULLY WITH NEW CONCRETE TO MATCH EXISTING.

8. PROVIDE FIRESTOPPING AT ALL PENETRATIONS THROUGH NEW AND

EXISTING FIRE/SMOKE RATED BARRIER WALLS AND FLOOR SLABS TO COMPLY

WITH THE REQUIRED BARRIER RATINGS. PROVIDE FIRESTOPPING AROUND

TEN (10) PENETRATIONS LESS THAN 6 SQUARE INCHES AND FOUR (4)

PENETRATIONS BETWEEN 16 AND 36 SQUARE INCHES TO COMPLY WITH

REQUIRED RATING NOT ASSOCIATED WITH NEW WORK. LARGER OPENINGS

SHALL BE BROUGHT TO THE ATTENTION OF THE COR. GC SHALL SUBMIT UL

LISTED METHODS FOR PATCHING ALL FIRE BARRIERS THAT MEET THE

MINIMUM FIRE RATING REQUIREMENTS OF THE PENETRATED BARRIER AND

ARE IN COMPLIANCE WITH THE OPENING SIZE AS DICTATED BY THE

ASSEMBLY.

9. TEMPORARY FIRE ALARMS IN CONSTRUCTION AREAS: GC SHALL PROVIDE

TEMPORARY FIRE ALARMS IN ALL CONSTRUCTION AREAS THROUGHOUT THE

CONSTRUCTION DURATION UNTIL SUCH TIME THAT NEW FIRE ALARM SYSTEM

DEVICES ARE INSTALLED, TESTED, AND IN FULL OPERATION. HEAT

DETECTION DEVICES SHALL BE UTILIZED AND SHALL BE CONNECTED TO THE

BUILDING FIRE ALARM SYSTEM AND COORDINATED THROUGH THE VA

ELECTRICAL SHOP. GC SHALL COORDINATE WITH VA SAFETY DEPARTMENT

FOR ALL TEMPORARY FIRE ALARM INSTALLATIONS TO ENSURE COMPLIANCE

WITH SAFETY STANDARDS.

2. LIFE SAFETY PLANS ARE INTENDED TO BE PARTIAL ONLY, AND INDICATE

ONLY THE RATINGS OF THE PARTITIONS OF THE PERIMETER WALLS AND

ROOMS ADJACENT TO THE SPD STORAGE ROOMS IN THE SCOPE OF WORK

3. AS WORK IS LIMITED TO THE SPD STORAGE ROOMS ONLY, EXISTING EGRESS

PATHS WILL NOT BE BLOCKED AS A PART OF CONSTRUCTION. THE

CONTRACTOR IS RESPONSIBLE FOR SEALING AND PROTECTING THE ENTRY

DOORS OF THE ROOMS IN THE SCOPE OF WORK TO MITIGATE ALL

DUST/DEBRIS FROM THE CONSTRUCTION AREA

1" = 30'-0"

EX. CONDITIONS/LIFE SAFETY PLAN

SUB-BASEMENT LEVEL A

NORTH

AF215

HAZARDOUS ROOM

EXISTING 0 HOUR SMOKE PARTITION

ROOM PERIMETER

WALLS: WEST: 0 HR

SMOKE PARTITIONS

SOUTH 1 HR FIRE

BARRIERS

EAST/NORTH:

UNRATED PARTITIONS

100% CD'S SUBMISSION 10.19.20

HAZARDOUS MATERIALS

ABATEMENT:

1. THE USEPA NESHAP (NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR

POLLUTANTS) (40 CFR PART 61) DEFINES “ASBESTOS CONTAINING

MATERIALS (ACM)” AS MATERIALS THAT CONTAIN MORE THAN 1% ASBESTOS SO ANY

MATERIAL CONTAINING LESS THAN 1% ASBESTOS IS NOT, BY REGULATOR

DEFINITION, AN ASBESTOS CONTAINING MATERIAL. NESHAP FURTHER DEFINES

REGULATED ACM (RACM) AS FRIABLE ACM, CATEGORY 1 NONFRIABLE THAT BECOMES

FRIABLE AND CATEGORY ACM THAT HAS A HIGH PROBABILITY OF BECOMING FRIABLE.

2. OSHA DOES NOT REGULATE WHAT ASBESTOS MUST BE REMOVED DURING

DEMOLITION OR RENOVATION BUT STRICTLY REGULATES THE PROCEDURES THAT

MUST BE FOLLOWED FOR WORKER PROTECTION FROM ASBESTOS EXPOSURE.

3. SOME OF THE ORIGINAL PLASTER ON METAL LATH CONTAINING LESS THAN 1%

ASBESTOS WAS OBSERVED IN ROOMS 2059, 2C330A, 2C328, 2C437, 2E334, 3B133,

4A106, 4A128, 5A107, 6A138, AND ASSUMED BEHIND INACCESSIBLE WALLS AND

CEILINGS. THE FIREPROOFING IN ROOM 1B589A WAS REPORTED TO

CONTAIN <1% ASBESTOS. THESE MATERIALS ARE NOT CONSIDERED

ASBESTOS-CONTAINING MATERIALS WHICH ARE DEFINED AS MATERIAL “CONTAINING

MORE THAN 1% ASBESTOS” BY THE USEPA, NESHAPS. THE OSHA REQUIREMENTS

UNDER 29 CFR 1926.1101 FOR DISTURBING MATERIALS WITH 1% OR LESS ASBESTOS

SHOULD BE FOLLOWED. THESE REQUIREMENTS INCLUDE THE WET HANDLING,

PROMPT CLEAN-UP AND DISPOSAL OF WASTES IN LEAK TIGHT CONTAINERS, AND

EXPOSURE ASSESSMENT BY A COMPETENT PERSON. THE WALL PLASTER AND

FIREPROOFING WOULD BE CONSIDERED A NON-ACM OR NON-RACM MATERIAL THAT

DOES NOT REQUIRE REMOVAL OR ABATEMENT BUT IS SUBJECT TO CERTAIN OSHA

REQUIREMENTS THAT ARE NOT CONSIDERED CLASS I, CLASS II OR CLASS III

ABATEMENT WORK. CONTRACTOR TO PRICE AN AREA OF 1,000 SF OF PLASTER ON

METAL LATH TO BE REMOVED OR PROPERLY HANDLED ACCORDING TO THE OSHA

REQUIREMENTS UNDER 29CFR 1926.1101. THIS AMOUNT IS INTENDED TO COVER THE

ENTIRE PROJECT, NOT JUST THE FLOOR ON THIS DRAWING SHEET.

