A06_Attachment_A2_-_CASA-2021-1185-MP-03_Fabrication_Details.pdf

Fabrication Details - Sign Master Plan

Castillo de San Marcos National Monument

July 2021

CASA-2021-1185-MP

Office of NPS Identity Harpers Ferry Center

Interpretive Design Center Harpers Ferry, WV 25425

Attachment A2

21"

11’ 4”

0.4”

3/8” Thick Anodized Aluminum Pin Mount Lettering and vertical separator bar to match as closely as possible Black Bean Soup/PMS 439, Paper Installation Template (installing into stucco).

Aluminum letters shall be jet cut or CNC routed, cut from actual typographic patterns. Cut edges to be smooth and free of burrs with letter edges smooth and free of defects.

All components to be corrosion resistant.

Metal to be treated and sealed as appropriate for outdoor use.

Contractor to stud weld aluminum rods to the back of the dimensional letters OR letters are to be drilled and tapped to receive threaded studs for mounting.

Contractor shall determine details to install letters flush against the stucco sign facade.

Park Identity Sign - Anodized Aluminum Pin Mount Lettering with Routed, Painted Arrowhead Scale: 1/2” = 1’-0”

1.1A - Letter Back Detail Not to Scale

1.1A - Letter Side Section Not to Scale

Threaded Rod or Stud Welded Post

3/8”

Arrowhead Fabrication Information Page X

D1.0 | CASA

PARK

Castillo de San Marcos National Monument

PROJECT NUMBER

CASA-2019-1185-MP

UNIT | AREA

DRAWING SCALE

As Indicated

SIGN CATEGORY

Identity

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

05-23-2021

DESCRIPTION

PANEL:

Anodized Pin Mount Aluminum Lettering and Routed Wood Arrowhead

STRUCTURE:

Existing stucco wall

ENLARGE FOR FULL SCALE

Anodized Aluminum Pin Mount Lettering

6" 3"

2"

Lettering Color

Lettering and Vertical Separator Bar, Satin Finished, Anodized

Black Bean Soup

MP63855

PMS 439

Panel Detail

National Monument

National Park Service U.S. Department of the Interior

144"

41"

1/2"Routed Dado Painted Overbar Color

Wood Panel and Mounts

D2.0 | CASA

PARK

Castillo de San Marcos National Monument

PROJECT NUMBER

CASA-2020-1185

UNIT | AREA

DRAWING SCALE

Not to Scale

SIGN CATEGORY

Identity

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

06-21-2021

DESCRIPTION

PANEL:

Routed Wood

STRUCTURE:

Steel Posts

ENLARGE FOR FULL SCALE

Routed, painted single-sided Western Red Cedar sign panel with horizontal dado and mounts for installation onto existing concrete pillars. (This is a replacement panel for an existing sign.)

Contractor to determine and engineer mounting structure. All mounts to be painted to match Matthews Paint Northwood Brown (MP 63853).

ID Colors

Match Colors to Matthews Paint or Equivalent Pantone:

PMS 449 C

ID Overbar

Matthews Paint 63852

PMS 7531 C

ID Panel, Panel Back, Mounts

Matthews Paint 63853 PMS Warm Gray 1 C

Typography

Matthews Paint 63854

PMS 7531 C

ID Panel, Panel Back, Mounts

Matthews Paint 63853

Panel Mount to Existing Base

Typical Construction

Wood Panel and Mounts (continued)

D2.0A | CASA

PARK

Castillo de San Marcos National Monument

PROJECT NUMBER

CASA-2020-1185

UNIT | AREA

DRAWING SCALE

1/2” = 1’-0”

SIGN CATEGORY

Identity

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

06-21-2021

DESCRIPTION

PANEL:

Routed Wood

STRUCTURE:

Steel Posts

ENLARGE FOR FULL SCALE

Sample Frame Drawing.

Contractor to determine and engineer mounting structure to mount panel to existing concrete pylon baseExisting

Concrete Pylon

Front Elevation Scale: 1/4” = 1’-0”

Wood Panel and Mounts (continued)

Routing Details

D2.0B | CASA

PARK

Castillo de San Marcos National Monument

PROJECT NUMBER

CASA-2020-1185

UNIT | AREA

DRAWING SCALE

Not to Scale

SIGN CATEGORY

Identity

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

06-21-2021

DESCRIPTION

PANEL:

Routed Wood

STRUCTURE:

Steel Posts

ENLARGE FOR FULL SCALE

Wood Panel

1/

2"

3/ 8"

