9-Spec 2 - International HV607 Mix-in-place Concrete Truck .pdf
PDF 643 KB Posted
- Solicitation number
- ITB-26-00259
- Issued by
- Hillsborough County, Florida
About this file
This is a specification document for an International HV607 concrete truck equipped with a Zimmerman ZM-400N1 6-cubic-yard rear discharge volumetric mixer, prepared for Hillsborough County Board of County Commissioners in Florida. The specification details the base chassis configuration, including a 6x4 axle arrangement, a Cummins L9 330 diesel engine rated at 330 horsepower, and an Allison 3500 RDA automatic transmission. The concrete mixer features a 6-yard capacity with a 30-yard-per-hour production rate, dual chain material feed system, a 9-foot auger with replaceable wear pads, and includes operator training at the customer location. The truck comes equipped with standard safety features including air brake systems, automatic slack adjusters, anti-lock braking, and various lighting configurations. Optional installations include remote power distribution equipment, four-corner LED strobe lights, backup camera with monitor, and a 51-inch cab-mounted strobe light bar.
The specification prescribes specific brands and model numbers throughout the vehicle, from the Meritor axles and Hendrickson suspension to the Horton fan drive and Racor fuel/water separator, allowing for equivalent substitutions only where noted. The dealer is responsible for providing title, county tag, registration, and temporary tags, along with minimum quarterly build status updates to Hillsborough County Fleet Management. The dealer must arrange offload capabilities for vehicle delivery and is prohibited from utilizing original equipment manufacturer wiring for addon equipment. Installation requirements for optional equipment are detailed, including specific wiring diagrams and fuse protection specifications for the four-corner LED lighting system, which must be controlled by a toggle switch mounted on the dashboard.
View the file
Other files
Show all 14
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
INTERNATIONAL HV607 CONCRETE TRUCK WITH ZIMMERMAN ZM-400N1 6CY
REAR DISCHARGE VOLUMETRIC MIXER
PCN 160877
GENERAL SPECIFICATIONS
• Base chassis, International model HV607 SBA with 224.00 wheelbase, 156.90 ca, and
75.00 axle to frame.
• Tow hook, front (2) frame mounted
• Axle configuration {Navistar} 6x4
• Frame rails heat treated alloy steel (120,000 psi yield); 10.125" x 3.580" x 0.312" (257.2mm x 90.9mm x 8.0mm); 480.0" (12192) maximum OAL
• Frame reinforcement full outer c-channel, heat treated alloy steel (120,000 psi yield), 10.813" x 3.892" x 0.312" (274.6mm x 98.8mm x 7.9mm), 480.0" (12192mm) OAL
• Bumper, front swept back, steel, painted 0001 canyon black, heavy duty wheelbase range 221" (560cm) through and including 262" (665cm)
• Axle, front non-driving {Meritor mfs-18-133a} wide track, I-beam type, 18,000-lb capacity
• Suspension, front, spring parabolic taper leaf, shackle type, 18,000-lb capacity, with shock absorbers
• Brake system, air dual system for straight truck applications drain valve {Bendix DV-2} automatic, with heater, for air tank
• Air brake abs {Bendix antilock brake system} 4-channel (4 sensor/4 modulator) full vehicle wheel control system
• Air dryer {Wabco system saver 1200} with heater
• Brake chambers, rear axle {Bendix Eversure} 30/30 sqin spring brake
• Brake chambers, front axle {Bendix} 24 sqin
• Slack adjusters, front {Haldex} automatic
• Slack adjusters, rear {Haldex} automatic air
• Compressor {Cummins} 18.7 cfm
Katy Mei Cross-Out
PCN 160877
• Air dryer location mounted outside right rail, back of cab
• Air tank location (2) mounted under battery box, outside left rail, back of cab, perpendicular to rail
• Dust shields, front brake for air cam brakes
• Dust shields, rear brake for air cam brakes
• Brakes, front {Bendix Spicer es-165-6x} air s-cam type, heavy duty fabricated spider, fabricated shoe, single anchor pin, size 16.5" x 6", 23,000-lb capacity
• Brakes, rear {Bendix Spicer es-165-8x} air s-cam type, heavy duty fabricated spider, fabricated shoe, single anchor pin, size 16.5" x 8.625", 23,000-lb capacity per axle
• Park brake chambers, additional (2) spring brake type
• Steering column tilting
• Steering wheel 4-spoke; 18" dia., black
• Steering gear (2) {Sheppard m100/m80} dual power
• Driveline system {Dana Spicer} SPL140 main driveline with SPL 170 interaxle shaft, for 6x4
• Aftertreatment cover steel, black
• Exhaust system single, horizontal aftertreatment device, frame mounted right side under cab, for single vertical tail pipe, frame mounted right side back of cab
• Muffler/tail pipe guard (1) aluminum
• Tailpipe turnback type exhaust height 10”
