8-!-CS27014-26066270-DFCM Addendum 1.pdf

DFCM Addendum Cover Page, 9.2.2026

DFCM Addendum #1 Reference: Roosevelt Heat Pumps Phase 2

DFCM Project #25093250 U3P Event #CS27014

Date: September 22, 2026

To: Contractors

From: The Division of Facilities Construction and Management

Note:

This

Addendum shall be included as part of the Contract Documents. Items in this Addendum apply to all drawings and specification sections whether referenced or not involving the portion of the work added, deleted, modified, or otherwise addressed in the Addendum. Bidders are required to acknowledge receipt of this Addendum when their bid is submitted. Failure to do so may subject the Bidder to disqualification.

Addendum Items

Solicitation Schedule Changes: There are no changes to the Solicitation Schedule in this addendum.

DFCM Addendum Items: Alt #1: Contractor to provide pricing to replace all thermostats to Daikin Heat Pump Thermostats.

Alt #2 Contractor to provide pricing to add BACnet cards to all heat pumps Click to enter text Click to enter text Click to enter text

A/E Addendum Items: A/E Addendum # 1 Drawings

Total Attached Pages: 6

Date: 09-22-2026 Project No: 260404 Project: UBTECH Roosevelt MAU Replacement Revision: Addendum #1

To:Contractors From: Resolut Group - Spencer Landeen

Addendum - The following revision, additions, deletions, and/or items of clarification shall hereby be included as an integral part of the Contract Documents for the above-listed project and shall be fully binding. All other requirements shall remain in effect of the original plans and specification.

REVISION HISTORY:

This addendum is being issued to respond to contractor questions.

DIVISIONS:21,22,23,25,26,28

DRAWINGS

Sheet: M111 - LEVEL 1 MECHANICAL PIPING PLAN

• Keynote 19 added to clarify what valves need to be replaced after the loop is rebalanced with new by-pass valves.

Sheet: M401 - MECHANICAL PICTURES

• Images of some existing conditions added.

Sheet: M601 - MECHANICAL SCHEDULES

• Schedule notes updated to clarify that outside air flow measuring station is to be provided by contractor.

Sheet: MI701 - MECHANICAL CONTROLS

• Keynotes updated to clarify that there is an existing controller that is to be reused.

• Keynote added to clarify who provides the outside air monitoring station.

PRIOR APPROVALS

BCS is allowed to provide a bid for test and balancing.

End of Addendum.

OUTSIDE OF SCOPE OF WORK

OUTSIDE OF SCOPE OF WORK

DHP-1

(E)DHP-2

(E)DHP-7

(E)DHP-3(E)DHP-4

(E)DHP-9

(E)DHP-5

(E)DHP-6

(E)DHP-10

(E)DHP-11

(E)DHP-12

(E)DHP-13

(E)DHP-14

(E)DHP-15

(E)DHP-16

(E)DHP-17

(E)DHP-18

(E)DHP-19

(E)DHP-20

(E)DHP-24

(E)DHP-21

(E)DHP-22

(E)DHP-23

(E)DHP-25(E)DHP-26(E)DHP-27(E)DHP-28(E)DHP-29

(E)DHP-8

M111

M111A

18MAU-3

18MAU-4

18MAU-1

18 MAU-2

(E)B

(E)B

(E)HX

(E)ST

4"

4"

4"

4"4"

L I C

E N

S E

D

PROFESS I ONAL

E N

G I N

E E

R

No. 190991

S

T A T E O F U T A

H

BENJAMIN L.