Routed Frutiger Typography Section Cut

Wood Panel

1/8" 1/8"

45° 45°

1/

2"

Routed NPS Rawlinson Typography Section Cut

Double Post Ground Mount Assembly (Steel Post, Double-sided, Wood Panels) (continued)

D2.0C | CASA

PARK

Castillo de San Marcos National Monument

PROJECT NUMBER

CASA-2020-1185

UNIT | AREA

DRAWING SCALE

Not to Scale

SIGN CATEGORY

Identity

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

06-21-2021

DESCRIPTION

PANEL:

Routed Wood

STRUCTURE:

Steel Posts

ENLARGE FOR FULL SCALE

100%

Material Overview and Fabrication Specifications

Wood Western Red Cedar for NPS Park Identity Signs:

WRC for NPS Park Identity signs shall be laminated clear heart, kiln-dried vertical grain with a maximum moisture content not to exceed 12%. Cedar shall be selected per grading rules of the Western Red Cedar Lumber Association. Components of all panels including end caps shall be fabricated from the same grade.

Panel Size:

Sign panel shall be fabricated based on dimensions and format specified in the Sign Drawing Package. Panel sizes, specifications, dimensions, typography, color, and proportions shall not be altered.

Panel Assembly:

Panels shall be constructed using clear heart, vertical grain, kiln-dried wood through, glued up one board thick using 2" nominal size dimensional lumber (2" x 6", 2" x 8", 2" x 10").

Panels shall be glued using a phenolic resorcinol moisture resistant adhesive with all surface joints covered. Panels shall be clamped and cured for a minimum of 24 hours or per the manufacturers specifications. Panel fabrication shall occur in air temperatures between 70 and 90 degrees Fahrenheit during drying, adhesive application, and curing.

After curing the panel vertical edges shall be finished with a 2" x 2" vertical end strip, faced glued and reinforced with 3", No 12 stainless steel Phillips flathead screws placed 8" on center. Screw heads shall be countersunk to a depth of 3/8" and filled with glue-in wood plugs.

After end strips have cured the panels shall be machine planed to a finish thickness of 1-1/2". All surfaces shall be finish sanded smooth and face and back edges shall rounded to a radius of 1/8".

Panels shall not be finished with hand planes, hand-held belt, orbital, or vibrating sanders.

Graphic Layout:

Graphic layout of panels shall be as shown on the attached drawings. Graphics to be accurately reproduced from plotted outline template or directly from computer to router based on full size digital vector art. Contractor shall use an accurate grid to ensure layout is aligned vertically and horizontally.

Typography shall be NPS Rawlinson Heavy and Frutiger Bold as shown on attached drawings. Typography shall not be altered, manipulated, or changed. Substitute fonts shall not be used.

NPS Rawlinson Heavy shall be Machine-routed unless otherwise specified with a 90 degree “V" router bit with a 1/8" vertical, flat sidewall inset. Routed letters shall conform to the same size artwork. Routing depth shall be uniform. Corners of type smaller than 3" cap height shall have a radius no greater than 0.0625.

Type larger than 3" cap height shall have a corner radius no greater than 0.125".

Frutiger Bold typography shall be Machine-routed unless otherwise specified using a vertical-sided, flat-bottom router bit.

Routing depth to be 0.375".

A 0.250" deep dado shall be routed in the panel between the main panel and the overbar. Dado height shall be determined based on cap height of main typography (0.0833 x cap height - .25" for 3", 0.333" for 4", .50 for 6"). Dado shall be routed in to the main panel field with the overbar being full height. Routed dado shall be painted same color as the overbar.

NPS Alternate Panel layouts receive a vertical dado in addition to the horizontal dado. Vertical dados shall be routed to a depth of 0.250". Vertical dado width shall be based on the cap height of main typography (0.0833 x cap height - .25" for 3", 0.333" for 4", .50 for 6"). Vertical dados shall be painted as specified below.

Panels receiving an NPS Arrowhead shall be Machine-routed to a depth of 0.125" using a vertical-sided, flat-bottom router bit in Overbar section of panel for NPS Standard Panel layouts or Main Sign Panel for NPS Alternate layouts. Arrowhead shiloutte routed in the sign panel shall be oversized by 1/8" to accommodate inset NPS Arrowhead.

All routed type, dados, and insets shall be sanded smooth and clean. All edges shall be free of burrs and all edges eased prior to application of primer coats and paint.