• Electrical system 12-volt, standard equipment cigar lighter includes ash cup
• Power source cigar type receptacle without plug and cord
• Alternator {Leece-Neville AVI160p2013} brush type, 12 volt, 160 amp capacity, pad mount, with remote sense
• Body builder wiring back of day cab at left frame or under sleeper, extended or crew cab at left frame; includes sealed connectors for tail/amber turn/marker/ backup/accessory power/ground and sealed connector for stop/turn
PCN 160877
• Battery system (Fleetrite} maintenance-free, (2) 12-volt 1900cca total, top threaded stud speakers (2) 6.5" dual cone mounted in doors
• Input back-up alarm electric, 102 dba
• Horn, electric disc style
• Battery box steel, with plastic cover, 18" wide, 2-4 battery capacity, mounted left side back of cab
• Windshield wiper speed control force wipers to slowest intermittent speed when park brake set and wipers left on for a predetermined time
• Clearance/marker lights (5) {truck lite} amber led lights, flush mounted on cab or sunshade
• Test exterior lights pre-trip inspection will cycle all exterior lamps except back-up lights
• Headlights on w/wipers headlights will automatically turn on if windshield wipers are turned on
• Starting motor {Delco Remy 38MT type 300} 12 volt, less thermal over-crank protection indicator, low coolant level with audible alarm
• Alarm, parking brake electric horn sounds in repetitive manner when vehicle park brake is "not" set, with ignition "off" and any door opened
• Circuit breakers manual-reset (main panel)SAE type III with trip indicators, replaces all fuses turn signals, front includes led side turn lights mounted on fender
• Horn, air single trumpet, black, with lanyard pull cord logos exterior model badges
• Logos exterior, engine badges
• Grille stationary, chrome
• Front end tilting, fiberglass, with three-piece construction, for Workstar/HV paint schematic, pt-1 single color, design 100
• Paint type base coat/clear coat, 1-2 tone
• Keys - all alike fleet - includes ignition and cab door keys
• Engine, diesel {Cummins l9 330} EPA2017, 330hp @ 2000 rpm, 1000 lb-ft torque @ 1400 rpm,
• 2200 rpm governed speed, 330 peak hp (max)
PCN 160877
• Fan drive {Horton Drivemaster} direct drive type, two speed with residual torque device for disengaged fan speed
• Radiator aluminum, cross flow, front to back system, includes in-tank oil cooler
• Air cleaner single element
• Throttle, hand control engine speed control; electronic, stationary, variable speed;
mounted on steering wheel
• Engine control, remote mounted provision for; includes wiring for body builder installation of PTO controls and starter lockout, with ignition switch control, for Cummins b6.7 and l9 engines
• Transmission, automatic {Allison 3500 RDA} 5th generation controls, wide ratio, 6-speed with double overdrive, with PTO provision, less retarder, includes oil level sensor, with 80,000-lb GVW and GCW max, on/off highway
• Transmission shift control column mounted stalk shifter, not for use with Allison 1000 & 2000 series transmission
• Transmission oil synthetic; 29 thru 42 pints
• Allison spare input/output for rugged duty series (RDS) and regional haul series (RHS), general purpose trucks, construction, package number 223
• Neutral at stop Allison transmission shifts to neutral when service brake is depressed and vehicle is at stop; remains in neutral until service brake is released
• Shift control parameters {Allison} 3000 or 4000 series transmissions, performance programming
• PTO location customer intends to install PTO at right side of transmission
• Axle, rear, tandem {Meritor MT-40-14x-4DCR-P } single reduction, 40,000-lb capacity, with lube oil pump, .433"(11mm) wall housing thickness, driver controlled locking differential in forward- rear and rear-rear axle, r wheel ends. Gear ratio: 5.29
• Suspension, rear, tandem {Hendrickson HMX-400-54} walking beam, 40,000-lb capacity, 54" axle spacing, rubber springs, with transverse torque rods, rubber end bushings
• Location fuel/water separator mounted outside left rail, 41" back of cab
• Fuel/water separator {Racor 400 series,} with primer pump, includes water-in-fuel sensor
• Fuel tank top draw, non-polished aluminum, d-style, 19" tank depth, 70 us gal (265l), PCN 160877 mounted left side, under cab
• Def tank 7 us gal (26l) capacity, frame mounted outside left rail
• Cab conventional, day cab
• Air conditioner with integral heater and defroster
• Gauge cluster base level; English with English speedometer and tachometer, for air brake chassis, includes engine coolant temperature, primary and secondary air pressure, fuel and def gauges, oil pressure gauge, includes 3 inch monochromatic text display
• Grab handle, cab interior (2) safety yellow
