App G-WDW Roadway Signage Style Guide_062023.pdf

Fabrication Design Lead, Checked:

Drawn By:

Graphic Design Lead:

Project Area:

Creative Lead:

Show Writer:

Operations / Requestor:

ODS Graphic Firm:

04/01/2022

NOTICES

ISSUED FOR

REVISIONS

KEY PERSONS

DRAWING NO.:

WDW Roadway Signage Style Guide

Sheet Title:

ED&E Manager:

ORIGINAL DRAWING ON 11” X 17” SHEET

The data in this document incorporates proprietary rights of Imagineering.

Any party accepting this document does so in confidence and agrees that it shall not be duplicated, in whole or in part, nor disclosed to others, without the written consent of Imagineering.

Contractor shall verify all conditions on the job site and notify the project engineer of any variations from the dimensions shown on these drawings before proceeding with any construction. CDV05

Production Responsibility PROJECT / EDMS CODE NO.:

REVISION #:Phase:

STYLE GUIDE DRAWING ONLY, NOT FOR CONSTRUCTION

1365 Avenue of the Stars, Lake Buena Vista, FL 32830

(407) 560-6500

00/00/0000

This document is for your review and approval. The information within is based on discussions with the Walt Disney Imagineering Project Team. Signing the index constitutes acceptance of the sheets within this package.

November 04, 2022WDW Roadway Signage Style Guide

SHEE T NO. DESCR IP T ION MO UNTINGQT Y. P OWER / DATA EST. W T. NOTES DATE

RE V IS IONISSUE

NO.DATEPKG

TBD100

Graphic Index

TBD100 Graphics Index -- -- -- -- -- -- -- -- -- TBD101 General Notes -- -- -- -- -- -- -- -- -- TBD102.00 Signs at a Glance -- -- -- -- -- -- -- -- -- TBD102.01 Signs at a Glance -- -- -- -- -- -- -- -- --

A-TYPE.00 Regulatory Sign Type A -- Ground Mounted -- -- -- -- -- -- --

B-TYPE.00 Warning Sign Type B -- Ground Mounted -- -- -- -- -- -- --

C-TYPE.00 Guide Sign Type C -- Ground Mounted -- -- -- -- -- -- -- C-TYPE.01 Guide Sign Type C -- Ground Mounted -- -- -- -- -- -- -- C-TYPE.02 Guide Sign Type C -- Ground Mounted -- -- -- -- -- -- --

D-TYPE.00 Street Names Sign Type D -- Ground Mounted -- -- -- -- -- -- -- D-TYPE.01 Street Names Sign Type D -- Ground Mounted -- -- -- -- -- -- --

E-TYPE-1.00 Directional Sign Type E1 -- Ground Mounted -- -- -- -- -- -- -- E-TYPE-1.01 Directional Sign Type E1 -- Ground Mounted -- -- -- -- -- -- -- E-TYPE-1.02 Directional Sign Type E1 -- Ground Mounted -- -- -- -- -- -- -- E-TYPE-1.03 Directional Sign Type E1 -- Ground Mounted -- -- -- -- -- -- -- E-TYPE-2.00 Directional Sign Type E2 -- Ground Mounted -- -- -- -- -- -- -- E-TYPE-2.01 Directional Sign Type E2 -- Ground Mounted -- -- -- -- -- -- -- E-TYPE-2.02 Directional Sign Type E2 -- Ground Mounted -- -- -- -- -- -- --

F-TYPE-1.00 Directional Sign Type F - Retired Sign Type -- -- -- -- -- -- -- -- --

G-TYPE-1.00 Overhead Sign Type G1 -- Overhead Mounted -- -- -- -- -- -- -- G-TYPE-1.01 Overhead Sign Type G1 -- Overhead Mounted -- -- -- -- -- -- -- G-TYPE-2.00 Overhead Sign Type G2 -- Overhead Mounted -- -- -- -- -- -- -- G-TYPE-2.01 Overhead Sign Type G2 -- Overhead Mounted -- -- -- -- -- -- -- G-TYPE-2.02 Overhead Sign Type G2 -- Overhead Mounted -- -- -- -- -- -- -- G-TYPE-3.00 Overhead Sign Type G3 -- Overhead Mounted -- -- -- -- -- -- -- G-TYPE-3.01 Overhead Sign Type G3 -- Overhead Mounted -- -- -- -- -- -- -- G-TYPE-3.02 Overhead Sign Type G3 -- Overhead Mounted -- -- -- -- -- -- -- G-TYPE-3.03 Overhead Sign Type G3 -- Overhead Mounted -- -- -- -- -- -- -- G-TYPE-4.00 Overhead Sign Type G4 -- Overhead Mounted -- -- -- -- -- -- -- G-TYPE-4.01 Overhead Sign Type G4 -- Overhead Mounted -- -- -- -- -- -- --

H-TYPE-1.00 Directional Sign Type H1 -- Ground Mounted -- -- -- -- -- -- -- H-TYPE-1.01 Directional Sign Type H1 -- Ground Mounted -- -- -- -- -- -- -- H-TYPE-1.02 Directional Sign Type H1 -- Ground Mounted -- -- -- -- -- -- -- H-TYPE-1.03 Directional Sign Type H1 -- Ground Mounted -- -- -- -- -- -- -- H-TYPE-2.00 Directional Sign Type H2 -- Ground Mounted -- -- -- -- -- -- -- H-TYPE-2.01 Directional Sign Type H2 -- Ground Mounted -- -- -- -- -- -- -- H-TYPE-2.02 Directional Sign Type H2 -- Ground Mounted -- -- -- -- -- -- -- H-TYPE-2.03 Directional Sign Type H2 -- Ground Mounted -- -- -- -- -- -- -- H-TYPE-3.00 Directional Sign Type H3 -- Ground Mounted -- -- -- -- -- -- -- H-TYPE-3.01 Directional Sign Type H3 -- Ground Mounted -- -- -- -- -- -- -- H-TYPE-4.00 Directional Sign Type H4 -- Ground Mounted -- -- -- -- -- -- -- H-TYPE-4.01 Directional Sign Type H4 -- Ground Mounted -- -- -- -- -- -- --

Graphic Design Lead:

Project Area:

Creative Lead:

Show Writer:

Operations / Requestor:

ODS Graphic Firm:

04/01/2022

NOTICES

ISSUED FOR

REVISIONS

KEY PERSONS

DRAWING NO.:

WDW Roadway Signage Style Guide

Sheet Title:

ED&E Manager:

ORIGINAL DRAWING ON 11” X 17” SHEET

The data in this document incorporates proprietary rights of Imagineering.

Any party accepting this document does so in confidence and agrees that it shall not be duplicated, in whole or in part, nor disclosed to others, without the written consent of Imagineering.

Contractor shall verify all conditions on the job site and notify the project engineer of any variations from the dimensions shown on these drawings before proceeding with any construction. CDV05

Production Responsibility PROJECT / EDMS CODE NO.:

REVISION #:Phase:

STYLE GUIDE DRAWING ONLY, NOT FOR CONSTRUCTION

1365 Avenue of the Stars, Lake Buena Vista, FL 32830

(407) 560-6500

00/00/0000

RSSG101

General Notes

Quality Assurance:

1. Fabricator qualifications: Fabricator for this type of work shall have in-house, broad knowledge, appropriate computer programs, diverse shop and field experience, flexibility, coordinating ability, skilled craftsmen, and physical plant necessary to perform, produce, fabricate quality products equivalent to or better than similar products in use at the Walt Disney World Parks and Resorts.