DAVIS

Project #: 260404

T H

IS

S

H E

E T

IS

IN

T E

D E

D T

O B

E P

R

IN

T E

D

IN

C O

L O

R

PROJECT NO:

DRAWN BY:

CHK'D BY:

DATE:

T H

IS

P

R

IN

T

IS

IN

C

O L

O R

A

BCDEFGHIJKLMN

ABCDEFGHIJKLMN

30x42

Stamp

9/

/2

9:

:4

A

M A ut od es k

D oc s:

//U

B T

E C

H R oo se ve lt

M A

U R ep la ce m en t/2

U

B T

E C

H R oo se ve lt

M A

U R ep la ce m en t_

M E

C H

_v

.rv t

JULY 10, 2026

LEVEL 1 MECHANICAL

PIPING PLAN

M111

U B

T E

C H

R oo se ve lt M

A U

R e pl a ce m e nt

U B

T E

C H

R o o s e v e lt M

A U

R e p la c e m e n t

E a s t L a g o o n S tr e e t R o o s e v e lt U

T

D F

C M

P R

O J E

C T

N U

M B

E R

C O

N S

T R

U C

T

IO

N D

O C

U M

E N

T S

E di t

KEYNOTES

1 EXISTING PIPES CONTINUE TO MANIFOLD. EACH LOOP SHALL BE BALANCED AS

NOTED: B&C HALL LOOP - 122 GPM, CONF & LOBBY - 60 GPM, D HALL - 26 GPM.

2 PIPES CONTINUE TO EXISTING EQUIPMENT IN BOILER ROOM.

3 HYDRONIC PIPING TO BE DRAINED AND REFILLED.

4 REPLACE DIFFERENTIAL PRESSURE SENSORS. IF, UPON INSPECTION, THEY ARE

IN GOOD CONDITION, THE EXISTING CAN REMAIN.

5 REPLACE TEMPERATURE SENSOR AT BOILER SUPPLY.

6 REPLACE TEMPERATURE SENSOR AT BOILER RETURN.

7 REPLACE TEMPERATURE SENSOR AT HYDRONIC LOOP SUPPLY.

8 REPLACE TEMPERATURE SENSOR ON HYDRONIC LOOP RETURN.

9 REPLACE TEMPERATURE SENSORS ON COOLING TOWER LOOP SUPPLY AND

RETURN.

10 HYDRONIC LOOP RETURN MANIFOLD.

11 HYDRONIC LOOP SUPPLY MANIFOLD.

12 HYDRONIC PIPING CONTINUES TO ADMINISTRATION AREA BUT DOES NOT SERVE

MORE EQUIPMENT.

13 CLEAN ALL STRAINERS IN HYDRONIC SYSTEM.

14 PROVIDE NEW BYPASS ON HYDRONIC LOOP. BALANCING VALVE TO BE SET TO 15

GPM.

15 PROVIDE NEW BYPASS ON HYDRONIC LOOP. BALANCING VALVE TO BE SET TO 10

GPM.

16 PROVIDE NEW BYPASS ON HYDRONIC LOOP. BALANCING VALVE TO BE SET TO 5

GPM.

17 PROVIDE NEW BYPASS IN HYDRONIC LOOP. BALANCING VALVE TO BE SET TO 9

GPM.

18 NEW MAU TO CONNECT TO EXISTING GAS PIPES.

19 AFTER BY-PASS VALVES HAVE BEEN ADDED AND LOOPS BALANCED, ACTUATOR

VALVE AT HEAT PUMP SHALL BE REPLACED.

1/16" = 1'-0"M111

1 LEVEL 1 MECHANICAL PIPING PLAN

1/4" = 1'-0"M111

3 BOILER ROOM ENLARGED VIEW

REVISIONS

MARK DATE DESCRIPTION

1 9/22/202

Addendum #1

L I C

E N

S E

D

PROFESS I ONAL

E N

G I N

E E

R

No. 190991

S

T A T E O F U T A

H

BENJAMIN L.

