A06_Attachment_B2_-_FOMA-2021-1185-MP-03_Fabrication_Details.pdf

Fabrication Details

Fort Matanzas National Monument

06/21/2021

NPS Sign Program Harpers Ferry Center

Interpretive Design Center Harpers Ferry, WV 25425

304-535-4069 Drawings are for design-intent only. Contractor shall determine and engineer final fabrication details, which shall fulfill the required function while honoring the appearance of the drawing and provide shop drawings for approval by COR.

Attachment B2

Wood Panel

D0.0A | FOMA

PARK

Fort Matanzas National Monument

PROJECT NUMBER

FOMA-2021-1185-MP

UNIT | AREA

DRAWING SCALE

1/2” = 1’-0”

SIGN CATEGORY

Identity

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

01-09-2020

DESCRIPTION

PANEL:

Routed Wood

STRUCTURE:

Existing Base, Contractor to Determine Mounts

ENLARGE FOR FULL SCALE

ID Colors

Match Colors to Matthews Paint or Equivalent Pantone:

142.5”

52"

1/2" Routed Dado Painted Overbar Color

Panle Detail

PMS 449 C

ID Overbar

Matthews Paint 63852

PMS 7531 C

ID Panel

Matthews Paint 63853 PMS Warm Gray 1 C

Typography

Matthews Paint 63854

Fort Matanzas National Monument 8635 A1A South National Park Service | U.S. Department of the Interior

Wood Panel, Mount to Existing Base

D0.0B | FOMA

PARK

Fort Matanzas National Monument

PROJECT NUMBER

FOMA-2021-1185-MP

UNIT | AREA

DRAWING SCALE

As Indicated

SIGN CATEGORY

Identity

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

01-09-2020

DESCRIPTION

PANEL:

Routed Wood

STRUCTURE:

Existing Base, Contractor to Determine Mounts

ENLARGE FOR FULL SCALE

Double Sided Western Red Cedar Sign Mounted to existing base cale: 1/2”=1’-0”

All mounts to be painted to match:

Black Bean Soup Matthews Paint

MP63855

PMS 439

Double Sided Western Red Cedar Sign Mounted to existing base

Top View, Scale: 1/2”=1’-0”

Fort Matanzas National Monument 8635 A1A South National Park Service | U.S. Department of the Interior

Painted Western Red Cedar Panel With Graphics

Painted Western Red Cedar Panel With Graphics

Existing Sign Base

Support Structure Determined and Engineered by Contractor, Painted Black Bean Soup

Contractor to design and engineer mounting structure to fit within existing sign base and provide removal/demolition of existing sign panels. Mounts may not pass through sign face.

Routing Details

Wood Panel Routing Detail

D0.0C | FOMA

PARK

Fort Matanzas National Monument

PROJECT NUMBER

FOMA-2021-1185-MP

UNIT | AREA

DRAWING SCALE

Not to Scale

SIGN CATEGORY

Identity

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

01-09-2020

DESCRIPTION

PANEL:

Routed Wood

STRUCTURE:

Existing Base, Contractor to Determine Mounts

ENLARGE FOR FULL SCALE

Wood Panel

1/

2"

3/ 8"

Routed Frutiger Typography Section Cut

Wood Panel

1/8" 1/8"

45° 45°

1/

2"

Routed NPS Rawlinson Typography Section Cut

Wood Panel, Mounts

D0.0D | FOMA

PARK

Fort Matanzas National Monument

PROJECT NUMBER

FOMA-2021-1185-MP

UNIT | AREA

DRAWING SCALE

Not to Scale

SIGN CATEGORY

Identity

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

01-09-2020

DESCRIPTION

PANEL:

Routed Wood

STRUCTURE:

Existing Base, Contractor to Determine Mounts

ENLARGE FOR FULL SCALE

100%

Material Overview and Fabrication Specifications

Wood Western Red Cedar for NPS Park Identity Signs:

WRC for NPS Park Identity signs shall be laminated clear heart, kiln-dried vertical grain with a maximum moisture content not to exceed 12%. Cedar shall be selected per grading rules of the Western Red Cedar Lumber Association. Components of all panels including end caps shall be fabricated from the same grade.

Panel Size:

Sign panel shall be fabricated based on dimensions and format specified in the Sign Drawing Package. Panel sizes, specifications, dimensions, typography, color, and proportions shall not be altered.

Panel Assembly:

Panels shall be constructed using clear heart, vertical grain, kiln-dried wood through, glued up one board thick using 2" nominal size dimensional lumber (2" x 6", 2" x 8", 2" x 10").

Panels shall be glued using a phenolic resorcinol moisture resistant adhesive with all surface joints covered. Panels shall be clamped and cured for a minimum of 24 hours or per the manufacturers specifications. Panel fabrication shall occur in air temperatures between 70 and 90 degrees Fahrenheit during drying, adhesive application, and curing.

After curing the panel vertical edges shall be finished with a 2" x 2" vertical end strip, faced glued and reinforced with 3", No 12 stainless steel Phillips flathead screws placed 8" on center. Screw heads shall be countersunk to a depth of 3/8" and filled with glue-in wood plugs.

After end strips have cured the panels shall be machine planed to a finish thickness of 1-1/2". All surfaces shall be finish sanded smooth and face and back edges shall rounded to a radius of 1/8".

Panels shall not be finished with hand planes, hand-held belt, orbital, or vibrating sanders.

Graphic Layout:

Graphic layout of panels shall be as shown on the attached drawings. Graphics to be accurately reproduced from plotted outline template or directly from computer to router based on full size digital vector art. Contractor shall use an accurate grid to ensure layout is aligned vertically and horizontally.

Typography shall be NPS Rawlinson Heavy and Frutiger Bold as shown on attached drawings. Typography shall not be altered, manipulated, or changed. Substitute fonts shall not be used.

NPS Rawlinson Heavy shall be Machine-routed unless otherwise specified with a 90 degree “V" router bit with a 1/8" vertical, flat sidewall inset. Routed letters shall conform to the same size artwork. Routing depth shall be uniform. Corners of type smaller than 3" cap height shall have a radius no greater than 0.0625.

Type larger than 3" cap height shall have a corner radius no greater than 0.125".

Frutiger Bold typography shall be Machine-routed unless otherwise specified using a vertical-sided, flat-bottom router bit.

Routing depth to be 0.375".

A 0.250" deep dado shall be routed in the panel between the main panel and the overbar. Dado height shall be determined based on cap height of main typography (0.0833 x cap height - .25" for 3", 0.333" for 4", .50 for 6"). Dado shall be routed in to the main panel field with the overbar being full height. Routed dado shall be painted same color as the overbar.

NPS Alternate Panel layouts receive a vertical dado in addition to the horizontal dado. Vertical dados shall be routed to a depth of 0.250". Vertical dado width shall be based on the cap height of main typography (0.0833 x cap height - .25" for 3", 0.333" for 4", .50 for 6"). Vertical dados shall be painted as specified below.