Paint:

Prior to painting panels shall be Machine drum sanded. Panels shall not be finished with hand planes, hand-held belt, orbital, or vibrating sanders. All sawdust and sanding residue shall be removed from the sign. Panel shall be properly cleaned per paint manufacturer’s instructions.

Panel surfaces shall be wiped clean using a Matthews (or approved equal) Speed Prep Cleaner formulated for use on wood.

All panel surfaces shall be completely dry prior to primer applica-tion.

Panels shall be sprayed using a VOC compliant, Mathews White Epoxy Primer (or approved equal) on all surfaces. Panels shall receive a minimum of two primer coats prior to top coat finishes.

Primer coats shall be applied in strict accordance with the paint manufacturer’s specifications.

Final top coat colors shall be a Matthews Satin VOC, Semi Gloss

Wood Panel and Mounts (continued)

D2.0D | CASA

PARK

Castillo de San Marcos National Monument

PROJECT NUMBER

CASA-2020-1185

UNIT | AREA

DRAWING SCALE

Not to Scale

SIGN CATEGORY

Identity

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

06-21-2021

DESCRIPTION

PANEL:

Routed Wood

STRUCTURE:

Steel Posts

ENLARGE FOR FULL SCALE

finish applied per the graphic layouts. Panel colors shall be per NPS specifications.

1. Panel Overbar and dado between panel face and overbar shall be Matthews MP63852, NPS River Rock, Satin VOC Semi Gloss (or approved equal). The Overbar color shall wrap to panel sides;

2. Main Panel Face, sides, and panel back shall be Matthews MP 63853, Northwood Brown, Satin VOC Semi Gloss (or approved equal);

3. Panel Typography and Vertical Dado on NPS Alternate Panel layouts shall be Matthews M P63854, NPS Old Prairie, Satin VOC Semi Gloss (or approved equal). Edges between type, dados, and flat panel sections shall be clean and sharp. Ragged edges and transitions, drips, and oversprays and not acceptable.

After a top coat paint application all post and frame surfaces shall receive a Matthews (or approved equal) Satin Clear, MP281-228, Satin Polyurethane Finish. The finish shall be applied in strict accordance with the paint manufacturer’s specifications.

Steel Steel Sign Structure: Wood panels shall be attached to a steel post and steel mounting plate sytem. Sign assemblies shall be fabricat-ed with A-36, A-500B, or A-847 tubular steel upright posts (4" x 6" x 1/4" wall, 8" x 6" x 1/4" wall, or as otherwise specified)

Steel posts shall be mounted per the specified drawings and can include direct embedment of posts or baseplate mounting.

Steel post length shall be cut per specified drawings. Posts shall be cut to allow flush alignment of post and sign panel.

Steel mounting plate shall be fabricated with A-36, A-500B, or A-847, x 1/4" steel plate. Internal weld edges shall be welded clean and ground smooth.

Paint:

Prior to painting all steel components shall be sanded, sand blasted, or bead blasted to remove all oils, burrs, and rust. Rust shall be completely removed from all surfaces, edges, and corners.

Exposed welds shall be ground clean and smooth. Cleaning of steel surfaces shall be in strict accordance with paint manufactur-er’s specifications.

Prior to primer application all steel components shall be cleaned with a Matthews (or approved equal) Speed Prep Cleaner formulated for use on steel. All surfaces shall be completely dry prior to primer application.

After cleaning, all steel components shall be sprayed using a VOC compliant, Mathews White Epoxy Primer (or approved equal) on all surfaces. Components shall receive a minimum of two primer coats prior to top coat finishes. Primer coats shall be applied in strict accordance with the paint manufacturer’s specifications.

Final top coat colors shall be a Matthews Satin VOC, Semi Gloss finish (or approved equal). Post and steel mounting plate colors shall be per NPS specifications or as otherwise specified on the drawings. Post and steel mounting plate assemblies shall receive a minimum of two top coat finishes.

Paint shall be applied smooth and clean with no oversprays, drips, paint runs, or bubbles. Paint shall be applied so that weep holes are clear and not plugged.

1. Sign posts and steel mounting plate shall be Matthews MP63855, NPS Black Bean Soup, Satin VOC Semi Gloss (or approved equal).

After final top coat paint applications all steel post and mounting plate surfaces shall receive a Matthews Satin Clear, MP281-228, Satin Polyurethane Finish (or approved equal). The finish shall be applied in strict accordance with the paint manufacturer’s specifications.