2. In the case where certain portions of the scope of work require the need for the fabricator to outsource, the fabricator will be required to provide a list of sub contractors and their qualifications prior to proceeding with that portion of work.

3. For all fabricated work performed by the vendor, WDI will require all structural welds to be inspected by a qualified inspection agency and/or the WDW Quality Assurance Group prior to final finishes being applied.

Refer to Graphic Specifications 104011

4. Overhead Safety: All Sign and graphics that will be installed overhead will be required to meet or exceed the WDW overhead safety guidelines. Refer to ISTD-191014 Rev C

Design Criteria:

1. Details on Drawings indicate a design approach for sign structures but do not necessarily include all fabrication details required for the complete structural integrity of the signs. It shall be the responsibility of the sign fabricator to perform the complete structural design of the signs and to incorporate all the reasonable safety factors necessary to protect the owner and sign fabricator against public liability.

2. Fabrication and installation design: Unless otherwise directed by Owner, design to withstand severe guest abuse and souvenir theft vandalism, but not less than equivalent of resisting simple hand implements and tools (screwdrivers, knives, coins, keys, and similar items), and adult physical force for approximately 10 minutes.

3. Electrical design: Sign fabricator shall perform complete electrical design for illuminated signs. Major illuminated signs shall be designed by an electrical engineer.

a. Provide lighting medium indicated on Drawings.

b. Provide lightning grounding for ground set signs or connection to existing lightning grounding.

c. Submit calculations signed and sealed by a registered professional engineer in the State of Florida, to Owner for review.

d. Submit certification of conformance to UL requirements for sign construction and label sign with UL certification.

Shop Drawings:

1. It is the responsibility of the sign vendor to provide complete fabrication and installation drawings for each sign type, which include detailed scale layouts of each sign face with all graphic elements, fabrication, and installation details. This includes types and locations of fasteners, attachments, joint details, internal frames, reinforcements, support backing, and connection to support structure or mounting surfaces.

Fabrication General:

1. Intent of Specifications: It is intended that all finished work be of the highest quality to pass eye-level examination and scrutiny by the designer, fabrication designer and art director.

2. Copy application: All sign copy shall be crisp, sharp, clean, and free from "ticks," discontinuous curves, line waver, and similar type imperfections.

3. All letter forms shall conform to prescribed proportions.

4. All letter forms shall be aligned so as to maintain a baseline parallel to the sign format, with margins and layout as indicated on design drawings and approved shop drawings.

5. Construct all work to eliminate burrs, cutting edges and sharp corners.

6. Qualifications: Welding must be performed by operators who are currently qualified by tests as prescribed in AWS D1.1, D1.2, or D1.3, as applicable, and certified by a recognized building or code authority.

Submit qualifying data and certification to Owner for approval. Welding must conform to the acceptable requirements of AWS D1.1, D1.2 and D1.3 and MPS 11-0099.

7. Finish welds on exposed surfaces to be imperceptible in the finished work.

8. Except as indicated or directed otherwise, finish all surfaces smooth.

9. Surfaces which are intended to be flat shall be without bulges, oil-canning, or other physical deformities; use thicker materials or other means of stiffening or reinforcement to achieve intended results.

10. Parts indicated to be turned must be accurately machined/worked from solid stock to dimensions indicated or on approved shop drawings.

Finished surfaces to be polished smooth unless otherwise indicated or directed by owner, free of any visible pits, voids, or similar defects.

11. Except where approved otherwise by owner, conceal all fasteners.

12. Make all signs tight fitting, between parts and sections, and with adjacent surfaces. Unless indicated otherwise, non-welded joints between various portions of signs must be weatherproof (for exterior signs) and have tight, hairline-type appearance, without gaps (varying or otherwise). Provide sufficient fastenings to preclude looseness, racking, or similar movement.

13. Conform with manufacturer's recommended fabricating procedures regarding fastening, restraining, expansion, and contraction of dissimilar materials.

14. Exercise care to assure that finished surfaces are unblemished in the completed work.

15. Isolate dissimilar materials. Exercise particular care to isolate non-ferrous metals from ferrous metals, including fasteners.

16. Verify or otherwise ensure that all support/anchorage, whether or not furnished or installed as part of the work is completely satisfactory for supporting/anchoring or otherwise mounting the work or signs.

17. Finish sheen of copy to match sheen of copy panel background (gloss, semi-gloss, or sheens between). Edges of letters shall be straight and corners sharp. Surface of letters shall be uniform in color, finish and free from pinholes and other imperfections.

18. CNC Laser Cutting, Abrasive Water-Jet Cutting and routing shall be done in such manner that edges and corners of finished letter forms shall be sharp and true. Letter forms with nicked, cut, ragged, rounded (positive or negative) corners, and similar disfigurements will not be acceptable. Letter forms shall be aligned so as to maintain a base line parallel to the sign format, with margins and layout as indicated on design Drawings and approved shop drawings. Vertical strokes shall be plumb. Mechanically fasten center of letters to acrylic plastic as required.

19. Mechanical Fasteners must be flush (flat head), tamper proof and match finish and type of material being fastened, unless indicating otherwise.

20. Access Panels shall be precision cut to .05 tolerances and flush mounted with the body of the cabinet. All fasteners are to be Counter Sunk, S/S, and machine type. Self-tapping fasteners of any type will not be accepted. All fasteners are to be drilled and tapped and have “Anti Seize” applied to the threads prior to assembly.

21. Metal thickness: Provide metal thicknesses most appropriate for the fabrication conditions.

22. It is the responsibility of the sign vendor to schedule reviews of signs in production with owner for approvals. Review meetings are to be scheduled at the convenience of the Owner.

Warranty:

A. Warrant work against failure because of faulty materials, workmanship, and design for a period of one year from the date of installation.

B Fading, cracking, warping, peeling, delaminating, rusting, corroding, and structural failure, including distortion by whatever cause, shall be construed as failure because of faulty materials and workmanship.

C. Failures during warranty period shall be repaired or replaced to satisfaction of Owner.

General Notes

Graphic Design Lead:

Project Area:

Creative Lead:

Show Writer:

Operations / Requestor:

ODS Graphic Firm:

04/01/2022

NOTICES

ISSUED FOR

REVISIONS

KEY PERSONS

DRAWING NO.:

WDW Roadway Signage Style Guide

Sheet Title:

ED&E Manager:

ORIGINAL DRAWING ON 11” X 17” SHEET

The data in this document incorporates proprietary rights of Imagineering.

Any party accepting this document does so in confidence and agrees that it shall not be duplicated, in whole or in part, nor disclosed to others, without the written consent of Imagineering.