Panels receiving an NPS Arrowhead shall be Machine-routed to a depth of 0.125" using a vertical-sided, flat-bottom router bit in Overbar section of panel for NPS Standard Panel layouts or Main Sign Panel for NPS Alternate layouts. Arrowhead shiloutte routed in the sign panel shall be oversized by 1/8" to accommodate inset NPS Arrowhead.

All routed type, dados, and insets shall be sanded smooth and clean. All edges shall be free of burrs and all edges eased prior to application of primer coats and paint.

Paint:

Prior to painting panels shall be Machine drum sanded. Panels shall not be finished with hand planes, hand-held belt, orbital, or vibrating sanders. All sawdust and sanding residue shall be removed from the sign. Panel shall be properly cleaned per paint manufacturer’s instructions.

Panel surfaces shall be wiped clean using a Matthews (or approved equal) Speed Prep Cleaner formulated for use on wood.

All panel surfaces shall be completely dry prior to primer applica-tion.

Panels shall be sprayed using a VOC compliant, Mathews White Epoxy Primer (or approved equal) on all surfaces. Panels shall receive a minimum of two primer coats prior to top coat finishes.

Primer coats shall be applied in strict accordance with the paint manufacturer’s specifications

Double Post Ground Mount Assembly (Steel Post, Double-sided, Wood Panel)

D0.0E | FOMA

PARK

Fort Matanzas National Monument

PROJECT NUMBER

FOMA-2021-1185-MP

UNIT | AREA

DRAWING SCALE

Not to Scale

SIGN CATEGORY

Identity

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

01-09-2020

DESCRIPTION

PANEL:

Routed Wood

STRUCTURE:

Existing Base, Contractor to Determine Mounts

ENLARGE FOR FULL SCALE

Final top coat colors shall be a Matthews Satin VOC, Semi Gloss finish applied per the graphic layouts. Panel colors shall be per NPS specifications.

1. Panel Overbar and dado between panel face and overbar shall be Matthews MP63852, NPS River Rock, Satin VOC Semi Gloss (or approved equal). The Overbar color shall wrap to panel sides;

2. Main Panel Face, sides, and panel back shall be Matthews MP 63853, Northwood Brown, Satin VOC Semi Gloss (or approved equal);

3. Panel Typography and Vertical Dado on NPS Alternate Panel layouts shall be Matthews M P63854, NPS Old Prairie, Satin VOC Semi Gloss (or approved equal). Edges between type, dados, and flat panel sections shall be clean and sharp. Ragged edges and transitions, drips, and oversprays and not acceptable.

After a top coat paint application all post and frame surfaces shall receive a Matthews (or approved equal) Satin Clear, MP281-228, Satin Polyurethane Finish. The finish shall be applied in strict accordance with the paint manufacturer’s specifications.

Steel Steel Sign Structure: Wood panels shall be attached to a steel mounting system of the contractor’s design. Contractor to provide detailed shop drawings.

Paint:

Prior to painting, all steel components shall be sanded, sand blasted, or bead blasted to remove all oils, burrs, and rust. Rust shall be completely removed from all surfaces, edges, and corners.

Exposed welds shall be ground clean and smooth. Cleaning of steel surfaces shall be in strict accordance with paint manufactur-er’s specifications.

Prior to primer application all steel components shall be cleaned with a Matthews (or approved equal) Speed Prep Cleaner formulated for use on steel. All surfaces shall be completely dry prior to primer application.

After cleaning, all steel components shall be sprayed using a VOC compliant, Mathews White Epoxy Primer (or approved equal) on all surfaces. Components shall receive a minimum of two primer coats prior to top coat finishes. Primer coats shall be applied in strict accordance with the paint manufacturer’s specifications.

Final top coat colors shall be a Matthews Satin VOC, Semi Gloss finish (or approved equal). Post and steel mounting plate colors shall be per NPS specifications or as otherwise specified on the drawings. Post and steel mounting plate assemblies shall receive a minimum of two top coat finishes.

Paint shall be applied smooth and clean with no oversprays, drips, paint runs, or bubbles. Paint shall be applied so that weep holes are clear and not plugged.

1. All sign mounting components shall be Matthews MP63855, NPS Black Bean Soup, Satin VOC Semi Gloss (or approved equal).

After final top coat paint applications all steel post and mounting plate surfaces shall receive a Matthews Satin Clear, MP281-228, Satin Polyurethane Finish (or approved equal). The finish shall be applied in strict accordance with the paint manufacturer’s specifications.

Double Post Ground Mount Assembly (wood panel)

D1.0 | FOMA

PARK

Fort Matanzas National Monument

PROJECT NUMBER

FOMA-2021-1185-MP

UNIT | AREA

DRAWING SCALE

1/2” =1’-0”

SIGN CATEGORY

Identity

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

01-09-2020

DESCRIPTION

PANEL:

Routed Wood

STRUCTURE:

Painted Steel Posts

ENLARGE FOR FULL SCALE

8" x 6" x 1/8" Thick Steel Posts with Welded 3/16" Thick Post Cap and Welded 13" x 11" x 1/2" Thick Steel Base Plate, Painted Black Bean Soup.

Painted steel frame with support angles to attach sign to structure.

Contractor to determine frame design and must submit for approval. All mounting should be hidden. No bolts on sign face.

Contractor to determine and engineer footer, footer depth, rebar, footer substrate, concrete mix per local codes and to withstand local conditions.

Front and Back Elevations Side Elevation

7’-4”

8’-8”

GL

3’-10”

2’

5’-10”

8" 6"

Matanzas Beach

Fort Matanzas National Monument National Park Service U.S. Department of the Interior

Wood Panel

D1.0A | FOMA

PARK

Fort Matanzas National Monument

PROJECT NUMBER

FOMA-2021-1185-MP

UNIT | AREA

DRAWING SCALE

1/2” = 1’-0”

SIGN CATEGORY

Identity

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

01-09-2020

DESCRIPTION

PANEL:

Routed Wood

STRUCTURE:

Painted Steel Posts

Match Colors to Matthews Paint or Equivalent Pantone:

88”

46"

1/2" Routed Dado Painted Overbar Color

Panel Detail

PMS 449 C

ID Overbar

Matthews Paint 63852

PMS 7531 C

ID Panel

Matthews Paint 63853 PMS Warm Gray 1 C

Typography

Matthews Paint 63854

Matanzas Beach

Fort Matanzas National Monument National Park Service

Double Post Ground Mount Assembly (Steel Post, Double-sided Wood Panel)

D1.0B | FOMA

PARK

Fort Matanzas National Monument

PROJECT NUMBER

FOMA-2021-1185-MP

UNIT | AREA

DRAWING SCALE

As Indicated

SIGN CATEGORY

Identity

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

01-09-2020

DESCRIPTION

PANEL:

Routed Wood

STRUCTURE:

Painted Steel Posts

ENLARGE FOR FULL SCALE

GL

Double Post Ground Mount Assembly

Typical Construction, Scale: 3/4”=1’-0”

Black Bean Soup Matthews Paint

MP63855

PMS 439

Double Post Ground Mount Assembly

Top View, Scale: 3/4”=1’-0”

See Base Plate Connection Detail Page D1.0C

Painted Western Red Cedar Panel With Graphics

Painted Western Red Cedar Panel With Graphics

8" x 6" x 1/8" Thick Steel Post with Welded 3/16" Thick Post Cap and Welded 17" x 11" x 1/2" Thick Steel Base Plate, Painted Black Bean Soup

8"

1 1/2"

1 1/2" 3"

Support Structure Determined and Engineered by Contractor, Painted Black Bean Soup

6"

Sample Frame Drawing. Contractor to determine and engineer frame mounting structure.