4. ALTHOUGH NO ASBESTOS-CONTAINING PIPE INSULATION JOINTS WERE OBSERVED

ON THE INSPECTION, IT IS POSSIBLE THAT ASBESTOS-CONTAINING PIPE INSULATION

JOINTS MAY BE PRESENT ABOVE PERMANENT CEILINGS. CONTRACTOR TO INCLUDE

THE COST FOR THE REMOVAL OF UP TO TWENTY (20) EACH ASBESTOS-CONTAINING

PIPE INSULATION JOINTS ABOVE INACCESSIBLE CEILINGS. THIS AMOUNT IS

INTENDED TO COVER THE ENTIRE PROJECT, NOT JUST THE FLOOR ON THIS DRAWING

SHEET.

5. ALTHOUGH NO ASBESTOS-CONTAINING RED DUCT MASTIC WAS NOTED ON THE

INSPECTION, IT IS POSSIBLE THAT SOME OF THE RED DUCT MASTIC MAY BE PRESENT

BELOW FIBERGLASS INSULATION ON OLD DUCTWORK IN THE PROJECT AREA. IF THE

CATEGORY 2 NON-FRIABLE ASBESTOS-CONTAINING DUCT MASTIC IS DISCOVERED

AND WILL BE DISTURBED DURING THE RENOVATION, CARE SHOULD BE EXERCISED

TO PREVENT SUBJECTING THE DUCT MASTIC TO CUTTING, GRINDING, SANDING, OR

ABRADING WHICH WOULD RENDER IT FRIABLE. DISPOSE OF ANY REMOVED

DUCTWORK WITH ASBESTOS-CONTAINING CATEGORY 2 NON-FRIABLE MASTIC AT AN

EPA APPROVED LANDFILL. CONTRACTOR TO INCLUDE THE COST FOR THE DISPOSAL

OF UP TO 100 LN FT OF DUCTWORK WITH ASBESTOS-CONTAINING MASTIC. THIS

AMOUNT IS INTENDED TO COVER THE ENTIRE PROJECT, NOT JUST THE FLOOR ON

THIS DRAWING SHEET.

NOTE: REFER TO REFERENCE CEILING PLAN DRAWINGS AS-C-1 THRU AS-C-4 FOR

ENLARGED LIFE SAFETY CONDITIONS AND ALL FIRE RATED ASSEMBLIES

FINAL CD'S SUBMISSION 11.17.20

DRAWINGS

EX. CLG. PLAN: AS-C-1

HVAC: 1/MH-100

AutoCAD SHX Text

UP

AutoCAD SHX Text

UP

AutoCAD SHX Text

UP

AutoCAD SHX Text

FEC

AutoCAD SHX Text

FEC

AutoCAD SHX Text

FEC

AutoCAD SHX Text

FEC

ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg AutoCAD SHX Text

UP

UP

BFC06F

AB

C

D E

ACB

D

EF

G H

AC-26

AC-28

THERAPY

TABLE

PRINTER

BIO-DEX

COMP. CART

CHAIR

BIO-DEXL L

EXERCISE

EQUIP

CALDWELL

CART

ARGOMETER

MAT TABLE

BASKET

HAMPER

MAGSTIM

CART

DUMBBELL

RACKS

STEP

STOOLCHAIR

TABLE

ROLLING

MIRROR

THERAPY

TABLE

THERAPY

TABLE

SINK/ COUNTERTOP

(from storage)

THERAPY

TABLE

THERAPY

TABLE

TRASH

5 DRAWER

LAT. FILE

ROLLING

MIRROR

(from storage)

BIO-DEX EQUIP

HAMPER

FAX

GFI

B

F

I

JK

A B C D

BD607A

BD605A

AIR

VAC

OXY

AIR

OXY

VAC

BED

TREADMILL

COMP.

TABLE

AIR

VAC

OXY

A B

C D

E F G

H I J

K L M

N

O

U

Q

S

T

V

W

X Y

Z

AABBCC

DD

P

R

BD421

MENS

LOCKER

RM

MENS

RESTROOM

MENS

LOCKER

RM

WOMENS

LOCKER

RM

WOMENS

SHOWERS

CORRIDOR

CORRIDOR

BASEMENT LEVEL - EXISTING

CONDITIONS/LIFE SAFETY PLAN

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

A

F i t h

P

M

FULLY SPRINKLERED

Louis Stokes Cleveland

VA Medical Center

U.S. Department of Veterans Affairs

B

C

D

E

F

A

B

C

D

E

F

21 4 5 6 7 8 9 10

PhaseARCHITECT OF RECORD STAMPCONSULTANTS

321 4 5 6 7 8 9 10

PROVIDE TEMPERATURE AND

HUMIDITY CONTROLS TO SPD

STORAGE

10701 EAST BLVD. CLEVELAND, OHIO

541-21-101

NICK CARROZZA

CJK DAKRevisions: Date:

E T

G

DE

I

RET

S

HCRA

I

KACZMAR

STANLEY

NO. 4988

T

E R

S

ATE

I

T C

J.

O

O

FO

H

COST ESTIMATING:

MCGUINESS UNLIMITED, INC.

15724 STILLWOOD AVE.

CLEVELAND, OH 44111

P. 440.667.5120

ELECTRICAL ENGINEERING:

FFE, INC.

110 BOGGS LANE, SUITE 170

SPRINGDALE, OH 45246

P. 513.522.2107

HAZ. MATERIALS ASSESSMENT:

STEPHEN J. SEBESTA & ASSOC., INC.

