Appendix B - Paint Drawing Challenger604.pdf

Challenger 604 - N88

FAA

www.schemedesigners.com 80 Broadway, Second Floor

Cresskill, NJ 07626, USA 201.569.7785 craig@schemedesigners.com

Appendix B Challenger 604

N88

All dimensions used are only a guide.

Paint shop to determine final dimensions during the paint scheme layout.

COPYRIGHT © 2018 by Scheme Designers, Inc. - These drawings and paint schemes may only be used for the aircraft shown. Drawings and specifications shall be returned to the owner after the aircraft painting is complete. Reproduction of this scheme on another aircraft requires written permission of Scheme Designers, Inc.

Paint Scheme Specification

Prepared for:

FAA

January 21, 2018

Revision 1 - 2/14/18 Add RVSM Markings and Change Flag.

Aircraft Length Used: 821”

TH

ANNIVERSARY

1997 2017~

Scheme Designers, Inc.

201-569-7785 www.schemedesigners.com Copyright © 2018 by Scheme Designers, Inc.

Specification Page 1

TH

ANNIVERSARY

1997 2017~

Final Paint Scheme Design

White:

Matterhorn White

Jet Glo CM0570566

Blue:

Fighter Blue

Acry Glo W07445

Gold:

Antique Gold Metallic

Acry Glo H10512

Red:

Flight Red

Acry Glo W07432

Gray:

Aviation Gray

Acry Glo W00067

Scheme Designers, Inc.

201-569-7785 www.schemedesigners.com Copyright © 2018 by Scheme Designers, Inc.

NOTE:

The design on the right side of the aircraft is a mirror image of that on the left side.

Specification Page 2

TH

ANNIVERSARY

1997 2017~

Final Paint Scheme Design - Right Side View

There is a 2” wide gray door band painted on the emergency exit door itself along the edge of the door. Where the door band crosses the stripes, it is separated from the stripes by a 1/2” white space.

Scheme Designers, Inc.

201-569-7785 www.schemedesigners.com Copyright © 2018 by Scheme Designers, Inc.

Specification Page 3

TH

ANNIVERSARY

1997 2017~

Flow

NOTES:

The stripes are convex from the nose to below the center of the 4th cabin window, and concave from there aft. They both widen gradually as they flow aft. The stripes are separated from one another by a constant 1” white space.

Scheme Designers, Inc.

201-569-7785 www.schemedesigners.com Copyright © 2018 by Scheme Designers, Inc.

Specification Page 4

TH

ANNIVERSARY

1997 2017~

Forward Fuselage

1/21/2

Door Edge

1-1/8

2-3/4

36-1/2

9-1/4

The blue stripe starts at a point at the nose cone trailing edge.

The gold stripe starts at a point 1” from the edge of the blue stripe.

There is a 2” wide gray door band painted on the cabin door itself along the edge of the cabin door. Where the door band crosses the stripes, it is separated from the stripes by 1/2” white spaces.

Scheme Designers, Inc.

201-569-7785 www.schemedesigners.com Copyright © 2018 by Scheme Designers, Inc.

Specification Page 5

TH

ANNIVERSARY

1997 2017~

RSVM Markings

12.6

CL

WL 100

WL 76

FS 1 85.5 FS220

1/2

1/2

NOTE 1:

The markings are applied in gray paint.

Markings are duplicated in a mirror position on the right side of the nose of the aircraft.

NOTE 2:

Distortion from the shape of the nose accounts for the upper forward marking shape. All four markings are identical in shape and size.

MARKINGS:

Individual Marking Dimensions

Scheme Designers, Inc.

201-569-7785 www.schemedesigners.com Copyright © 2018 by Scheme Designers, Inc.

Specification Page 6

TH

ANNIVERSARY

1997 2017~

Forward Cabin Area

CL CL

CL

14-3/4

2-5/8

3-7/8

15-5/8

2-1/4

3-1/2

16-3/4

1-7/8

3-1/2

3-1/4

1-1/2

17-3/4

Scheme Designers, Inc.

201-569-7785 www.schemedesigners.com Copyright © 2018 by Scheme Designers, Inc.

Specification Page 7

TH

ANNIVERSARY

1997 2017~

Rear Cabin Area

CL CL CL

4-3/8

4-7/8

3-3/4

4-1/2

4-1/8

14-1/8

3-3/4

2-1/4

15-5/8

Scheme Designers, Inc.

201-569-7785 www.schemedesigners.com Copyright © 2018 by Scheme Designers, Inc.

Specification Page 8

TH

ANNIVERSARY

1997 2017~

Nacelle and Rear Fuselage

9-1/8

7-1/8

12-1/2

6-5/8

The N# is horizontal on the nacelle.

It is vertically and horizontally centered on the nacelle.