Contractor shall verify all conditions on the job site and notify the project engineer of any variations from the dimensions shown on these drawings before proceeding with any construction. CDV05

Production Responsibility PROJECT / EDMS CODE NO.:

REVISION #:Phase:

STYLE GUIDE DRAWING ONLY, NOT FOR CONSTRUCTION

1365 Avenue of the Stars, Lake Buena Vista, FL 32830

(407) 560-6500

00/00/0000

RSSG102.00

Signs at a Glance

RSSG102.00

Front View - Signs at a Glance Not to Scale

A-TYPE.00 Regulatory Sign Type A B-TYPE.00 Warning Sign Type B C-TYPE.00 Regulatory Sign Type C C-TYPE.01 C-TYPE.01 C-TYPE.02 E-TYPE-1.02

F-TYPE-1.00 Directional Sign Type F1 F-TYPE-1.00 Directional Sign Type F2 G-TYPE-1.00 Directional Sign Type G1 G-TYPE-2.00 Directional Sign Type G2

G-TYPE-3.00 Directional Sign Type G3 G-TYPE-4.00 Directional Sign Type G4

E-TYPE-1.00 Directional Sign Type E1D-TYPE.00 Street Names Sign Type D

E-TYPE-2.00 Directional Sign Type E2

Destination One

Destination Two & Second Line

G-TYPE-3.02G-TYPE-2.02 G-TYPE-3.03

DIRECTION

Destination One Destination Two & Second Line

STRAIGHT AHEAD

Exit To

DIRECTION

Destination One & 2nd Line

Destination One

DIRECTION

To

To Destination One & Second Line Destination Two Destination Three

DIRECTION

Destination One Destination Two

To 417 TPIKE SOUTH Airport

Destination One & Second Line Destination Two Destination Three

DIRECTION

Destination One & Second Line Destination Two Destination Three

DIRECTION

RETIRED SIGN

TYPE - DO NOT USE

RETIRED SIGN

TYPE - DO NOT USE

Disney Vacation Club Way

EXIT ONLY

Graphic Design Lead:

Project Area:

Creative Lead:

Show Writer:

Operations / Requestor:

ODS Graphic Firm:

04/01/2022

NOTICES

ISSUED FOR

REVISIONS

KEY PERSONS

DRAWING NO.:

WDW Roadway Signage Style Guide

Sheet Title:

ED&E Manager:

ORIGINAL DRAWING ON 11” X 17” SHEET

The data in this document incorporates proprietary rights of Imagineering.

Any party accepting this document does so in confidence and agrees that it shall not be duplicated, in whole or in part, nor disclosed to others, without the written consent of Imagineering.

Contractor shall verify all conditions on the job site and notify the project engineer of any variations from the dimensions shown on these drawings before proceeding with any construction. CDV05

Production Responsibility PROJECT / EDMS CODE NO.:

REVISION #:Phase:

STYLE GUIDE DRAWING ONLY, NOT FOR CONSTRUCTION

1365 Avenue of the Stars, Lake Buena Vista, FL 32830

(407) 560-6500

H-TYPE-3.00 Large Directional Sign Type H3

Destination One Destination Two & Second Line

DIRECTION

H-TYPE-4.00 Large Directional Sign Type H4

Destination One & Second Line

Destination Two

Destination Three

H-TYPE-1.02 H-TYPE-2.02 H-TYPE-2.03H-TYPE-1.03H-TYPE-1.00 Large Directional Sign Type H1 H-TYPE-2.00 Large Directional Sign Type H2

Destination One Destination Two & Second Line Destination Three

Destination One Destination Two & Second Line

DIRECTION

Destination One Destination Two

DIRECTION

Destination One To

DIRECTION

Destination One Destination Two

Destination One To

RSSG102.01

Signs at a Glance

RSSG102.01

Front View - Signs at a Glance Not to Scale - Preview Only

Graphic Design Lead:

Project Area:

Creative Lead:

Show Writer:

Operations / Requestor:

ODS Graphic Firm:

04/01/2022

NOTICES

ISSUED FOR

REVISIONS

KEY PERSONS

DRAWING NO.:

WDW Roadway Signage Style Guide

Sheet Title:

ED&E Manager:

ORIGINAL DRAWING ON 11” X 17” SHEET

The data in this document incorporates proprietary rights of Imagineering.

Any party accepting this document does so in confidence and agrees that it shall not be duplicated, in whole or in part, nor disclosed to others, without the written consent of Imagineering.

Contractor shall verify all conditions on the job site and notify the project engineer of any variations from the dimensions shown on these drawings before proceeding with any construction. CDV05

Production Responsibility PROJECT / EDMS CODE NO.:

REVISION #:Phase:

STYLE GUIDE DRAWING ONLY, NOT FOR CONSTRUCTION

1365 Avenue of the Stars, Lake Buena Vista, FL 32830

(407) 560-6500

1. 2. 3.

4"

4"

7' -0

Fr om F in is h G ra de

2' -0

4"

4"

A s

N ee de d fo r S m al l S ig ns

A s

N ee de d fo r l ar ge

S ig ns

R 1 1/2"

C-02

C-03

C-01

A-TYPE.00

Front View - Typical Scale: 1/2"=1'-0"

A-TYPE.00

Side View - Typical Scale: 1/2"=1'-0"

A-TYPE.00

Back View - Typical Scale: 1/2"=1'-0" Regulatory Sign Type A

A-TYPE.00

GENERAL NOTES

COLOR SCHEDULE

MP03597 - Indigo Semi-Gloss

C-01

MP12106 - Fordson Blue Semi-Gloss

C-02

MP08091 - Yellow Blast Semi-Gloss

C-03

1. 1/8" Aluminum panel with reflective vinyl graphics first surface. Sign panels are to be digitally printed using 3M™ Diamond Grade™ DG³ Reflective Sheeting 4090DS using 3M materials component system.

2. Refer to MUTCD viewing distance index for proper panel size.

3. Refer to MUTCD signage index for proper panel artwork.

4. Sign panels mount to support tube through aluminum Z-Bar with flathead countersunk bolts and U-bolt fasteners. Flathead bolts patched with reflective vinyl on sign face.

5. 4" Round pipe with welded cap and paint finish.

Pole height changes based on panel size.

6. Bottom of sign panel will be 7’ above finished grade, regardless of sign panel size.

7. Sign mounts to foundation through sandcast connectors per F-DOT 700 standard hardware and specifications indexes.

8. 4” Deep by 24” diameter mulch pile applied to base of sign pole.

9. WDI to review copy & layouts for submitted signs.

6.

4.

5.

7.

8.

Graphic Design Lead:

Project Area:

Creative Lead:

Show Writer:

Operations / Requestor:

ODS Graphic Firm:

04/01/2022

NOTICES

ISSUED FOR

REVISIONS

KEY PERSONS

DRAWING NO.:

WDW Roadway Signage Style Guide

Sheet Title:

ED&E Manager:

ORIGINAL DRAWING ON 11” X 17” SHEET

The data in this document incorporates proprietary rights of Imagineering.

Any party accepting this document does so in confidence and agrees that it shall not be duplicated, in whole or in part, nor disclosed to others, without the written consent of Imagineering.

Contractor shall verify all conditions on the job site and notify the project engineer of any variations from the dimensions shown on these drawings before proceeding with any construction. CDV05

Production Responsibility PROJECT / EDMS CODE NO.:

REVISION #:Phase:

STYLE GUIDE DRAWING ONLY, NOT FOR CONSTRUCTION

1365 Avenue of the Stars, Lake Buena Vista, FL 32830

(407) 560-6500

C-02

C-03

C-01

B-TYPE.00

Front View - Typical Scale: 1/2"=1'-0"

B-TYPE.00

Side View - Typical Scale: 1/2"=1'-0"

B-TYPE.00

Back View - Typical Scale: 1/2"=1'-0" Warning Sign Type B

B-TYPE.00

4"

7' -0

Fr om F in is h G ra de

2' -0

4"

9"

4"

A s

Re qu ire d

1. 2. 3.

6.

4.

5.

7.

8.

GENERAL NOTES

1. 1/8" Aluminum panel with reflective vinyl graphics first surface. Sign panels are to be digitally printed using 3M™ Diamond Grade™ DG³ Reflective Sheeting 4090DS using 3M materials component system.