DAVIS

Project #: 260404

T H

IS

S

H E

E T

IS

IN

T E

D E

D T

O B

E P

R

IN

T E

D

IN

C O

L O

R

PROJECT NO:

DRAWN BY:

CHK'D BY:

DATE:

T H

IS

P

R

IN

T

IS

IN

C

O L

O R

A

BCDEFGHIJKLMN

ABCDEFGHIJKLMN

30x42

Stamp

9/

/2

9:

:4

A

M A ut od es k

D oc s:

//U

B T

E C

H R oo se ve lt

M A

U R ep la ce m en t/2

U

B T

E C

H R oo se ve lt

M A

U R ep la ce m en t_

M E

C H

_v

.rv t

JULY 10, 2026

MECHANICAL

PICTURES

M401

U B

T E

C H

R oo se ve lt M

A U

R e pl a ce m e nt

U B

T E

C H

R o o s e v e lt M

A U

R e p la c e m e n t

E a s t L a g o o n S tr e e t R o o s e v e lt U

T

D F

C M

P R

O J E

C T

N U

M B

E R

C O

N S

T R

U C

T

IO

N D

O C

U M

E N

T S

E di t

REVISIONS

MARK DATE DESCRIPTION

1 9/22/202

Addendum #1

EXAMPLE OF OUTSIDE AIR DUCT WITHOUT DAMPER.

DAMPER NEEDS TO BE ADDED.

REFER TO M101 FOR NOTES WHERE THIS CONDITION APPLIES.

EXAMPLE OF HOLE WITHOUT OUTSIDE AIR DUCT.

DUCT AND DAMPER NEEDS TO BE ADDED.

REFER TO M101 FOR NOTES WHERE THIS CONDITION APPLIES.

EXAMPLE OF OUTSIDE AIR DUCT WITH DAMPER.

DAMPER NEEDS TO BE INSPECTED AND VERIFY

THAT IT CAN BALANCE THE AIRFLOW.

REFER TO M101 FOR NOTES WHERE THIS CONDITION APPLIES.

L I C

E N

S E

D

PROFESS I ONAL

E N

G I N

E E

R

No. 190991

S

T A T E O F U T A

H

BENJAMIN L.

DAVIS

Project #: 260404

T H

IS

S

H E

E T

IS

IN

T E

D E

D T

O B

E P

R

IN

T E

D

IN

C O

L O

R

PROJECT NO:

DRAWN BY:

CHK'D BY:

DATE:

T H

IS

P

R

IN

T

IS

IN

C

O L

O R

A

BCDEFGHIJKLMN

ABCDEFGHIJKLMN

30x42

Stamp

9/

/2

9:

:4

A

M A ut od es k

D oc s:

//U

B T

E C

H R oo se ve lt

M A

U R ep la ce m en t/2

U

B T

E C

H R oo se ve lt

M A

U R ep la ce m en t_

M E

C H

_v

.rv t

JULY 10, 2026

MECHANICAL

SCHEDULES

M601

U B

T E

C H

R oo se ve lt M

A U

R e pl a ce m e nt

U B

T E

C H

R o o s e v e lt M

A U

R e p la c e m e n t

E a s t L a g o o n S tr e e t R o o s e v e lt U

T

D F

C M

P R

O J E

C T

N U

M B

E R

C O

N S

T R

U C

T

IO

N D

O C

U M

E N

T S

E di t

SUMMER COOLING 97.4/61.9/13.8

UBTECH HEAT PUMP REPLACEMENT ROOSEVELT, UTAH 84066 WINTER HEATING -20/-21.2/10 5280

NAME LOCATION SCENARIO (°F/°F/%) (FT) NOTES

DB/WB/RH ALTITUDE

OUTSIDE AIR

PROJECT SCHEDULE

2. CONTRACTOR TO PROVIDE OUTSIDE AIR FLOW MEASURING STATION.

1. PROVIDE 14" CURB BELOW UNIT.

MAU-4 GREENHECK RV-40-5L-J-E2 ROOF 2287 0.01 224200 -20/-21.22 -20/72 NAT GAS 49100 97.4/61.9 97.4/61.9 72/53.4 R-454B MERV 8 32.3 1 208/3/60 1-2

MAU-3 GREENHECK RV-40-5L-J-E2 ROOF 2624 0.01 257100 -20/-21.22 -20/72 NAT GAS 56300 97.4/61.9 97.4/61.9 72/53.4 R-454B MERV 8 32.3 1 208/3/60 1-2