8" x 6" x 1/8" Thick Steel Post with Welded 3/16" Thick

Post Cap

13" x 11" Steel Base Plate Welded to Steel Post

1/2"

Routing Details

Wood Panel Routing Detail

D1.0C | FOMA

PARK

Fort Matanzas National Monument

PROJECT NUMBER

FOMA-2021-1185-MP

UNIT | AREA

DRAWING SCALE

Not to Scale

SIGN CATEGORY

Identity

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

01-09-2020

DESCRIPTION

PANEL:

Routed Wood

STRUCTURE:

Painted Steel Posts

ENLARGE FOR FULL SCALE

Wood Panel

1/

2"

3/ 8"

Routed Frutiger Typography Section Cut

Wood Panel

1/8" 1/8"

45° 45°

1/

2"

Routed NPS Rawlinson Typography Section Cut

3/16

3/16

1/2 - 13 Stainless Steel Hex Nut

1/2" Stainless Steel Flat Washer

17" x 11" x 1/2" Thick Steel Base Plate Welded to Post

1/2-13 x 12" Long Stainless Steel L-Hook Anchor Bolt

1/2 - 13 Stainless Steel Acorn Nut

Base Plate Connection Detail for Double Post assembly

Scale: 3" = 1'-0"

Wood Panel, Mounts, Double Post Assembly

D1.0D | FOMA

PARK

Fort Matanzas National Monument

PROJECT NUMBER

FOMA-2021-1185-MP

UNIT | AREA

DRAWING SCALE

Not to Scale

SIGN CATEGORY

Identity

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

01-09-2020

DESCRIPTION

PANEL:

Routed Wood

STRUCTURE:

Steel Posts

ENLARGE FOR FULL SCALE

100%

Material Overview and Fabrication Specifications

Wood Western Red Cedar for NPS Park Identity Signs:

WRC for NPS Park Identity signs shall be laminated clear heart, kiln-dried vertical grain with a maximum moisture content not to exceed 12%. Cedar shall be selected per grading rules of the Western Red Cedar Lumber Association. Components of all panels including end caps shall be fabricated from the same grade.

Panel Size:

Sign panel shall be fabricated based on dimensions and format specified in the Sign Drawing Package. Panel sizes, specifications, dimensions, typography, color, and proportions shall not be altered.

Panel Assembly:

Panels shall be constructed using clear heart, vertical grain, kiln-dried wood through, glued up one board thick using 2" nominal size dimensional lumber (2" x 6", 2" x 8", 2" x 10").

Panels shall be glued using a phenolic resorcinol moisture resistant adhesive with all surface joints covered. Panels shall be clamped and cured for a minimum of 24 hours or per the manufacturers specifications. Panel fabrication shall occur in air temperatures between 70 and 90 degrees Fahrenheit during drying, adhesive application, and curing.

After curing the panel vertical edges shall be finished with a 2" x 2" vertical end strip, faced glued and reinforced with 3", No 12 stainless steel Phillips flathead screws placed 8" on center. Screw heads shall be countersunk to a depth of 3/8" and filled with glue-in wood plugs.

After end strips have cured the panels shall be machine planed to a finish thickness of 1-1/2". All surfaces shall be finish sanded smooth and face and back edges shall rounded to a radius of 1/8".

Panels shall not be finished with hand planes, hand-held belt, orbital, or vibrating sanders.

Graphic Layout:

Graphic layout of panels shall be as shown on the attached drawings. Graphics to be accurately reproduced from plotted outline template or directly from computer to router based on full size digital vector art. Contractor shall use an accurate grid to ensure layout is aligned vertically and horizontally.

Typography shall be NPS Rawlinson Heavy and Frutiger Bold as shown on attached drawings. Typography shall not be altered, manipulated, or changed. Substitute fonts shall not be used.

NPS Rawlinson Heavy shall be Machine-routed unless otherwise specified with a 90 degree “V" router bit with a 1/8" vertical, flat sidewall inset. Routed letters shall conform to the same size artwork. Routing depth shall be uniform. Corners of type smaller than 3" cap height shall have a radius no greater than 0.0625.

Type larger than 3" cap height shall have a corner radius no greater than 0.125".

Frutiger Bold typography shall be Machine-routed unless otherwise specified using a vertical-sided, flat-bottom router bit.

Routing depth to be 0.375".

A 0.250" deep dado shall be routed in the panel between the main panel and the overbar. Dado height shall be determined based on cap height of main typography (0.0833 x cap height - .25" for 3", 0.333" for 4", .50 for 6"). Dado shall be routed in to the main panel field with the overbar being full height. Routed dado shall be painted same color as the overbar.

NPS Alternate Panel layouts receive a vertical dado in addition to the horizontal dado. Vertical dados shall be routed to a depth of 0.250". Vertical dado width shall be based on the cap height of main typography (0.0833 x cap height - .25" for 3", 0.333" for 4", .50 for 6"). Vertical dados shall be painted as specified below.

Panels receiving an NPS Arrowhead shall be Machine-routed to a depth of 0.125" using a vertical-sided, flat-bottom router bit in Overbar section of panel for NPS Standard Panel layouts or Main Sign Panel for NPS Alternate layouts. Arrowhead shiloutte routed in the sign panel shall be oversized by 1/8" to accommodate inset NPS Arrowhead.

All routed type, dados, and insets shall be sanded smooth and clean. All edges shall be free of burrs and all edges eased prior to application of primer coats and paint.

Paint:

Prior to painting panels shall be Machine drum sanded. Panels shall not be finished with hand planes, hand-held belt, orbital, or vibrating sanders. All sawdust and sanding residue shall be removed from the sign. Panel shall be properly cleaned per paint manufacturer’s instructions.

Panel surfaces shall be wiped clean using a Matthews (or approved equal) Speed Prep Cleaner formulated for use on wood.

All panel surfaces shall be completely dry prior to primer applica-tion.

Panels shall be sprayed using a VOC compliant, Mathews White Epoxy Primer (or approved equal) on all surfaces. Panels shall receive a minimum of two primer coats prior to top coat finishes.

Primer coats shall be applied in strict accordance with the paint manufacturer’s specifications

Double Post Ground Mount Assembly (Steel Post, Double-sided, Wood Panel)

D1.0E | FOMA

PARK

Fort Matanzas National Monument

PROJECT NUMBER

FOMA-2021-1185-MP

UNIT | AREA

DRAWING SCALE

Not to Scale

SIGN CATEGORY

Identity

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

01-09-2020

DESCRIPTION

PANEL:

Routed Wood

STRUCTURE:

Steel Posts

ENLARGE FOR FULL SCALE

Final top coat colors shall be a Matthews Satin VOC, Semi Gloss finish applied per the graphic layouts. Panel colors shall be per NPS specifications.

