Approved 13.02 Topology PACS Products 4.pdf
PDF 3 MB Posted
- Solicitation number
- 36C25723Q0317
About this file
This market research notice seeks information from interested vendors to replace the South Texas Veteran Healthcare System's current C-Cure 9000 Physical Access Control System (PACS) with a turnkey PACS solution. The Department of Veterans Affairs Veterans Health Administration Veterans Integrated Service Network 17 is conducting this market research to define the procurement strategy for a future solicitation. Interested vendors are requested to respond with business information, SAM registration details, and estimated pricing by January 25, 2023. The notice also provides facility drawings, PACS product approval documents, and encourages site visits to support vendor responses. The intent is to determine the availability of small business sources and appropriate set-aside designations for this PACS replacement requirement.
View the file
Other files
Show all 13
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
TO: Kevin Kozlowski
Vice President of Government Initiatives
XTec, Incorporated
5775 Blue Lagoon Drive, Suite 280
Miami, Florida 33126
FROM: Matthew Arnold on behalf of the FIPS 201 Evaluation Program
DATE: 7/21/2021
RE: Approval of Products/Services for Listing on the GSA APL
Office of Management and Budget (OMB) issued M-19-17 that requires Federal
Agencies to procure only qualified products and services listed on the GSA Approved
Products List (APL) when implementing HSPD-12 into their environment. Procurement of approved products and services facilitates the government-wide objective of a federated and interoperable ICAM segment architecture, and ensures compliance, consistency and alignment of commercially-available products and services with the requirements and functional needs of government ICAM implementer.
Accordingly, the FIPS 201 Evaluation Program (Program) is very pleased to inform you that the following product/service has passed testing against all applicable Testing
Requirements. Please see the attached document that summarizes the specific parameters of the approval (e.g., product/service profile, what your product/service was tested with).
Your product/service will now be listed on the APL as shown below. If there are any errors in the listing information, please notify me within five (5) business days of receiving this letter.
1 Category – PIV Reader
1.1 APL Certification Number
● (APL #10078) X10000 Contact Smart Card Reader w/PIN pad
● (APL #10079) X10000BIO Contact Smart Card Reader w/PIN pad and BIO
● (APL #10080) X9900 Contact Smart Card Reader
● (APL #10081) X9907 Contact Smart Card Reader w/PIN pad
● (APL #10082) X9921 Contactless Smart Card Reader
1.2 Product/Service Information
Organization Name: XTec, Incorporated Name of Product or Service: XTec X10000 Contact Smart Card Reader w/PIN pad
Part Number: X10000 Hardware Version: N/A Software Version: N/A Firmware Version: 2.0
TAA Compliant: Yes
Name of Product or Service: XTec X10000BIO Contact Smart Card Reader w/PIN pad and Biometric Reader Part Number: X10000BIO
Hardware Version: N/A Software Version: N/A Firmware Version: 20.
Name of Product or Service: XTec X9900 Contact Smart Card Reader
Part Number: X9900 Hardware Version: N/A Software Version: N/A
Name of Product or Service: XTec X9907 Contact Smart Card Reader w/PIN Pad
Part Number: X9907 Hardware Version: N/A
Software Version: N/A
Name of Product or Service: XTec X9921 Contactless Smart Card Reader
Part Number: X9921 Hardware Version: N/A Software Version: N/A
1.3 Document History
Status Date Comments
Approved 3/4/2016 Final Approval Date for APL# 10077 - 10082
Update 7/21/2021 Update approval under FRTC 1.3.3, split PCAS and
Readers into separate letters.
1.4 Restrictions:
This product has been tested and approved as a component of a fully compliant FICAM
Solution. The end to end solution components used to test the FICAM compliance of the approved solution are listed below.
1.1.1 PACS Topology 13.02
Solution 1
● PACS Infrastructure and Validation Infrastructure (APL #10077) o XTec AuthentX ePACS cloud based, web-enabled PACS
Approval of the above product/service indicates your cooperation with the Program and successful testing against a rigorous, comprehensive set of functional requirements derived from government-wide specifications. Testing included positive and negative test cases, and threat vectors.
Given the strategic government-wide importance of the APL, the scope and extent of testing performed on your product/service, and the rigor of that testing, the Program would like to acknowledge the noteworthiness of the approval and listing. Your product/service will now be available to all Federal Agencies for procurement.
Please note that continued listing on the APL requires ongoing conformance to all applicable requirements, including requirements added or amended over time. A listed product/service can become non-conformant for various reasons including but not limited to:
● Failure to pass testing against new and revised requirements before the effective date of the new/revised requirements.
● Problems discovered in your listed product/service (or class of product/service) are not addressed within time frames specified by the Program.
Refer to applicable Agreements and Program documents for specific details regarding ongoing compliance including severity levels and remediation time frames. Listed products and services that fall out of conformance will be removed from the APL and added to the Removed Products List (RPL).
If you have any questions, please feel free to contact me.
Matthew Arnold
GSA OGP
(703) 254-6750 (Cell)
Matthew.Arnold@gsa.gov
| 2021-08-05T15:24:38-0400 | |
| MATTHEW ARNOLD |
File details come from the government source that posted it. Updated .