Appendix F- Unpriced Bill of Quantities.xlsx

Cover

BILLS OF QUANTITIES

&P of &N

Preliminaries

GENERAL PRELIMINARIES USD

A. PRICING OF ITEMS OF PRELIMINARIES AND PREAMBLES

Wherever in the Contractor’s priced Bills of Quantities no price appears against an item of Preliminaries or Preambles, the value of such item shall be deemed to be included in his prices for other items in the bills of Quantities.

B. ABBREVIATIONS AND DEFINITIONS

Throughout these Bills, units of measurement and terms are abbreviated and shall be interpreted as follows:

mm Shall mean millimetre lm shall mean linear metre sm shall mean square metre kg shall mean kilogramme

no. shall mean number

C. ABBREVIATIONS AND DEFINITIONS (CONTD.)

‘As described’ shall mean as described in these Bills of Quantities.

‘As before described’ shall mean in all respects as described in a previous item.

“Approved” Shall mean approved by USAID

“As directed” Shall mean as directed by USAID

D. PROJECT EXECUTION SCHEDULE (PES)

The Contractor shall allow for providing, within two weeks of the date for possession of the site and in agreement with USAID a “Programme of Works” for the whole of the works, in such form and details as USAID shall reasonably describe. One copy shall be forwarded to USAID and a further copy shall be retained on the site on which the progress shall be recorded by the Contractor. Should any circumstances arise affecting the programme or progress, the programme shall be modified as necessary and USAID informed. - 0

E. CONSTRUCTION ACCIDENT PREVENTION PLAN (CAPP)

The contractor shall develop a detailed accident prevention plan for all the works associated with the contract thereof. - 0

Ditto for Fall protection and Prevention Plan (Part of CAPP) - 0

Ditto for Heat Stress Plan (Part of CAPP) - 0

Ditto for Activity Hazard Analysis (Part of CAPP) - 0

Ditto for general Emergency Plan (Part of CAPP) - 0

F. PLANT, TOOLS AND VEHICLES

Allow for providing all scaffolding, plant, tools and vehicles required for the works except insofar as may be stated otherwise herein and except for such items specifically and only required for the use of the nominated sub-contractors as described herein. No timber used for scaffolding, formwork or temporary works of any kind shall be used afterwards in the permanent work. - 0

G. TRANSPORT

Allow for transportation of workmen, materials, etc. to and from the site at such hours and by such routes as may be permitted by the competent authorities. - 0

H MATERIALS AND WORKMANSHIP

I STORAGE OF MATERIALS

The Contractor shall provide at his own risk and cost where directed on the site weatherproof lockup sheds for the safe storage and custody of materials for the works and for the use of workmen engaged thereon and shall remove such sheds make good damaging or disturbed surfaces upon completion to the satisfaction of USAID. - 0

J EXISTING PROPERTY

The Contractor shall take every precaution to avoid damage to all existing property including roads, cables, trees & shrubs , plants, drains and other services, and he will be held responsible for and shall make good all such damage arising from the execution of this contract at his own expense to the satisfaction of USAID. - 0

K WATER AND ELECTRICITY SUPPLY FOR THE WORKS

The Contractor shall provide at his own risk and cost all necessary water, electric light and power required for use in the works. - 0

L INSURANCE

The Contractor shall insure as required in conditions of the Contract. - 0

M QUALITY CONTROL PLAN

The Contractor shall develop a detailed quality management plan and quality check forms for all the items as stipulated in the Bill of Quantities. - 0

N REMOVAL OF RUBBISH, etc.

Remove all rubbish and debris from the buildings and site as it accumulates and at completion of the works and remove all plant, scaffolding and unused materials at completion. - 0

&"-,Italic"GPTech / Liberty Engineering and Construction Ltd. Prelims-&P &P of &N

Demolitions_Cover

DEMOLITIONS

Demolitions

the property of USAID. The materials shall be transported/stored as per USAID's directives and all remaining debris shall be removed from site by the Contractor.