1. Panel Overbar and dado between panel face and overbar shall be Matthews MP63852, NPS River Rock, Satin VOC Semi Gloss (or approved equal). The Overbar color shall wrap to panel sides;

2. Main Panel Face, sides, and panel back shall be Matthews MP 63853, Northwood Brown, Satin VOC Semi Gloss (or approved equal);

3. Panel Typography and Vertical Dado on NPS Alternate Panel layouts shall be Matthews M P63854, NPS Old Prairie, Satin VOC Semi Gloss (or approved equal). Edges between type, dados, and flat panel sections shall be clean and sharp. Ragged edges and transitions, drips, and oversprays and not acceptable.

After a top coat paint application all post and frame surfaces shall receive a Matthews (or approved equal) Satin Clear, MP281-228, Satin Polyurethane Finish. The finish shall be applied in strict accordance with the paint manufacturer’s specifications.

Steel Steel Sign Structure: Wood panels shall be attached to a steel post and steel mounting plate system. Sign assemblies shall be fabricated with A-36, A-500B, or A-847 tubular steel upright posts (4" x 6" x 1/4" wall, 8" x 6" x 1/4" wall, or as otherwise specified)

Steel posts shall be mounted per the specified drawings and can include direct embedment of posts or baseplate mounting.

Steel post length shall be cut per specified drawings. Posts shall be cut to allow flush alignment of post and sign panel.

Steel mounting plate shall be fabricated with A-36, A-500B, or A-847, x 1/4" steel plate. Internal weld edges shall be welded clean and ground smooth.

Paint:

Prior to painting, all steel components shall be sanded, sand blasted, or bead blasted to remove all oils, burrs, and rust. Rust shall be completely removed from all surfaces, edges, and corners.

Exposed welds shall be ground clean and smooth. Cleaning of steel surfaces shall be in strict accordance with paint manufactur-er’s specifications.

Prior to primer application all steel components shall be cleaned with a Matthews (or approved equal) Speed Prep Cleaner formulated for use on steel. All surfaces shall be completely dry prior to primer application.

After cleaning, all steel components shall be sprayed using a VOC compliant, Mathews White Epoxy Primer (or approved equal) on all surfaces. Components shall receive a minimum of two primer coats prior to top coat finishes. Primer coats shall be applied in strict accordance with the paint manufacturer’s specifications.

Final top coat colors shall be a Matthews Satin VOC, Semi Gloss finish (or approved equal). Post and steel mounting plate colors shall be per NPS specifications or as otherwise specified on the drawings. Post and steel mounting plate assemblies shall receive a minimum of two top coat finishes.

Paint shall be applied smooth and clean with no oversprays, drips, paint runs, or bubbles. Paint shall be applied so that weep holes are clear and not plugged.

1. Sign posts and steel mounting plate shall be Matthews MP63855, NPS Black Bean Soup, Satin VOC Semi Gloss (or approved equal).

After final top coat paint applications all steel post and mounting plate surfaces shall receive a Matthews Satin Clear, MP281-228, Satin Polyurethane Finish (or approved equal). The finish shall be applied in strict accordance with the paint manufacturer’s specifications.

Router Depth 1/8"

45°

Threaded Rod and Drywall

Anchor

Chamfered Edge

Chamfered Edge

Epoxy Anchors

Use Triangle Pattern To Determine Mounting Hole Location

Sky: Not Routed

Mountain: Not Routed

Lake: Not Routed

Bison: Not Routed

Text: Routed

Snow: Routed

Foreground and Trees: Routed

PMS 553

MP 68247

PMS 1615

MP 62376

PMS 1605

MP 68246

White

NPS Arrowhead Routing Details

1 1/2" thick Western Red Cedar, dried to a minimum of 12% moisture content prior to fabrication. All non-routed areas remain at the surface level of the original material.

Match Colors:

Arrowhead Chamfer Detail

Arrowhead Mounting Detail Arrowhead Mounting Side Section

1/4" Chamfer

4-4.0G

Routed, Painted Western Red Cedar NPS Arrowhead Detail

D1.0F | FOMA

PARK

Fort Matanzas National Monument

PROJECT NUMBER

FOMA-2021-1185-MP

UNIT | AREA

DRAWING SCALE

Not to Scale

SIGN CATEGORY

Identity

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

01-09-2020

DESCRIPTION

PANEL:

Routed Wood

STRUCTURE:

Steel Posts

Double Post Ground Mount Assembly (Aluminum Post, Single-sided, Aluminum Panel)

D2.0 | FOMA

PARK

Fort Matanzas National Monument

PROJECT NUMBER

FOMA-2021-1185-MP

DRAWING SCALE

Not to Scale

SIGN CATEGORY

Identity Signage

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

07-18-2018

DESCRIPTION

PANEL:

0.125” Aluminum panel with intaglio process painted graphics

STRUCTURE:

6” x 8” Painted aluminum posts with caps

8" x 6" x 1/8" Thick Aluminum Posts with Welded 3/16" Thick Post Cap and Welded 13" x 11" x 1/2" Thick Steel Base Plate, Painted Black Bean Soup.

.125" Aluminum Panel to attach sign to structure. Contractor to determine and engineer design and must submit for approval. All mounting should be painted Black Bean Soup or North-wood Brown to blend with panel or posts as appropriate. Mounts must be hidden from sight when viewing sign from front. No bolts on sign face.

Contractor to determine and engineer footer, footer depth, rebar, footer substrate, concrete mix per local codes and to withstand local conditions.

11’-11”

13'-3"

3’-7”

3’

6’-7”

8" 6"

GL

Fort Matanzas National Monument

Front Elevation Side Elevation

Double Post Ground Mount Assembly (Aluminum Post, Single-sided Aluminum Panel)

AH Mtn and Outline AH sky AH Grass and Tree

PMS 1615 EC PMS 1605 C PMS 553 C

PMS 449 C

ID Overbar

Matthews Paint 63852

PMS 7531 C

ID Panel, Panel Back

Matthews Paint 63853 PMS Warm Gray 1 C

Typography

Matthews Paint 63854

Matthews Paint 62376 Matthews Paint 68246 Matthews Paint 68247

D2.0A | FOMA

PARK

Fort Matanzas National Monument

PROJECT NUMBER

FOMA-2021-1185-MP

DRAWING SCALE

1/2" = 1' - 0"

SIGN CATEGORY

Identity Signage

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

07-18-2018

DESCRIPTION

PANEL:

0.125” Aluminum panel with intaglio process painted graphics

STRUCTURE:

6” x 8” Painted aluminum posts with caps

143”

43" 27.5" Arrowhead

Panel Detail

ID Colors

Arrowhead Colors

Fort Matanzas National Monument

8" x 6" x 1/8" Thick Aluminum Post with Welded 3/16" Thick

Post Cap

13" x 11" Aluminum Base Plate Welded to Aluminum Post

Contractor to determine and engineer supports to ensure structural stability, all supports to be painted to match panel back.