MAU-2 GREENHECK RV-40-5L-J-E2 ROOF 2383 0.01 233500 -20/-21.22 -20/72 NAT GAS 51200 97.4/61.9 97.4/61.9 72/53.4 R-454B MERV 8 32.3 1 208/3/60 1-2

MAU-1 GREENHECK RV-20-3L-3-E2 ROOF 1103 0.01 108100 -20/-21.22 -20/72 NAT GAS 23700 97.4/61.9 97.4/61.9 72/53.4 R-454B MERV 8 18.6 0.5 208/3/60 1-2

ID MODEL NUMBER LOCATION (CFM) (IN. H2O) (BTU/H) (°F) (°F) MEDIUM (BTU/H) (°F) (°F) (°F) MEDIUM FILTR. MCA (HP) VOLT/PH/HZ NOTES

AND RATE PRESSURE LOAD DB/WB AIR TEMP. LOAD DB/WB DB/WB DB/WB TOTAL MOTOR POINT

MANUFACTURER AIRFLOW STATIC HEATING TEMP. LEAVING COOLING TEMP. AIR TEMP. AIR TEMP. FAN SINGLE

EXTERNAL AMBIENT ENTERING/ AMBIENT ENTERING LEAVING SUPPLY

SUPPLY FAN HEATING COIL SECTION COOLING COIL SECTION FILTER ELECTRICAL

PACKAGED CUSTOM ROOFTOP UNIT SCHEDULE

1. PROVIDE WITH A 12:1 TURNDOW MODULATING GAS HEAT CONTROL.

HC-MAU-4 GREENHECK MAU-4 HEATING 2287 224200 -20/-21.2 72/41.9 0.25 280200 330 850 1 67/45 20.9 1

HC-MAU-3 GREENHECK MAU-3 HEATING 2624 257100 -20/-21.2 72/41.9 0.25 321400 378 850 1 67/45 20.9 1

HC-MAU-2 GREENHECK MAU-2 HEATING 2383 233500 -20/-21.2 72/41.9 0.25 291900 343 850 1 67/45 20.9 1

HC-MAU-1 GREENHECK MAU-1 HEATING 1103 108100 -20/-21.2 72/41.9 0.25 135100 159 850 1 25/42 7.3 1

ID MODEL NUMBER LOCATION USAGE (CFM) (BTU/H) (°F) (°F) (IN. H2O) (BTU/H) (CFH) (BTU/FT³) COILS (IN) (FT²) NOTES

AND RATE LOAD DB/WB DB/WB PRESSURE LOAD FLOW VALUE NO. HEIGHT AREA

MANUFACTURER AIRFLOW TEMP. TEMP. STATIC INPUT INPUT HEATING WIDTH/ FACE

ENTERING LEAVING MINIMUM MINIMUM COIL FIN MINIMUM

EACH

AIR NATURAL GAS PHYSICAL

CUSTOM ROOFTOP UNIT NATURAL GAS COIL SCHEDULE

CC-MAU-4 GREENHECK MAU-4 COOLING 2287 49100 48600 97.4/61.9 72/53.4 0.75 R-454B 10 1 67/45 20.9 8/8

CC-MAU-3 GREENHECK MAU-3 COOLING 2624 56300 55700 97.4/61.9 72/53.4 0.75 R-454B 10 1 67/45 20.9 8/8

CC-MAU-2 GREENHECK MAU-2 COOLING 2383 51200 50600 97.4/61.9 72/53.4 0.75 R-454B 10 1 67/45 20.9 8/8

CC-MAU-1 GREENHECK MAU-1 COOLING 1103 23700 23400 97.4/61.9 72/53.4 0.75 R-454B 10 1 25/42 7.3 8/8

ID MODEL NUMBER LOCATION USAGE (CFM) (BTU/H) (BTU/H) (°F) (°F) (IN. H2O) MEDIUM EER COILS (IN) (FT²) INCH NOTES

AND RATE LOAD LOAD DB/WB DB/WB PRESSURE NO. HEIGHT AREA FINS PER

MANUFACTURER AIRFLOW SENSIBLE TEMP. TEMP. STATIC WIDTH/ FACE ROWS/

ENTERING LEAVING COIL FIN MINIMUM NO.

