6-Specifications Requirements Confirmation Form.pdf
PDF 139 KB Posted
- Solicitation number
- RFQ 2026-0024
- Issued by
- Chatham County, Georgia
About this file
This is a Specifications/Requirements Confirmation Form for RFQ 2026-0024 issued by the Savannah Airport Commission (SAC) in Georgia for the procurement of one custom trailer-mounted pressure washing system. The equipment specifications are comprehensive and include a 7x14-foot tandem axle heavy-duty trailer with custom welded components such as a ladder rack, hose reel shelf, tank retention slots, and side rack for surface cleaner. The system combines multiple cleaning capabilities: a hot water pressure washer with 8 GPM at 3500 PSI with commercial-grade electric start motor, an 11 GPM at 280 PSI soft wash skid sprayer with diaphragm pump and wireless remote control, and supporting equipment including a 525-gallon water tank, 100-gallon bleach tank, 7-gallon soap/degreaser tank, and multiple hose reels with high-pressure and soft wash hoses. The bidder must confirm inclusion of each specification item by checkmark or note exceptions on a designated Exceptions Sheet. The equipment must be brand new, unused, and free of defects, with all standard manufacturer equipment and accessories included. The successful vendor must have parts and service availability within a 50-mile radius of Savannah, Georgia.
The specifications further require a Marine/Dual Purpose 12V deep-cycle battery with 12-month warranty, a 24-inch ground force surface cleaner with remote chemical injector bypass system, high-pressure hose rated at 4000 PSI, and a complete remote control system with dual transmitters and feedback function. The bidder must include minimum 4-hour onsite operator training and 2-hour onsite maintenance training. The equipment shall carry standard manufacturer warranty with no dealer decals permitted. Bidders shall submit a complete copy of specifications as part of their bid response uploaded to Bonfire, with all bid components required to confirm compliance with stated requirements and specifications.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
RFQ 2026-0024
One (1) Custom Trailer-Mounted Pressure Washing System
SPECIFICATIONS/REQUIREMENTS CONFIRMATION FORM
SPECIFICATIONS: Bidders shall place a checkmark next to each requirement/specification that is applicable and inclusive with the unit. For any requirement or specification that is not included, please leave the corresponding circle blank and clearly note the exception on the designated Exceptions Sheet. A complete copy of the specifications must be included in this section of your bid response and uploaded to Bonfire as part of your submission.
(1) Custom Trailer-Mounted Pressure Washing System
● Minimum specifications for the unit are as follows:
o Trailer (see Appendix A: image of similar unit) o 7x14 ft open style tandem axle heavy duty trailer with brakes o Trailer designed for full operational system design weight o Custom top ladder rack welded o Custom hose reel shelf welded o Custom tank retention slots welded o Custom side rack for surface cleaner o Tongue jack rated for system o LED work lights with protector boxes on both sides of trailer for night work o Fenders with steps o Pressure Washer, Hot Water o Flow Rate: 8 Gallons Per Minute (GPM) o Pressure: 3500 PSI o Motor: Commercial grade (Electric Start) o Pump: Industrial Pump, Aluminum Skid Mount o Electric Start Soft Wash Skid Sprayer o 11 GPM @ 280 PSI o Diaphragm Pump o Gas Soft Wash System - A high flow metering system for your soft wash pump.
Standard with a wireless remote flush option with a light indicator.
o 13x19 Aluminum Stand o Poly Manifold Block o 3/4” Metering Valve o 1/2” Metering Valve o 3/4” SH Check Valve o 1/2” Soap Check Valve o 1” Water Check Valve o Flush Light Indicator o 3-Way Tee Jet o 1/2” Soap Solenoid o Wireless Remote Control o Plumb soft wash systems without a water metering valve.
o Highest strength mix with 10% sodium hypochlorite will be 60% SH / 40% Water o Battery o Marine/Dual Purpose12V Deep Cycle Battery HD24-DP o 12 Month Warranty o Battery Boxes o Water Tank o 525 Gallon, Horizontal Leg Tank o Support Bands 525 Gallon Horizontal Leg Tank – Galvanized for added corrosion protection.
o 1” Float Valve o Bleach Tank (Soft Wash) o 100-Gal Slim Line Tank o 48" L x 13" W x 42" H o Tank – 100 Gallon Slim Line Tank o Aluminum Support Bands (Set of Two) o Soap & Degreaser Tank o 7 Gallon, Flat Bottom Utility Tank o Pressure and Soft wash Hose Reels o 18" Manual Hose Reel o Full Aluminum Frame - Stainless Steel Manifold o Pressure Wash Hose Reels o 12" Electric Hose Reel o Full Aluminum Frame - Stainless Steel Manifold o Water Hose - Hose Reel o 12" Electric Hose Reel o Full Aluminum Frame - Stainless Steel Manifold o Hose Reel Stacking Kit – Stainless Steel o High Pressure Hose o 1-Wire Hose 3/8" x 200' @ 4000 PSI o Grey non-marking o Soft Wash Hose o 5/8" x 200', AG Spray Hose - Blue Soft Jet with Crimps o Supply Hose o 3/4" x 100' garden hose o Ball Valve Assembly o 3/8" Female Pipe Thread Ball Valve, High Pressure o Industrial @ 3050 PSI o 3/8" Mosmatic Gun Swivel o 3/8" Stainless Steel MPT Plug o 3/8" Stainless Steel MPT Coupler o Water Boss Soft wash Gun 1/2in o Surface Cleaner o 24" Ground Force 2 Nozzle Hydro-Flow o Remote Chemical Injector Bypass o 1 Control box with a 12ft battery cable and a 12ft actuator cable o 2 Remote transmitters with feedback function o 1 Ball valve/actuator assembly o 1 Waterproof pouch o 1 Hex head wrench (for ball valve replacement) o 4 Mounting brackets o Metal Bypass Riser - These risers are made to fit the mounting blocks (sold separately) for the Chemical Injector Bypass. Aluminum riser with stainless hardware.
o (Bypass Mounting Block Set of 2) Aluminum the bypass mounting blocks are designed to fit the chemical injector bypass. However, these mounting blocks may fit other chemical injector bypass brands. The mounting blocks are sold in pairs. Two are required for each chemical injector bypass.
o Controller Mounting Bracket o Chemical Injector Bypass Kit o Minimum 4-hour Onsite Operator and 2-hour Onsite Maintenance Training o Warranty: Standard manufacturer warranty.
*** No Dealer Decals
| o Warranty: Standard manufacturer warranty. |
| *** No Dealer Decals |
File details come from the government source that posted it. Updated .