FSR FL-640P-8-B Specs and Drawing.pdf
PDF 5 MB Posted
- Attached to
- Acoustic Study
- Solicitation number
- Not on record
About this file
This document appears to be product specifications for the FSR FL-640P floor box, which is designed for raised access floors. The FL-640P provides a practical solution for cable storage while maintaining easy access, with various cover options and a "transformable" backbox that can be configured for numerous high and low voltage gang openings. The box comes in 4" to 10" depths and is UL listed. It includes all necessary internal plates and brackets to allow for quick changes to the compartment configurations.
The related federal contract opportunity is a solicitation from the Department of the Air Force Air Combat Command to conduct an acoustic study of the atrium and auditorium in building B1000 at Offutt AFB in Nebraska. The study will examine the impact of replacing the current carpet flooring with terrazzo, and provide mitigation proposals to reduce noise in the spaces. The government will provide the current drawings and a proposed audio upgrade design for the atrium.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Auditorium 2.jpg | JPG image | |
| Auditorium 1.jpg | JPG image | |
| Atrium 4.jpg | JPG image | |
| atrium 1.jpg | JPG image | |
| AMD - A240406-8X12-FL-LED REV A- NPN STRATCOM.pdf | ||
| Auditorium Drawings.pdf | ||
| Atrium Speaker Locations.pdf | ||
| Atrium 3.jpg | JPG image | |
| Atrium COB NPN6600 Updated Set 11 2024.pdf | ||
| Atrium 2.jpg | JPG image | |
| Questions and Answers Acoustic Study Final J431 WWR.docx | DOCX document | |
| Questions and Answers Acoustic Study Final J431 WWR.pdf | ||
| Solicitation FA460024Q0083 Final.pdf | ||
| SOW_Atrium_Auditorium_Acoustic_Study.pdf |
Show all 14
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
FL-640P
Floor Box
Metal Products Group F L -6 P F lo o r B o x
The FL-640P floor box is designed for raised access floors.
This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor. The 1/4” carpet edging is available in brass or aluminum. Flat covers without flanges are also offered in black sandtex.
The innovation continues to the “transformable” back box.
The FL-640P’s internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available. The 4” through 10” deep boxes are UL listed. The unit includes all the necessary internal plates and brackets to make “pre” and “post” installation compartment changes quick and easy. Using this system, both high and low voltage gang configurations along with line voltage compartment isolation can be implemented
“on the fly”. This makes just about any cabling/ connector scenario possible.
DESCRIPTIONDESCRIPTION
COVER OPTIONSCOVER OPTIONSCOVER DETAIL DRAWINGSCOVER DETAIL DRAWINGS
SPECIFICATIONSSPECIFICATIONS
Size: Box: 13.5” x 12” x depth
Cover: 14” x 12.5” x .125”
Edging: Height: .25”
Material: Brass or Aluminum
Weight: Box: 20.5 lbs. Cover: 10 lbs.
Flat Covers also available.
• 11-gauge steel temporary construction cover included
• 11-gauge finished steel cover with choice of carpet edging
• Mitered brass or aluminum carpet edging .25” high
• Stainless steel compression latches on models with carpet flanges
• Lift-off full access door
244 Bergen Boulevard, Woodland Park, NJ 07424
Phone: 973.785.4347 · Fax: 973.785.4207
Web: www.fsrinc.com · E-mail: sales@fsrinc.com
* Black cover not pictured.