Router Depth 1/8"

45°

Threaded Rod and Drywall

Anchor

Chamfered Edge

Chamfered Edge

Epoxy Anchors

Use Triangle Pattern To Determine Mounting Hole Location

Sky: Not Routed

Mountain: Not Routed

Lake: Not Routed

Bison: Not Routed

Text: Routed

Snow: Routed

Foreground and Trees: Routed

PMS 553

MP 68247

PMS 1615

MP 62376

PMS 1605

MP 68246

White

NPS Arrowhead Routing Details

1 1/2" thick Western Red Cedar, dried to a minimum of 12% moisture content prior to fabrication. All non-routed areas remain at the surface level of the original material.

Match Colors:

Arrowhead Chamfer Detail

Arrowhead Mounting Detail Arrowhead Mounting Side Section

1/4" Chamfer

4-4.0G

Routed, Painted Western Red Cedar NPS Arrowhead Detail

D2.0E | CASA

PARK

Castillo de San Marcos National Monument

PROJECT NUMBER

CASA-2020-1185

UNIT | AREA

DRAWING SCALE

Not to Scale

SIGN CATEGORY

Identity

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

06-21-2021

DESCRIPTION

PANEL:

Routed Wood

STRUCTURE:

Steel Posts

ENLARGE FOR FULL SCALE

D3.0 | CASA

PARK

Castillo de San Marcos National

PROJECT NUMBER

CASA-2019-1185-MP

UNIT | AREA

DRAWING SCALE

As Indicated

SIGN CATEGORY

Identity/VIS

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

06-21-2020

DESCRIPTION

PANEL:

Exterior Grade material/finish to be specified by contractor to meet requirements indicated

STRUCTURE:

Wall Mount using VHB tape

ENLARGE FOR FULL SCALE

Contractor to specify materials and fabrication techniques. Vinyl wrap unacceptable. Material must be suitable for tactile signs in an outdoor environment, able to withstand repeated use, and able to be cleaned/sanitized.

Sign surface to be smooth, matte finish, fingerprint and smudge resistant. Contractor to provide instructions for cleaning.

Signs to be frameless, wall mount as specified in drawings (VHB tape or mounts designed by contractor). Panels thickness must be adequate to ensure panels are self-supporting and do not bend or warp.

Contractor to supply a minimum 2 year warranty against wear and fading.

Exterior Tactile Sign - Raised Characters, Braille

Figure A - Panel Elements

8 AM – 4:30 PM

MONDAY TO FRIDAY, CLOSED HOLIDAYS

NO WEAPONS

RING BELL FOR SERVICE

NATIONAL PARK SERVICE

ADMINISTRATIVE OFFICES

Overbar not raised

All Characters, Lines,and Arrows to be Raised, Prismatic as Detailed in Figure B

Contractor to Supply UEB Braille Compliant With ABAAS Section 703 Signs in Spaces Indicated, Ensuring 3/8” Clear Space Around all Sides. Braille to Match Panel Background Color.

Shaded Bounding Boxes do not Print.

3/8” Radius Corners

Panel and Overbar colors to wrap around panel edges to panel back.

Red and Black areas of Symbols Raised, NOT Prismatic.

White Symbol Background Flush with Panel Surface.

D3.0A | CASA

Castillo de San Marcos National

PROJECT NUMBER

CASA-2019-1185-MP

UNIT | AREA

DRAWING SCALE

As Indicated

SIGN CATEGORY

Identity/VIS

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

06-21-2020

DESCRIPTION

PANEL:

Exterior Grade material/finish to be specified by contractor to meet requirements indicated

STRUCTURE:

Wall Mount using VHB tape

ENLARGE FOR FULL SCALE

Exterior Tactile Sign - Raised Characters, Braille (continued)

Base of Tactile Elements to be the Thickness Shown in Design Intent Drawings

Tops of Tactile Elements to be Flat with Edges Crisp but Not Sharp

Tactile Element

Panel Surface

Angle must be < 85˚. Contractor to Specify Angle to Produce Prismatic Shape that can be Easily and Comfortably Traced with a Finger

Tactile Elements to be Between 1/16” and 1/8”.

Contractor to Specify.