2. Refer to MUTCD viewing distance index for proper panel size.

3. Refer to MUTCD signage index for proper panel artwork.

4. Sign panels mount to support tube through aluminum Z-Bar with flathead countersunk bolts and U-bolt fasteners. Flathead bolts patched with reflective vinyl on sign face.

5. 4" Round pipe with welded cap and paint finish.

Pole height changes based on panel size.

6. Bottom of sign panel will be 7’ above finished grade, regardless of sign panel size.

7. Sign mounts to foundation through sandcast connectors per F-DOT 700 standard hardware and specifications indexes.

8. 4” Deep by 24” diameter mulch pile applied to base of sign pole.

9. WDI to review copy & layouts for submitted signs.

A s

Re qu ire d

COLOR SCHEDULE

MP03597 - Indigo Semi-Gloss

C-01

MP12106 - Fordson Blue Semi-Gloss

C-02

MP08091 - Yellow Blast Semi-Gloss

C-03

Graphic Design Lead:

Project Area:

Creative Lead:

Show Writer:

Operations / Requestor:

ODS Graphic Firm:

04/01/2022

NOTICES

ISSUED FOR

REVISIONS

KEY PERSONS

DRAWING NO.:

WDW Roadway Signage Style Guide

Sheet Title:

ED&E Manager:

ORIGINAL DRAWING ON 11” X 17” SHEET

The data in this document incorporates proprietary rights of Imagineering.

Any party accepting this document does so in confidence and agrees that it shall not be duplicated, in whole or in part, nor disclosed to others, without the written consent of Imagineering.

Contractor shall verify all conditions on the job site and notify the project engineer of any variations from the dimensions shown on these drawings before proceeding with any construction. CDV05

Production Responsibility PROJECT / EDMS CODE NO.:

REVISION #:Phase:

STYLE GUIDE DRAWING ONLY, NOT FOR CONSTRUCTION

1365 Avenue of the Stars, Lake Buena Vista, FL 32830

(407) 560-6500

C-02

C-03

C-01

C-TYPE.00

Front View - Triple Destination Scale: 1/2"=1'-0"

C-TYPE.00

Side View - Typical Scale: 1/2"=1'-0"

C-TYPE.00

Back View - Typical Scale: 1/2"=1'-0" Guide Sign Type C

C-TYPE.00

GENERAL NOTES

1. 1/8" aluminum panel with reflective vinyl graphics applied first surface.

2. 1/8" Aluminum panel with reflective vinyl graphics first surface. Sign panels are to be digitally printed using 3M™ Diamond Grade™ DG³ Reflective Sheeting 4090DS using 3M materials component system. Refer to MUTCD viewing distance index for proper panel size.

Refer to MUTCD signage index for proper panel artwork.

3. Sign panels mount to support tube through aluminum Z-Bar with flathead countersunk bolts and U-bolt fasteners. Flathead bolts patched with reflective vinyl on sign face.

4. 4" Round pipe with welded cap and paint finish.

Pole height changes based on panel size.

5. Bottom of sign panel will be 7’ above finished grade, regardless of sign panel size.

6. Sign mounts to foundation through sandcast connectors per F-DOT 700 standard hardware and specifications indexes.

7. 4” Deep by 24” diameter mulch pile applied to base of sign pole.

8. WDI to review copy & layouts for submitted signs.

1.

2.

3.

4.

5.

6.

7.

To Match Navy Blue | C:100, M:90, Y:50, K:0 3M Diamond Grade Reflective Sheeting 4090DSM-01

MATERIAL SCHEDULE

M-01

COLOR SCHEDULE

MP03597 - Indigo Semi-Gloss

C-01

MP12106 - Fordson Blue Semi-Gloss

C-02

MP08091 - Yellow Blast Semi-Gloss

C-03

4"

7' -0

Fr om F in is h G ra de

1'- 9"

4" 2'

-6

~5'-9"

2' -0

4"

4"

R 1'-3"

1 3/4" 1 3/4"

'-7

Graphic Design Lead:

Project Area:

Creative Lead:

Show Writer:

Operations / Requestor:

ODS Graphic Firm:

04/01/2022

NOTICES

ISSUED FOR

REVISIONS

KEY PERSONS

DRAWING NO.:

WDW Roadway Signage Style Guide

Sheet Title:

ED&E Manager:

ORIGINAL DRAWING ON 11” X 17” SHEET

The data in this document incorporates proprietary rights of Imagineering.

Any party accepting this document does so in confidence and agrees that it shall not be duplicated, in whole or in part, nor disclosed to others, without the written consent of Imagineering.

Contractor shall verify all conditions on the job site and notify the project engineer of any variations from the dimensions shown on these drawings before proceeding with any construction. CDV05

Production Responsibility PROJECT / EDMS CODE NO.:

REVISION #:Phase:

STYLE GUIDE DRAWING ONLY, NOT FOR CONSTRUCTION

1365 Avenue of the Stars, Lake Buena Vista, FL 32830

(407) 560-6500

2' -0

4"

C-TYPE.01

Front View - Double Destination Scale: 1/2"=1'-0"

C-TYPE.01

Front View - Single Destination Scale: 1/2"=1'-0"

C-TYPE.01

Detail - Arrow Layouts Scale: 1/2"=1'-0"

C-TYPE.01

Detail - Arrow Size / Alignment Scale: 1"=1'-0" Guide Sign Type C

C-TYPE.01

Align arrow in circle;

centered both directions.

Straight Ahead

To the Left

To the Right

C-TYPE.01

1'-

/4

1'-6 7/8"

7' -0

Fr om F in is h G ra de

1'- 9"

4" 2'

-6

7' -0

Fr om F in is h G ra de

4"

1 3/4" 1 3/4"

4'-8"

2' -0

2'

-6

'-1

0"

'-7

Graphic Design Lead:

Project Area:

Creative Lead:

Show Writer:

Operations / Requestor:

ODS Graphic Firm:

04/01/2022

NOTICES

ISSUED FOR

REVISIONS

KEY PERSONS

DRAWING NO.:

WDW Roadway Signage Style Guide

Sheet Title:

ED&E Manager:

ORIGINAL DRAWING ON 11” X 17” SHEET

The data in this document incorporates proprietary rights of Imagineering.

Any party accepting this document does so in confidence and agrees that it shall not be duplicated, in whole or in part, nor disclosed to others, without the written consent of Imagineering.

Contractor shall verify all conditions on the job site and notify the project engineer of any variations from the dimensions shown on these drawings before proceeding with any construction. CDV05

Production Responsibility PROJECT / EDMS CODE NO.:

REVISION #:Phase:

STYLE GUIDE DRAWING ONLY, NOT FOR CONSTRUCTION

1365 Avenue of the Stars, Lake Buena Vista, FL 32830

(407) 560-6500

C-02

C-03

C-01

C-TYPE.02

Front View - Six Destinations Scale: 1/2"=1'-0"

C-TYPE.02

Side View - Typical Scale: 1/2"=1'-0"

C-TYPE.02

Back View - Typical Scale: 1/2"=1'-0" Guide Sign Type C

C-TYPE.02

'-8

M-01

4"

7' -0

Fr om F in is h G ra de

2' -0

4"

1'- 9"

4" 1'-

9" 4"

2' -6

5'-9"

4"

R 1'-3"

1 3/4" 1 3/4"

Graphic Design Lead:

Project Area:

Creative Lead:

Show Writer:

Operations / Requestor:

ODS Graphic Firm:

04/01/2022

NOTICES

ISSUED FOR

REVISIONS

KEY PERSONS

DRAWING NO.:

WDW Roadway Signage Style Guide

Sheet Title:

ED&E Manager:

ORIGINAL DRAWING ON 11” X 17” SHEET

The data in this document incorporates proprietary rights of Imagineering.

