Appendix C - TIOH Medal - Exceptional Service.pdf
PDF 60 KB Posted
- Attached to
- Award & Decoration Sets Federal contract opportunity
- Solicitation number
- 20149552
About this file
This document is a Detail Specification Sheet for the U.S. Border Patrol's Commissioner's Exceptional Service Award decoration. The specification details two medal sizes (regular and miniature) made of Red Brass 85/15, with a 24K gold-plated epoxy resin finish matching The Institute of Heraldry's Metal Finish Chip Number 8. The decoration set includes a regular size medal (1-1/2 inches diameter), a miniature size medal (3/4 inch diameter), and a service ribbon, all packaged in a presentation case conforming to MIL-C-14633.
Technical specifications include precise thickness tolerances (0.147 ± 0.010 inch for regular size, 0.090 ± 0.010 inch for miniature), a green (#12) enamel color requirement, and specific soldering instructions for attachment rings. The document is a military specification (MIL-DTL-3943/285C) dated 8 October 2019, superseding the previous version from 15 December 2014, and is approved for use by all Departments and Agencies of the Department of Defense.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Amendment 1 Questions and Answers RFQ 20149552.pdf | ||
| FY25 Awards_Decorations SOW.pdf | ||
| Appendix A - TIOH Medal - Meritorious Service.pdf | ||
| Appendix B - TIOH Medal - Excellence in Group.pdf | ||
| Combined SS Awards_Decorations 2025.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
AMSC N/A FSC 8455
DETAIL SPECIFICATION SHEET
DECORATION, COMMISSIONER'S EXCEPTIONAL SERVICE AWARD,
U.S. BORDER PATROL
This specification is approved for use by all Departments and Agencies of the Department of Defense
The requirements for acquiring the product described herein shall consist of this specification sheet and the latest issue of MIL-DTL-3943.
DASH NO.:
-1: Regular Size -2: Miniature Size
MATERIAL: Red Brass 85/15 (UNS Alloy No. C-230)
FINISH: Epoxy resin, 24K Gold Plated, Matte Finish, Polished Highlights and shall match The Institute of Heraldry (TIOH) Metal Finish Chip Number 8.
DIMENSIONS:
DIAMETER (Circumscribed, excluding lug):
-1: 1-1/2 inches (REF) -2: 3/4 inch (REF) THICKNESS (At thickest point)
-1: 0.147 0.010 inch
-2: 0.090 0.010 inch
INCH-POUND
MIL-DTL-3943/285C
8 October 2019
SUPERSEDING
MIL-DTL-3943/285B
15 December 2014
OBVERSE REVERSE
Source: http://assist.dla.mil -- Downloaded: 2024-04-26T16:54Z Check the source to verify that this is the current version before use.
MIL-DTL-3943/285C
DECORATION SET: Decoration set shall consist of a regular size medal, a miniature size medal, and a service ribbon all packaged in a presentation case conforming to MIL-C-14633, Type VIII, Class 2A or 4 pad.
EPOXY: Epoxy enamel shall be applied to the Decoration as indicated above, and shall match TIOH Hard Enamel Color Chip Numbers listed below. Hard cloisonné enamel may be used in lieu of epoxy. If hard cloisonné enamel is used, the required base material shall be Gilding Metal 95/5 (UNS Alloy C-210).
TIOH HARD ENAMEL COLOR CHIPS
COLOR CHIP NUMBER
Green #12
NOTES:
1. The term (REF) refers to the measurements taken from the Government furnished hub or die.
2. A ring shall be soldered on the reverse of the medallion centered in the star point and 1/32 inch above the lettering on the regular size decoration (-1). On the miniature size decoration (-2), a ring shall be soldered at the tip of the star point so that the lettering is clearly visible.
3. The specification slash sheet for the ribbon for the pendant drape and for the service ribbon is MIL-DTL-11589/555.
CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.
Custodian: Preparing activity:
Army - IH Army - IH
Review activity: (Project No. 8455-2019-394)
DLA - CT
NOTE: The activities listed above were interested in this document as of the date of this document.
Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https://assist.dla.mil.
Source: http://assist.dla.mil -- Downloaded: 2024-04-26T16:54Z Check the source to verify that this is the current version before use.
https://assist.dla.mil/
File details come from the government source that posted it. Updated .