Figure B - Tactile Elements

Figure C - Tactile Sign Color Swatches

White

Symbols

Rich Black

Symbols

MP68240

PMS 485

Prohibition Symbols

PMS 7531

Panel Background and Braille

Northwood Brown

MP63853

PMS 449

ID Overbar

River Rock

MP 63852

PMS Warm Gray 1

Typography

Old Prairie

MP63854

C6 M7 Y9 K11 C0 M96 Y100 K0

C11 M74 Y100 K50

C0 M32 Y100 K0 PMS Warm Gray 2 PMS 485

PMS 1615

PMS 124

MP68248 MP68240 MP67663

PMS 449

River Rock MP63852 NPS 1615 Brown MP62376

White

Rich Black

C32 M37 Y73 K82

Overbar Panel Background

Panel Background

C15 M14 Y17 K0 PMS Warm Gray 1

MP68248

Type

Panel BackgroundProbibition

Overbar, Panel Background, Arrowhead

Type, Symbols, Arrowhead

Overbar, Panel Background, Type, Symbols

PMS 7531

Northwood Brown

MP63853

C16 M28 Y36 K51

D4.0 | CASA

PARK

Castillo de San Marcos National Monument

PROJECT NUMBER

FOMA-2020-1185

DRAWING SCALE

1/2" = 1' - 0"

SIGN CATEGORY

VIS and ID/VIS

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

06-21-2021

DESCRIPTION

PANEL:

0.080” Aluminum with Direct-imaged or Image-transfer Graphics

STRUCTURE:

Post

Panels shall be high-resolution capable of single and or double-sided. Panels are direct imaged or image transfered using UV resistant pigments on 0.080” thick alumi-num, finished with a clear baked on VOC free powder coat, and 3/8” radius corners.

Panels shall have the capability to display a matte surface.

Vinyl wrapped aluminum panels are not acceptable.

Panels that are post-mount will have painted backs - colors are indicated in drawings. Wall and frame mount panels will have blank backs. All panel backs are to be labeled with their corresponding drawing number.

Panels to be installed into frames to be trimmed to 1/8” below nominal dimensions specified in drawings.

Park to provide posts and mounting hardware unless otherwise specified

Direct Image, Powder Coated Aluminum Panel Detail

National Monument

Protect History

Tickets Required Beyond This Gate

No Food or Drink Except Water

No Weapons

No Smoking, Vaping, or Tobacco Use

No Pets Service Animals Welcome

Do Not Climb or Sit on Walls or Cannons

No Drones

Shoes and Shirt Required

Use Caution No Railings, Uneven Surfaces

The Castillo is Open 9:00 am to 5:15 pm

3/8” Radius Corners

Aluminum edges are to be clean and free of burrs and rough edges

Direct Imaged or Image Transfered, UV-Resistant Pigments, finished with a Clear, Baked-On VOC-Free Powder Coat

Reverse Side to be Painted to match the main color on the panel’s front UNLESS the panel is to be installed into a frame

3/8” Mounting Holes as indicated in drawings

DANGER PELIGRO

No railings, low walls, and uneven surfaces.

Do not climb, sit, or stand on walls or cannons.

Supervise children carefully.

No hay barandillas, los muros son bajos y las superficies desiguales.

No se suba, se siente o se pare en las murallas o los cañones.

Supervise a los niños muy de cerca.

Cárcel • Prison

Keep Off Cannons And Walls

Please Do Not Block Door

Staff Only

Aluminum graphic panel as specified in D4.0 adhered to galvanized steel Trail Side base using VHB tape.

Galvanized Steel Trail Side Base Detail

D5.0 | CASA

PARK

Castillo de San Marcos National Monument

PROJECT NUMBER

CASA-2020-1185

DRAWING SCALE

as indicated

SIGN CATEGORY

VIS

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

06-21-2021

DESCRIPTION

PANEL:

0.080” Aluminum with Direct-imaged or Image-transfer Graphics see page D4.0

STRUCTURE:

Galvanized Steel Trail Side Base

VIS Trailside 6x12

45°

GL

Trail Side - Connection detail, Front and Side Elevation

Trail Side Side Elevation

Scale: Actual Size

.250 Breakformed Galvanized Steel

Attach panel with VHB Tape

.080” Graphic Panel

6"

Panel Height: 6", 12" or 18"

1/16"

1/16"

45°

3"2"

2-UP

GL

D6.0 | CASA

PARK

Castillo de San Marcos National Monument

PROJECT NUMBER

CASA-2020-1185

DRAWING SCALE

as indicated

SIGN CATEGORY

VIS

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

06-21-2021

DESCRIPTION

PANEL:

0.080” Aluminum with Direct-imaged or Image-transfer Graphics, see page D4.0

STRUCTURE:

VIS Upright Galvanized Steel

Upright Series, Single-Sided Galvanized Steel Fabrication

General Note:

All steel edges shall be eased to prevent sharp edges.

