FM200 Devices .pdf

This document is a specification sheet detailing the initiating devices, notification appliances, and system control functions for a fire alarm or life safety system installation.

The initiating devices section specifies 31 smoke detectors with addressable technology and photoelectric sensing, along with various manual and automatic detection equipment including duct smoke detectors, heat detectors, and linear heat detection cable. Manual release stations (quantity 2), abort switches (quantity 2), and maintenance by-pass switches (quantity 4) are included, with addressable or conventional configurations and alarm or supervisory notification types using contact technology. An air sampling panel (1 PRO 200D) is required with alarm capability. Additional initiating devices include tamper switches (quantity 1), low air switches (quantity 1), and low pressure switches, all addressable with supervisory capability and contact sensing technology. The notification appliances section specifies 5 audible bells, 3 visible discharge strobes, and 5 combination audible and visible horn/strobes. System control functions include HVAC shutdown (quantity 1), fresh air fan (quantity 1), electric control head, electric actuator, initiator, 4 solenoids, elevator recall, and door release (quantity 1). The document indicates that this system does not have interconnected systems, though the checkbox option notes that interconnected systems may be listed on a supplementary sheet if applicable.