1/2"

GL

Double Post Ground Mount Assembly with Aluminum Panel

Typical Construction

Post Color Black Bean Soup Matthews Paint

MP63855

PMS 439

Panel Back and Supports Northwood Brown Matthews Paint

MP63853

PMS 7531C

Double Post Ground Mount Assembly with Aluminum Panel

Top View, Scale: 1” = 1’-0”

Double Post Ground Mount Assembly (Aluminum Post, Single-sided, Aluminum Panel)

D2.0B | FOMA

PARK

Fort Matanzas National Monument

PROJECT NUMBER

FOMA-2021-1185-MP

DRAWING SCALE

1/2 scale

SIGN CATEGORY

Identity Signage

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

07-18-2018

DESCRIPTION

PANEL:

0.125” Aluminum panel with intaglio process painted graphics

STRUCTURE:

6” x 8” Painted aluminum posts with caps

8" x 6" x 1/8" Thick Aluminum Post with Welded 3/16" Thick Post Cap and Welded 13" x 11" x 1/2" Thick Aluminum Base Plate, Painted Black Bean Soup

8"

6"

Contractor to determine and engineer supports

0.125” Aluminum Panel with Intaglio Graphics, Back Painted Northwood Brown

See Base Plate Connection Detail Page D2.0C

Pan Depth to be Determined by Contractor

3/8" Diameter, Aluminum Drive Rivets Number and spacing to be determined by contractor

Double Post Ground Mount Assembly (Aluminum Post, Single-sided, Aluminum Panel)

D2.0C | FOMA

PARK

Fort Matanzas National Monument

PROJECT NUMBER

FOMA-2021-1185-MP

DRAWING SCALE

3" = 1' - 0"

SIGN CATEGORY

Identity Signage

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

07-18-2018

DESCRIPTION

PANEL:

0.125” Aluminum panel with intaglio process painted graphics

STRUCTURE:

6” x 8” Painted aluminum posts with caps

Intaglio Finish Material Overview and Fabrication Specifications

Intaglio finish - Aluminum edges are to be clean and free of burrs and rough edges. Panel edges are to be slightly rounded off to allow for primer and paint adhesion. All panels shall be cleaned, primed, and painted per manu-facturer’s specifications.

Panels shall be fabricated and finished with intaglio graphics. Panels shall be first sprayed with a primer and then a finish undercoat. A computer-cut vinyl application shall then be applied and the panel shall be over sprayed with the color top coat. After the top coat is fully dried the vinyl shall be removed to reveal the undercoat. A second or third paint application may be necessary depending on the number of panel colors. After the paint is fully dried, all vinyl and masks shall be peeled and the panel shall be sprayed with a final satin clear coat. Panels shall be sprayed with an anti-graffiti polyurethane coating

All paint colors shall match the specs provided in design intent drawings.

3/16

3/16

1/2 - 13 Stainless Steel Hex Nut

1/2" Stainless Steel Flat Washer

17" x 11" x 1/2" Thick Steel Base Plate Welded to Post

1/2-13 x 12" Long Stainless Steel L-Hook Anchor Bolt

1/2 - 13 Stainless Steel Acorn Nut

Base Plate Connection Detail

Double Post Ground Mount Assembly (Aluminum Post, Single-sided Aluminum or Wood Panel)

D3.0 | FOMA

PARK

Fort Matanzas National Monument

PROJECT NUMBER

FOMA-2021-1185-MP

DRAWING SCALE

1/2" = 1' - 0"

SIGN CATEGORY

Identity Signage

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

07-18-2018

DESCRIPTION

PANEL:

0.125” Aluminum panel with intaglio process painted graphics.

STRUCTURE:

3” x 3” Painted aluminum posts with caps

PMS 439

MP63855

3" x 3" x 1/8" Thick Aluminum Posts with Welded 3/16" Thick Post Cap and Welded 7" x 7" x 1/4" Thick Steel Base Plate, Painted Black Bean Soup.

.125" galvanized steel frame to attach sign to structure. Contractor to determine and engineer design and must submit for approval. All mounting should be painted Black Bean Soup and hidden from sight when viewing sign from front. No bolts on sign face.

Sign contractor to determine and engineer footer, footer depth, rebar, footer substrate, concrete mix per local codes and to withstand local conditions.

4’

4’-6”

15”

32”

3’ -11”

3" 3"

GL

Front Elevation Side Elevation

Visitor Center

PMS 449 C

ID Overbar

Matthews Paint 63852

PMS 7531 C

ID Panel

Matthews Paint 63853 PMS Warm Gray 1 C

Typography

Matthews Paint 63854

D3.0A | FOMA

PARK

Fort Matanzas National Monument

PROJECT NUMBER

FOMA-2021-1185-MP

DRAWING SCALE

1" = 1' - 0"

SIGN CATEGORY

Identity Signage

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

07-18-2018

DESCRIPTION

PANEL:

0.125” Aluminum panel with intaglio process painted graphics

STRUCTURE:

3” x 3” Painted aluminum posts with caps

48”

15"

Panel Detail

Visitor Center

0.125” Aluminum Panel with Intaglio Graphics, Back Painted to match Northwood Brown Matthews Paint 63853

3" x 3" x 1/8" Thick Aluminum Post with Welded 3/16" Thick

Post Cap

7" x 7" Aluminum Base Plate Welded to Aluminum Post

Posts painted to match:

1/2"

GL

Double Post Ground Mount Assembly with Aluminum Panel

Typical Construction

Black Bean Soup Matthews Paint

MP63855

Double Post Ground Mount Assembly with Aluminum Panel

Typical Plan View

Double Post Ground Mount Assembly (Aluminum Post, Single-sided Aluminum Panel)

D3.0B | FOMA

PARK

Fort Matanzas National Monument

PROJECT NUMBER

FOMA-2021-1185-MP

DRAWING SCALE

SIGN CATEGORY

Identity Signage

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

07-18-2018

DESCRIPTION

PANEL:

0.125” Aluminum panel with intaglio process painted graphics

STRUCTURE:

3” x 3” Painted aluminum posts with caps

3/8" Diameter, Aluminum Drive Rivets Number and spacing to be determined by contractor

See Base Plate Connection Detail Page D3.0C

Pan Depth to be Determined by Contractor

3" x 3" x 1/8" Thick Aluminum Post with Welded 3/16" Thick Post Cap and Welded 7" x 7" x 1/2" Thick Aluminum Base Plate, Painted Black Bean Soup

3"

3"

D3.0C | FOMA

PARK

Fort Matanzas National Monument

PROJECT NUMBER

FOMA-2021-1185-MP

DRAWING SCALE

3" = 1' - 0"

SIGN CATEGORY

Identity Signage

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

07-18-2018

DESCRIPTION

PANEL:

0.125” Aluminum panel with intaglio process painted graphics

STRUCTURE:

3” x3” Painted aluminum posts with caps

Intaglio Finish for Aluminum Panel Material Overview and Fabrication Specifications

Intaglio finish - Aluminum edges are to be clean and free of burrs and rough edges. Panel edges are to be slightly rounded off to allow for primer and paint adhesion. All panels shall be cleaned, primed, and painted per manu-facturer’s specifications.