30628 DETROIT RD. #258

WESTLAKE, OH 44145

P. 216.781.0060

MECHANICAL ENGINEERING:

HEAPY

1422 EUCLID AVE. SUITE 1162

CLEVELAND, OH 44115

P. 216.862.5846

1468 WEST 9TH STREET #400

CLEVELAND, OH 44113

P. 216.687.1555 F. 216.687.1558 LS-100

FINAL CDs SUBMISSION

11.17.20

65% CD'S SUBMISSION 8.25.20

1" = 30'-0"

EX. CONDITIONS/LIFE SAFETY PLAN

BASEMENT LEVEL

NORTH

BB226C

BACK HALL -

EMPLOYEE

HEALTH

BB561

BC532

BF208

BF213

BF153

ROOM PERIMETER

WALLS: 1 HR FIRE

BARRIERS

ROOM PERIMETER

WALLS: 1 HR FIRE

BARRIERS

ROOM PERIMETER

WALLS: NORTH/WEST:

0 HR SMOKE

PARTITIONS

EAST/SOUTH 1 HR

FIRE BARRIERS

ROOM PERIMETER

WALLS: NORTH/EAST:

1 HR SMOKE

BARRIERS

WEST/SOUTH 1 HR

FIRE BARRIERS

ROOM PERIMETER

WALLS: 0 HR

SMOKE

PARTITIONS

ROOM PERIMETER

WALLS: UNRATED

PARTITIONS

ROOM PERIMETER

WALLS: UNRATED

PARTITIONS.

EXISTING SPD

STORAGE UNITS

ARE LOCATED AT

THE WEST END OF

THE HALLWAY -

UNENCLOSED

100% CD'S SUBMISSION 10.19.20

LIFE SAFETY LEGEND

PROJECT SCOPE BOUNDARY

EXISTING 2 HOUR SMOKE BARRIER

EXISTING 2 HOUR FIRE BARRIER

EXISTING 1 HOUR FIRE BARRIER

EXISTING 1 HOUR SMOKE BARRIER

LIFE SAFETY GENERAL NOTES

1. SEE COVER SHEET FOR APPLICABLE CODE INFORMATION. BUILDING IS

CLASSIFIED AS AN "EXISTING HEALTHCARE OCCUPANCY" PER NFPA 101 2018

4. PROJECT SCOPE LINE IS INDICATED FOR GENERAL INTENT ONLY.

CONTRACTOR WILL COMPLETE ALL WORK REGARDLESS IF IT IS LOCATED

OUTSIDE OF PROJECT SCOPE AREA AS INDICATED ON ANY DRAWING

5. CONTRACTOR TO COVER OR ALTER EXIT SIGNS WHICH, DUE TO

CONSTRUCTION, TEMPORARILY DO NOT DEPICT EXIT PATHS (TYP. OF ALL

EXIT SIGNS IN OR BEYOND PROJECT AREA)

6. TRAVEL DISTANCES OVER 200' WILL REQUIRE INTERIM LIFE SAFETY

MEASURES. COORDINATE WITH VA

7. EXISTING FLOOR SLABS ARE 2 HR FIRE RATED. FOR ALL NEW CORE

DRILLS/UTILITY PENETRATIONS, GC SHALL UTILIZE GROUND PENETRATING

RADAR TO X-RAY EXISTING FLOOR SLAB AT PROPOSED, NEW PENETRATION

LOCATION TO ENSURE THAT FLOOR SLAB REBAR STRUCTURE WILL NOT BE

COMPROMISED, AND SHALL NOTIFY COR AND A/E TEAM OF ANY ISSUES

DISCOVERED IN FIELD. GC SHALL PROVIDE NEW 2 HR RATED THRU-SLAB

FIRESTOP ASSEMBLIES AT ALL PENETRATIONS. FOR EXISTING THRU-SLAB

UTILITIES THAT ARE REMOVED AS A PART OF DEMOLITION SCOPE, GC SHALL

PATCH CONC. SLAB FULLY WITH NEW CONCRETE TO MATCH EXISTING.

8. PROVIDE FIRESTOPPING AT ALL PENETRATIONS THROUGH NEW AND

EXISTING FIRE/SMOKE RATED BARRIER WALLS AND FLOOR SLABS TO COMPLY

WITH THE REQUIRED BARRIER RATINGS. PROVIDE FIRESTOPPING AROUND

TEN (10) PENETRATIONS LESS THAN 6 SQUARE INCHES AND FOUR (4)

PENETRATIONS BETWEEN 16 AND 36 SQUARE INCHES TO COMPLY WITH

REQUIRED RATING NOT ASSOCIATED WITH NEW WORK. LARGER OPENINGS

SHALL BE BROUGHT TO THE ATTENTION OF THE COR. GC SHALL SUBMIT UL

LISTED METHODS FOR PATCHING ALL FIRE BARRIERS THAT MEET THE

MINIMUM FIRE RATING REQUIREMENTS OF THE PENETRATED BARRIER AND

ARE IN COMPLIANCE WITH THE OPENING SIZE AS DICTATED BY THE

ASSEMBLY.

9. TEMPORARY FIRE ALARMS IN CONSTRUCTION AREAS: GC SHALL PROVIDE

TEMPORARY FIRE ALARMS IN ALL CONSTRUCTION AREAS THROUGHOUT THE

CONSTRUCTION DURATION UNTIL SUCH TIME THAT NEW FIRE ALARM SYSTEM

DEVICES ARE INSTALLED, TESTED, AND IN FULL OPERATION. HEAT

DETECTION DEVICES SHALL BE UTILIZED AND SHALL BE CONNECTED TO THE

BUILDING FIRE ALARM SYSTEM AND COORDINATED THROUGH THE VA

ELECTRICAL SHOP. GC SHALL COORDINATE WITH VA SAFETY DEPARTMENT

FOR ALL TEMPORARY FIRE ALARM INSTALLATIONS TO ENSURE COMPLIANCE

WITH SAFETY STANDARDS.

