A5 4152VL04 Technical Ordering Data Sheet.docx

ORDERING DATA SHEET – GENERAL

NOUN NAME: RADIOACTIVE SOURCE

DESCRIPTION:

1 ea Nine nuclide gamma calibration source in the form of 500 ml solid epoxy matrix in customer provided 500 ml Marinelli beaker.

-Nuclide mixture: Cd-109, Co-57, Te-123m, Cr-51, Sn 113, Sr-85, Cs-137, Y-88, Co-60 with nuclide activity ratios selected to provide similar count rates on typical coaxial high-purity germanium detectors.

-Active volume: 500 ml -Density of solid: 1.5 g/cc.

-Total source activity shall be 3.0 microcuries (–15%, +0%) -The vendor must insure that the source activity is not greater than exempt quantity per 10 CFR 30.

-The reported radioactivity uncertainty of each nuclide shall not exceed ± 5% at the 99% confidence level.

-Surface contamination levels on the source and packing materials must be less than 450 pCi/100cm^2.

MATERIAL: N/A

MANUFACTURER/VENDOR P/N: N/A

QUANTITY: 1 each

ADDITIONAL NOTES:

CERTIFICATION

-A Certificate of Calibration is required for the source and shall be provided from the vendor that documents:

-The source shall be National Institute of Standards and Technology (NIST) traceable -The total activity of the source, reference time, and date -The activity, gamma emission rate, and associated uncertainty of each nuclide -The activity of any gamma emitting impurities detected -Density and volume of active volume -The vendor assigned source serial number -ISO Classification -The results and date of leakage testing

SHIPPING REQUIREMENTS

Source will be shipped by vendor to:

(N3999H) Puget Sound Naval Shipyard & IMF 1400 Farragut Avenue, Building 450, Door 2 Bremerton, WA 98314-5001 Attn: C/2380.4R - R. Nicole Van Den Eijkel (360) 801-6048 POC: C/105.55 Marc Sobolesky (360) 340-4797

Prior to shipping, vendor will make voice contact via phone with Nicole Van Den Eijkel or their representative at (360) 476-3520 with date of shipment and shipment tracking information (i.e. UPS/FEDEX tracking numbers). A phone message will not be considered voice contact.

Changes to specification or other technical requirements are not allowed without Shipyard approval via the Administrative Contracting Officer (ACO).

JOB ORDER

991566SOUR

KEY OP

H01

KO ITEM

REV

IDN

4152VL04

IDN REV

2305.3 Form; Rev 02/2020