A Remove existing aluminium doors overall size 880 x 2260mm complete with frame and ironmongery 1.00 no - 0 - 0

B Ditto but size, 900 x 1950mm 1.00 no - 0 - 0

C Ditto but size, 790 x 1950mm 2.00 no - 0 - 0

D Ditto but size, 820 x 1950mm 2.00 no - 0 - 0

E Ditto but size, 820 x 1950mm 1.00 no - 0 - 0

F Remove existing wooden doors overall size 870 x 1790mm complete with frame and ironmongery 5.00 no - 0 - 0

G Remove existing glazing and aluminium panels in the steel windows overall size 570 x 1200mm complete with frame and ironmongery 1.00 no - 0 - 0

H Ditto, Size 3200 x 600mm 2.00 no - 0 - 0

I Remove existing plywood ceiling including lights where they occur complete with wiring and piping. 48.05 sm - 0 - 0

J Remove existing suspended gypsum ceiling in decorative 600mm x 600mm wide including lights where they occur complete with wiring and piping . 26.10 sm - 0 - 0

K Remove existing 330 x 330 ceramic floor tiles including 50mm thick floor screed base and existing skirting and make good all disturbed areas in preparation for installation of new floor screed and tiles (measured separately) 30.53 sm - 0 - 0

L Ditto but size, 300 x 300 38.04 sm - 0 - 0

M Remove existing 200 x 300 ceramic wall tiles including 50mm thick floor screed base and existing skirting and make good all disturbed areas in preparation for installation of new floor screed and tiles (measured separately) 109.61 sm - 0 - 0

N Remove existing roofing sheets from the entire building including the roof truss members (measured separately) 150.52 sm - 0 - 0

O Remove all the existing steel roof trusses from the entire facility. 1.00 ls - 0 - 0

P Removal all the extract fans 5.00 no - 0 - 0

Q Remove existing sanitary fittings from existing washrooms: Wash hand basin - 4no.; Water closet, complete - 5 no. ; Urinals -4no .; Shower heads - 6no.; Floor trap - 8no.; Hand dryer - 1no.; Air freshner - 2no.; Soap dispensors -1no. 1.00 Ls - 0 - 0

ELEMENT NO.1 - SUB TOTAL - 0

A Remove existing aluminium doors overall size 880 x 2260mm complete with frame and ironmongery 1.00 no - 0 - 0

B Ditto but Size, 880 x 1990mm 1.00 no - 0 - 0

C Remove existing wooden doors overall size 870 x 1990mm complete with frame and ironmongery 3.00 no - 0 - 0

D Ditto but Size, 850 x 1990mm 1.00 no - 0 - 0

E Ditto but Size, 800 x 1990mm 1.00 no - 0 - 0

F Remove glazing and aluminium panels in the steel windows overall size 600 x 1200mm complete with frame and ironmongery 1.00 no - 0 - 0

G Ditto but Size, 3170 x 580mm 1.00 no - 0 - 0

H Ditto but Size, 3180 x 600mm 1.00 no - 0 - 0

I Remove existing suspended gypsum ceiling in decorative 600mm x 600mm wide including lights where they occur complete with wiring and piping . 25.92 sm - 0 - 0

J Remove existing 300 x 300 ceramic floor tiles including 50mm thick floor screed base and existing skirting and make good all distrubed areas in preparation for installation of new floor screed and tiles (measured separately) 22.55 sm - 0 - 0

K Remove existing 300 x 200 ceramic wall tiles including 50mm thick floor screed base and existing skirting and make good all distrubed areas in preparation for installation of new floor screed and tiles (measured separately) 58.71 sm - 0 - 0

L Removal all the extract fans 2.00 no - 0 - 0

M Remove existing sanitary fittings from existing washrooms: Wash hand basin - 2no.; Water closet, complete - 3 no. .; Shower heads - 2no.; Floor trap - 4no.; Hand dryer - 1no.; Air freshner - 1no.; Soap dispensors -1no. and dispose off as directed on site. 1.00 Ls - 0 - 0

ELEMENT NO.2 - SUB TOTAL - 0

TOTAL FOR DEMOLITIONS & DOWNTAKINGS CARRIED TO GRAND SUMMARY - 0

&"-,Italic"GPTech / Liberty Engineering and Construction Ltd. Demolitions-&P

Reno-Cover

Renovations

ITEM DESCRIPTION Qty Unit Rate (USD) Amount (USD)

MEN'S BATHROOMS

ELEMENT NO. 1

DOORS

Aluminium Doors

A 880 x 2260 mm high anodized aluminium door in standard aluminium sections to approval hung to and including 100 x 50 x 2mm thick powder coated aluminium plugged frame all round: Frame comprising of 300mm high transome with 6mm clear glass while leaf comprising of 780 x 980mm top aluminium plates and 780 x 980mm bottom aluminium plates separated by 1No. transome including aluminium glazing beads. Cost to include door stopper, 'King' door closers, 300mm stainless steel door pull handle, locking system and other necessary accessories. 1.00 no - 0 - 0