Panels shall be fabricated and finished with intaglio graphics. Panels shall be first sprayed with a primer and then a finish undercoat. A computer-cut vinyl application shall then be applied and the panel shall be over sprayed with the color top coat. After the top coat is fully dried the vinyl shall be removed to reveal the undercoat. A second or third paint application may be necessary depending on the number of panel colors. After the paint is fully dried, all vinyl and masks shall be peeled and the panel shall be sprayed with a final satin clear coat. Panels shall be sprayed with an anti-graffiti polyurethane coating

All paint colors shall match the specs provided in design intent drawings.

3/16

3/16

1/2 - 13 Stainless Steel Hex Nut

1/2" Stainless Steel Flat Washer

17" x 11" x 1/2" Thick Steel Base Plate Welded to Post

1/2-13 x 12" Long Stainless Steel L-Hook Anchor Bolt

1/2 - 13 Stainless Steel Acorn Nut

Base Plate Connection Detail

D4.0 | FOMA

PARK

Fort Matanzas National Monument

PROJECT NUMBER

FOMA-2021-1185-MP

DRAWING SCALE

1/2" = 1' - 0"

SIGN CATEGORY

Identity Signage

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

07-18-2018

DESCRIPTION

PANEL:

0.080” Direct Image or Image-transfer Aluminum Panel as indicated on page D5.0

STRUCTURE:

Galvanized Steel Trail Side

Trail Side VIS Exhibit Base

GL

.250 Breakformed Galvanized Steel Base.

0.080” Aluminum Panel with Direct-image or Image-transfer Graphics according to panel specifications on page D5.0.

C6 M7 Y9 K11 C0 M96 Y100 K0C11 M74 Y100 K50 C0 M32 Y100 K0 PMS Warm Gray 2 PMS 485PMS 1615 PMS 124

MP68248 MP68240 MP67663

PMS 449

River Rock MP63852 NPS 1615 Brown

MP62376

C32 M37 Y73 K82

PMS 7531

Northwood Brown

MP63853

C16 M28 Y36 K51

Do Not Climb Tree

Trail Side VIS Exhibit Base (continued)

D4.0A | FOMA

PARK

Fort Matanzas National Monument

PROJECT NUMBER

FOMA-2021-1185-MP

DRAWING SCALE

3/4" = 1' - 0"

SIGN CATEGORY

Identity Signage

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

07-18-2018

DESCRIPTION

PANEL:

Image-transfer Aluminum Panel as indicated on page D5.0

STRUCTURE:

Galvanized Steel Trail Side

6"

5-7/8"

3/ 4"

5/8"5/8" eq eq

Pa n el H ei g h t:

2" o r

3/ 4"

Radius 1/8"

Radius Panel Edge

Optional 1/4" Holes for 4-Corner Panel Attachment

Breakform Bend

1/4" Hole to Accept 3/8" x 1/4" Barrel Diameter 18-8

Stainless Steel Torx Pin In Head Barrel with 1/4", 10-24, 18-8 Stainless Steel, Torx Pin

In Head Machine Screw

Line of Panel

Trailside Base

2-TS - 01 Panel Attachment Detail

1-TS - 02

1-TS - 03

1-TS - 01 Trail Side Front and Side Elevation

45°

2-TS - 01

GL

D4.0B | FOMA

Fort Matanzas National Monument

PROJECT NUMBER

FOMA-2021-1185-MP

DRAWING SCALE

3/4" = 1' - 0"

SIGN CATEGORY

Identity Signage

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

07-18-2018

DESCRIPTION

PANEL:

Image-transfer Aluminum Panel as indicated on page D5.0

STRUCTURE:

Galvanized Steel Trail Side

Trail Side VIS Exhibit Base (continued)

1-TS - 02 Trail Side Side Elevation

3/8" x 1/4" Barrel Diameter 18-8 Stainless Steel Torx Pin In Head Barrel with 1/4", 10-24, 18-8 Stainless Steel, Torx Pin

In Head Machine Screw

.250 Breakformed Galvanized Steel

.125 Graphic Panel

6"

Panel Height: 6", 12" or 18"

1/16"

1/16"

3/4"

3/4"

2-TS - 02 Connection Detail

45°

C6 M7 Y9 K11 C0 M96 Y100 K0

C11 M74 Y100 K50

C0 M32 Y100 K0 PMS Warm Gray 2 PMS 485

PMS 1615

PMS 124

MP68248 MP68240 MP67663

PMS 449

River Rock MP63852 NPS 1615 Brown MP62376

White

Rich Black

C32 M37 Y73 K82

Overbar Panel Background

Panel Background

C15 M14 Y17 K0 PMS Warm Gray 1

MP68248

Type

Panel BackgroundProbibition

Overbar, Panel Background, Arrowhead

Type, Symbols, Arrowhead

Overbar, Panel Background, Type, Symbols

PMS 7531

Northwood Brown

MP63853

C16 M28 Y36 K51

D5.0 | FOMA

PARK

Fort Matanzas National Monument

PROJECT NUMBER

FOMA-2021-1185-MP

DRAWING SCALE

1/2" = 1' - 0"

SIGN CATEGORY

VIS

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

02-13-2020

DESCRIPTION

PANEL:

0.080” Aluminum with Direct-image or Image-transfer Graphics

STRUCTURE:

Post

No Fires or Grilling

Notice

Panels shall be high-resolution capable of single and or double-sided. Panels are direct imaged or image transfered using UV resistant pigments on 0.080” thick alumi-num, finished with a clear baked on VOC free powder coat, and 3/8” radius corners.

Panels shall have the capability to display a matte surface.

Vinyl wrapped aluminum panels are not acceptable.

Panel backs must be painted or otherwise treated to match PMS 1615 UNLESS the panel is to be installed into a frame. All panels will be labeled with their correspond-ing drawing number.

Panels to be installed into frames to be trimmed to 1/8” below nominal dimensions specified in drawings.

Park to provide posts and mounting hardware unless otherwise specified.

Direct Image Powder Coated Aluminum Panel Detail

3/8” Radius Corners

Aluminum edges are to be clean and free of burrs and rough edges

Direct image or Image Transfered, UV-Resistant Pigments, finished with a Clear, Baked-On VOC-Free Powder Coat

Reverse Side to be Painted PMS 1615 Brown or equivalent

3/8” Mounting Holes as shown in drawings.

Do Not Climb Tree

DANGER

Oysters are very sharp and can cause serious cuts.

Restrooms

Staff Only

PMS 7531 White or PMS Warm Gray 1

TypographyPanel

Old Prairie

MP63854

Northwood Brown

MP63853

C3 M3 Y6 K7C16 M28 Y36 K51

D5.A | FOMA

PARK

Fort Matanzas National Monument

PROJECT NUMBER

FOMA-2021-1185-MP

DRAWING SCALE

1/2" = 1' - 0"

SIGN CATEGORY

VIS

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

02-13-2020

DESCRIPTION

PANEL:

0.080” Aluminum with Direct-image or Image-transfer Graphics

STRUCTURE:

Post

Stand Mount Direct-image Powder-Coated Aluminum Panel Side Elevation

GL

Aluminum edges are to be clean and free of burrs and rough edges.