2. LIFE SAFETY PLANS ARE INTENDED TO BE PARTIAL ONLY, AND INDICATE

ONLY THE RATINGS OF THE PARTITIONS OF THE PERIMETER WALLS AND

ROOMS ADJACENT TO THE SPD STORAGE ROOMS IN THE SCOPE OF WORK

3. AS WORK IS LIMITED TO THE SPD STORAGE ROOMS ONLY, EXISTING EGRESS

PATHS WILL NOT BE BLOCKED AS A PART OF CONSTRUCTION. THE

CONTRACTOR IS RESPONSIBLE FOR SEALING AND PROTECTING THE ENTRY

DOORS OF THE ROOMS IN THE SCOPE OF WORK TO MITIGATE ALL

DUST/DEBRIS FROM THE CONSTRUCTION AREA

HAZARDOUS ROOM

EXISTING 0 HOUR SMOKE PARTITION

HAZARDOUS MATERIALS

ABATEMENT:

NOTE: REFER TO REFERENCE CEILING PLAN DRAWINGS AS-C-1 THRU AS-C-4 FOR

ENLARGED LIFE SAFETY CONDITIONS AND ALL FIRE RATED ASSEMBLIES

1. THE USEPA NESHAP (NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR

POLLUTANTS) (40 CFR PART 61) DEFINES “ASBESTOS CONTAINING

MATERIALS (ACM)” AS MATERIALS THAT CONTAIN MORE THAN 1% ASBESTOS SO ANY

MATERIAL CONTAINING LESS THAN 1% ASBESTOS IS NOT, BY REGULATOR

DEFINITION, AN ASBESTOS CONTAINING MATERIAL. NESHAP FURTHER DEFINES

REGULATED ACM (RACM) AS FRIABLE ACM, CATEGORY 1 NONFRIABLE THAT BECOMES

FRIABLE AND CATEGORY ACM THAT HAS A HIGH PROBABILITY OF BECOMING FRIABLE.

2. OSHA DOES NOT REGULATE WHAT ASBESTOS MUST BE REMOVED DURING

DEMOLITION OR RENOVATION BUT STRICTLY REGULATES THE PROCEDURES THAT

MUST BE FOLLOWED FOR WORKER PROTECTION FROM ASBESTOS EXPOSURE.

3. SOME OF THE ORIGINAL PLASTER ON METAL LATH CONTAINING LESS THAN 1%

ASBESTOS WAS OBSERVED IN ROOMS 2059, 2C330A, 2C328, 2C437, 2E334, 3B133,

4A106, 4A128, 5A107, 6A138, AND ASSUMED BEHIND INACCESSIBLE WALLS AND

CEILINGS. THE FIREPROOFING IN ROOM 1B589A WAS REPORTED TO

CONTAIN <1% ASBESTOS. THESE MATERIALS ARE NOT CONSIDERED

ASBESTOS-CONTAINING MATERIALS WHICH ARE DEFINED AS MATERIAL “CONTAINING

MORE THAN 1% ASBESTOS” BY THE USEPA, NESHAPS. THE OSHA REQUIREMENTS

UNDER 29 CFR 1926.1101 FOR DISTURBING MATERIALS WITH 1% OR LESS ASBESTOS

SHOULD BE FOLLOWED. THESE REQUIREMENTS INCLUDE THE WET HANDLING,

PROMPT CLEAN-UP AND DISPOSAL OF WASTES IN LEAK TIGHT CONTAINERS, AND

EXPOSURE ASSESSMENT BY A COMPETENT PERSON. THE WALL PLASTER AND

FIREPROOFING WOULD BE CONSIDERED A NON-ACM OR NON-RACM MATERIAL THAT

DOES NOT REQUIRE REMOVAL OR ABATEMENT BUT IS SUBJECT TO CERTAIN OSHA

REQUIREMENTS THAT ARE NOT CONSIDERED CLASS I, CLASS II OR CLASS III

ABATEMENT WORK. CONTRACTOR TO PRICE AN AREA OF 1,000 SF OF PLASTER ON

METAL LATH TO BE REMOVED OR PROPERLY HANDLED ACCORDING TO THE OSHA

REQUIREMENTS UNDER 29CFR 1926.1101. THIS AMOUNT IS INTENDED TO COVER THE

ENTIRE PROJECT, NOT JUST THE FLOOR ON THIS DRAWING SHEET.

4. ALTHOUGH NO ASBESTOS-CONTAINING PIPE INSULATION JOINTS WERE OBSERVED

ON THE INSPECTION, IT IS POSSIBLE THAT ASBESTOS-CONTAINING PIPE INSULATION

JOINTS MAY BE PRESENT ABOVE PERMANENT CEILINGS. CONTRACTOR TO INCLUDE

THE COST FOR THE REMOVAL OF UP TO TWENTY (20) EACH ASBESTOS-CONTAINING

PIPE INSULATION JOINTS ABOVE INACCESSIBLE CEILINGS. THIS AMOUNT IS

INTENDED TO COVER THE ENTIRE PROJECT, NOT JUST THE FLOOR ON THIS DRAWING

SHEET.

5. ALTHOUGH NO ASBESTOS-CONTAINING RED DUCT MASTIC WAS NOTED ON THE

INSPECTION, IT IS POSSIBLE THAT SOME OF THE RED DUCT MASTIC MAY BE PRESENT

BELOW FIBERGLASS INSULATION ON OLD DUCTWORK IN THE PROJECT AREA. IF THE

CATEGORY 2 NON-FRIABLE ASBESTOS-CONTAINING DUCT MASTIC IS DISCOVERED

AND WILL BE DISTURBED DURING THE RENOVATION, CARE SHOULD BE EXERCISED

TO PREVENT SUBJECTING THE DUCT MASTIC TO CUTTING, GRINDING, SANDING, OR

ABRADING WHICH WOULD RENDER IT FRIABLE. DISPOSE OF ANY REMOVED

DUCTWORK WITH ASBESTOS-CONTAINING CATEGORY 2 NON-FRIABLE MASTIC AT AN

EPA APPROVED LANDFILL. CONTRACTOR TO INCLUDE THE COST FOR THE DISPOSAL

OF UP TO 100 LN FT OF DUCTWORK WITH ASBESTOS-CONTAINING MASTIC. THIS

AMOUNT IS INTENDED TO COVER THE ENTIRE PROJECT, NOT JUST THE FLOOR ON

THIS DRAWING SHEET.