Any party accepting this document does so in confidence and agrees that it shall not be duplicated, in whole or in part, nor disclosed to others, without the written consent of Imagineering.

Contractor shall verify all conditions on the job site and notify the project engineer of any variations from the dimensions shown on these drawings before proceeding with any construction. CDV05

Production Responsibility PROJECT / EDMS CODE NO.:

REVISION #:Phase:

STYLE GUIDE DRAWING ONLY, NOT FOR CONSTRUCTION

1365 Avenue of the Stars, Lake Buena Vista, FL 32830

(407) 560-6500

EPCOT Center Drive

Disney Vacation Club Way

D-TYPE.00

Front View - Typical Scale: 1/2"=1'-0"

D-TYPE.00

Side View - Typical Scale: 1/2"=1'-0" Street Names Sign

Type D

D-TYPE.00

GENERAL NOTES

1. 1/8" Aluminum panels with reflective vinyl graphics first surface. Sign panels are to be digitally printed using 3M™ Diamond Grade™ DG³ Reflective Sheeting 4090DS using 3M materials component system.

2. Sign panels mount to support tube through 12” heavy duty aluminum pipe post brackets with set screw fasteners. Raw aluminum finish.

3. Top sign panels mount to lower sign panels through 12” aluminum fixed cross piece brackets with set screw fasteners. Raw aluminum finish.

4. 2 3/8" Round pipe with paint finish.

5. 4" Round PVC Tube with caps and paint finish.

6. Bottom of first sign panel will be 7’ above finished grade.

7. Direct burial sign post foundation as required.

8. 4” Deep by 24” diameter mulch pile applied to base of sign pole.

9. WDI to review copy & layouts for submitted signs.

R 2 1/2"

C-02

C-03

C-01

C-01

1.

6.

2.

1.

3.

4.

5.

7.

8.

Street Copy: Expressway ExtraBold Secondary Copy: Expressway Bold

TYPEFACE SCHEDULE

To Match Navy Blue | C:100, M:90, Y:50, K:0 3M Diamond Grade Reflective Sheeting 4090DSM-01

To Match White | C:0, M:0, Y:0, K:0 3M Diamond Grade Reflective Sheeting 4090DSM-04

MATERIAL SCHEDULE

COLOR SCHEDULE

MP03597 - Indigo Semi-Gloss

C-01

MP12106 - Fordson Blue Semi-Gloss

C-02

MP08091 - Yellow Blast Semi-Gloss

C-03

7' -0

1'

-0

1' -1

/8

3"

4'-4" 4'-4"

2" 4'

-3

/8

4" 2'

-0

M-01

M-04

1/

4"

9' -1

/8

Graphic Design Lead:

Project Area:

Creative Lead:

Show Writer:

Operations / Requestor:

ODS Graphic Firm:

04/01/2022

NOTICES

ISSUED FOR

REVISIONS

KEY PERSONS

DRAWING NO.:

WDW Roadway Signage Style Guide

Sheet Title:

ED&E Manager:

ORIGINAL DRAWING ON 11” X 17” SHEET

The data in this document incorporates proprietary rights of Imagineering.

Any party accepting this document does so in confidence and agrees that it shall not be duplicated, in whole or in part, nor disclosed to others, without the written consent of Imagineering.

Contractor shall verify all conditions on the job site and notify the project engineer of any variations from the dimensions shown on these drawings before proceeding with any construction. CDV05

Production Responsibility PROJECT / EDMS CODE NO.:

REVISION #:Phase:

STYLE GUIDE DRAWING ONLY, NOT FOR CONSTRUCTION

1365 Avenue of the Stars, Lake Buena Vista, FL 32830

(407) 560-6500

D-15

D-16

D-10

D-09

D-12

D-13

D-14

D-11D-03

D-01

D-02

D-04

D-05

D-06

D-07

D-08

D-17

D-18

D-22

D-23

D-24

D-19

D-20

D-21 D-29

D-30

D-32

D-25

D-26

D-27

D-28

D-31 D-39

D-35

D-33

D-34

D-36

D-38

D-37

D-TYPE.01

Typical Sign Panel Layout Scale: 1 1/2"=1'-0"

Street Names Sign Type D

D-TYPE.01

Street Copy: Expressway ExtraBold Secondary Copy: Expressway Bold

TYPEFACE SCHEDULE

GENERAL NOTES

1. Adjustments may be made to text size and spacing if critical. All changes must be notated and submitted to WDI for approval.

2. WDI to review copy & layouts for submitted signs.

1' -0

2" margin on bottom of sign.

2" margin on top of sign.

STREET COPY

• 3" Standard letter height

• Mixed Case / Normal Tracking

• Centered on sign panel

SECONDARY COPY

• 2 1/4" Standard letter height

• Mixed Case / Normal Tracking

• Centered on sign panel

7/8" standard margin between copy.

2 1/2" radius corners on all Type D Signs.

4'-4"

D-TYPE.01

Message Schedule Scale: 1/2"=1'-0"

Graphic Design Lead:

Project Area:

Creative Lead:

Show Writer:

Operations / Requestor:

ODS Graphic Firm:

04/01/2022

NOTICES

ISSUED FOR

REVISIONS

KEY PERSONS

DRAWING NO.:

WDW Roadway Signage Style Guide

Sheet Title:

ED&E Manager:

ORIGINAL DRAWING ON 11” X 17” SHEET

The data in this document incorporates proprietary rights of Imagineering.

Any party accepting this document does so in confidence and agrees that it shall not be duplicated, in whole or in part, nor disclosed to others, without the written consent of Imagineering.

Contractor shall verify all conditions on the job site and notify the project engineer of any variations from the dimensions shown on these drawings before proceeding with any construction. CDV05

Production Responsibility PROJECT / EDMS CODE NO.:

REVISION #:Phase:

STYLE GUIDE DRAWING ONLY, NOT FOR CONSTRUCTION

1365 Avenue of the Stars, Lake Buena Vista, FL 32830

(407) 560-6500

DIRECTION

Destination One Destination Two & Second Line

C-01 +Returns & Back.

C-02

C-03

C-01

C-01 Visible U-Bolts.

E-TYPE-1.00

Front View - Typical Scale: 1/2"=1'-0"

E-TYPE-1.00

Side View - Typical Scale: 1/2"=1'-0"

E-TYPE-1.00

Back View - Typical Scale: 1/2"=1'-0"

GENERAL NOTES

M-01

M-01

M-02

M-04

M-04

M-03

Destination Copy: Expressway Bold Directional Copy: Expressway ExtraBold

TYPEFACE SCHEDULE

To Match Navy Blue | C:100, M:90, Y:50, K:0 3M Diamond Grade Reflective Sheeting 4090DSM-01

To Match Blue | C:100, M:50, Y:25, K:0 3M Diamond Grade Reflective Sheeting 4090DSM-02

To Match Yellow | C:0, M:25, Y:100, K:0 3M Diamond Grade Reflective Sheeting 4090DSM-03

To Match White | C:0, M:0, Y:0, K:0 3M Diamond Grade Reflective Sheeting 4090DSM-04

MATERIAL SCHEDULE

3.

4.

6.

2.

1.

