RFI MIL-STD-188-165 Rev 1.1.docx
Military Standard Rev. 1 DOCX document 219 KB Posted
- Solicitation number
- 832469721
- Issued by
-
Defense Information Systems Agency
About this file
This document is a Request for Information (RFI) issued by the Defense Information Systems Agency (DISA) seeking industry feedback on proposed changes to MIL-STD-188-165, the Department of Defense (DoD) Interface Standard for Interoperability of Super High Frequency Satellite Communications Phase-Shift Keying (PSK) Modems.
The RFI requests input on specification adjustments in several areas, including test parameters for Multiple-Carrier modems, Time Division Multiple Access (TDMA), Frequency Hopping Spread Spectrum (FHSS), and Direct Sequence Spread Spectrum (DSSS), as well as additional Positive Control data points. Companies are asked to provide responses by July 12, 2024, and are encouraged to attend an Industry Day event from August 5-9, 2024 in Colorado Springs, Colorado. This RFI is for information and planning purposes only, and the government does not intend to award a contract or pay for information received.
View the file
Other versions and copies of MIL-STD-188-165
Who attaches MIL-STD-188-165
| Agency | Files |
|---|---|
| Defense Information Systems Agency | 10 |
Other files
| File | Type | Posted |
|---|---|---|
| RFI MIL-STD-188-165 Appendices Positive Control .docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
UNCLASSIFIED
DEFENSE INFORMATION SYSTEMS AGENCY
Request for Information (RFI):
MIL-STD-188-165
Industry Week Revision 1.1
THIS IS A REQUEST FOR INFORMATION (RFI) ONLY. THIS IS NOT A REQUEST FOR PROPOSALS. NO SOLITICIATION IS AVAILABLE AT THIS TIME.
UNCLASSIFIED
Description
REQUEST FOR INFORMATION (RFI)
REQUIREMENT
Industry input on Change to Military Standard (MIL-STD) MIL-STD-188-165: Interoperability of Super High Frequency Satellite Communications Phase-Shift Keying (PSK) Modems Defense Information Systems Agency (DISA) is seeking Industry feedback to proposed changes to MIL-STD-188-165.
THIS IS A REQUEST FOR INFORMATION (RFI) ONLY. THIS IS NOT A REQUEST FOR PROPOSALS. NO SOLICITIATION IS AVAILABLE AT THIS TIME.
1.0 Overview/Purpose
The Department of Defense (DoD) is soliciting industry to provide comments on the published MIL-STD-188-165B/Change 1 (January 2, 2024) and prepare responses to satisfy unique DoD requirements for future updates to the MIL-STD. Responses should include, but are not limited to, specification adjustments in the following areas of interest: 1) Test parameters for Multiple-Carrier modems, Time Division Multiple Access (TDMA), Frequency Hopping Spread Spectrum (FHSS), and Direct Sequence Spread Spectrum (DSSS). 2) Positive Control data points.
2.0 Scope of Effort
This RFI request is solely for gathering information and planning purposes. This RFI does not commit the U.S. Government to contract for any services or supplies whatsoever. All are advised that the U.S. Government will not pay for any information or administrative costs incurred in response to this RFI; all costs associated with responding to this RFI will be solely at the interested party’s expense. Not responding to this RFI does not preclude participation in any future solicitations or requests for proposal (RFPs).
3.0 Technical Characteristics
The continuing evolution of modem capabilities presents a number of challenges to developing relevant and useful modem design requirements. When MIL-STD 188-165 was first written, the preponderance of modems consisted of a limited set of modems with very few modulation and coding capabilities. This is no longer the case. In recognition of this, a number of adjustments have been made in the current MIL-STD 188-165B/C1. In the process of drafting an updated MIL-STD, a number of areas have been identified where additional investigation is necessary to craft a useful MIL-STD. In the interest of issuing meaningful guidance as soon as possible, it was decided to issue MIL-STD 188-165B/C1 while simultaneously investigating various areas of interest with the intent of including any updates to those areas in a future release.