1-UP Upright Elevation

Scale: 1/2" = 1' -0"

5/16"

1/4"-20 x 3/8", 18-8 Stainless Steel, Flat Head, Phillips Machine Screw Note: Top of Frame is Connected by Screws and is Removable

Post Cap Welded to Top of Post

1/4"-20, 316 Stainless Steel Nut Welded to Steel Angle

1-3/4"

1/4" Diameter, 18-8 Stainless Steel High Strength, Wide

Grip, Dome Style Blind Rivet Note: Refer to Rivet Chart for Quantity per Frame

2-UP Side Section Cut

Scale: 1/2 Actual Size

3-UP

.125" Galvanized Steel Core Panel Welded to Angle

.090 to .125 Graphic Panel

1" x 1" x 1/8" Breakformed Steel Angle

1-3/4" x 3/4" x 1/8" Breakformed Galvanized Steel Angle

1/8" Drilled Weep Hole Note: See Weep Hole Chart

"4 /3

"4 /3

2" x 3" x 1/8" Tubular Galvanized Steel Post

1" x 1" x 1/8" Breakformed Galvanized Steel Angle

1-3/4" x 3/4" x 1/8" Breakformed Galvanized Steel Angle

Footer to be determined by contractor based on local condi-tions. Mount (in-ground or baseplate) specified in drawings.

Upright Series, Single-Sided Galvanized Steel Fabrication

D6.0A | CASA

PARK

Castillo de San Marcos National Monument

PROJECT NUMBER

CASA-2020-1185

DRAWING SCALE

SIGN CATEGORY

VIS

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

06-21-2021

DESCRIPTION

PANEL:

0.080” Aluminum with Direct-imaged or Image-transfer Graphic see page D4.0s

STRUCTURE:

VIS Upright Galvanized Steel

4-UP

3-UP Frame Front Elevation

Scale: 1/2 Actual Size

1/ 8"

U n d er cu t

Pa n el

"4/ 3

"61/ 1

3/4"

1/16"

Line Of 1/8" Steel Frame

Post Cap

Line Of 1/8" Undercut Graphic Panel

2" x 2" x 1/8" Tubular Steel Posts

N o m in al D im en si o n

/2

4-UP Frame Top Section

Scale: 1/2 Actual Size

1/8" Undercut Panel

"61/5

"4/ 3- 1

1/8" Steel Core Panel Welded to Steel Angle

.080 to .125 Graphic Panel

1/16" Gap For Panel Expansion

1" x 1" x 1/8" Breakformed Steel Angle

2" x 3/4" x 1/8" Breakformed Steel Angle

2" x 2" x 1/8" Tubular Steel Posts

See Weld Chart

1" x 1" x 1/8" Breakformed Galvanized Steel Angle

1/4" Diameter, 18-8 Stainless Steel High Strength, Wide Grip, Dome Style Blind Rivet Note: Refer to Rivet Chart for Quantity per Frame

1/16" Gap for Panel Expansion

2" x 3/4" x 1/8" Breakformed Galvanized Steel Angle

Upright Series, Single-Sided Galvanized Steel Fabrication, In-Ground (Direct Embed)

D6.0B | CASA

PARK

Castillo de San Marcos National Monument

PROJECT NUMBER

CASA-2020-1185

DRAWING SCALE

SIGN CATEGORY

VIS

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

06-21-2021

DESCRIPTION

PANEL:

0.080” Aluminum with Direct-imaged or Image-transfer Graphics see page D4.0

STRUCTURE:

VIS Upright Galvanized Steel

GL

5-UP Upright Direct Embed with Stabilizer Fins

Scale: 1.5" = 1'-0"

Based on Sign Size

M in im u m

12"

Optional 6" x 6" Plate

Base Post and Fin Coated with Base Metal Primer Up to 2" Above Grade

3" Gravel Layer

Backfill

1/8" Thick Stabilizer Fin Bolted or Welded to Base Post

2" M ax

10"

Upright Series, Single-Sided Galvanized Steel Fabrication, Base Plate

D6.0C | CASA

PARK

Castillo de San Marcos National Monument

PROJECT NUMBER

CASA-2020-1185

DRAWING SCALE

SIGN CATEGORY

VIS

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

06-21-2021

DESCRIPTION

PANEL:

0.080” Aluminum with Direct-imaged or Image-transfer Graphics see page D4.0

STRUCTURE:

VIS Upright Galvanized Steel

GL

3/8" Baseplate Welded to Sign Post Note: See Following Pages for Baseplate Dimensions Hard Surface

Grout

Compact Base Aggregate

3/8" -16 x 14" Stainless Steel J-Bolt with Matching Nuts and Washers Note: Four per footing