B 900 x 1950 mm high anodized aluminium door in standard aluminium sections to approval hung to and including 100 x 50 x 2mm thick powder coated aluminium plugged frame all round: leaf divided into 2 parts comprising 800 x 600mm top panel with 6mm thick obscure sheet glass; 800 x 1000mm bottom aluminium plates separated by 1No. transome including aluminium glazing beads. Door leaf to be at +0.1m above finished floor level. Cost to include locking system and other necessary iron mongeries. 1.00 no - 0 - 0

C Ditto but Size; 790x 1950 mm 2.00 no - 0 - 0

D Ditto but Size; 860x 1950 mm 6.00 no - 0 - 0

E Ditto but Size; 820x 1950 mm 2.00 no - 0 - 0

TOTAL CARRIED TO SUMMARY OF BILL NO.1 - 0

ELEMENT NO. 2

WINDOWS

Steel windows

Supply and install 6mm thick clear sheet glass and glazing with glass putty to existing steel frame (m/s). Cost to include replacements of lugs, hinges, window stays, handles where necessary Note

A 570 x 850mm high window comprising fixed and openable sash. 1.00 no - 0 - 0

B Ditto but 600 x 3200mm 2.00 no - 0 - 0

TOTAL CARRIED TO SUMMARY OF BILL NO.1 - 0

ELEMENT NO. 3

UNDER COUNTER WALL

Wall finishes

Cement/sand (1:3) in:

A 15mm thick render prepared to receive new wall finish (m/s) 5.58 sm - 0 - 0

'SAJ' ceramic Granito wall tiles or other equal and approved

B 330 x 330 x 6mm thick tiles fixed with an approved adhesive on prepared render (m/s) 5.58 sm - 0 - 0

Louvered door

C 440 x 830 mm high anodized aluminium louvered door in standard aluminium sections to approval hung to and including 100 x 50 x 2mm thick powder coated aluminium plugged frame all round 0.73 sm - 0 - 0

TOTAL CARRIED TO SUMMARY OF BILL NO.1 - 0

ELEMENT NO. 4

FINISHES

FLOOR FINISHES

Cement and sand (1:3) in

A 30mm thick screed finished to receive ceramic tiles (m/s) 68.57 sm - 0 - 0

'SAJ' ceramic Granito floor tiles or other equal and approved

B 330 x 330 x 6mm thick tiles fixed with approved adhesive 68.57 sm - 0 - 0

C 100 x 6mm skirting with rounded top; including labour for cutting and raking ceramic tiles 32.55 lm - 0 - 0

Carried to Collection - 0

WALL FINISHES

Cement/sand (1:3) in:

A 15mm thick render prepared to receive ceramic tiles internally (m/s) 109.61 sm - 0 - 0

'SAJ' ceramic Granito wall tiles or other equal and approved

B 330 x 330 x 6mm thick tiles fixed with an approved adhesive to prepared surfaces. 109.61 sm - 0 - 0

Internal Painting to all gent bathrooms

C Scrap off all visible flakes, blisters and open all hairline cracks, fill with appropriate or equally approved filler to all internal wall surfaces ready to receive new paint. 169.15 sm - 0 - 0

D Apply one undercoat and two finishing coats of 1st grade silk vinyl paint of approved colour to all internal walls 169.15 sm - 0 - 0

Carried to Collection - 0

CEILING FINISHES

Acoustic ceiling

A Gypsum PVC laminated tiles (Dew drop 154) suspended ceiling comprising 600 x 600 x 15mm thick panels, laid on imported concealed ‘Z’ suspension system 500mm below slab, both panels and suspension FIRE RATED and panels to have guaranteed “SOUND ABSORPTION CO-EFFICIENT; or other equal and approved all as supplied an approved supplier 74.15 sm - 0 - 0

Carried to Collection - 0

COLLECTION

FLOOR FINISHES - 0

WALL FINISHES - 0

CEILING FINISHES - 0

TOTAL CARRIED TO SUMMARY OF BILL NO.1 - 0

ELEMENT NO. 5

BATHROOM LOCKER PLATFORM -MEN'S BATHROOM 1

A Supply, mixing and pouring preapproved concrete for the indoor concrete slabs-locker platforms (+0.1m), C25 (1:1:2) with strength not less than 250kg/cm2. Including necessary slopes creation as indicated in the drawings formwork, rubber elastic expansion joints each <5m, vibrating and curing for not less than 14 days. 0.95 cm - 0 - 0