FINAL CD'S SUBMISSION 11.17.20

DRAWINGS

EX. CLG. PLAN: AS-C-1

HVAC: 4/MH-100

DRAWINGS

EX. CLG. PLAN: AS-C-1

HVAC: 5/MH-100

DRAWINGS

EX. CLG. PLAN: AS-C-1

HVAC: 4/MD-100B

6/MH-100

DRAWINGS

EX. CLG. PLAN: AS-C-1

HVAC: 1/MD-100B

3/MH-100

DRAWINGS

EX. CLG. PLAN: AS-C-1

HVAC: 3/MD-100B

8/MH-100

DRAWINGS

EX. CLG. PLAN: AS-C-1

HVAC: 2/MD-100B

2/MH-100

DRAWINGS

EX. CLG. PLAN: AS-C-1

HVAC: 7/MH-100

AutoCAD SHX Text

UP

AutoCAD SHX Text

DN

AutoCAD SHX Text

DN

AutoCAD SHX Text

UP

AutoCAD SHX Text

UP

AutoCAD SHX Text

DN

AutoCAD SHX Text

FEC

AutoCAD SHX Text

FEC

AutoCAD SHX Text

FEC

AutoCAD SHX Text

FEC

AutoCAD SHX Text

FEC

AutoCAD SHX Text

FEC

ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg AutoCAD SHX Text

MH

AutoCAD SHX Text Ng

AutoCAD SHX Text V

AutoCAD SHX Text A

AutoCAD SHX Text O

AutoCAD SHX Text V

AutoCAD SHX Text A

AutoCAD SHX Text O

AutoCAD SHX Text V

AutoCAD SHX Text A

AutoCAD SHX Text O

AutoCAD SHX Text V

AutoCAD SHX Text A

AutoCAD SHX Text O

AutoCAD SHX Text V

AutoCAD SHX Text A

AutoCAD SHX Text O

AutoCAD SHX Text V

AutoCAD SHX Text A

AutoCAD SHX Text O

AutoCAD SHX Text V

AutoCAD SHX Text A

AutoCAD SHX Text O

AutoCAD SHX Text V

AutoCAD SHX Text A

AutoCAD SHX Text O

AutoCAD SHX Text V

AutoCAD SHX Text A

AutoCAD SHX Text O

AutoCAD SHX Text V

AutoCAD SHX Text A

AutoCAD SHX Text O

AutoCAD SHX Text V

AutoCAD SHX Text A

AutoCAD SHX Text O

AutoCAD SHX Text V

AutoCAD SHX Text A

AutoCAD SHX Text A

AutoCAD SHX Text V

AutoCAD SHX Text G

AutoCAD SHX Text A

AutoCAD SHX Text V

AutoCAD SHX Text G

AutoCAD SHX Text A

AutoCAD SHX Text V

AutoCAD SHX Text G

AutoCAD SHX Text A

AutoCAD SHX Text V

AutoCAD SHX Text G

AutoCAD SHX Text A

AutoCAD SHX Text V

AutoCAD SHX Text G

AutoCAD SHX Text A

AutoCAD SHX Text V

AutoCAD SHX Text G

AutoCAD SHX Text A

AutoCAD SHX Text V

AutoCAD SHX Text G

AutoCAD SHX Text A

AutoCAD SHX Text V

AutoCAD SHX Text G

AutoCAD SHX Text A

AutoCAD SHX Text V

AutoCAD SHX Text G

AutoCAD SHX Text A

AutoCAD SHX Text V

AutoCAD SHX Text G

AutoCAD SHX Text A

AutoCAD SHX Text V

AutoCAD SHX Text G

AutoCAD SHX Text A

AutoCAD SHX Text V

AutoCAD SHX Text G

AutoCAD SHX Text A

AutoCAD SHX Text V

AutoCAD SHX Text G

AutoCAD SHX Text A

AutoCAD SHX Text V

AutoCAD SHX Text G

AutoCAD SHX Text A

AutoCAD SHX Text V

AutoCAD SHX Text G

AutoCAD SHX Text A

AutoCAD SHX Text V

AutoCAD SHX Text G

AutoCAD SHX Text A

AutoCAD SHX Text V

AutoCAD SHX Text G

AutoCAD SHX Text A

AutoCAD SHX Text V

AutoCAD SHX Text G

AutoCAD SHX Text A

AutoCAD SHX Text V

AutoCAD SHX Text G

AutoCAD SHX Text A

AutoCAD SHX Text V

AutoCAD SHX Text G

AutoCAD SHX Text A

AutoCAD SHX Text V

AutoCAD SHX Text G

AutoCAD SHX Text A

AutoCAD SHX Text V

AutoCAD SHX Text G

AutoCAD SHX Text A

AutoCAD SHX Text V

AutoCAD SHX Text G

AutoCAD SHX Text A

AutoCAD SHX Text V

AutoCAD SHX Text G

AutoCAD SHX Text A

AutoCAD SHX Text V

AutoCAD SHX Text G

AutoCAD SHX Text A

AutoCAD SHX Text V

AutoCAD SHX Text G

AutoCAD SHX Text A

AutoCAD SHX Text V

AutoCAD SHX Text G

AutoCAD SHX Text A

AutoCAD SHX Text V

AutoCAD SHX Text G

AutoCAD SHX Text A

AutoCAD SHX Text V

AutoCAD SHX Text G

AutoCAD SHX Text A

AutoCAD SHX Text V

AutoCAD SHX Text G

AutoCAD SHX Text S

AutoCAD SHX Text

OXY

AutoCAD SHX Text

VAC

AutoCAD SHX Text

AIR

AutoCAD SHX Text

OXY

AutoCAD SHX Text

VAC

AutoCAD SHX Text

AIR

AutoCAD SHX Text

OXY

AutoCAD SHX Text

VAC

AutoCAD SHX Text

AIR

AutoCAD SHX Text

VAC

AutoCAD SHX Text

AIR

AutoCAD SHX Text

OXY

AutoCAD SHX Text

OXY

AutoCAD SHX Text

VAC

AutoCAD SHX Text

AIR

AutoCAD SHX Text

VAC

AutoCAD SHX Text

AIR

AutoCAD SHX Text

OXY

AutoCAD SHX Text

VAC

AutoCAD SHX Text

AIR

AutoCAD SHX Text

OXY

AutoCAD SHX Text

VAC

AutoCAD SHX Text

AIR

AutoCAD SHX Text

OXY

AutoCAD SHX Text

VAC

AutoCAD SHX Text

AIR

AutoCAD SHX Text

OXY

AutoCAD SHX Text

OXY

AutoCAD SHX Text

VAC

AIR

1A157A

1AC221

1AC222

1AC225

1C483 1C484 1C485 1C486

1C487

1C482

1C481

1C476 1C475

1C474 1C473 1C472

1C471 1C446