Concrete Footer

Gravel Base (For Drainage)

12" Minimum

Based on Sign Size

1-IO - 04 Baseplate Mount: Hard Surface, Elevation

Scale: 1-1/2" = 1'-0"

M in im u m , 3

6" M ax im u m

6"

5"

3/4"

2 1/2"

5"

3/ 4"

2- 1/

2"

Hole to Accept 3/8" -16 x 14" Stainless Steel J-Bolt

2-IO - 05 Baseplate Plan View, 2" x 3" Post Scale: 3" = 1'-0"

5"

3/4"

2 1/2"

3/ 4"

5"

2- 1/

2"

1-IO - 05 Baseplate Plan View, 2" x 2" Post Scale: 3" = 1'-0"

Hole to Accept 3/8" -16 x 14" Stainless Steel J-Bolt

D7.0 | CASA

Castillo de San Marcos National Monument

PROJECT NUMBER

CASA-2020-1185

DRAWING SCALE

as indicated

SIGN CATEGORY

VIS

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

06-21-2021

DESCRIPTION

PANEL:

0.080” Aluminum with Direct-imaged or Image-transfer Graphics, see page D4.0

STRUCTURE:

VIS Upright Galvanized Steel

Upright Series, Single-Sided Galvanized Steel Barstock Fabrication

.125" Steel Core Panel Welded to Angle

.090 to .125 Graphic Panel

1" x 1" x 1/8" Breakformed Galvanized Steel Angle

1-3/4" x 3/4" x 1/8" Breakformed Galvanized Steel Angle

1/8" Drilled Weep Hole Note: See Weep Hole Chart

3/8"

"4 /3

"4 /3

2-UP - 01 Side Section Cut

Scale: 1/2 Actual Size

3/8" x 1/4" Barrel Diameter 18-8 Stainless Steel, Torx Pin In Head

Barrel with 1/4", 10-24, 18-8 Stainless Steel, Torx Pin In Head Machine Screw

1-3/4" 1/4"-20 x 3/8", 18-8

Stainless Steel, Flat Head, Phillips Machine Screw

Note: Top of Frame is Connected by Screws and is Removable

1/4"-20, 316 Stainless Steel Nut Welded to Steel Angle

1-UP - 02

1/2" x 2" Galvanized Steel Barstock Post

1" x 1" x 1/8" Breakformed Galvanized Steel Angle

1-3/4" x 3/4" x 1/8" Breakformed Steel AngleNote: Ease Top Edge of Post

GL

1-UP - 01 Upright Elevation

Scale: 1/2" = 1' -0"

See Installation Options

1/2" 2"

2-UP - 01

General Note:

All breakformed steel and aluminum frame edges shall be eased to prevent sharp edges and allow paint adherence.

D7.0A | CASA

Castillo de San Marcos National Monument

PROJECT NUMBER

CASA-2020-1185

DRAWING SCALE

as indicated

SIGN CATEGORY

VIS

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

06-21-2021

DESCRIPTION

PANEL:

0.080” Aluminum with Direct-imaged or Image-transfer Graphics, see page D4.0

STRUCTURE:

VIS Upright Galvanized Steel

Upright Series, Single-Sided Galvanized Steel Barstock Fabrication

2-UP - 02 Frame Top Section

Scale: 1/2 Actual Size

1/8" Steel Core Panel Welded to Steel Angle

.080 to .125 Graphic Panel

1/16" Gap For Panel Expansion

1" x 1" x 1/8" Breakformed

2" x 3/4" x 1/8" Breakformed Galvanized Steel Angle

Galvanized Steel Angle

1" x 1" x 1/8" Breakformed Galvanized Steel Angle

3/8" x 1/4" Barrel Diameter 18-8 Stainless Steel Torx Pin In Head Barrel with 1/4", 10-24, 18-8 Stainless Steel, Torx Pin In Head Machine Screw

1/16" Gap for Panel Expansion

2" x 3/4" x 1/8" Breakformed Galvanized Steel Angle

1/2" x 2" Galvanized Steel Barstock Posts

1/8" Undercut Panel

"61/5

"4/ 3- 1

See Weld Chart

1-UP - 02 Frame Front Elevation

Scale: 1/2 Actual Size

2-UP - 02

Line Of 1/8" Galvanized Steel Frame

Line Of 1/8" Undercut Graphic Panel

1/2" x 2" Galvanized Steel Barstock Posts

1/ 8"

U n d er cu t

Pa n el

"4/ 3

"61/ 1

1/16"

