Statement of Work for Mobile Tower 6-12-2023.pdf

PDF 117 KB Posted

Attached to
Shelter Communication Mobile Assets with Rooftop Antenna Mount
Solicitation number
6973GH-23-Q-00129
Issued by

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Statement of Work Mobile Antenna Tower Units

Trailer

Purchase 8, initial. The trailer will use a goose neck or bumper pull hitch based on the weight classification determined by the gross vehicle weight. The trailer length must not exceed 28’ (w/o coupler). The trailer must have a leveling system, jacks and plates and outriggers, minimum rating of

7000 lbs. The trailer must have electric breaks with break-away kit and LED lights. The trailer must have

D Ring tie downs. The trailer must meet all DOT requirement for public road use without permitting.

All LED lighting must comply with FCC-Title 47, CFR Part 15, Class B. The trailer must have connections points for hurricane/seismic tie downs.

Mobile Antenna Tower

The trailer must also have a self-supporting retractable tower system. The tower retraction must be electro-mechanically assisted. The self-supporting antenna tower must be capable of extending 50 feet.

The wind loading for the antenna tower must be 90 mph for self-supported and guy supports for above

90 mph with ¼ inch nominal ice thickness. The antenna tower must be capable of accepting 4 antennas and one obstruction light. The antennas must be separated by 8’, same elevation. The obstruction light is center mount and is NOT included on the 8 foot separation requirements. The antenna mounts must be compatible with standard aviation class omni-directional antennas, i.e. DPV-36 or D5072. The

Obstruction light is LED / IR Obstruction Lights compliant with the FAA's Advisory Circular 150/5345-43J.

The following are the characteristic for the ancillary equipment to be mounting on the antenna tower:

• minimum antenna weight is 19 lbs per antenna.

• minimum antenna length is 154”

• obstruction light weighs 16 lbs

• typical RF cable will be LDF4-50A or LMR-400 o LDF4-50A - 0.15 lbs/f (riser, 8 cables) o LMR – 0.10 lbs/f (3.2 lbs from antenna mass to antenna)

RF cable management must be through the center of the antenna mounting apparatus. Cable management system must be capable of managing 16 RF cables, per manufacture recommendation, for antennas and one flexible ac power cable for the obstruction light. The obstruction light power conductor must be UV rated SOW type.

File details come from the government source that posted it. Updated .