5.

1. 1/8" aluminum panel with reflective vinyl graphics applied first surface.

2. 1/8" Aluminum panel with reflective vinyl graphics applied first surface.

3. Sign panels mount to support tube through aluminum Z-Bar with flathead countersunk bolts and U-bolt fasteners. Flathead bolts patched with reflective vinyl on sign face.

4. 5" Round pipe with welded cap and paint finish.

5. 8" Round PVC Tube with caps and paint finish.

6. Sign mounts to foundation through bolt plate and connectors per F-DOT 700 standard hardware and specifications indexes.

7. Vendor to supply complete shop drawings for review prior to production.

8. WDI to review copy & layouts for submitted signs.

8"

Directional Sign Type : E1

E-TYPE-1.00

COLOR SCHEDULE

MP03597 - Indigo Semi-Gloss

C-01

MP12106 - Fordson Blue Semi-Gloss

C-02

MP08091 - Yellow Blast Semi-Gloss

C-03

6'-0"

'-2

2' -0

4'

-1 0"

4" 4'

-0

6" 6"

4' -2

7'

-0

5'-0"

2' -5

3"

1'- 4"

Graphic Design Lead:

Project Area:

Creative Lead:

Show Writer:

Operations / Requestor:

ODS Graphic Firm:

04/01/2022

NOTICES

ISSUED FOR

REVISIONS

KEY PERSONS

DRAWING NO.:

WDW Roadway Signage Style Guide

Sheet Title:

ED&E Manager:

ORIGINAL DRAWING ON 11” X 17” SHEET

The data in this document incorporates proprietary rights of Imagineering.

Any party accepting this document does so in confidence and agrees that it shall not be duplicated, in whole or in part, nor disclosed to others, without the written consent of Imagineering.

Contractor shall verify all conditions on the job site and notify the project engineer of any variations from the dimensions shown on these drawings before proceeding with any construction. CDV05

Production Responsibility PROJECT / EDMS CODE NO.:

REVISION #:Phase:

STYLE GUIDE DRAWING ONLY, NOT FOR CONSTRUCTION

1365 Avenue of the Stars, Lake Buena Vista, FL 32830

(407) 560-6500

DIRECTION

Destination One Destination Two & Second Line

E-TYPE-1.01

Typical Sign Panel Layout Scale: 1 1/2"=1'-0"

6" standard margin on top of sign.

5" standard margin on left side of sign. 3" minimum margin on right side of sign.

DIRECTIONAL COPY

•5" standard letter height •Centered in Direction Box

•ALL CAPS

•Tracking / Kerning set to 100

DESTINATION COPY

•4 1/2" Standard letter height •Mixed Case / Normal Tracking

6" standard margin between destinations.

3 1/2" standard margin for multiple lines of same destination.

Direction box

4" radius corners on all Type E Signs.

3" minimum margin on bottom of sign.

3" minimum margin on right side of sign.

GENERAL NOTES

Destination Copy: Expressway Bold Directional Copy: Expressway ExtraBold

TYPEFACE SCHEDULE

1. Adjustments may be made to text size and spacing if critical. All changes must be notated and submitted to WDI for approval.

2. Type E signs may contain three (3) destinations maximum unless additionally approved.

3. WDI to review copy & layouts for submitted signs.

Directional Sign Type : E1

E-TYPE-1.01

6'-0"

1'- 2"

3' -8

Graphic Design Lead:

Project Area:

Creative Lead:

Show Writer:

Operations / Requestor:

ODS Graphic Firm:

04/01/2022

NOTICES

ISSUED FOR

REVISIONS

KEY PERSONS

DRAWING NO.:

WDW Roadway Signage Style Guide

Sheet Title:

ED&E Manager:

ORIGINAL DRAWING ON 11” X 17” SHEET

The data in this document incorporates proprietary rights of Imagineering.

Any party accepting this document does so in confidence and agrees that it shall not be duplicated, in whole or in part, nor disclosed to others, without the written consent of Imagineering.

Contractor shall verify all conditions on the job site and notify the project engineer of any variations from the dimensions shown on these drawings before proceeding with any construction. CDV05

Production Responsibility PROJECT / EDMS CODE NO.:

REVISION #:Phase:

STYLE GUIDE DRAWING ONLY, NOT FOR CONSTRUCTION

1365 Avenue of the Stars, Lake Buena Vista, FL 32830

(407) 560-6500

STRAIGHT AHEAD

Exit To

E-TYPE-1.02

Typical Sign Panel Layout - With Roadway Icons Scale: 1 1/2"=1'-0"

6" standard margin on top of sign.

5" standard margin on left side of sign. 3" minimum margin on right side of sign.

DIRECTIONAL COPY

•5" standard letter height •Centered in Direction Box

•ALL CAPS

•Tracking / Kerning set to 100

DESTINATION COPY

• 5" Standard letter height

• Mixed Case / Normal Tracking

4" standard margin for multiple lines of same destination.

Direction box

3" minimum margin on bottom of sign.

GENERAL NOTES

Destination Copy: Expressway Bold Directional Copy: Expressway ExtraBold

TYPEFACE SCHEDULE

1. Adjustments may be made to text size and spacing if critical. All changes must be notated and submitted to WDI for approval.

2. Type E signs may contain three (3) destinations maximum unless additionally approved.

3. WDI to review copy & layouts for submitted signs.

Directional Sign Type : E1

E-TYPE-1.02

Full-Color Standard Roadway Icons as required. Refer to MUTCD signage index for proper panel artwork.

4" radius corners on all Type E Signs.

3 3/4" 3 3/4"

6'-0"

1'- 2"

3' -8

"1'- 0"

Graphic Design Lead:

Project Area:

Creative Lead:

Show Writer:

Operations / Requestor:

ODS Graphic Firm:

04/01/2022

NOTICES

ISSUED FOR

REVISIONS

KEY PERSONS

DRAWING NO.:

WDW Roadway Signage Style Guide

Sheet Title:

ED&E Manager:

ORIGINAL DRAWING ON 11” X 17” SHEET

The data in this document incorporates proprietary rights of Imagineering.

Any party accepting this document does so in confidence and agrees that it shall not be duplicated, in whole or in part, nor disclosed to others, without the written consent of Imagineering.

Contractor shall verify all conditions on the job site and notify the project engineer of any variations from the dimensions shown on these drawings before proceeding with any construction. CDV05

Production Responsibility PROJECT / EDMS CODE NO.:

REVISION #:Phase:

STYLE GUIDE DRAWING ONLY, NOT FOR CONSTRUCTION

1365 Avenue of the Stars, Lake Buena Vista, FL 32830

(407) 560-6500

E-TYPE-1.03

Direction of Travel - Left Median Arrow Layout Scale: 1/2"=1'-0"

E-TYPE-1.03

Direction of Travel - Right Median Arrow Layout Scale: 1/2"=1'-0"

E-TYPE-1.03

Front View - Arrow Placement / Alignment Scale: 1"=1'-0"

Ears are a perfect circle.

Align arrow centered, both directions in circle.

CL

CL

1'- 2"

Directional Sign Type : E1

E-TYPE-1.03

1'-

1'-10"1'-4 3/4"

R 3/8"

Graphic Design Lead:

Project Area:

Creative Lead:

Show Writer:

Operations / Requestor:

ODS Graphic Firm:

04/01/2022

NOTICES

ISSUED FOR

REVISIONS

KEY PERSONS

DRAWING NO.:

WDW Roadway Signage Style Guide

Sheet Title:

ED&E Manager:

ORIGINAL DRAWING ON 11” X 17” SHEET

The data in this document incorporates proprietary rights of Imagineering.