EACH MINIMUM

AIR PACKAGED REFRIGERANT PHYSICAL

CUSTOM ROOFTOP UNIT PACKAGED CONDENSING UNIT COIL SCHEDULE

OF-MAU-4 GREENHECK MAU-4 1 FORWARD CURVED 2287 1.73 0.01 72 1175 28 70 1 1150 208/3/60

OF-MAU-3 GREENHECK MAU-3 1 FORWARD CURVED 2624 1.73 0.01 72 1279 28 70 1 1750 208/3/60

OF-MAU-2 GREENHECK MAU-2 1 FORWARD CURVED 2383 1.73 0.01 72 1220 70 1 1750 208/3/60

OF-MAU-1 GREENHECK MAU-1 1 FORWARD CURVED 1103 1.73 0.01 72 1377 24 70 0.5 1750 208/3/60

ID MODEL NUMBER LOCATION QTY TYPE (CFM) (IN. H2O) (IN. H2O) (°F) (RPM) (IN) (%) (HP) (RPM) VOLT/PH/HZ NOTES

AND RATE PRESSURE PRESSURE TEMP. SPEED DIA. EFF. SIZE SPEED

MANUFACTURER AIRFLOW STATIC STATIC AIR FAN WHEEL STATIC MOTOR MOTOR

MAXIMUM TOTAL EXTERNAL MAX FAN

AIR FAN ELECTRICAL

CUSTOM ROOFTOP UNIT OUTSIDE AIR FAN SCHEDULE

PICV-IHCL-5

GRISWOLD PICV0S

1/2" 7

IHCL-5 SS BALL NONE NONE 10 13.84 6.8 24/1/60 0.5

PICV-IHCL-4

GRISWOLD PICV0S

1/2" 7

IHCL-4 SS BALL NONE NONE 6 6.91 4.1 24/1/60 0.5

PICV-IHCL-3

GRISWOLD PICV0S

1/2" 4

IHCL-3 SS BALL NONE NONE 3 13.82 2 24/1/60 0.5

PICV-IHCL-2

GRISWOLD PICV0S

3/4" 9

IHCL-2 SS BALL NONE NONE 12 13.82 8.2 24/1/60 0.75

PICV-IHCL-1

GRISWOLD PICV0S

3/4" 11

IHCL-1 SS BALL NONE NONE 10 13.82 6.8 24/1/60 0.75

ID MODEL NUMBER LOCATION TYPE ACTUATOR SIGNAL (GPM) (FT) CV VOLT/PH/HZ (IN) NOTES

AND INPUT RATE LOSS SIZE

MANUFACTURER FLOW HEAD CONNECT

FLUID ELECTRICAL PHYSICAL

PRESSURE INDEPENDENT CONTROL VALVE SCHEDULE

REVISIONS

MARK DATE DESCRIPTION

1 9/22/202

Addendum #1

H X

-1

H/CHWS TO HEAT PUMPS

H/CHWR FROM HEAT

PUMPS

Δ P

H

IG

H

LO

W

VFD

VFD DO P-4-VFD-S/S

T

T

T T

T

T

T

T

T

MECHANICAL ROOM

OUTSIDE AIR

BOILER

VENTILATION AIR

DI P-4-VFD-ST

DI P-4-VFD-AL

AO P-4-VFD-SPD

DO P-3-VFD-S/S

DI P-3-VFD-ST

DI P-3-VFD-AL

AO P-3-VFD-SPD

AI TS-HPLS-1

AI TS-SPC-1

AI TS-HWS-1AI TS-HWR-1

AI TS-HPLR-1

AI TS-CTR-1

AI TS-CT-SUMP-1

AI TS-CTS-1

AI TS-OA-1

AI DP-HPL-1

AI DP-HPL-2

AI DP-HPL-3

DO B-1-S/S

DI B-1-AL

AO B-1-SIG

DO B-2-S/S

DI B-2-AL

AO B-2-SIG

DO P-5-VFD-S/S

DI P-5-VFD-ST

DO P-6-VFD-S/S