TOTAL CARRIED TO SUMMARY OF BILL NO.1 - 0

WOMEN'S BATHROOM

ELEMENT NO. 1

DOORS

Aluminium Doors

A 880 x 2260 mm high anodized aluminium door in standard aluminium sections to approval hung to and including 100 x 50 x 2mm thick powder coated aluminium plugged frame all round: Frame comprising of 300mm high transome with 6mm clear glass while leaf comprising of 780 x 980mm top aluminium plates and 780 x 980mm bottom aluminium plates separated by 1No. transome including aluminium glazing beads. Cost to include door stopper, 'King' door closers, 300mm stainless steel door pull handle, locking system and other necessary accessories. 1.00 no - 0 - 0

B 880 x 1990 mm high anodized aluminium door in standard aluminium sections to approval hung to and including 100 x 50 x 2mm thick powder coated aluminium plugged frame all round: leaf divided into 2 parts comprising 780 x 600mm top panel with 6mm clear obscure glass;780 x 1000mm bottom aluminium plates separated by 1No. transome including aluminium glazing beads. Door leaf to be at +0.1m above finished floor level. Cost to include locking system and other necessary iron mongeries. 1.00 no - 0 - 0

C Ditto but Size; 870x 1990 mm 4.00 no - 0 - 0

D Ditto but Size; 800x 1990 mm 1.00 no - 0 - 0

TOTAL CARRIED TO SUMMARY OF BILL NO.1 - 0

ELEMENT NO. 2

WINDOWS

Steel windows

Supply and install 6mm thick clear sheet glass and glazing with glass putty to existing steel frame (m/s). Cost to include replacements of lugs, hinges, window stays, handles where necessary

A 600 x 1200mm high window comprising fixed and openable sash 1.00 no - 0 - 0

B Ditto but size, 580 x 3170 mm 1.00 no - 0 - 0

C Ditto but size, 600 x 3180 mm 1.00 no - 0 - 0

TOTAL CARRIED TO SUMMARY OF BILL NO.1 - 0

ELEMENT NO. 3

FINISHES

FLOOR FINISHES

Cement and sand (1:3) in

A 30mm thick screed finished to receive ceramic tiles (m/s) 23.00 sm - 0 - 0

'SAJ' ceramic Granito floor tiles or other equal and approved

B 330 x 330 x 6mm thick tiles fixed with an approved adhesive to prepared surfaces. 23.00 sm - 0 - 0

C 100 x 6mm skirting with rounded top; including labour for cutting and raking ceramic tiles 10.25 lm - 0 - 0

Carried to Collection - 0

WALL FINISHES

Cement/sand (1:3) in:

A 15mm thick render prepared to receive ceramic tiles internally (m/s) 59.00 sm - 0 - 0

'SAJ' ceramic Granito wall tiles or other equal and approved

B 330 x 330 x 6mm thick tiles fixed with an approved adhesive to prepared surfaces. 59.00 sm - 0 - 0

Internal Painting to WOMEN'S Bathroom

C Scrap off all visible flakes, blisters and open all hairline cracks, fill with appropriate or equally approved filler to all internal wall surfaces ready to receive new paint. 52.65 sm - 0 - 0

D Apply one undercoat and two finishing coats of 1st grade silk vinyl paint of approved colour to all internal walls 52.65 sm - 0 - 0

Carried to Collection - 0

CEILING FINISHES

Acoustic ceiling

A Gypsum PVC laminated tiles (Dew drop 154) suspended ceiling comprising 600 x 600 x 15mm thick panels, laid on imported concealed ‘Z’ suspension system 500mm below slab, both panels and suspension FIRE RATED and panels to have guaranteed “SOUND ABSORPTION CO-EFFICIENT; or other equal and approved all as supplied an approved supplier 26.00 sm - 0 - 0

Carried to Collection - 0

COLLECTION

FLOOR FINISHES - 0

WALL FINISHES - 0

CEILING FINISHES - 0

TOTAL CARRIED TO SUMMARY OF BILL NO.1 - 0

WATER HEATER ROOM

ELEMENT NO. 1

DOORS

Grille door

A 900 x 1900mm high overall size mild steel plate single grill door comprising 50 x 25 x 3mm thick square hollow sections external framework and infilled 25 x 25 x 3mm RHS in 150 x 150 grid with 150mm wide x 16 gauge steel cover plate at the middle, 12mm diameter steel bolts and all other necessary ironmongeries to top and bottom including priming with red lead oxide after fabrication. 1.00 no - 0 - 0