Floor Box Covers and Back Boxes ordering information FL-640P – Requires ordering Cover and Back Box separately
Item# Part # Description
Covers - UL Listed
15529 FL-640P-BLP-C Cover With 1/4” Brass Carpet Flange (Lift off door)
18272 FL-640P-SLP-C Cover With 1/4” Aluminum Carpet Flange (Lift off door)
15983 FL-640P-SSQ-C Cover With 1/4” Square Aluminum Flange (Lift off door)
15533 FL-640P-BLK-C* Cover (No Flange) With Hinged Door in Black Sandtex
Back boxes - UL Listed - Includes Steel Construction Cover
15527 FL-640P-4-B FL-640P Back Box - 4” Deep
15528 FL-640P-6-B FL-640P Back Box - 6” Deep
18081 FL-640P-5-B FL-640P box bottom - 5” Deep
17171 FL-640P-8-B FL-640P Back Box - 8” Deep
17178 FL-640P-10-B FL-640P Back Box - 10” Deep
FL-640P-BSQFL-640P-BLP FL-640P-SLP FL-640P-SSQ
LIT1059i
A
A
SECTION A-A
11.97
13.47 .25
STYLE 2
STYLE 3
A
A
SECTION A-A
13.77
15.27
STYLE MODEL NUMBER
1 FL-640P-BLP-C COVER WITH 1/4” BRASS CARPET FLANGE
(LIFT OFF DOOR)
2 FL-640P-BSQ-C COVER WITH 1/4” SQUARE BRASS CARPET
FLANGE (LIFT OFF DOOR)
3 FL-640P-BLK-C COVER (NO FLANGE) WITH HINGED DOOR
IN BLACK SANDTEX
1 FL-640P-SLP-C COVER WITH 1/4” ALUMINUM CARPET
FLANGE (LIFT OFF DOOR)
2 FL-640P-SSQ-C COVER WITH 1/4” SQUARE ALUMINUM
CARPET FLANGE (LIFT OFF DOOR)
DESCRIPTION
STYLE 1
A
A
SECTION A-A
11.97
13.47 .25
Beveled Edge
FSR also offers a line of larger Fire-Resistant floor boxes.
Our FL-500P-6-FRK and FL-605P-6-FRK floor solutions expand the versatility of our floor box line by providing enhanced, fire-resistant versions of our existing products. Our FRK kits are UL listed and comply with UL 263 Fire Resistance Ratings.
FIRE-RESISTANT FLOOR BOXESFIRE-RESISTANT FLOOR BOXES
See Lit 1458 FR Brochure for details.
Specifications are subject to change without notice.
MADE IN
THE USA
BACK BOX DETAIL DRAWINGSBACK BOX DETAIL DRAWINGS PLATE CONFIGURATIONS PLATE CONFIGURATIONS
Plate Configuration 2-2 (b) Plate Configuration 2-3 Plate Configuration 3-1
Plate Configuration 4-1 Plate Configuration 6-0
FL-640P “TRANSFORMABLE” BACKBOXFL-640P “TRANSFORMABLE” BACKBOX
CENTER DIVIDERS
Remove to run cables across compartments
COMPARTMENT DIVIDERS
Remove or arrange as needed to isolate compartments
WARNING: Must be used on a compartment where line voltage wiring is present
GANG PLATE DIVIDERS
Add and remove as needed to form a multitude of gang arrangement possibilities
Plate Configuration 3-2
F L -6 P F lo o r B o x
12.16
BOX
13.50 BOX
15.00
13.50
4.20
FL-640P-4
Length and width of backbox is the same for all models.
PLATE CONFIGURATIONSPLATE CONFIGURATIONS
Plate Configuration 1-1-2 Plate Configuration 1-1-3 Plate Configuration 1-3-1
Plate Configuration 2-2 Plate Configuration 2-3Plate Configuration 1-4
Plate Configuration 4-1 Plate Configuration 5-0 Plate Configuration 1-3 (a)
Plate Configuration 1-4 Plate Configuration 2-2Plate Configuration 1-3 (b)
6.20
12.16
BOX
5.20
12.16
BOX
8.20
12.16
BOX
10.20
FL-640P-6FL-640P-5
FL-640P-8 FL-640P-10
6-gang side shown (4” through 10” boxes).
Box can be configured as shown, using the included parts.
5-gang side shown (4” through 10” boxes).
Box can be configured as shown, using the included parts.