1C445 1C444

1C443

1C4421C4411C440

1C439

1C438

1C437

1C436

1C434

1C432 1C430

1C431

1C435

1C460

1C453

1C452

1C451

1C450

1C433

1C417

1C416

1C415

1C418

1C414

1C413

1C412

1C420 1C419 1C410

1C411

1B455 1B454

1B453 1B452

1F160

1F162

1F161

1F158

1F159

1F156

1F157

1F150R

1F150P

1F150N

1F150M

1FELC1

1F150K 1F150L

1F150J

1F150H

1F150G

1F150

1FC01A

1F100 1F101

1F102

1F200

1F103 1F104 1F201

1F106 1F105 1F201A

1FLVC2

1FLVC1

1F107 1F108

1F110 1F1091F202

1F190

1F191

1F192A 1F192B

1F207

1F2061F150S

1F150D

1F152 1F150E

1F150U 1F155

1F150A

1F150F

1F154

1F153

1F150Q

1F150B

1F150C

1F150

1FC03A

1F205

1FC04E

1FC04A

1FC04D

1FC04G 1F204

1FC04H

1F111 1F112

1F114 1F113

1F117

1F115 1F116

1F119 1F118

1F145 1F203

1F1301FELC2

1F132 1F131

1F133 1F134

1F1351F136

1F1371F138

1F139

1F140

1F141

1F142

1F143

1F144

1FC03

1F151

1FC01B

1E382

1E344 1E343

1E333

1E3851E384C

1E384

1E335

1E334

1E384B

1E384A 1E332

1E331

1E320

1E3301E3221E3241E326 1E312

1E311

1E310

1E313

1E3211E3231E325

1E383

1E381

1F516 1F515

1F511

1F554

K106 K108K104 K110

K111

K109

1B456 1B449

1B448

1B447

1B446

1B457

1B442

1B451

1B443 1B444

1B450 1B459

1B458

1B441

1B419 1B418

1B417

1B416

1B430

1B414

1B415

1B411

1B410

1B413

1B420

1B495

1B113 1B103 1B101 1A215

1A216

1A214

1A212

1A108

1A109

1A110

1A112

1A113 1A114 1A115

1A116

1A117 1A118

1A119

1A120

1A121

1A122 1A123

1A124

1A125

1A126

1A127 1A128

1A129

1A130

1A138

1A139

1A137

1A136

1A135 1A134

1A133

1A132

1A131

1A145

1A146

1A147

1A167

1A165

1A163

1A161

1A159

1A157

1A140

1A141 1A142

1A143

1A1441A152

1A151

1A150

1A149 1A148

1A154

1A153

1A171

1A170 1A169

1A156 1A158

1A160 1A162

1A164

1A166

K105 K107

K104B

K107A

K109A

K111A

K112

K103

K102A K104A

K102

K101

K114

K116K117

K113

K115

K118

K119 K120

K121

K122A

K122

K122B

1B521

1B523

1B527

1B522

1B513A 1B526

1B524

1B525

1B5311B532

1B533

1B534 1B536

1B535

1B542

1B5371B538

1B539

1B520

1B519

1B517

1B518

1B516

1B511 1B514

1B512 1B515

1B510

101 102

117A

123124125126

104A

104B

S129D

S129CS129B

S129A

1B127

1A181

1A182

1AC241

1AC242

1AC243

1AC244

1AC245

1AC247

1AC246

1AC251

1AC252

1AC253

1AC223

1AC224

1AC220

1AC289B

1AC289A

1A211

1AC290

1AC288

1AC284

1AC282

1AC281

1AC286

1AC2261AC287

1AC285

1AC227

1AC228 1AC229

1AC232

1AC234

1AC231

1AC235

1AC254

1AC255

1AC256

1AC257

1AC2701AC279

1AC276

1AC274

1AC272

1AC275

1AC262

1AC264

1AC266

1AC268

1AC277

1B351

1E352

1E352A

1E347 1E348 1E351

1E346

1E339

1E337 1E338

1E341

1E349

1D394 1D393

1D392

1D391 1D390

1D371

1D370E 1D370D

1D370C 1D370B

1D370A

1D400D

1D331

1D330

1D311A

1D311C

1D311

1D311B

1D320

1D310

1D310A

1C583

1C582 1C581

1C570 1C560 1C561

1C542 1C541

1C543

1C512

1C514

1C513

1C511

1C

1C5171C5161C545

1C544

1C5711C572

1C546 1C548

1C550 1C552

1C536 1C535 1C534 1C533 1C532 1C531

1C530

1C521

1C519 1C518

1C520

1C547

1C553

1C555

1F326

1F323 1F324

1FC02A

1F319 1F317A

1F315

1F317

1F318

1F316 1F314

1E2901E291

1E288

1E287 1E289

1E2781E279

1E277 1E286 1E285 1E284

1E281 1E281C

1E276

1E274

1E275

1E273 1E272

1E281B

1E271

1E270

1E280

1E281A

K114A

K100

K101A K101B

K105A

K115A

K117A

1C220

SE1 SE2

PE3 PE4 PE5 PE6

PE7 PE8

S1

S2

S3

P1 P2 P3

1F549

ONML

K

J I H G

F

E

B A

A

B

L

D

GH

F

JK

1A217

1B496

1B497

CD

1A210

1A208

PE1

1A101

1A102

1A104

1A105

1A106

1A213

1A155

1A101A

115A

129E

1E422

1E421

1E420

1E423

1E401

1E417 1E416

1E415 1E415A

1E413

1E412

1E411

1E419

1E424

A1E241 B C D E F

L K J

N M I

P O H

R Q G

S T U

X

W V

Y Z

1E340B

1E340A

A

B

CD

E F

G

H

I

J

A B C

DEF

1C470

1E328A

1D600

1E500

1E292

1C488

1B100

1F583 1F582 1F581

1F576 1F555

1F558

1F557 1F535

1F534

1F533

1F532

1F531

1F530

1F528

1F527

1F525

1F523 1F524

1F526

1F553

1F552

1F547

1F548

1F556

1F546

1F545

1F543

1F542

1F522

1F520

1F540

1F544

1F541

1F5601F561

1F562

1F563

1F564

1F570