TOTAL CARRIED TO SUMMARY OF BILL NO.1 - 0

ELEMENT NO. 2

WALL FINISHES

Internal Painting to Water Heater room

A Scrap off all visible flakes, blisters and open all hairline cracks, fill with appropriate or equally approved filler to all internal wall surfaces ready to receive new paint. 11.19 sm - 0 - 0

B Apply one undercoat and two finishing coats of 1st grade silk vinyl paint of approved colour to all internal walls 11.19 sm - 0 - 0

External Painting to Water Heater room

C Scrap off all visible flakes, blisters and open all hairline cracks, fill with appropriate or equally approved filler to all external wall surfaces ready to receive new paint. 10.22 sm - 0 - 0

D Apply one undercoat and two finishing coats of 1st grade weather guard paint of approved colour to all external walls 10.22 sm - 0 - 0

TOTAL CARRIED TO SUMMARY OF BILL NO.1 - 0

COMMON ITEMS

ELEMENT NO. 1

FINISHES

External Painting to MEN'S Bathroom 1, MEN'S Bathroom 2 and WOMEN'S Bathroom

A Scrap off all visible flakes, blisters and open all hairline cracks, fill with appropriate or equally approved filler to all external wall surfaces ready to receive new paint. 221.68 sm - 0 - 0

B Apply one undercoat and two finishing coats of 1st grade weather guard paint of approved colour to all external walls 221.68 sm - 0 - 0

TOTAL CARRIED TO SUMMARY OF BILL NO.1 - 0

ELEMENT NO. 2

Roof struture -B refers to roofing for Changing room Notes

Roof struture -C refers to roofing for MEN'S bathroom facility 2 and WOMEN'S bathroom facility Notes

Roof struture -D refers to roofing for water heater room Notes

MASONRY WORKS

C Prepare and apply one undercoat and two finishing coats of 1st grade silk vinyl paint of approved colour to all internal walls 53.51 sm - 0 - 0

D Prepare and apply one undercoat and two finishing coats of 1st grade weather guard paint of approved colour to all external walls 53.51 sm - 0 - 0

Carried to Collection - 0

ROOF STRUCTURE - A

G Supply and fix 110mm dia PVC rain water down pipes. Cost to include elbows, clips …etc complete 10.80 lm - 0 - 0

Carried to Collection - 0

ROOF STRUCTURE - B

G Supply and fix 110mm dia PVC rain water down pipes. Cost to include elbows, clips …etc complete 9.40 lm - 0 - 0

Carried to Collection - 0

ROOF STRUCTURE - C

G Supply and fix 110mm dia PVC rain water down pipes. Cost to include elbows, clips …etc complete 10.80 lm - 0 - 0

Carried to Collection - 0

ROOF STRUCTURE - D

F Supply and fix 110mm dia PVC rain water down pipes. Cost to include elbows, clips …etc complete 3.31 lm - 0 - 0

Carried to Collection - 0

COLLECTION

MASONRY WORKS - 0

ROOF STRUCTURE - A - 0

ROOF STRUCTURE - B - 0

ROOF STRUCTURE - C - 0

ROOF STRUCTURE - D - 0

TOTAL CARRIED TO SUMMARY OF BILL NO.1 - 0

ELEMENT NO. 3

BUILDER’S WORK IN CONNECTION WITH NOMINATED SUB-CONTRACTORS

MECHANICAL INSTALLATIONS

A Allow provision for wall chasing or floor and making good after installations of pipes 1.00 Ls - 0 - 0

ELECTRICAL INSTALLATIONS

B Allow provision for wall chasing and making good after installations of switches, sockets, adaptable boxes, DB, mitre boards, extract fans..etc 1.00 Ls - 0 - 0

TOTAL CARRIED TO SUMMARY OF BILL NO.1 - 0

ELEMENT NO. 4

BATHROOM LOCKERS

A Supply and install steel lockers size; 90x45x1800mm as directed 29.00 no - 0 - 0

TOTAL CARRIED TO SUMMARY OF BILL NO.1 - 0

&"-,Italic"GPTech / Liberty Engineering and Construction Ltd. Builder's Works - &P