DI P-6-VFD-ST

AO DM-OA-1

VFD

DO P-1-S/S

DI P-1-ST

DO P-2-S/S

DI P-2-ST

DO CT-1-F-VFD-S/S

DO CT-1-FILT-S/S

DI CT-1-F-VFD-ST

DI CT-1-FILT-ST

DI CT-1-F-VFD-AL

DO CT-1-DRAIN

AO CT-1-F-VFD-SPD

VFD

VFD

AO P-5-VFD-SPD

H/CHWS TO HEAT PUMPS

H/CHWR FROM HEAT

PUMPS

Δ P

H

IG

H

LO

W

H/CHWS TO HEAT PUMPS

H/CHWR FROM HEAT

PUMPS

Δ P

H

IG

H

LO

W

2 2

AO P-6-VFD-SPD

OUTSIDE AIR

DX GH

SUPPLY AIR TO

HEAT PUMPS

T

ΔP

HIGH LOW

DUCT STATIC

DUCT

REFERENCE

AI TS-OA-1

VFD

DO SF-1-VFD-S/S

DI SF-1-VFD-ST

DI SF-1-VFD-AL

AI GH-1-STAI DX-1-ST

T

AI TS-CC-1

T

AI TS-SA-1

AI SD-SP-1

PACKAGED MAU

DO MAU-1-S/S

AO MAU-1-SIG

DI MAU-1-ST

DI MAU-1-AL

AO SF-1-VFD-SPD

AO GH-1-SIGAO DX-1-SIG

ΔP

HIGH LOW

AI DP-FILT-1

AI FLOW-OA-1

AO DM-OA-1

HIGHLOW

DI HSPS-DUCT-1

L I C

E N

S E

D

PROFESS I ONAL

E N

G I N

E E

R

No. 190991

S

T A T E O F U T A

H

BENJAMIN L.

DAVIS

Project #: 260404

T H

IS

S

H E

E T

IS

IN

T E

D E

D T

O B

E P

R

IN

T E

D

IN

C O

L O

R

PROJECT NO:

DRAWN BY:

CHK'D BY:

DATE:

T H

IS

P

R

IN

T

IS

IN

C

O L

O R

A

BCDEFGHIJKLMN

ABCDEFGHIJKLMN

30x42

Stamp

9/

/2

9:

:4

A

M A ut od es k

D oc s:

//U

B T

E C

H R oo se ve lt

M A

U R ep la ce m en t/2

U

B T

E C

H R oo se ve lt

M A

U R ep la ce m en t_

M E

C H

_v

.rv t

JULY 10, 2026

MECHANICAL

CONTROLS

MI701

U B

T E

C H

R oo se ve lt M

A U

R e pl a ce m e nt

U B

T E

C H

R o o s e v e lt M

A U

R e p la c e m e n t

E a s t L a g o o n S tr e e t R o o s e v e lt U

T

D F

C M

P R

O J E

C T

N U

M B

E R

C O

N S

T R

U C

T

IO

N D

O C

U M

E N

T S

E di t

NOT TO SCALEMI701

2 MAU INSTRUMENTATION DIAGRAM

2. THE CONTRACTOR IS RESPONSIBLE FOR ALL FINAL QUANTITIES AND COUNTS OF SENSORS AND NUMBER OF POINTS. IN ANY DISCREPANCY, THE CONTRACTOR SHALL

IMMEDIATELY NOTIFY THE DESIGN TEAM AND SHALL BID THE HIGHER VALUE.

1. THE CONTRACTOR SHALL SUPPLY ANY ADDITIONAL SENSORS, HARDWARE, AND POINTS NECESSARY TO MEET THE REQUIREMENTS IN THE SPECIFICATION AND

SEQUENCE OF OPERATIONS.