Scheme Designers, Inc.

201-569-7785 www.schemedesigners.com Copyright © 2018 by Scheme Designers, Inc.

Specification Page 9

TH

ANNIVERSARY

1997 2017~

Tail

9-3/4

10-1/4

29-1/4 15-3/4

LEFT SIDE

15-3/4

RIGHT SIDE

NOTE:

The flags are applied in red and blue paint using paint masks.

They are horizontal on both sides. Paint Masks are available from Scheme Designers.

The edge of the blue is convex across the tail. It flows off the upper trailing corner of the rudder.

The gold stripe is a constant 1” from the edge of the blue. It widens uniformly as it flows aft.

The horizontal tail is overall white.

29-1/4

6-1/4

Scheme Designers, Inc.

201-569-7785 www.schemedesigners.com Copyright © 2018 by Scheme Designers, Inc.

Specification Page 10

LEFT SIDE

RIGHT SIDE

The N# consists of 12” high rounded digits, angled Oaft on both side at 15 . The digits are blule with

3/4” gold drop shadow down and aft of each digit on both sides of the aircraft.

Paint masks are required. These are available from Scheme Designers, Inc. Contact Craig at 201-569-7785 or at craig@schemedesigners.com.

TH

ANNIVERSARY

Registration Numbers

Scheme Designers, Inc.

201-569-7785 www.schemedesigners.com Copyright © 2018 by Scheme Designers, Inc.

Specification Page 11

TH

ANNIVERSARY

1997 2017~

Winglet

19-5/8

5-7/8

11-5/8

3-3/4

The edges of the blue from both sides of the winglet meet in a downward pointing “V” shape on the leading edge of the winglet.

The edge of the blue is convex across the side of the winglet.

The gold stripe is a constant 1” from the edge of the blue.

It widens uniformly aft.

NOTE:

The design on the inboard surface of the winglet is a mirror image of that on the outboard surface of the winglet.

Scheme Designers, Inc.

201-569-7785 www.schemedesigners.com Copyright © 2018 by Scheme Designers, Inc.

Paint Masks and Vinyl Decals

The specifications indicate where paint masks and/or vinyl decals are required.

These may be provided by Scheme Designers, Inc., by other paint masks/vinyl decal manufacturers or made internally by the paint shop.

If they are to be ordered from Scheme Designers, Inc.:

Contact Craig Barnett at Scheme Designers to Order.

Phone: 201-569-7785 E-mail: Craig@schemedesigners.com

If they are ordered from an alternate source, or made internally:

The drawings in the specifications PDF file are scalable. Extract elements to be paint masked or made into a vinyl decal, scale them to the dimensions indicated in the specifications and proceed to cut. Alternately, the overall length of the aircraft is provided on the cover page. The full drawing of the aircraft can be extracted from the PDF file, enlarged to the overall length provided, and then elements to be paint masked or made into decal can be extracted and cut.

Questions/Errors

While we strive to be as accurate as possible, errors may occur in specifications text or dimensions, or text may be unclear. If an error is found or suspected, or if any item in these specifications is not clearly understood, please call or e-mail Craig at Scheme Designers, Inc.

immediately to resolve the issue or to obtain an explanation.

Alternately, if additional dimensions are required for any purpose, Scheme Designers, Inc. can generally provide those immediately by telephone or e-mail.

Specification Notes

Dimensions:

Dimensions are in inches, unless otherwise specified.

When dimensions are specified with the word “from,” it implies the perpendicular distance from where it is measured. For example, “The black stripe starts at a point 1” the edge of the red stripe” implies from that the measurement to the starting point of the black stripe is measured the edge of the red stripe.perpendicular to

If a vertical distance is being specified, it will be specified as “ ” or below “ ” the element from where the measurement is being taken. For above example, “The black stripe starts at a point 1” the edge of the below red stripe” implies that the measurement to the starting point of the black stripe is measured from the red stripe. Similarly, a vertically horizontal measurement (parallel to the ground line) will be specified as “ ” or “ ” a particular reference.forward of aft of

Colors:

Colors are referred to throughout the document by a shortened name.

For example, an Acry Glo Black Velvet Metallic color is simply referred to as black. The reference to the actual color against the shortened name is provided on Page 1 of the specifications.

If a different paint type is being used to that specified on page 1, contact Scheme Designers, Inc. directly to determine an appropriate color match in the brand of paint being used.

If there is any reason to suspect an error in a color specification, either in the color name or part number, please contact Scheme Designers, Inc. immediately to verify the color specification.

Specification Page 12

Specification Notes

Challenger 604

FAA

N88

Scheme Designers, Inc.

201-569-7785 www.schemedesigners.com Copyright © 2018 by Scheme Designers, Inc.

TH

ANNIVERSARY