Bill 1

SUMMARY

MEN'S BATHROOM 1 & 2

ELEMENT NO. DESCRIPTION

WOMEN'S BATHROOM

ELEMENT NO. DESCRIPTION

WATER HEATER ROOM

ELEMENT NO. DESCRIPTION

COMMON ITEMS

ELEMENT NO. DESCRIPTION

&"-,Italic"GPTech / Liberty Engineering and Construction Ltd. Bill-&P

Elec-Cover

Electrical Works

A LIGHTING FITTINGS, POWER WIRING & CONDUITING

KINDLY NOTE:All LED samples must be tested and approved before installation including motion / occupancy sensors.

All LED lighting products must have a minimum warranty period of Three (3) years or more.

All LED lighting products must be accompanied with relevant data sheets and lab test reports

Supply, Deliver, Install, Set to Work and Commission the Following.

1.01 Lighting point completely wired in 3x1.5mm² single core PVC insulated copper cables drawn in 20mm diameter HG PVC conduits including all accessories for one way switching but excluding the switch and luminaire No. 26 - 0 - 0

1.02 10A one gang one way switch as MK or approved equivalent. No. 12 - 0 - 0

1.03 10A two gang one way switch as MK or approved equivalent. No. 2 - 0 - 0

1.04 PHILIPS SmartBright Wide Batten 220-240V IP65 4K | 6.5K | 600mm | 1200mm | 1200mm Emergency No. 18 - 0 - 0

1.06 13A SP RCD proetcted Shaver raw power socket point completely wired in 3x2.5mm² single core PVC insulated copper cables drawn in 20mm diameter HG PVC conduits including all accessories but excluding the switched socket outlet No. 3 - 0 - 0

1.07 Air conditioner power point completely wired in 3x4.0mm² single core PVC insulated copper cables drawn in 25mm diameter EMT conduits including all accessories but excluding the 20A DP fused switched connection unit, and running to the Indoor AC Units No 4 - 0 - 0

1.08 Hand dryer power points completely wired in 3x2.5mm² single core PVC insulated copper cables drawn in 25mm diameter EMT conduits complete with all accessories. No. 4 - 0 - 0

B DISTRIBUTION BOARD, SUPPLY CABLE, ISOLATOR & OTHER ACCESSORIES

1.00 4 Ways 32A TPN power distribution board "A" complete with 32A tPN integral isolator but excluding the MCBs as Schneider Electric Acti 9 or approved equal No. 1 - 0 - 0

1.01 Sub-mains comprising of 4 core 6mm² PVC/PVC + 6mm² Earth cable insulated copper cables drawn in the conduit including all accessories and running from the SMP-LGF to Distribution Board "LGF" complete with cable glands. Lm 15 - 0 - 0

1.03 20A SP MCB No 6 - 0 - 0

1.04 25A SP MCB No 2 - 0 - 0

Incomer:

1.05 32A TP MCB No 1 - 0 - 0

1.06 20A DP fused switched connection unit complete with neon indicator as MK and marked "AC" + AVS 30A Surge Protectve Device (sollak) No. 4 - 0 - 0

1.07 20A SPN isolator for the Sump Pump & Water Heater as Schneider or approved equivalent. No. 2 - 0 - 0

1.08 13A RCD Protected Shaver Socket outlet as MK or approved equivalent No. 3 - 0 - 0

1.09 Allow for earthing complete with all necessary earthing equipment and the earthing pit for the Lightning Protection System (LPS) No. 1 - 0 - 0

1.10 3x4.0mm² single core copper cables drawn in 25mm diameter EMT conduits, from the distribution board to Sump pump isolator. Lm 10 - 0 - 0

1.11 3x4.0mm² single core copper cables drawn in 25mm diameter EMT conduits, from the distribution board to the Water Heater isolator. Lm 15 - 0 - 0

Sub Total -2 Carried Forward To summary page - 0

ITEM No. DESCRIPTION UNIT QTY RATE (USD) AMOUNT (USD)

C TESTING AND COMMISSIONING

1.00 Allow for testing and commissioning of all installations to the satisfaction of the USAID engineer Ls 1 - 0 - 0

Sub Total -3 Carried Forward To summary page - 0

ITEM No. Sumary Page AMOUNT (USD)