NOTES:

MAKEUP AIR UNIT INSTRUMENTATION SCHEDULE

IO Point ID IO Description GUI Alarm Log Point

ANALOG INPUT

DP-HPL-1 HEAT PUMP LOOP DIFFERENTIAL PRESSURE X X

DP-HPL-2 HEAT PUMP LOOP DIFFERENTIAL PRESSURE X X

DP-HPL-3 HEAT PUMP LOOP DIFFERENTIAL PRESSURE X X

TS-CT-SUMP-1 COOLING TOWER SUMP TEMPERATURE SENSOR X X

TS-CTR-1 COOLING TOWER RETURN TEMPERATURE SENSOR X X

TS-CTS-1 COOLING TOWER SUPPLY TEMPERATURE SENSOR X X

TS-HPLR-1 HEAT PUMP LOOP RETURN TEMPERATURE SENSOR X X

TS-HPLS-1 HEAT PUMP LOOP SUPPLY TEMPERATURE SENSOR X X

TS-HWR-1 HOT WATER SUPPLY TEMPERATURE X X

TS-HWS-1 HOT WATER SUPPLY TEMPERATURE SENSOR X X

TS-OA-1 OUTSIDE AIR TEMPERATURE SENSOR X X

TS-SPC-1 SPACE AIR TEMPERATURE SENSOR X X

ANALOG INPUT: 12

ANALOG OUTPUT

B-1-SIG BOILER SIGNAL X X

B-2-SIG BOILER SIGNAL X X

CT-1-F-VFD-SPD COOLING TOWER FAN SPEED X X

DM-OA-1 BOILER ROOM VENTILATION DAMPER X X

P-3-VFD-SPD PUMP SPEED X X

P-4-VFD-SPD PUMP SPEED X X

P-5-VFD-SPD PUMP SPEED X X

P-6-VFD-SPD PUMP SPEED X X

ANALOG OUTPUT: 8

DIGITAL INPUT

B-1-AL BOILER ALARM X X X

B-2-AL BOILER ALARM X X X

CT-1-F-VFD-AL COOLING TOWER FAN ALARM X X X

CT-1-F-VFD-ST COOLING TOWER FAN STATUS X X X

CT-1-FILT-ST COOLING TOWER FILTER STATUS X X X

P-1-ST PUMP STATUS X X X

P-2-ST PUMP STATUS X X X

P-3-VFD-AL PUMP ALARM X X X

P-3-VFD-ST PUMP STATUS X X X

P-4-VFD-AL PUMP ALARM X X X

P-4-VFD-ST PUMP STATUS X X X

P-5-VFD-ST PUMP STATUS X X X

P-6-VFD-ST PUMP STATUS X X X

DIGITAL INPUT: 13

DIGITAL OUTPUT

B-1-S/S BOILER START / STOP X X

B-2-S/S BOILER START / STOP X X

CT-1-DRAIN COOLING TOWER DRAIN X X

CT-1-F-VFD-S/S COOLING TOWER FAN START / STOP X X

CT-1-FILT-S/S COOLING TOWER FILER START / STOP X X

P-1-S/S PUMP START / STOP X X

P-2-S/S PUMP START / STOP X X

P-3-VFD-S/S PUMP START / STOP X X

P-4-VFD-S/S PUMP START / STOP X X

P-5-VFD-S/S PUMP START / STOP X X

P-6-VFD-S/S PUMP START / STOP X X

DIGITAL OUTPUT: 11

Grand total: 44

NOT TO SCALEMI701

1 HYDRONIC HEATING/COOLING INSTRUMENTATION DIAGRAM

KEYNOTES

1 ALL COMPONENTS SHOWN ON THIS DIAGRAM ARE EXISTING, INCLUDING CONTROLLER THAT IS NOT

SHOWN. CONTRACTOR TO VALIDATE COMPONENT PRESENCE AND FUNCTIONALITY.

2 NEW TEMPERATURE SENSOR. REUSE EXISTING CONTROLLER.

3 CONTRACTOR TO PROVIDE OUTSIDE AIR FLOW MEASURING STATION.

2. THE CONTRACTOR IS RESPONSIBLE FOR ALL FINAL QUANTITIES AND COUNTS OF SENSORS AND NUMBER OF POINTS. IN ANY DISCREPANCY, THE CONTRACTOR SHALL

IMMEDIATELY NOTIFY THE DESIGN TEAM AND SHALL BID THE HIGHER VALUE.

1. THE CONTRACTOR SHALL SUPPLY ANY ADDITIONAL SENSORS, HARDWARE, AND POINTS NECESSARY TO MEET THE REQUIREMENTS IN THE SPECIFICATION AND

SEQUENCE OF OPERATIONS.

NOTES:

MAKEUP AIR UNIT INSTRUMENTATION SCHEDULE

IO Point ID IO Description GUI Alarm Log Point

ANALOG INPUT

DP-FILT-1 FILTER DIFFERENTIAL PRESSURE SENSOR X X

DX-1-ST DX COOLING STATUS X X

DX-1-ST DX COOLING STATUS X X

FLOW-OA-1 OUTSIDE AIR FLOW STATION X X

GH-1-ST GAS HEAT STATUS X X

GH-1-ST GAS HEAT STATUS X X

SD-SP-1 SUPPLY DUCT STATIC PRESSURE X X

SD-SP-1 SUPPLY DUCT STATIC PRESSURE X X

TS-CC-1 COOLING COIL TEMPERATURE SENSOR X X

TS-CC-1 COOLING COIL TEMPERATURE SENSOR X X

TS-OA-1 OUTSIDE AIR TEMPERATURE SENSOR X X

TS-OA-1 OUTSIDE AIR TEMPERATURE SENSOR X X

TS-SA-1 SUPPLY AIR TEMPERATURE SENSOR X X

TS-SA-1 SUPPLY AIR TEMPERATURE SENSOR X X

ANALOG INPUT: 14

ANALOG OUTPUT

DM-OA-1 OUTSIDE AIR DAMPER X X

DX-1-SIG DX COOLING SIGNAL X X

DX-1-SIG DX COOLING SIGNAL X X

GH-1-SIG GAS HEAT SIGNAL X X

GH-1-SIG GAS HEAT SIGNAL X X

MAU-1-SIG MAKEUP AIR PACKAGED UNIT SIGNAL X X

MAU-1-SIG MAKEUP AIR PACKAGED UNIT SIGNAL X X

SF-1-VFD-SPD SUPPLY FAN SPEED X X

SF-1-VFD-SPD SUPPLY FAN SPEED X X

ANALOG OUTPUT: 9

DIGITAL INPUT

HSPS-DUCT-1 HIGH STATIC PRESSURE SWITCH X X X

MAU-1-AL MAKEUP AIR PACKAGED UNIT ALARM X X X

MAU-1-AL MAKEUP AIR PACKAGED UNIT ALARM X X X

MAU-1-ST MAKEUP AIR PACKAGED UNIT STATUS X X X

MAU-1-ST MAKEUP AIR PACKAGED UNIT STATUS X X X

SF-1-VFD-AL SUPPLY FAN ALARM X X X

SF-1-VFD-AL SUPPLY FAN ALARM X X X

SF-1-VFD-ST SUPPLY FAN STATUS X X X

SF-1-VFD-ST SUPPLY FAN STATUS X X X

DIGITAL INPUT: 9

DIGITAL OUTPUT

MAU-1-S/S MAKEUP AIR PACKAGED UNIT START / STOP X X

MAU-1-S/S MAKEUP AIR PACKAGED UNIT START / STOP X X

SF-1-VFD-S/S SUPPLY FAN START / STOP X X

SF-1-VFD-S/S SUPPLY FAN START / STOP X X

DIGITAL OUTPUT: 4

Grand total: 36

REVISIONS

MARK DATE DESCRIPTION

1 9/22/202

Addendum #1