| 4.0 | Requested Information |
| 4. 1 | Appendix data: The existing MIL-STD-188-165B/C1 has multiple appendices for non-standard modem functionality. The following technologies for modems are new to DoD use on managed satellite payloads. The discussion is what additional considerations need to be in the appendices and what corresponding Section 5 paragraph(s) are to be superseded, replaced, or augmented. |
· Multiple-Carrier
· TDMA
· FHSS
· DSSS
| 4.2 | Positive Control: Table VII in the published MIL-STD-188-165B/C1 release details different control and monitoring points. With the changing technology of complex modem systems, provide additional parameters available that have not been captured in the existing standard, and which, if any, may no longer apply, along with any recommended formats for managing these control and monitoring points. |
| 4.3 | Impact Assessment: Industry should also report any other anticipated impact in planning and management of any requested changes. |
Response Guidelines Companies who wish to respond to this RFI should send responses via email no later than 12 July 2024. Companies submitting responses are encouraged but not required to attend the Industry Day meetings.
Industry Day Discussions Dates: Monday, 5th August 2024 to Friday, 9th August 2024.
Location: 6385 Corporate Drive, Suite 200, Colorado Springs, CO 80919 Times: Meetings will occur each day, with provisions on Monday and Friday to accommodate travel, as necessary.
| Monday | 0830 - 1700 | (Registration available 0830 – 0900) |
| Tuesday | 0830 - 1700 | |
| Wednesday | 0830 - 1700 | |
| Thursday | 0830 - 1700 | |
| Friday | 0830 - 1700 |
Note: Times may be adjusted to facilitate morning/afternoon travel once industry responses have been received.
Note: Industry week will also encompass discussion relating to MIL-STD-188-164. Discussion relevant to MIL-STD-188-164 will generally occur earlier in the week. A meeting agenda will be released once industry responses have been received.
Dress: Business Casual Teleconference Bridge: In person attendance will be limited. A teleconference bridge is planned but not yet confirmed for all sessions (meeting URL to be provided at a later date).
RSVP: The deadline for attendees to RSVP for the meeting is Friday 19 July 2024. Please RSVP at https://einvitations.afit.edu/inv/anim.cfm?i=895662&k=0A68470F7D55 Points Of Contact (POCs) Mr. Henry Tran at DISA Phone: 301-225-7496 NIPR: henry.h.tran.civ@mail.mil Mrs. Pamela Phillips at Delta 8 SATCOM Phone: 719-554-2002 NIPR: pamela.phillips.5@spaceforce.mil Mr. Jeremy Kozee at Delta 8 SATCOM Phone: 719-554-8835 NIPR: jeremy.kozee@spaceforce.mil Disclaimer This RFI is issued for information and planning purposes only.
THE GOVERNMENT DOES NOT INTEND TO AWARD A CONTRACT ON THE BASIS OF THE RFI OR OTHERWISE PAY FOR INFORMATION RECEIVED IN RESPONSES TO THE RFI.
Proprietary information and trade secrets, if any, must be clearly marked on all materials. All information received that is marked Proprietary will be safeguarded in accordance with the applicable Government regulations. Please be advised that all submissions become Government property and will not be returned. The Government shall not be liable for or suffer any consequential damages for any proprietary information not properly identified. All government and contractor personnel reviewing RFI responses will have signed non-disclosure agreements and understand their responsibility for proper use and protection from unauthorized disclosure of proprietary information as described 41 USC 423.
Attachments/Links
MIL-STD-188-165B/C1
https://quicksearch.dla.mil/qsDocDetails.aspx?ident_number=115558
History
| Revision |
| Date |
| Notes |
| 1.0 |
| 10 June 2024 |
| Initial version. |
RFI MIL-STD-188-165 Rev 1.1.docx, Rev 1.1 Page 3 of 4 image1.png
File details come from the government source that posted it. Updated .