Appendix B - Safety Specifications.pdf

PDF 120 KB Posted

Attached to
Fuel Flow Transmitter Test Stand Federal contract opportunity
Solicitation number
FA812625Q0059
Issued by
Department of the Air Force Materiel Command Air Force Sustainment Center

About this file

This document is a 2024 Appendix B containing Safety Specifications for a Universal Fuel Accessories Test Stand located in Building 3902. The safety specifications outline comprehensive requirements for contractor safety programs, with a focus on protecting government personnel and property. Key requirements include immediate mishap notification to the procuring Safety Office within one hour of any incident, with a detailed written report to be submitted within three calendar days, and the provision of specific incident details such as location, cause, estimated cost, and corrective actions.

The document specifies safety program elements that must be addressed, referencing benchmarks including OSHA Standards (29 CFR 1910 and 1926), DAFMAN 91-203, DAFI 91-207, and NFPA standards. These elements cover critical areas such as housekeeping, material handling equipment, handling of flammable/combustible liquids, vehicle operations, hazardous energy control, and fire protection. The safety provisions apply to the contractor and any subcontractors, with the understanding that requirements not relevant to specific operations may be mutually deemed self-deleting by the contractor and procuring office.

View the file

Other files for this federal contract opportunity

Show all 21

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

APPENDIX B

SAFETY SPECIFICATIONS

FOR

UNIVERSAL FUEL ACCESSORIES TEST STAND

IN BUILDING 3902

SECTION I – GENERAL REQUIREMENTS

A. Safety Program Requirements. The contractor will implement a safety program that ensures protection of Government personnel and property. The program will consist of, at a minimum:

1. Mishap notification/reporting as defined in paragraph B below.

2. A Safety Program that addresses, at a minimum, the subjects listed in Safety Program

Elements, Section II and to be used during performance of the work described in the contract.

B. Mishap Notification

1. The Contractor shall notify the procuring Safety Office or a designated Government

Representative (GR) within one (1) hour of all mishaps or incidents. A written report of the mishap/incident shall be sent within three calendar days to the GR, who will forward it to the Procuring Safety Office. For information not available at the time of initial written report, the contractor shall provide the remaining information no later than 20 calendar days after the mishap, unless extended by the Safety Office.

2. Mishap notifications shall contain, as a minimum, the following information:

a. Contract, Contract Number, Name and Title of Person(s) Reporting

b. Date, Time, and exact location of accident/incident

c. Brief narrative of accident/incident (Events leading to accident/incident)

d. Cause of accident/incident, if known

e. Estimated cost of accident/incident (material and labor to repair/replace)

f. Nomenclature of equipment and personnel involved in accident/incident

g. Corrective actions (taken or proposed)

h. Other pertinent information

3. If requested by the designated government representative, the contractor shall immediately secure the mishap scene/damaged property and impound pertinent maintenance and training records until released by the Procuring Safey Office.

C. The safety provisions of this contract shall apply to any subcontracts/subcontractors.

D. Safety requirements listed herein that do not concern contractor’s operations or services shall be considered self-deleting as mutually agreed by the contractor and the procuring office.

SECTION II – SAFETY PROGRAM ELEMENTS

The contractor’s Safety Program shall clearly define procedures, personnel qualifications, facilities, and required equipment necessary to fulfill the following elements:

Element/Requirement Referenced Benchmark

OSHA Standards for General Industry 29 CFR 1910

OSHA Standards for Construction 29 CFR 1926

Housekeeping DAFMAN 91-203

Material Handling Equipment (MHE) DAFMAN 91-203

Handling, Storage and Use of Flammable/Combustible Liquid

DAFMAN 91-203

Vehicle Operations DAFI 91-207

Hazardous Energy Control DAFMAN 91-203

Fire Protection NFPA 1, 11, 12, 16, 70, 70E, 79

SECTION III – BIBLIOGRAPHY OF PUBLICATIONS/DIRECTIVES

These publications/directives and all supplements/changes thereto apply to the extent required by the provisions of Sections I and II.

DAFI 91-204 Apr 15 Safety Investigations and Reports

DAFI 91-207 May 15 USAF Traffic Safety Program

DAFMAN 91-203 Jun 12 Air Force Consolidated Occupational Safety Standard

DAFMAN 91-203 Jun 12 Confined Space (Chapter 23)

DAFMAN 91-203 Jun 12 Welding, Cutting, and Blazing (Chapter 27)

DAFMAN 91-203 Jun 12 Flightline and Ground Operations (Chapter 24)

DAFMAN 91-203 Jun 12 Housekeeping (Chapter 5)

NFPA 1, 11, 12, 16, 70,

70E, 79

Oct 09 Fire Protection Program

29 CFR 1910 OSHA Standards for General Industry

29 CFR 1926 OSHA Standards for Construction

File details come from the government source that posted it. Updated .