N o m in al D im en si o n

/2

D8.0 | CASA

Castillo de San Marcos National Monument

PROJECT NUMBER

CASA-2020-1185

DRAWING SCALE

as indicated

SIGN CATEGORY

VIS

REVISION | DATE

PAGE NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

06-21-2021

DESCRIPTION

PANEL:

STRUCTURE:

Bulletin Case wall mount

Bulletin Case - Wall Mount - Galvanized Steel

2-BW - 01 Bulletin Case Elevation

Scale: 1/2" = 1'-0"

3-BW - 01 Bulletin Case Section

Scale: 1/2 Actual Size

Gas Spring Mounting Clip-Formed, .063" Thick Aluminum Sheet

Gas Spring Mounting Clip-Formed, .063" Thick Aluminum Sheet

Note: Extrusion Notch to Clear Gas Spring

Reducible-Force Gas Spring 90 lbs. Max Force, 7.87" Stroke, M5 Male Thread SZ

Gas Spring Mounting Bar - .25" Thick

Galvanized Steel Plate

Adhesive- Backed EPDM Extra Soft Black

Foam Rubber Strip

Glass Edge Trim:

Neoprene Rubber

Edge Trim

3/16" Thick Lexan

Reducible-Force Gas Spring 90 lbs.

Max Force, 7.87" Stroke, M5 Male

Thread SZ

Miniature Cam Lock Keyed Alike to #105, 1/2" Hole Diameter

Piano Hinge without Holes .060" Thick, 2" Open

Custom Corner Key: .25" Thick Aluminum Plate

3-BW - 01

1-BW - 02 1-

3/

8"

2-5/16"

1-BW - 02 Bulletin Case Section

Scale: 1/2 Actual Size

Adhesive- Backed EPDM Extra Soft Black

Foam Rubber Strip

3/16" Thick Lexan

Note: Extrusion Notch to Clear

Cam Lock

Glass Edge Trim:

Neoprene Rubber

Edge Trim

1/4" Diameter Hole

Mounting Hardware

Case Back:

.125" Galvanized Steel Note: To be welded to body frame

Case Body Frame Galvanized Steel Extrusion

Case Body Frame Galvanized Steel Extrusion

#8 - 32 Thread X 1/4" Long Zinc-plated Steel Flat Head CTSK. Machine Screw

D9.0 | CASA

Castillo de San Marcos National Monument

PROJECT NUMBER

UNIT | AREA

DRAWING SCALE

as indicated

SIGN CATEGORY

Motorist Guidance

REVISION | DATE

DRAWING NUMBER

National Park Service U.S. Department of the Interior NPS Sign Program

DRAWING DATE

06-21-2021

DESCRIPTION

PANEL:

.080” aluminum with very high intensity retroreflective vinyl

STRUCTURE:

Wood Post unless otherwise indicated in drawings

ENLARGE FOR FULL SCALE

GL

D ep en d in g o n S ig h t Li n es a n d L o ca l C o n d it io n s

4x4 Wood Posts Painted to Match NPS Brown, Matthews Paint MP63848

Breakaway or Frangible Coupling as Required by

State and Local Codes

Footer Engineering and Depth as Required for

Structural Integrity and Per State and Local Codes

4-D4.0

2-D4.0 NPS Standard .080” Aluminum -Sign Elevations

For Panels up to 36"

.080 Aluminum Sign Panel with 3/8" Radius Corners, Panel Back Painted to Match NPS Brown, Matthews Paint MP63848

White Type III/IV Very High Intensity Full Sheet Application to Aluminum Panel

Translucent Overlay Film (use standard FHWA colors) with Compute-Cut Graphics or Equivalent Process

1-D4.0 NPS Standard .080 Aluminum Fabrication

For Panels Up To 36" Wide

4-D4.0 Panel Post Attachment Detail

Scale: 3" = 1' - 0"

3" 3"

.080” Aluminum Sign Panel

1/4"-20 x 5" Long Galvanized Steel

Carriage Bolt with Washer and Nut

4x4 Breakaway Timber Post Painted to Match NPS Brown, Matthews Paint

MP63848

3-D4.0 .080 Aluminum Panel Details

Scale: 3/4" = 1' - 0"

3" 3" eq eq

3/8" Radius Corners (Typ)

5/16" Mounting Holes (Typ)

Panel Back Painted To Match NPS Brown (Typ)

Up to 36"

NPS Brown Matthews Paint

MP63848

(Or equiv.)

Panel Back, Mounting Rail, Post Color: