Material Sub. 2001 Foam insolation.pdf

This is a product specification and technical information document for ES-Foam I polyisocyanurate roof insulation manufactured by Energy Solutions Insulation, Inc., located in Saginaw, Michigan.

ES-Foam I is a polyisocyanurate insulation board designed for single-ply, elastomeric, and non-bitumen mopped roofing systems in commercial, industrial, and residential applications. The product is available in thicknesses ranging from 0.5 inches to 4 inches, with standard board dimensions of 4' x 4' or 4' x 8', and custom sizes up to 12' lengths available upon request. The insulation features a minimum R-value requirement that varies by thickness, with values ranging from 3.0 to 30.0 per inch, and meets specific physical property standards including compressive strength of 20 psi (138 kPa), dimensional stability of 2 percent maximum, water absorption less than 1 percent by volume, and tensile strength of 500 psf (24 kPa). The product holds UL classifications (UL 1256 and UL 790) and Factory Mutual approval. Installation methods include mechanical attachment, full adhesion, or ballasted applications, with specific fastening requirements of at least one fastener per four square feet for mechanically attached installations. All installations must comply with manufacturer specifications, applicable codes, and insurance requirements. Storage must protect the material from moisture and inclement weather, with delivery provided in original unopened packaging labeled with manufacturer information and product identification.