Exhibit_3_Sample_-_Energy_Practice_Installation_Plan.pdf

PDF 39 KB Posted

Attached to
Development of energy practice, installation oversight and checkout/certification of the practice standards to support up to 22 Environmental Quality Incentives Programs contracts
Solicitation number
AG-2B46-S-16-0025
Issued by

About this file

From the source

Exhibit 3 Sample - Energy Practice Installation Plan

View the file

Other files

File Type Posted
Exhibit_4_Practices_by_EQIP_patricipant_contract_bid_items-8-2-2016.pdf PDF
AG-2B46-S-16-0025_Amendment_No._2.pdf PDF
Exhibit_5_TSP_Certification_Energy_Contract_Rev_7_27_2016.pdf PDF
AG-2B46-S-16-0025_Amendment_No._1.pdf PDF
Exhibit_4_Practices_by_EQIP_patricipant_contract_bid_items.pdf PDF
Exhibit_2a_Farmstead_Energy_Improvement_(374)_SOW.pdf PDF
Attachment_2_-_Vendor_Information_Sheet.pdf PDF
Combined_Synopsis_and_Solicitation.pdf PDF
Exhibit_2b_Building_Envelope_Improvement_(670)_SOW.pdf PDF
Exhibit_5_Technical_Service_Provider_Certification.pdf PDF
Attachment_3_-_SCA_Wage_Determination.pdf PDF
Exhibit_6_NRCS_CPA_6_Notes.pdf PDF
Exhibit_2c_Lighting_System_Improvement_(672)_SOW.pdf PDF
Exhibit_7_Missouri_Map_with_Approximate_Locations_of_Work_Extents.pdf PDF
Attachment_1_-_Statement_of_Work.pdf PDF
Show all 15

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Exhibit 3 Sample - Energy Practice Installation Plan

Owner/Operator: Old McGregor

County: Curmudgeon

Contract Number: BR549

The installation of conservation practices standards that contribute to energy efficiency improvements are based on an agricultural energy management plan AgEMP, which is an energy audit specifically focused on agriculture operations. The AgEMP identified the following practices:

Farmstead Energy Improvement (code 374):

1. Radiant tube heaters.

a. Replace existing pancake heaters (non-radiant) with radiant tube heaters complete with mounting hardware, control system, and utility connections.

i. House 1 provide equivalent 920,000 BTU/hour capacity

ii. House 2 provide equivalent 920,000 BTU/hour capacity

iii. House 3 provide equivalent 920,000 BTU/hour capacity

iv. House 4 provide equivalent 1,140,000 BTU/hour capacity.

Lighting System Improvement (code 670)

1. LED light upgrade.

a. Replace 60w standard incandescent with 10w LED designed for poultry house installation, dust resistant, color temperature range 3,500-6,400 Kelvin, utilizing standard lamp base (E26 base).

i. House 1 install 40 10w LED

ii. House 2 install 40 10w LED

iii. House 3 install 40 10w LED

iv. House 4 install 13 10w LED

2. LED, Dimmable, light upgrade

a. Replace 60w dimmable incandescent with 10w dimmable LED designed for poultry house installation, dust resistant, color temperature range 3,500-6,400 Kelvin, utilizing standard lamp base (E26 base).

i. House 2 install 50 10w dimmable LED and 1 LED compatible dimmer control.

ii. House 3 install 50 10w dimmable LED and 1 LED compatible dimmer control.

iii. House 4 install 50 10w dimmable LED and 1 LED compatible dimmer control.

Building Envelope Improvement (code 672)

1. Crack Sealant

a. Sealing air leaks and cracks between the building and foundation and frames for doors with an expanding, insulating sealant.

i. House 1 seal approximately 2,680 linear feet.

ii. House 2 seal approximately 2,680 linear feet.

iii. House 3 seal approximately 2,680 linear feet.

2. Insulated Curtain

a. Install an insulated brood curtain complete with hangers in place of an uninsulated brood curtain. The insulated brood curtain will have a minimum insulating value of R-2.5.

i. House 1 install 1 insulated brood curtain approximately 440 sq. ft.

ii. House 2 install 1 insulated brood curtain approximately 440 sq. ft.

iii. House 3 install 1 insulated brood curtain approximately 440 sq. ft.

iv. House 4 install 1 insulated brood curtain approximately 460 sq. ft.

3. Insulation

a. Solid wall insulation addition to obtain minimum R-7. Add additional insulation or remove and replace insulation in order to obtain insulating value R-7 in the side walls and end walls.

i. House 1 approximately 1,520 sq. ft. below curtain section; 1,140 sq. ft.

above curtain section; 760 sq. ft. end walls. Total of 3,420 sq. ft.

insulation addition.

ii. House 2 approximately 1,520 sq. ft. below curtain section; 1,140 sq. ft.

above curtain section; 760 sq. ft. end walls. Total of 3,420 sq. ft.

insulation addition.

iii. House 3 approximately 1,520 sq. ft. below curtain section; 1,140 sq. ft.

above curtain section; 760 sq. ft. end walls. Total of 3,420 sq. ft.

insulation addition.

iv. House 4 approximately 820 sq. ft. below curtain section; 840 sq. ft. above curtain section; 700 sq. ft. end walls. Total of 2,360 sq. ft. insulation addition.

b. Foundation wall insulation of exposed concrete area. Addition of insulation to obtain R-7.

i. House 1 approximately 440 sq. ft. of exposed concrete foundation.

ii. House 2 approximately 440 sq. ft. of exposed concrete foundation.

iii. House 3 approximately 440 sq. ft. of exposed concrete foundation.

iv. House 4 approximately 550 sq. ft. of exposed concrete foundation.

Technical Service Provider (TSP) Certification

As a certified Technical Service Provider, I certify that I have developed and presented this energy practice installation plan to the owner/operator.

TSP Name (printed)

TSP Signature Date

Owner/operator Acceptance

As the owner/operator, I agree with and accept this energy practice installation plan as developed and presented by the technical service provider.

Owner/operator Name (printed)

Owner/operator Signature Date

File details come from the government source that posted it. Updated .