Corners and edges should be rounded to prevent paint/surface chipping.

Angle to be determined by contractor.

Must be ≥70˚

Entire structure painted to match PMS 7531 EC

Thick walls on all sides protected the gunpowder during bombardment.

Powder Magazine Alacén para pólvora

Water Cistern

3"2"

2-UP

GL

D6.0 | FOMA

PARK

Fort Matanzas National Monument

PROJECT NUMBER

FOMA-2021-1185-MP

DRAWING SCALE

1/2" = 1' - 0"

SIGN CATEGORY

VIS

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

02-13-2020

DESCRIPTION

PANEL:

0.080” Aluminum with Direct-image or Image-transfer Graphics

STRUCTURE:

VIS Upright Galvanized Steel

Upright Series, Single-Sided Galvanized Steel Fabrication

General Note:

All breakformed steel and aluminum frame edges shall be eased to prevent sharp edges and allow paint adherence.

1-UP Upright Elevation

Scale: 1/2" = 1' -0"

5/16"

1/4"-20 x 3/8", 18-8 Stainless Steel, Flat Head, Phillips Machine Screw Note: Top of Frame is Connected by Screws and is Removable

Post Cap Welded to Top of Post

1/4"-20, 316 Stainless Steel Nut Welded to Steel Angle

1-3/4"

1/4" Diameter, 18-8 Stainless Steel High Strength, Wide

Grip, Dome Style Blind Rivet Note: Refer to Rivet Chart for Quantity per Frame

2-UP Side Section Cut

Scale: 1/2 Actual Size

3-UP

.125" Galvanized Steel Core Panel Welded to Angle

.090 to .125 Graphic Panel

1" x 1" x 1/8" Breakformed Steel Angle

1-3/4" x 3/4" x 1/8" Breakformed Galvanized Steel Angle

1/8" Drilled Weep Hole Note: See Weep Hole Chart

"4 /3

"4 /3

2" x 3" x 1/8" Tubular Galvanized Steel Post

1" x 1" x 1/8" Breakformed Galvanized Steel Angle

1-3/4" x 3/4" x 1/8" Breakformed Galvanized Steel Angle

Upright Series, Single-Sided Galvanized Steel Fabrication

D6.0A | FOMA

PARK

Fort Matanzas National Monument

PROJECT NUMBER

FOMA-2021-1185-MP

DRAWING SCALE

SIGN CATEGORY

VIS

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

02-13-2020

DESCRIPTION

PANEL:

0.080” Aluminum with Direct-image or Image-transfer Graphics

STRUCTURE:

VIS Upright Galvanized Steel

4-UP

3-UP Frame Front Elevation

Scale: 1/2 Actual Size

1/ 8"

U n d er cu t

Pa n el

"4/ 3

"61/ 1

3/4"

1/16"

Line Of 1/8" Steel Frame

Post Cap

Line Of 1/8" Undercut Graphic Panel

2" x 2" x 1/8" Tubular Steel Posts

N o m in al D im en si o n

/2

4-UP Frame Top Section

Scale: 1/2 Actual Size

1/8" Undercut Panel

"61/5

"4/ 3- 1

1/8" Steel Core Panel Welded to Steel Angle

.080 to .125 Graphic Panel

1/16" Gap For Panel Expansion

1" x 1" x 1/8" Breakformed Steel Angle

2" x 3/4" x 1/8" Breakformed Steel Angle

2" x 2" x 1/8" Tubular Steel Posts

See Weld Chart

1" x 1" x 1/8" Breakformed Galvanized Steel Angle

1/4" Diameter, 18-8 Stainless Steel High Strength, Wide Grip, Dome Style Blind Rivet Note: Refer to Rivet Chart for Quantity per Frame

1/16" Gap for Panel Expansion

2" x 3/4" x 1/8" Breakformed Galvanized Steel Angle

Upright Series, Single-Sided Galvanized Steel Fabrication

D6.0B | FOMA

PARK

Fort Matanzas National Monument

PROJECT NUMBER

FOMA-2021-1185-MP

DRAWING SCALE

SIGN CATEGORY

VIS

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

02-13-2020

DESCRIPTION

PANEL:

0.080” Aluminum with Direct-image or Image-transfer Graphics

STRUCTURE:

VIS Upright Galvanized Steel

GL

5-UP Upright Direct Embed with Stabilizer Fins

Scale: 1.5" = 1'-0"

Based on Sign Size

M in im u m

12"

Optional 6" x 6" Plate

Base Post and Fin Coated with Base Metal Primer Up to 2" Above Grade

3" Gravel Layer

Backfill

1/8" Thick Stabilizer Fin Bolted or Welded to Base Post

2" M ax

10"

D7.0 | FOMA

Fort Matanzas National Monument

PROJECT NUMBER

FOMA-2021-1185-MP

DRAWING SCALE

SIGN CATEGORY

VIS

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

02-13-2020

DESCRIPTION

PANEL:

0.080” Aluminum with Direct-image or Image-transfer Graphics

STRUCTURE:

VIS Double-Sided Upright, Galvanized Steel

Upright Series, Double-Sided Galvanized Steel Fabrication

3"2"

2-UP

General Note:

All breakformed steel and aluminum frame edges shall be eased to prevent sharp edges and allow paint adherence.

1-UP Upright Elevation

Scale: 1/2" = 1' -0"

5/16"

2"

1/4" Diameter, 18-8 Stainless Steel High Strength, Wide

Grip, Dome Style Blind Rivet Note: Refer to Rivet Chart for Quantity per Frame

2-UP Side Section Cut

Scale: 1/2 Actual Size

3-UP

"4 /3

"4 /3

.125" Galvanized Steel Core Panel Welded to C-Channel .090 to .125 Graphic Panel

2" x 3/4" x 1/8" Breakformed Galvanized Steel C-Channel

1" x 1" x 1/8" Breakformed Galvanized Steel C-Channel

2" x 3/4" x 1/8" Breakformed Steel C-Channel

1" x 1" x 1/8" Breakformed Steel C-Channel

1/8" Drilled Weep Holes Note: See Weep Hole Chart

2" x 2" x 1/8" Tubular Galvanized Steel Post

1/4"-20 x 1/2", 18-8 Stainless Steel, Flat Head, Phillips Machine Screw Note: Top of Frame is Connected by Screws and is Removable

1/4"-20 x 3/8", 18-8 Stainless Steel, Flat Head, Phillips Machine Screw

1/4"-20, 316 Stainless Steel Nut Welded to Steel C-Channel

1/4"-20, 316 Stainless Steel Nut Welded to Steel C-Channel

1/4"-20 x 3/8", 18-8 Stainless Steel, Flat Head, Phillips Machine Screw

1/4"-20, 316 Stainless Steel Nut Welded to Steel C-Channel

.090 to .125 Graphic Panel

.125" Steel Core Panel

D7.0A | FOMA

Fort Matanzas National Monument

PROJECT NUMBER

FOMA-2021-1185-MP

DRAWING SCALE

SIGN CATEGORY

VIS

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

02-13-2020

DESCRIPTION

PANEL:

