SIMO RFP 80KSC027R0001 Questions 20261109.pdf

PDF 121 KB Posted

Attached to
Spaceport Infrastructure Maintenance and Operations (SIMO)
Solicitation number
80KSC027R0001
Issued by

About this file

This is a Responses to Request for Proposal (RFP) Questions document for the Spaceport Infrastructure Maintenance and Operations (SIMO) contract. The document addresses five substantive questions raised during the solicitation period, clarifying key proposal submission requirements and contract performance expectations.

Question 1 and 5 (duplicative inquiries) confirm that the Volume 1 – Technical Acceptability page limitation of 15 pages in the final RFP is intentional and correct, superseding the 125-page limit identified in the Draft RFP. The Government states this correction accurately reflects its determination of sufficient page count for technical proposals. Question 2 clarifies that the 25 percent minimum small business utilization goal applies to total contract value, with individual subcontracting plans to identify goals consistent with FAR 52.219-9, Alternate II, and applicable solicitation instructions. Question 3 specifies that for calculating small business and AbilityOne participation goals, offerors shall use the evaluated contract value, including proposed MSR pricing and pre-priced IDIQ Work pricing extended by Government-provided BEQs (including the Option to Extend Services value), with Government-provided non-proposed ODC values included as directed by the solicitation. Question 4 addresses associate contractor agreements (ACAs) and operating agreements (OAs) under PWS 1.2.1 Requirement #28, stating that the Contractor shall review identified agreements during phase-in and update, replace, or execute agreements as directed by the Contracting Officer, with offerors not required to include work in Core staffing or pricing solely because it appears in existing agreements if not otherwise required by the SIMO PWS, and the contract taking precedence in case of conflict.

View the file

Other files

Show all 15

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Spaceport Infrastructure Maintenance and Operations (SIMO) Responses to Request for Proposal (RFP) Questions

No. DRFP Area Section Paragraph No.

Page

Question Response

1 RFP Sections A-M 1852.215-81 Proposal Page Limitations. (Apr 2015)

Page Limit Table

70 The page limit table in Section 1852.215-81 Proposal Page Limitations (Apr 2015) currently identifies a 15-page limit for Volume 1 – Technical Acceptability. Given the breadth and number of requirements addressed within this volume, this represents a significant reduction from the 125 page limit identified in the Draft RFP (DRFP). Additionally, there were no Q&A responses or other communications during the draft solicitation period that indicated an anticipated change of this magnitude. Can the Government please confirm whether the 15 page limit is intentional or whether the intended page limit for Volume 1 – Technical Acceptability remains 125 pages, consistent with the DRFP?

The page limitation identified in the Draft RFP, Proposal Page Limitations provision was not an accurate representation of the Government's page expectations for Volume 1, Technical Acceptability. The 15-page limitation in the Final RFP, Proposal Page Limitations provision corrects this error and accurately reflects the Government's determination of a sufficient page count for Volume 1, Technical Acceptability.

2 RFP Sections A-M (2) Small Business Subcontracting

Paragraph (a)(2)

67 Section L, paragraph (a)(2), requires “a 25 percent total small business utilization goal,” but DRFP Q&A 32 states that the goal applies to “total contract value.” Section 1819.13(b)(7) of the Interim NASA FAR Supplement

The 25 percent minimum small business utilization goal applies to total contract value. Individual subcontracting plans shall identify goals consistent with FAR 52.219-9, Alternate II, and applicable solicitation instructions

Companion Guide (Updated Oct. 1, 2026), uploaded to the SIMO Bidders Library on October 26, 2026, requires goals expressed as percentages of both total subcontract dollars and total contract value. Please confirm which applies to the 25% minimum: total planned subcontracting dollars or total contract value.

3 DRFP

80KSC027R0001

Questions 20261028

Questions # 43 and

N/A 16, DRFP Q&A 43 and 219 address including IDIQ work in subcontracting goal calculations but do not specify the dollar value to use. When calculating small business and AbilityOne goals, should offerors use proposed MSR and IDIQ Work prices multiplied by the Government’s BEQs, the guaranteed minimums, the maximum ordering values, or another amount? Please also clarify whether to include the evaluated extension period.

For purposes of calculating small business and AbilityOne participation goals, Offerors shall use the evaluated contract value, including proposed MSR pricing and pre-priced IDIQ Work pricing extended by the Government-provided BEQs (including the Option to Extend Services value).

Government-provided non-proposed ODC values shall be included as directed by the solicitation.

4 Attachment J-01

PWS

1.2.1 Requirements #28 13 PWS 1.2.1 #28 addresses

associate contractor agreements (ACAs) and operating agreements (OAs).

Please identify which existing agreements apply to SIMO and when they must be updated or replaced. Must offerors carry forward work required by these

The Contractor shall review the identified agreements during phase-in and update, replace, or execute agreements as directed by the Contracting Officer.

Offerors are not required to include work in Core staffing or pricing solely because it appears in an existing ACA or OA if that agreements but not expressly identified in the SIMO PWS in Core staffing and pricing? If an agreement conflicts with the SIMO PWS, which takes precedence?

work is not otherwise required by the SIMO PWS. In the event of a conflict between an ACA/OA and the contract, the contract, including the PWS, shall take precedence

5 RFP Sections A-M 1852.215-81 Proposal Page Limitations. (Apr 2015)

Page Limit Table

70 The Volume 1 page limit was reduced from 125 pages in the draft RFP to 15 pages in the final RFP. Can the Government confirm that this change is correct?

See response to Question No. 1.

File details come from the government source that posted it. Updated .