KNOCKOUT SPECIFICATIONS
FL-640P-4
KO trade size Qty/Box 3/4” 4
3/4” / 1.00” Concentric 4
1.00 / 1-1/4” Concentric 4
1-1/2” 4
2.00” 4
KNOCKOUT SPECIFICATIONS
FL-640P-4 thru -8 KO trade size Qty/Box 3/4” 4
3/4” / 1.00” Concentric 4
1.00 / 1-1/4” /1-1/2” Concentric 4
1-1/2” 4
2.00” 4
Plate Configuration 4-1 Plate Configuration 6-0
FL-640P “TRANSFORMABLE” BACKBOXFL-640P “TRANSFORMABLE” BACKBOX
CENTER DIVIDERS
Remove to run cables across compartments
COMPARTMENT DIVIDERS
Remove or arrange as needed to isolate compartments
WARNING: Must be used on a compartment where line voltage wiring is present
GANG PLATE DIVIDERS
Add and remove as needed to form a multitude of gang arrangement possibilities
Plate Configuration 3-2
F L -6 P F lo o r B o x
12.16
BOX
13.50 BOX
15.00
13.50
4.20
FL-640P-4
Length and width of backbox is the same for all models.
PLATE CONFIGURATIONSPLATE CONFIGURATIONS
Plate Configuration 1-1-2 Plate Configuration 1-1-3 Plate Configuration 1-3-1
Plate Configuration 2-2 Plate Configuration 2-3Plate Configuration 1-4
Plate Configuration 4-1 Plate Configuration 5-0 Plate Configuration 1-3 (a)
Plate Configuration 1-4 Plate Configuration 2-2Plate Configuration 1-3 (b)
6.20
12.16
BOX
5.20
12.16
BOX
8.20
10.20
FL-640P-6FL-640P-5
FL-640P-8 FL-640P-10
6-gang side shown (4” through 10” boxes).
Box can be configured as shown, using the included parts.
5-gang side shown (4” through 10” boxes).
Box can be configured as shown, using the included parts.
KNOCKOUT SPECIFICATIONS
FL-640P-4
KO trade size Qty/Box 3/4” 4
3/4” / 1.00” Concentric 4
1.00 / 1-1/4” Concentric 4
1-1/2” 4
2.00” 4
KNOCKOUT SPECIFICATIONS
FL-640P-4 thru -8 KO trade size Qty/Box 3/4” 4
3/4” / 1.00” Concentric 4
1.00 / 1-1/4” /1-1/2” Concentric 4
Plate Configuration 4-1 Plate Configuration 6-0
FL-640P “TRANSFORMABLE” BACKBOXFL-640P “TRANSFORMABLE” BACKBOX
CENTER DIVIDERS
Remove to run cables across compartments
COMPARTMENT DIVIDERS
Remove or arrange as needed to isolate compartments
WARNING: Must be used on a compartment where line voltage wiring is present
GANG PLATE DIVIDERS
Add and remove as needed to form a multitude of gang arrangement possibilities
Plate Configuration 3-2
F L -6 P F lo o r B o x
12.16
BOX
13.50 BOX
15.00
13.50
4.20
FL-640P-4
Length and width of backbox is the same for all models.
PLATE CONFIGURATIONSPLATE CONFIGURATIONS
Plate Configuration 1-1-2 Plate Configuration 1-1-3 Plate Configuration 1-3-1
Plate Configuration 2-2 Plate Configuration 2-3Plate Configuration 1-4
Plate Configuration 4-1 Plate Configuration 5-0 Plate Configuration 1-3 (a)
Plate Configuration 1-4 Plate Configuration 2-2Plate Configuration 1-3 (b)
6.20
12.16
BOX
5.20
12.16
BOX
8.20
10.20
FL-640P-6FL-640P-5
FL-640P-8 FL-640P-10
6-gang side shown (4” through 10” boxes).
Box can be configured as shown, using the included parts.
5-gang side shown (4” through 10” boxes).
Box can be configured as shown, using the included parts.
KNOCKOUT SPECIFICATIONS
FL-640P-4
KO trade size Qty/Box 3/4” 4
3/4” / 1.00” Concentric 4
1.00 / 1-1/4” Concentric 4
1-1/2” 4
2.00” 4
KNOCKOUT SPECIFICATIONS
FL-640P-4 thru -8 KO trade size Qty/Box 3/4” 4
3/4” / 1.00” Concentric 4
1.00 / 1-1/4” /1-1/2” Concentric 4
Metal Products Group F L -6 P F lo o r B o x
The FL-640P floor box is designed for raised access floors.
This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor. The 1/4” carpet edging is available in brass or aluminum. Flat covers without flanges are also offered in black sandtex.