Any party accepting this document does so in confidence and agrees that it shall not be duplicated, in whole or in part, nor disclosed to others, without the written consent of Imagineering.

Contractor shall verify all conditions on the job site and notify the project engineer of any variations from the dimensions shown on these drawings before proceeding with any construction. CDV05

Production Responsibility PROJECT / EDMS CODE NO.:

REVISION #:Phase:

STYLE GUIDE DRAWING ONLY, NOT FOR CONSTRUCTION

1365 Avenue of the Stars, Lake Buena Vista, FL 32830

(407) 560-6500

Destination One

Destination Two & Second Line

C-01 +Returns & Back.

C-02

C-03

C-01

C-01 Visible U-Bolts.

E-TYPE-2.00

Front View - Typical Scale: 1/2"=1'-0"

E-TYPE-2.00

Side View - Typical Scale: 1/2"=1'-0"

E-TYPE-2.00

Back View - Typical Scale: 1/2"=1'-0"

GENERAL NOTES

M-01

M-01

M-02

M-04

Destination Copy: Expressway Bold Directional Copy: Expressway ExtraBold

TYPEFACE SCHEDULE

To Match Navy Blue | C:100, M:90, Y:50, K:0 3M Diamond Grade Reflective Sheeting 4090DSM-01

To Match Blue | C:100, M:50, Y:25, K:0 3M Diamond Grade Reflective Sheeting 4090DSM-02

To Match Yellow | C:0, M:25, Y:100, K:0 3M Diamond Grade Reflective Sheeting 4090DSM-03

To Match White | C:0, M:0, Y:0, K:0 3M Diamond Grade Reflective Sheeting 4090DSM-04

MATERIAL SCHEDULE

3.

4.

6.

2.

1.

5.

1. 1/8" aluminum panel with reflective vinyl graphics applied first surface.

2. 1/8" Aluminum panel with reflective vinyl graphics applied first surface.

3. Sign panels mount to support tube through aluminum Z-Bar with flathead countersunk bolts and U-bolt fasteners. Flathead bolts patched with reflective vinyl on sign face.

4. 5" Round pipe with welded cap and paint finish.

5. 8" Round PVC Tube with caps and paint finish.

6. Sign mounts to foundation through bolt plate and connectors per F-DOT 700 standard hardware and specifications indexes.

7. Vendor to supply complete shop drawings for review prior to production.

8. WDI to review copy & layouts for submitted signs.

Directional Sign Type : E2

E-TYPE-2.00

COLOR SCHEDULE

MP03597 - Indigo Semi-Gloss

C-01

MP12106 - Fordson Blue Semi-Gloss

C-02

MP08091 - Yellow Blast Semi-Gloss

C-03

2' -5

3"

1'- 4"

6'-0"

'-2

2' -0

4'

-1 0"

4" 4'

-0

6" 6"

4' -2

7'

-0

5'-0"

8"

Graphic Design Lead:

Project Area:

Creative Lead:

Show Writer:

Operations / Requestor:

ODS Graphic Firm:

04/01/2022

NOTICES

ISSUED FOR

REVISIONS

KEY PERSONS

DRAWING NO.:

WDW Roadway Signage Style Guide

Sheet Title:

ED&E Manager:

ORIGINAL DRAWING ON 11” X 17” SHEET

The data in this document incorporates proprietary rights of Imagineering.

Any party accepting this document does so in confidence and agrees that it shall not be duplicated, in whole or in part, nor disclosed to others, without the written consent of Imagineering.

Contractor shall verify all conditions on the job site and notify the project engineer of any variations from the dimensions shown on these drawings before proceeding with any construction. CDV05

Production Responsibility PROJECT / EDMS CODE NO.:

REVISION #:Phase:

STYLE GUIDE DRAWING ONLY, NOT FOR CONSTRUCTION

1365 Avenue of the Stars, Lake Buena Vista, FL 32830

(407) 560-6500

Destination One

Destination Two & Second Line

E-TYPE-2.01

Typical Sign Panel Layout Scale: 1 1/2"=1'-0"

6" standard margin (to top of cap height) on top of sign.

2" standard margin on left side of sign. 2" minimum margin on right side of sign.

DESTINATION COPY

•4 1/2" Standard letter height •Mixed Case / Normal Tracking

8" standard margin between destinations.

3 1/2" standard margin for multiple lines of same destination.

Direction box and arrows detailed on sheet E-TYPE-2.02

4" radius corners on all Type E Signs.

6" minimum margin on bottom of sign.

GENERAL NOTES

Destination Copy: Expressway Bold

TYPEFACE SCHEDULE

1. Adjustments may be made to text size and spacing if critical. All changes must be notated and submitted to WDI for approval.

2. Type E-2 signs may contain three (3) destinations maximum.

3. WDI to review copy & layouts for submitted signs.

Directional Sign Type : E2

E-TYPE-2.01

E-TYPE-2.02

6'-0"

4' -1

0"

Graphic Design Lead:

Project Area:

Creative Lead:

Show Writer:

Operations / Requestor:

ODS Graphic Firm:

04/01/2022

NOTICES

ISSUED FOR

REVISIONS

KEY PERSONS

DRAWING NO.:

WDW Roadway Signage Style Guide

Sheet Title:

ED&E Manager:

ORIGINAL DRAWING ON 11” X 17” SHEET

The data in this document incorporates proprietary rights of Imagineering.

Any party accepting this document does so in confidence and agrees that it shall not be duplicated, in whole or in part, nor disclosed to others, without the written consent of Imagineering.

Contractor shall verify all conditions on the job site and notify the project engineer of any variations from the dimensions shown on these drawings before proceeding with any construction. CDV05

Production Responsibility PROJECT / EDMS CODE NO.:

REVISION #:Phase:

STYLE GUIDE DRAWING ONLY, NOT FOR CONSTRUCTION

1365 Avenue of the Stars, Lake Buena Vista, FL 32830

(407) 560-6500

Destination One

Destination Two & Second Line

E-TYPE-2.02

DESTINATION ARROWS

•Centered Horizontally in direction box.

•Centered Vertically with first letter of destination.

Direction box.

GENERAL NOTES

Destination Copy: Expressway Bold

TYPEFACE SCHEDULE

1. Adjustments may be made to text size and spacing if critical. All changes must be notated and submitted to WDI for approval.

2. Type E-2 signs may contain three (3) destinations maximum.

3. WDI to review copy & layouts for submitted signs.

Directional Sign Type : E2

E-TYPE-2.02

E-TYPE-2.02

Front View - Arrow Typical Scale: 1 1/2"=1'-0"

E-TYPE-2.02

Typical Sign Panel Layout Scale: 1 1/2"=1'-0"

6'-0"

1'-0"

4' -1

0"

CL

CL

CL

8"

6 5/8"

Graphic Design Lead:

Project Area:

Creative Lead:

Show Writer:

Operations / Requestor:

ODS Graphic Firm:

04/01/2022

NOTICES

ISSUED FOR

REVISIONS

KEY PERSONS

DRAWING NO.:

WDW Roadway Signage Style Guide

Sheet Title:

ED&E Manager:

ORIGINAL DRAWING ON 11” X 17” SHEET

The data in this document incorporates proprietary rights of Imagineering.

Any party accepting this document does so in confidence and agrees that it shall not be duplicated, in whole or in part, nor disclosed to others, without the written consent of Imagineering.