1 Subt Total - 1: LIGHTING FITTINGS, POWER WIRING & CONDUITING - 0

2 Sub Total - 2: DISTRIBUTION BOARD, SUPPLY CABLE, ISOLATOR & OTHER ACCESSORIES - 0

3 Sub Total - 3: TESTING AND COMMISSIONING - 0

ITEM No. PRICE SUMMARY AMOUNT (USD)

1 Total Amount for Electrical Installations Brought Forward; ………………. - 0

SUB - TOTAL ITEMS 1 & 2 ABOVE: ………………………………………… - 0

TOTAL AMOUNT FOR ELECTRICAL SERVICES WORKS CARRIED TO GRAND SUMMARY - 0

&"-,Italic"GPTech / Liberty Engineering and Construction Ltd. Electrical Works-&P

Mech_Cover

Mechanical Works

PPR-PN 20 PIPING

B 25mm PPR PN 20 pipe 35.00 LM - 0 - 0

C 32mm PPR PN 20 pipe 12.00 LM - 0 - 0

E 25mm diameter elbows/bends 3.00 No. - 0 - 0

F 32mm diameter elbows/bends 2.00 No. - 0 - 0

G 20mm female threaded elbow 14.00 No. - 0 - 0

I 20x25x20mm ditto 16.00 No. - 0 - 0

J 32mm 2.00 No. - 0 - 0

K 25mm 3.00 No. - 0 - 0

L 20mm 6.00 No. - 0 - 0

O 20mm diameter approved medium pressure screw down full way non-rising stem wedge gate valve to BS 5154 PN 20 for series B rating, with wheel and head joints to steel tubing and complete with round male threaded transition fittings. The gate valve to be as PEGLER or approved equivalent. 6.00 No. - 0 - 0

Total Cost Carried to Collection - 0

ELEMENT No.2

INTERNAL DRAINAGE

B 110mm ditto 50.00 LM - 0 - 0

D 110mm bend 3.00 No. - 0 - 0

E 45O 50mm double wye fitting 10.00 No. - 0 - 0

F 45O 110mm double wye fitting 15.00 No. - 0 - 0

H 32mm bottle 'p' trap 6.00 No. - 0 - 0

I 40mm tubular 'p' trap 4.00 No. - 0 - 0

J 50mm access plug 9.00 No. - 0 - 0

K 110mm acces plug 5.00 No. - 0 - 0

Total Cost Carried to Collection - 0

ELEMENT No.3

SANITARY FITTINGS AND ACCESSORIES

G Wall mounted half pedestal wash hand basin size 560 x 445mm with one tap holes, 32mm diameter chrome plated chain waste, chain stay hole, chrome plated angle valve and heavy duty plastic bottle trap (32mm 'P' trap) with 75mm seal as Milano or equally approved. 4.00 No. - 0 - 0

O Floor clean out complete with tile matching coloured cover or approved color 8.00 No. - 0 - 0

P 100mm Rodding eye cover 3.00 No. - 0 - 0

Q 50mm Rodding eye cover 5.00 No. - 0 - 0

S 50mmm 7.00 No. - 0 - 0

Total Cost Carried to Collection - 0

ELEMENT No.4

PORTABLE FIRE PROTECTION EQUIPMENT

B 9kg dry powder extinguisher 2.00 No. - 0 - 0

Total Cost Carried to Collection - 0

COLLECTION

1 Total for Element No.1 - 0

2 Total for Element No.2 - 0

3 Total for Element No.3 - 0

4 Total for Element No.4 - 0

Total Cost For Plumbing, Drainage, Sanitary fittings and Fire Protection - 0

HAVC INSTALLATIONS

H Uinstall bad unit and dispose to a location as directed by USAID Engineer. 1.00 No. - 0 - 0

Total for HVAC Installations…………….. - 0

Total for Testing and Commissioning…………….. - 0

2 Total for HVAC Installations - 0

3 Total for Testing and Commissioning - 0

GRAND TOTAL FOR PLUMBING & HVAC - 0

&"-,Italic"GPTech / Liberty Engineering and Construction Ltd. Plumb-HVAC-&P

Grand Summary

Signature ………………………………………………………………………………………………………

Date …………………………………………………………………………………………………………..

Full Name: ……….……………………………….............…………………………………………………

Title: ……….…………………………………............……………………………………………………………

Company Name: ……….………………….....………………………………………………………………

Address: ………..............................................…………………………………………………

Phone No.:…

Email Address:…

&"-,Italic"GPTech / Liberty Engineering and Construction Ltd. GS-&P