The innovation continues to the “transformable” back box.
The FL-640P’s internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available. The 4” through 10” deep boxes are UL listed. The unit includes all the necessary internal plates and brackets to make “pre” and “post” installation compartment changes quick and easy. Using this system, both high and low voltage gang configurations along with line voltage compartment isolation can be implemented
“on the fly”. This makes just about any cabling/ connector scenario possible.
DESCRIPTIONDESCRIPTION
COVER OPTIONSCOVER OPTIONSCOVER DETAIL DRAWINGSCOVER DETAIL DRAWINGS
SPECIFICATIONSSPECIFICATIONS
Size: Box: 13.5” x 12” x depth
Cover: 14” x 12.5” x .125”
Edging: Height: .25”
Material: Brass or Aluminum
Weight: Box: 20.5 lbs. Cover: 10 lbs.
Flat Covers also available.
• 11-gauge steel temporary construction cover included
• 11-gauge finished steel cover with choice of carpet edging
• Mitered brass or aluminum carpet edging .25” high
• Stainless steel compression latches on models with carpet flanges
• Lift-off full access door
244 Bergen Boulevard, Woodland Park, NJ 07424
Phone: 973.785.4347 · Fax: 973.785.4207
Web: www.fsrinc.com · E-mail: sales@fsrinc.com
* Black cover not pictured.
Floor Box Covers and Back Boxes ordering information FL-640P – Requires ordering Cover and Back Box separately
Item# Part # Description
Covers - UL Listed
15529 FL-640P-BLP-C Cover With 1/4” Brass Carpet Flange (Lift off door)
18272 FL-640P-SLP-C Cover With 1/4” Aluminum Carpet Flange (Lift off door)
15983 FL-640P-SSQ-C Cover With 1/4” Square Aluminum Flange (Lift off door)
15533 FL-640P-BLK-C* Cover (No Flange) With Hinged Door in Black Sandtex
Back boxes - UL Listed - Includes Steel Construction Cover
15527 FL-640P-4-B FL-640P Back Box - 4” Deep
15528 FL-640P-6-B FL-640P Back Box - 6” Deep
18081 FL-640P-5-B FL-640P box bottom - 5” Deep
17171 FL-640P-8-B FL-640P Back Box - 8” Deep
17178 FL-640P-10-B FL-640P Back Box - 10” Deep
FL-640P-BSQFL-640P-BLP FL-640P-SLP FL-640P-SSQ
LIT1059i
A
A
SECTION A-A
11.97
13.47 .25
STYLE 2
STYLE 3
A
A
SECTION A-A
13.77
15.27
STYLE MODEL NUMBER
1 FL-640P-BLP-C COVER WITH 1/4” BRASS CARPET FLANGE
(LIFT OFF DOOR)
2 FL-640P-BSQ-C COVER WITH 1/4” SQUARE BRASS CARPET
FLANGE (LIFT OFF DOOR)
3 FL-640P-BLK-C COVER (NO FLANGE) WITH HINGED DOOR
IN BLACK SANDTEX
1 FL-640P-SLP-C COVER WITH 1/4” ALUMINUM CARPET
FLANGE (LIFT OFF DOOR)
2 FL-640P-SSQ-C COVER WITH 1/4” SQUARE ALUMINUM
CARPET FLANGE (LIFT OFF DOOR)
DESCRIPTION
STYLE 1
A
A
SECTION A-A
11.97
13.47 .25
Beveled Edge
FSR also offers a line of larger Fire-Resistant floor boxes.
Our FL-500P-6-FRK and FL-605P-6-FRK floor solutions expand the versatility of our floor box line by providing enhanced, fire-resistant versions of our existing products. Our FRK kits are UL listed and comply with UL 263 Fire Resistance Ratings.
FIRE-RESISTANT FLOOR BOXESFIRE-RESISTANT FLOOR BOXES
See Lit 1458 FR Brochure for details.
Specifications are subject to change without notice.
Metal Products Group F L -6 P F lo o r B o x
The FL-640P floor box is designed for raised access floors.
This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor. The 1/4” carpet edging is available in brass or aluminum. Flat covers without flanges are also offered in black sandtex.
The innovation continues to the “transformable” back box.
The FL-640P’s internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available. The 4” through 10” deep boxes are UL listed. The unit includes all the necessary internal plates and brackets to make “pre” and “post” installation compartment changes quick and easy. Using this system, both high and low voltage gang configurations along with line voltage compartment isolation can be implemented
“on the fly”. This makes just about any cabling/ connector scenario possible.
DESCRIPTIONDESCRIPTION
COVER OPTIONSCOVER OPTIONSCOVER DETAIL DRAWINGSCOVER DETAIL DRAWINGS
SPECIFICATIONSSPECIFICATIONS
Size: Box: 13.5” x 12” x depth
Cover: 14” x 12.5” x .125”
Edging: Height: .25”
Material: Brass or Aluminum
Weight: Box: 20.5 lbs. Cover: 10 lbs.
Flat Covers also available.
• 11-gauge steel temporary construction cover included
• 11-gauge finished steel cover with choice of carpet edging
• Mitered brass or aluminum carpet edging .25” high
• Stainless steel compression latches on models with carpet flanges
• Lift-off full access door
244 Bergen Boulevard, Woodland Park, NJ 07424
Phone: 973.785.4347 · Fax: 973.785.4207
Web: www.fsrinc.com · E-mail: sales@fsrinc.com
* Black cover not pictured.
Floor Box Covers and Back Boxes ordering information FL-640P – Requires ordering Cover and Back Box separately
Item# Part # Description
Covers - UL Listed
15529 FL-640P-BLP-C Cover With 1/4” Brass Carpet Flange (Lift off door)
18272 FL-640P-SLP-C Cover With 1/4” Aluminum Carpet Flange (Lift off door)
15983 FL-640P-SSQ-C Cover With 1/4” Square Aluminum Flange (Lift off door)
15533 FL-640P-BLK-C* Cover (No Flange) With Hinged Door in Black Sandtex
Back boxes - UL Listed - Includes Steel Construction Cover
15527 FL-640P-4-B FL-640P Back Box - 4” Deep
15528 FL-640P-6-B FL-640P Back Box - 6” Deep
18081 FL-640P-5-B FL-640P box bottom - 5” Deep
17171 FL-640P-8-B FL-640P Back Box - 8” Deep
17178 FL-640P-10-B FL-640P Back Box - 10” Deep
FL-640P-BSQFL-640P-BLP FL-640P-SLP FL-640P-SSQ
LIT1059i
A
A
SECTION A-A
11.97
13.47 .25
STYLE 2
STYLE 3
A
A
SECTION A-A
13.77
15.27
STYLE MODEL NUMBER
1 FL-640P-BLP-C COVER WITH 1/4” BRASS CARPET FLANGE
(LIFT OFF DOOR)
2 FL-640P-BSQ-C COVER WITH 1/4” SQUARE BRASS CARPET
FLANGE (LIFT OFF DOOR)
3 FL-640P-BLK-C COVER (NO FLANGE) WITH HINGED DOOR
IN BLACK SANDTEX
1 FL-640P-SLP-C COVER WITH 1/4” ALUMINUM CARPET
FLANGE (LIFT OFF DOOR)
2 FL-640P-SSQ-C COVER WITH 1/4” SQUARE ALUMINUM
CARPET FLANGE (LIFT OFF DOOR)
DESCRIPTION
STYLE 1
A
A
SECTION A-A
11.97
13.47 .25
Beveled Edge
FSR also offers a line of larger Fire-Resistant floor boxes.
Our FL-500P-6-FRK and FL-605P-6-FRK floor solutions expand the versatility of our floor box line by providing enhanced, fire-resistant versions of our existing products. Our FRK kits are UL listed and comply with UL 263 Fire Resistance Ratings.
FIRE-RESISTANT FLOOR BOXESFIRE-RESISTANT FLOOR BOXES
See Lit 1458 FR Brochure for details.
Specifications are subject to change without notice.
| Atrium Conduit.Stage box.pdf |
| FSR FL-640P Spec Sheet LIT1059I.pdf |
| FSR Floor Box FL-640P-8 drawing.pdf |
File details come from the government source that posted it. Updated .