Contractor shall verify all conditions on the job site and notify the project engineer of any variations from the dimensions shown on these drawings before proceeding with any construction. CDV05

Production Responsibility PROJECT / EDMS CODE NO.:

REVISION #:Phase:

STYLE GUIDE DRAWING ONLY, NOT FOR CONSTRUCTION

1365 Avenue of the Stars, Lake Buena Vista, FL 32830

(407) 560-6500

F-TYPE-1.00

Front View - Retired Sign Type F1 Not to Scale

F-TYPE-1.00

Front View - Retired Sign Type F2 Not to Scale

Directional Sign Type : F1 & F2

F-TYPE-1.00

RETIRED SIGN

TYPE - DO NOT USE

RETIRED SIGN

TYPE - DO NOT USE

Graphic Design Lead:

Project Area:

Creative Lead:

Show Writer:

Operations / Requestor:

ODS Graphic Firm:

04/01/2022

NOTICES

ISSUED FOR

REVISIONS

KEY PERSONS

DRAWING NO.:

WDW Roadway Signage Style Guide

Sheet Title:

ED&E Manager:

ORIGINAL DRAWING ON 11” X 17” SHEET

The data in this document incorporates proprietary rights of Imagineering.

Any party accepting this document does so in confidence and agrees that it shall not be duplicated, in whole or in part, nor disclosed to others, without the written consent of Imagineering.

Contractor shall verify all conditions on the job site and notify the project engineer of any variations from the dimensions shown on these drawings before proceeding with any construction. CDV05

Production Responsibility PROJECT / EDMS CODE NO.:

REVISION #:Phase:

STYLE GUIDE DRAWING ONLY, NOT FOR CONSTRUCTION

1365 Avenue of the Stars, Lake Buena Vista, FL 32830

(407) 560-6500

DIRECTION

Destination One & 2nd Line

G-TYPE-1.00

Front View - Typical Scale: 1/4"=1'-0"

GENERAL NOTES

Destination Copy: Expressway Bold Directional Copy: Expressway ExtraBold

TYPEFACE SCHEDULE

To Match Navy Blue | C:100, M:90, Y:50, K:0 3M Diamond Grade Reflective Sheeting 4090DSM-01

To Match Blue | C:100, M:50, Y:25, K:0 3M Diamond Grade Reflective Sheeting 4090DSM-02

To Match Yellow | C:0, M:25, Y:100, K:0 3M Diamond Grade Reflective Sheeting 4090DSM-03

To Match White | C:0, M:0, Y:0, K:0 3M Diamond Grade Reflective Sheeting 4090DSM-04

MATERIAL SCHEDULE

1. 1/8" Aluminum panel with reflective vinyl graphics first surface.

2. Sign panels mount to support tube through aluminum Z-Bar with flathead countersunk bolts and U-bolt fasteners. Flathead bolts patched with reflective vinyl on sign face.

3. Vendor to supply complete shop drawings for review prior to production.

4. WDI to review copy & layouts for submitted signs.

Overhead Sign Type G1

G-TYPE-1.00

M-01

M-02

M-04

M-03

1.

'-0

12'-0"

2' -6

R 10"

Graphic Design Lead:

Project Area:

Creative Lead:

Show Writer:

Operations / Requestor:

ODS Graphic Firm:

04/01/2022

NOTICES

ISSUED FOR

REVISIONS

KEY PERSONS

DRAWING NO.:

WDW Roadway Signage Style Guide

Sheet Title:

ED&E Manager:

ORIGINAL DRAWING ON 11” X 17” SHEET

The data in this document incorporates proprietary rights of Imagineering.

Any party accepting this document does so in confidence and agrees that it shall not be duplicated, in whole or in part, nor disclosed to others, without the written consent of Imagineering.

Contractor shall verify all conditions on the job site and notify the project engineer of any variations from the dimensions shown on these drawings before proceeding with any construction. CDV05

Production Responsibility PROJECT / EDMS CODE NO.:

REVISION #:Phase:

STYLE GUIDE DRAWING ONLY, NOT FOR CONSTRUCTION

1365 Avenue of the Stars, Lake Buena Vista, FL 32830

(407) 560-6500

Destination 1 & 2nd Line Destination 2

DIRECTION

G-TYPE-1.01

Typical Sign Panel Layout Scale: 3/8"=1'-0"

Overhead Sign Type G1

G-TYPE-1.01

Destination Copy: Expressway Bold Directional Copy: Expressway ExtraBold

TYPEFACE SCHEDULE

GENERAL NOTES

1. Adjustments may be made to text size and spacing if critical. All changes must be notated and submitted to WDI for approval.

2. Type G1 signs may contain two (2) destinations maximum unless additionally approved.

3. Refer to MUTCD signage index for proper panel artwork.

4. WDI to review copy & layouts for submitted signs.

1’-0" Standard margin on left side of sign.

1’-4" Standard margin on top of sign.

DIRECTIONAL COPY

• 1'-0" Standard letter height

• Centered in Direction Box

• ALL CAPS

• Tracking / Kerning set to 100

DESTINATION COPY

• 1’-0" Standard letter height

• Mixed Case / Normal Tracking

1'-4" Standard margin between destinations.

Direction box

10" Minimum margin on bottom of sign.

1’-0" Minimum margin on right side of sign.

'-0

2' -6

10" Radius corners on all Type G Signs.

12'-0"

8" Standard margin for multiple lines of same destination.

Graphic Design Lead:

Project Area:

Creative Lead:

Show Writer:

Operations / Requestor:

ODS Graphic Firm:

04/01/2022

NOTICES

ISSUED FOR

REVISIONS

KEY PERSONS

DRAWING NO.:

WDW Roadway Signage Style Guide

Sheet Title:

ED&E Manager:

ORIGINAL DRAWING ON 11” X 17” SHEET

The data in this document incorporates proprietary rights of Imagineering.

Any party accepting this document does so in confidence and agrees that it shall not be duplicated, in whole or in part, nor disclosed to others, without the written consent of Imagineering.

Contractor shall verify all conditions on the job site and notify the project engineer of any variations from the dimensions shown on these drawings before proceeding with any construction. CDV05

Production Responsibility PROJECT / EDMS CODE NO.:

REVISION #:Phase:

STYLE GUIDE DRAWING ONLY, NOT FOR CONSTRUCTION

1365 Avenue of the Stars, Lake Buena Vista, FL 32830

(407) 560-6500

Destination One & Second Line Destination Two Destination Three

DIRECTION

Destination One & Second Line Destination Two Destination Three

DIRECTION

G-TYPE-2.00

Front View - Type G2-1 Scale: 1/4"=1'-0"

G-TYPE-2.00

Front View - Type G2-2 Scale: 1/4"=1'-0"

Overhead Sign Type G2

G-TYPE-2.00

M-01

M-01

M-02

M-04

M-04

M-03

1.

'-0

'-0

2' -6

'-1

R 10"

Ø 3'-0"

16'-0"

GENERAL NOTES

Destination Copy: Expressway Bold Directional Copy: Expressway ExtraBold

TYPEFACE SCHEDULE

To Match Navy Blue | C:100, M:90, Y:50, K:0 3M Diamond Grade Reflective Sheeting 4090DSM-01

To Match Blue | C:100, M:50, Y:25, K:0 3M Diamond Grade Reflective Sheeting 4090DSM-02

To Match Yellow | C:0, M:25, Y:100, K:0 3M Diamond Grade Reflective…