1F573

1F575

1F574

1F579

1F578

1F577

1F572

1F571

1F569 1F568 1F567

1F565

1F566 1F521

1F551

K

1E418

1C435A

1C434A

1C420A

1E491

1E481

A

B

B

C

D

E

F

1E4821E484

1E480

1E448 1E450 1E452 1E454 1E456 1E458

1E445

1E444

1E443

1E442

1E449 1E451

1E453 1E455

1E457 1E430

1E432 1E433

1E4341E4351E4371E439

1E4361E4381E440

A

1E446

1E246 1E247 1E248 1E249

1E245

1E240

1E244

1E251

1E242

1E252

1E253

1E254

1E255

D

EF

114A

1B580

1B578 1B590

1B579

1B5771B570G

1B570F 1B575

1B573

1B571

1B570D

1B570C

1B570B

1B570A

1B570

1C403A 1C403B

1B5891B576

1B574

1B572 1B582

1B584

1B586

1B587

1B588

1B585

1B583

1B560B

1B581

1B561

1B562 1B564

1B566

1B568

1B566A

1B560

1B560A

1B563

1B567

1B567B

1B567A

1B567C

1F4021F4031F4041F405

1F4001F406

1F407 1F401

1F410

1F412

1F411

1F435 1F437

1F433

1F436

1F432

1F431

1F430 1F426

1F440

1F425

1F424

1F422

1F423

1F421

1F420

1E431A

1G401

1E257

1E256

1B559

1B550A

1B558 1B557 1B556 1B555

1B543B

1B543A

1B543C

1B543D

1B543F

1B543E

1B5441B5451B546

1B5471B549

1B5481B551

1B552

1B553

1B554

1C300D

1E221

1E222

1E211 1E220

1E212 1E210

1E213

1E214 1E215

1E239

1E238 1E231

1E233

1E230

1E232

1E2371E2361E235 1E234

1E200A

1E200B

1E200C

1B453B

1E243B

1E243A

1D123

1B466

1E501

1B268 1B267

1B266

1B263

1B262

1B260

1B258

1B257

1B255

1B253

1B251 1B252

1B250 1B249

1B248

1B2471B254

1B256 1B246

1B245

1B244

1B259

1B261

1B264

1B265

1B226

1B224

1B243 1B230

1B242 1B231

1B241 1B234

1B240 1B236

1B222

1B221

1B223

1B225

1B227

1B228

1B229

1B233

1B235

1B237

1B232

1B211 1B210

1B218

1B214

1B213

1B215

1B216

1B217

1B212

1B218A

1B220

1D122 1D121 1D120 1D119

1D118 1D117

1D116

1D113

1D1141D115

1D112

1D110

1D133

1D134 1D130

1D1321D1311D125 1D124

1D126

1D127 1D129

1D128 1D140 1D139 1D138

1D141

1D210 1D211

1D215 1D137

1D212

1D213

1D214

1D227

1D229

1D230

1D231 1D232 1D233

1D228 1D224 1D223

1D2221D2251D226

1D216 1D217 1D218

1D220

1D219

1D136

1D135

1D235

1D111B 1D111A

1B476

1B474

1B471

1B473

1B475

1B463

1B461 1B472

1B477

1B498

1B499 1B479 1B469

1B478 1B468

1B462

1B464

1B481

1B465

1B467

1B480B

1B4801B480A

1B215B1B215C

1B215A

1B217A

1B224A

1B226A

1B327 1B326

1B320 1B314

1B312

1B311

1B321

1B324 1B322

1B3231B325

1B313

1B310

1B321A

1D133B 1D133A

1 2 3

1D234A 1D234B

1B468A

1B482A

1A111B

1A111A

1A111

1A111C

COOLING

TOWER 1

COOLING

TOWER 4

COOLING

TOWER 3

COOLING

TOWER 2COOLING

TOWER 5

1B589A

BCD

1C211 1C211A

1C213

1C210

1C212

1C214

1C215 1C216

1C223

1C224

1C227 1C228

1C226

1C225

1C222

1C221

1B265A

1B245A

C

E

I

1C334

1C3311C3321C335 1C343

1C333

1C328 1C327

1C329

1C326 1C3251C322

1C324 1C3231C321

1B456A

1E353

1B220A

1A105

1B220B

1B264A

1C349 1C348 1C347 1C346 1C345 1C344

1C341

1C342

1C362 1C359 1C357 1C355 1C353

1C350

1C3521C3541C3561C3581C361

1C371

1C366

1C365

1C364 1C363

1C381

1C372

1C382

1C380 1C383

1C370 1C370A

1C370B

1C300E

1B431

1F312

1F313

1F322

1C1501C166

1C164

1C165

1-D460

CORRIDOR

1-D400

1-D410

1-D420

1-D419

HALL

1-D450

1-D430

1-D471

1D462 1D461 1D459 1D458 1D457 1D456 1D455 1D454 1D453 1D452 1D451

1D463

1D465

1D402 1D401

1D467

1D466

1D450B

1D421 1D422 1D423 1D424 1D425 1D426 1D427 1D428 1D429

1D431

1D432 1D4311D434

1D433

1D464 1D450G1D450F1D450E1D450D

1D450C1D450A

1D420A 1D420C 1D420D 1D420G1D420F1D420E

1C164A

A

B

C

D

E

F

1D480

A

B

C

D

1D483

1D482 1D481

1ST FLOOR - EXISTING

CONDITIONS/LIFE SAFETY PLAN

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

A

F i t h

P

M

FULLY SPRINKLERED

Louis Stokes Cleveland

VA Medical Center

U.S. Department of Veterans Affairs

B

C

D

E

F

A

B

C

D

E

F

21 4 5 6 7 8 9 10

PhaseARCHITECT OF RECORD STAMPCONSULTANTS

321 4 5 6 7 8 9 10

PROVIDE TEMPERATURE AND

HUMIDITY CONTROLS TO SPD

STORAGE

10701 EAST BLVD. CLEVELAND, OHIO

541-21-101

NICK CARROZZA

CJK DAKRevisions: Date:

E T

G

DE

I

RET

S

HCRA

I

KACZMAR

STANLEY

NO. 4988

T

E R

S

ATE

I

T C

J.