0.080” Aluminum with Direct-image or Image-transfer Graphics

STRUCTURE:

VIS Double-Sided Upright, Galvanized Steel

Upright Series, Double-Sided Galvanized Steel Fabrication

Post Cap3/4"

3-UP - 12 Frame Front Elevation

Scale: 1/2 Actual Size

1/8" Undercut Panel

"61/5

4-UP Frame Top Section

Scale: 1/2 Actual Size

1" x 1" x 1/8" Breakformed Galvanized Steel C-Channel

1/4" Diameter, 18-8 Stainless Steel High Strength, Wide Grip, Dome Style Blind Rivet Note: Refer to Rivet Chart for Quantity per Frame

1/16" Gap for Panel Expansion

2" x 3/4" x 1/8" Breakformed Galvanized Steel C-Channel

1/8" Steel Core Panel

.080 to .125 Graphic Panel

1/8" Galvanized Steel Core Panel Welded to Steel C-Channel

.090 to .125 Graphic Panel

1/16" Gap For Panel Expansion

1" x 1" x 1/8" Breakformed Galvanized Steel C-Channel

2" x 3/4" x 1/8" Breakformed Galvanized Steel C-Channel

2" x 2" x 1/8" Tubular Galvanized Steel Posts

1/4"-20 x 3/8", 18-8 Stainless Steel, Flat Head, Phillips Machine Screw

1/4"-20, 316 Stainless Steel Nut Welded to Steel C-Channel

1/4"-20, 316 Stainless Steel Nut Welded to Steel C-Channel

1/4"-20 x 3/8", 18-8 Stainless Steel, Flat Head, Phillips Machine Screw

See Weld Chart

"2

1/ 8"

U n d er cu t

Pa n el

"4/ 3

"61/ 1

1/16"

4-UP

Line Of 1/8" Steel Frame

Line Of 1/8" Undercut Graphic Panel

2" x 2" x 1/8" Tubular Steel Posts

N o m in al D im en si o n

/2

D7.0B | FOMA

Fort Matanzas National Monument

PROJECT NUMBER

FOMA-2021-1185-MP

DRAWING SCALE

SIGN CATEGORY

VIS

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

02-13-2020

DESCRIPTION

PANEL:

0.080” Aluminum with Direct-image or Image-transfer Graphics

STRUCTURE:

VIS Double-Sided Upright, Galvanized Steel

GL

5-UP Upright Direct Embed with Stabilizer Fins

Scale: 1.5" = 1'-0"

Based on Sign Size

M in im u m

12"

Optional 6" x 6" Plate

Base Post and Fin Coated with Base Metal Primer Up to 2" Above Grade

3" Gravel Layer

Backfill

1/8" Thick Stabilizer Fin Bolted or Welded to Base Post

2" M ax

10"

Upright Series, Double-Sided Galvanized Steel Fabrication

D8.0 | FOMA

Fort Matanzas National Monument

PROJECT NUMBER

FOMA-2021-1185-MP

UNIT | AREA

DRAWING SCALE

As Indicated

SIGN CATEGORY

Identity/VIS

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

06-21-2020

DESCRIPTION

PANEL:

Exterior Grade material/finish to be specified by contractor to meet requirements indicated

STRUCTURE:

Wall Mount using VHB tape

ENLARGE FOR FULL SCALE

Contractor to specify materials and fabrication techniques. Vinyl wrap unacceptable. Material must be suitable for tactile signs in an outdoor environment, able to withstand repeated use, and able to be cleaned/sanitized.

Sign surface to be smooth, matte finish, fingerprint and smudge resistant. Contractor to provide instructions for cleaning.

Signs to be frameless, wall mount as specified in drawings (VHB tape or mounts designed by contractor). Panels thickness must be adequate to ensure panels are self-supporting and do not bend or warp.

Contractor to supply a minimum 2 year warranty against wear and fading.

Exterior Tactile Sign - Raised Characters, Braille

Figure A - Panel Elements

Overbar not raised

All Characters, Lines,and Arrows to be Raised, Prismatic as Detailed in Figure B

Contractor to Supply UEB Braille Compliant With ABAAS Section 703 Signs in Spaces Indicated, Ensuring 3/8” Clear Space Around all Sides. Braille to Match Panel Background Color.

Shaded Bounding Boxes do not Print.

3/8” Radius Corners

Panel and Overbar colors to wrap around panel edges to panel back.

Red and Black areas of Symbols Raised, NOT Prismatic.

White Symbol Background Flush with Panel Surface.

VISITOR CENTER

9:00 AM – 4:30 PM

NO SMOKING

NO FOOD OR DRINK

NO PETS

D8.0A | FOMA

Fort Matanzas National Monument

PROJECT NUMBER

FOMA-2021-1185-MP

UNIT | AREA

DRAWING SCALE

As Indicated

SIGN CATEGORY

Identity/VIS

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

06-21-2020

DESCRIPTION

PANEL:

Exterior Grade material/finish to be specified by contractor to meet requirements indicated

STRUCTURE:

Wall Mount using VHB tape

ENLARGE FOR FULL SCALE

Exterior Tactile Sign - Raised Characters, Braille (continued)

Base of Tactile Elements to be the Thickness Shown in Design Intent Drawings

Tops of Tactile Elements to be Flat with Edges Crisp but Not Sharp

Tactile Element

Panel Surface

Angle must be < 85˚. Contractor to Specify Angle to Produce Prismatic Shape that can be Easily and Comfortably Traced with a Finger

Tactile Elements to be Between 1/16” and 1/8”.

Contractor to Specify.

Figure B - Tactile Elements

Figure C - Tactile Sign Color Swatches

White

Symbols

Rich Black

Symbols

MP68240

PMS 485

Prohibition Symbols

PMS 7531

Panel Background and Braille

Northwood Brown

MP63853

PMS 449

ID Overbar

River Rock

MP 63852

PMS Warm Gray 1

Typography

Old Prairie

MP63854

MG1.0 | FOMA

FORT MATANZAS

NATIONAL MONUMENT

PROJECT NUMBER

UNIT | AREA

DRAWING SCALE

Not to Scale

SIGN CATEGORY

Motorist Guidance

REVISION | DATE

DRAWING NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

02-13-2020

DESCRIPTION

PANEL:

STRUCTURE:

ENLARGE FOR FULL SCALE

QTY:

QTY:

2-D1.0 NPS Standard Extruded Aluminum Sign Back Elevation

1-D1.0 NPS Standard Extruded Aluminum Sign Fabrication

With Metal Posts

Extruded Aluminum Panels with FHWA Recreation Brown Type III/IV Very High Intensity Full Sheet Wrap, Back Painted to Match NPS Brown, Matthews Paint MP63848

Edge Strip Painted to Match NPS Brown,…