Appendix A - TIOH Medal - Meritorious Service.pdf
PDF 65 KB Posted
- Attached to
- Award & Decoration Sets Federal contract opportunity
- Solicitation number
- 20149552
About this file
This detail specification sheet defines the technical requirements for a U.S. Border Patrol Commissioner's Meritorious Service or Meritorious Achievement Award decoration. The specification covers two medal sizes (regular and miniature) made from Red Brass 85/15 with specific dimensional requirements: the regular size is 1-3/8 inches in diameter with 0.165 ± 0.010 inch thickness, while the miniature size is 11/16 inch in diameter with 0.130 ± 0.010 inch thickness. The medal's finish must be nickel plated, silver plated, oxidized, relieved, with polished highlights matching The Institute of Heraldry Metal Finish Chip Number 15. The decoration set includes a regular size medal, miniature medal, and service ribbon, all packaged in a presentation case conforming to MIL-DTL-14633, Type XVI, Class 1 or 3 pad. This specification is approved for use by all Departments and Agencies of the Department of Defense and supersedes the previous version dated 20 November 2017.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Amendment 1 Questions and Answers RFQ 20149552.pdf | ||
| FY25 Awards_Decorations SOW.pdf | ||
| Combined SS Awards_Decorations 2025.pdf | ||
| Appendix C - TIOH Medal - Exceptional Service.pdf | ||
| Appendix B - TIOH Medal - Excellence in Group.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
AMSC N/A
FSC 8455
DETAIL SPECIFICATION SHEET
DECORATION, COMMISSIONER'S MERITORIOUS SERVICE OR MERITORIOUS
ACHIEVEMENT AWARD, U.S. BORDER PATROL
This specification is approved for use by all
Departments and Agencies of the Department of Defense
The requirements for acquiring the product described herein shall consist of this specification sheet and the latest issue of MIL-DTL-3943.
DASH NO.
-1: Regular Size -2: Miniature Size
MATERIAL: (-1 and -2) Red Brass 85/15 (UNS Alloy No. C-230)
FINISH: (-1 and -2) Nickel Plated, Silver Plated, Oxidized, Relieved, Polished Highlights and shall match The Institute of Heraldry Metal Finish Chip Number 15.
DIMENSIONS:
DIAMETER (Circumscribed excluding lug):
-1: 1-3/8 inches (REF) -2: 11/16 inch (REF)
NOT MEASUREMENT
SENSITIVE
MIL-DTL-3943/293C(IH)
12 September 2022
SUPERSEDING
MIL-DTL-3943/293B(IH)
20 November 2017
OBVERSE REVERSE
Source: http://assist.dla.mil -- Downloaded: 2024-04-26T16:56Z Check the source to verify that this is the current version before use.
MIL-DTL-3943/293C(IH)
THICKNESS (At thickest point):
-1: 0.165 0.010 inch.
-2: 0.130 0.010 inch.
DECORATION SET AND CASE: Decoration set shall consist of a regular size medal, a miniature size medal, and a service ribbon all packaged in a presentation case conforming to MIL-DTL-14633, Type XVI, Class 1 or 3 pad.
NOTES:
1. The term (REF) refers to the measurements taken from the Government furnished hub or die.
2. The specification slash sheet for the ribbon for the pendant drape is MIL-DTL-11589/552.
CHANGES FROM PREVIOUS ISSUE: The margins of this specification are marked with vertical lines to indicate where changes from the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous issue.
Custodian: Preparing activity:
Army - IH Army - IH
Review Activity: (Project No. 8455-2022-265)
DLA - CT
NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https://assist.dla.mil.
Source: http://assist.dla.mil -- Downloaded: 2024-04-26T16:56Z Check the source to verify that this is the current version before use.
https://assist.dla.mil/
File details come from the government source that posted it. Updated .