O

O

FO

H

COST ESTIMATING:

MCGUINESS UNLIMITED, INC.

15724 STILLWOOD AVE.

CLEVELAND, OH 44111

P. 440.667.5120

ELECTRICAL ENGINEERING:

FFE, INC.

110 BOGGS LANE, SUITE 170

SPRINGDALE, OH 45246

P. 513.522.2107

HAZ. MATERIALS ASSESSMENT:

STEPHEN J. SEBESTA & ASSOC., INC.

30628 DETROIT RD. #258

WESTLAKE, OH 44145

P. 216.781.0060

MECHANICAL ENGINEERING:

HEAPY

1422 EUCLID AVE. SUITE 1162

CLEVELAND, OH 44115

P. 216.862.5846

1468 WEST 9TH STREET #400

CLEVELAND, OH 44113

P. 216.687.1555 F. 216.687.1558 LS-101

FINAL CDs SUBMISSION

11.17.20

65% CD'S SUBMISSION 8.25.20

1" = 30'-0"

EX. CONDITIONS/LIFE SAFETY PLAN

1ST FLOOR

NORTH

1B216

1B589A

1F562

ROOM PERIMETER

WALLS: UNRATED

PARTITIONS

ROOM PERIMETER

WALLS: UNRATED

PARTITIONS

ROOM PERIMETER

WALLS: UNRATED

PARTITIONS

1AC275

ROOM PERIMETER

WALLS: 1 HR FIRE

BARRIERS

1A121

ROOM PERIMETER

WALLS: 1 HR FIRE

BARRIERS

1D215

ROOM PERIMETER

WALLS: UNRATED

PARTITIONS

1B523

ROOM PERIMETER

WALLS: 1 HR FIRE

BARRIERS

100% CD'S SUBMISSION 10.19.20

LIFE SAFETY LEGEND

PROJECT SCOPE BOUNDARY

EXISTING 2 HOUR SMOKE BARRIER

EXISTING 2 HOUR FIRE BARRIER

EXISTING 1 HOUR FIRE BARRIER

EXISTING 1 HOUR SMOKE BARRIER

LIFE SAFETY GENERAL NOTES

1. SEE COVER SHEET FOR APPLICABLE CODE INFORMATION. BUILDING IS

CLASSIFIED AS AN "EXISTING HEALTHCARE OCCUPANCY" PER NFPA 101 2018

4. PROJECT SCOPE LINE IS INDICATED FOR GENERAL INTENT ONLY.

CONTRACTOR WILL COMPLETE ALL WORK REGARDLESS IF IT IS LOCATED

OUTSIDE OF PROJECT SCOPE AREA AS INDICATED ON ANY DRAWING

5. CONTRACTOR TO COVER OR ALTER EXIT SIGNS WHICH, DUE TO

CONSTRUCTION, TEMPORARILY DO NOT DEPICT EXIT PATHS (TYP. OF ALL

EXIT SIGNS IN OR BEYOND PROJECT AREA)

6. TRAVEL DISTANCES OVER 200' WILL REQUIRE INTERIM LIFE SAFETY

MEASURES. COORDINATE WITH VA

7. EXISTING FLOOR SLABS ARE 2 HR FIRE RATED. FOR ALL NEW CORE

DRILLS/UTILITY PENETRATIONS, GC SHALL UTILIZE GROUND PENETRATING

RADAR TO X-RAY EXISTING FLOOR SLAB AT PROPOSED, NEW PENETRATION

LOCATION TO ENSURE THAT FLOOR SLAB REBAR STRUCTURE WILL NOT BE

COMPROMISED, AND SHALL NOTIFY COR AND A/E TEAM OF ANY ISSUES

DISCOVERED IN FIELD. GC SHALL PROVIDE NEW 2 HR RATED THRU-SLAB

FIRESTOP ASSEMBLIES AT ALL PENETRATIONS. FOR EXISTING THRU-SLAB

UTILITIES THAT ARE REMOVED AS A PART OF DEMOLITION SCOPE, GC SHALL

PATCH CONC. SLAB FULLY WITH NEW CONCRETE TO MATCH EXISTING.

8. PROVIDE FIRESTOPPING AT ALL PENETRATIONS THROUGH NEW AND

EXISTING FIRE/SMOKE RATED BARRIER WALLS AND FLOOR SLABS TO COMPLY

WITH THE REQUIRED BARRIER RATINGS. PROVIDE FIRESTOPPING AROUND

TEN (10) PENETRATIONS LESS THAN 6 SQUARE INCHES AND FOUR (4)

PENETRATIONS BETWEEN 16 AND 36 SQUARE INCHES TO COMPLY WITH

REQUIRED RATING NOT ASSOCIATED WITH NEW WORK. LARGER OPENINGS

SHALL BE BROUGHT TO THE ATTENTION OF THE COR. GC SHALL SUBMIT UL

LISTED METHODS FOR PATCHING ALL FIRE BARRIERS THAT MEET THE

MINIMUM FIRE RATING REQUIREMENTS OF THE PENETRATED BARRIER AND

ARE IN COMPLIANCE WITH THE OPENING SIZE AS DICTATED BY THE

ASSEMBLY.

9. TEMPORARY FIRE ALARMS IN CONSTRUCTION AREAS: GC SHALL PROVIDE

TEMPORARY FIRE ALARMS IN ALL CONSTRUCTION AREAS THROUGHOUT THE

CONSTRUCTION DURATION UNTIL SUCH TIME THAT NEW FIRE ALARM SYSTEM

DEVICES ARE INSTALLED, TESTED, AND IN FULL OPERATION. HEAT

DETECTION DEVICES SHALL BE UTILIZED AND SHALL BE CONNECTED TO THE

BUILDING FIRE ALARM SYSTEM AND COORDINATED THROUGH THE VA

ELECTRICAL SHOP. GC SHALL COORDINATE WITH VA SAFETY DEPARTMENT

FOR ALL TEMPORARY FIRE ALARM INSTALLATIONS TO ENSURE COMPLIANCE

WITH SAFETY STANDARDS.

2. LIFE SAFETY PLANS ARE INTENDED TO BE PARTIAL ONLY, AND INDICATE

ONLY THE RATINGS OF THE PARTITIONS OF THE PERIMETER WALLS…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .