710237.pdf

This is a technical schematic and design document for Fire Protection Pump Stations prepared by the Department of the Air Force for facilities at Tinker Air Force Base, Oklahoma City, Oklahoma.

The document presents two detailed isometric drawings of fire protection pump station configurations. The upper drawing (B 2113, No Scale) illustrates a fire pump station design with labeled components including pump assembly, suction and discharge manifolds, and various piping connections. The notation indicates all materials shall have an 8-inch suction flanged connection and 6-inch discharge connection, with the contractor responsible for furnishing and installing necessary material for mounting through pump selected by existing steel beams. The lower drawing (B 3202, No Scale) depicts an alternative fire protection pump station configuration with similar pump components, suction/discharge piping, and a ground-level water supply connection. The schematic indicates this configuration requires the contractor to furnish and install a drive coupling to existing diesel engine on existing diesel engine. Both designs show internal pump systems, control mechanisms, and connection points for water supply and discharge systems. The document is marked as "As Built 18 Jan 66" and indicates "New Work" sections, suggesting this represents completed construction specifications for Air Force facilities. The technical drawings serve as design and installation reference documentation for fire protection infrastructure at the designated military installation.