• IP cluster display on board diagnostics display of fault codes in gauge cluster
• Seat, driver {national 2000} air suspension, high back with integral headrest, vinyl, isolator, 1 chamber lumbar, with 2 position front cushion adjust, -3 to +14 degree angle back adjustSeat, passenger {national} non suspension, high back with integral headrest, vinyl, with fixed back, with under seat storage
• Mirrors (2) c-loop, black heads and arms, 7.5" x 14" flat glass, includes 7.5" x 7" convex mirrors, for 102" load width
• Seat belt all orange; 1 to 3
• Cab interior trim classic, for day cab arm rest, right, driver seat
• Window, power (2) and power door locks, left and right doors, includes express down feature
• Cab rear suspension air bag type
• Instrument panel flat panel
• Access, cab steel, driver & passenger sides, two steps per door, for use with day cab and extended cab
• Wheels, front {Accuride 29807} disc; 22.5x12.25 rims, powder coat steel, 5-hand hole, 10-stud,
• 285.75mm BC, hub-piloted, flanged nut, with steel hubs, offset 5.37"
• Wheels, rear {Maxion 90541} dual disc; 22.5x8.25 rims, painted steel, 2-hand hole, 10-stud,
• 285.75mm BC, hub-piloted, flanged nut, with steel hubs
PCN 160877
• Paint identity, rear wheels disc rear wheels; with vendor applied white powder coat paint
• (8) tire, rear 11r22.5 load range g hdl2 dl eco plus (continental), 491 rev/mile, 75 mph,
• Drive
• (2) tire, front 385/65r22.5 load range l hac 3 (continental), 479 rev/mile, 68 mph, all-
• Position
• Warranty standard for HV607 models
Zimmerman concrete body specifications
Zimmerman industries - 6-yard rear discharge volumetric mixer, ZM-400N1 series, standard production
• Dual chain material feed system
• Aggregate bin with center divider
• Cement bin with power agitator with chain feed system, self-cleaning
• Polyethylene water tank
• Hydraulic water pump with a solenoid valve
• Digital water flow meter
• 4-section hydraulic pump
• Automatic cam operated vibrators
• Material counter
• 9’ mix auger with replaceable ni-hard wear pads
• Power auger lift and swing
• Manual telescopic chutes, mounted to the auger
• Unit painting (white) to include two coats of epoxy primer and two coats of industrial grade polyurethane paint
• Unit mounting on truck chassis calibration yield box
• Swivel chute
• Spotlight and strobe light package
• Mechanical meter
• Electric recoil tarp
• Water tank deck fill (1 ½” coupler)
• Mixer specifications
• Capacity – 6 yards
• Production rate – 30 yards / hour
• Cement – 60 cubic feet
PCN 160877
• Water – 200 gallons
• Ag bin capacity – 217 cubic feet
• Hydraulic pump – 4 sections
• Chain delivery system
• Auger length – 9 feet
• Auger diameter – 9 inches
Operator training at customer location
ADDITIONAL OPTIONS INSTALL
• Install remote power distribution equipment (see requirements below)
• Tint
• 4 corner strobes four corner light kit (see requirements below)
• Back up camera with monitor
• Cone & cooler holder
• 51" cab mounted strobe/light bar with 6 position controller
• Traffic advisor with controller
THE DEALER IS RESPONSIBLE FOR PROVIDING TITLE, COUNTY TAG AND REGISTRATION.
THIS SHALL INCLUDE THE TEMPORARY TAG, TWO WAY OVERNIGHT SHIPPING OF ALL
DOCUMENTATION AND ANY ASSOCIATED FEES
IN ACCORDANCE WITH HILLSBOROUGH COUNTY FLEET MANAGEMENT POLICY, DEALER
IS RESPONSIBLE FOR ARRANGING OFFLOAD CAPABILITIES FOR THEIR VEHICLES OR
EQUIPMENT BEING DELIVERED.
THE DEALER WILL PROVIDE HILLSBOROUGH COUNTY FLEET MANAGEMENT WITH
MINIMUM QUARTERLY UPDATES ON THE BUILD/ORDER STATUS OF EQUIPMENT.
DEALER MUST NOT UTILIZE OEM WIRING FOR EQUIPMENT ADD‐ONS DEALER MUST
ABIDE BY GENERAL PRACTICES COVERED UNDER OEM. *REMOTE POWER DISTRIBUTION
POINT SHALL BE INSTALLED AND BE OF, OR EQUIVALENT TO BELOW DIAGRAM.
PCN 160877
4 Corner LED Requirements
PCN 160877
PCN 160877
4 Corner LED Lights / Formerly Called Strobes (VENDOR):
Install led directional light #BK7308093 (4 ea) - the color of all 4 LEDs shall be white.
One LED is to be installed in each corner of the unit’s front grille and rear bumper sections as shown using red circles in attached pictures.
All 4 bulbs shall be mounted and wired according to manufacturer’s guidelines and be controlled by one toggle switch #ECHRS1032 where LEDs can be activated/deactivated without ignition being on. Toggle switch shall be mounted in center bottom portion of dashboard to prevent accidental activation. All wiring shall be secured in a fashion that prevents chaffing, shorting of circuit, and becoming snagged on any debris while unit is in operation. The complete circuit shall be fuse protected using a #BK782-2023 fuse holder at the battery.
File details come from the government source that posted it. Updated .