6 DPL MEP 20 Oct 25.pdf

PDF 18 MB Posted Oct 24, 2025

Attached to: Dalton Public Library Reading Pavilion
Solicitation number: PE-75500-NONST-2025-000000048
Issued by: Wilcox County, Georgia

About this file

Written by GovTribe AI · Oct 27, 2025

These technical drawings are for the Reading Pavilion at the Dalton Whitfield County Public Library, part of the Northwest Georgia Regional Library System, located in Dalton, Georgia. The documents are comprehensive architectural and engineering plans for Phase #3 of the project, prepared by Campbell & Associates, Inc., Consulting Engineers. The drawings cover multiple disciplines including plumbing, HVAC, electrical, and fire alarm systems, with detailed plans showing floor layouts, piping configurations, equipment schedules, electrical panel details, and specific technical specifications for the library renovation.

The technical documents provide extensive engineering specifications for mechanical, electrical, and plumbing systems, including detailed schedules for HVAC equipment like package A/C units, high-volume low-speed fans, and kitchen hood ventilation. The plans include precise technical details such as wire sizing tables, grounding requirements, conduit installations, and electrical panel configurations. The project appears to be a comprehensive renovation that includes specialized library spaces like children's collections, special collections, reading areas, and support spaces like storage rooms and a kitchen. The drawings are dated July 22 and indicate a systematic approach to modernizing the library's infrastructure with attention to technical precision and functional design.

View the file

Other files

File	Type	Posted
7 DPL Project Manual 22 Oct 25.pdf	PDF	Oct 24, 2025
1 DPL Invitaiton to Bid _ Bid Documents.pdf	PDF	Oct 24, 2025
2 DPL Architectural 20 Oct 25.pdf	PDF	Oct 24, 2025
4 DPL Structural 20 Oct 25.pdf	PDF	Oct 24, 2025
3 DPL Site Civil 20 Oct 25.pdf	PDF	Oct 24, 2025
5 DPL Landscape Plans.pdf	PDF	Oct 24, 2025

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

WOMEN

MEN

CHILDREN'S

COLLECTIONS

EXIST. RAMP DN

1:12

LOBBY

GENERAL

COLLECTION

VEST.

CORRIDOR

213 STOR.

215A

STOR.

216A

STOR.

KITCHEN

PAVILION

STOR.

212A

CLOSET

2.2

B.7

B.3

B.7

2.3 2.7

2 3 41

O.A.

SHAFT

C B

CLOSET

280A

C BEAM ABOVEL

GENERAL

READING

C.8

JANITOR

CLOSET

LOCKERS

MEN

WOMEN

STAFF

LOUNGE

STAIR

WOMEN

MEN

CHILDREN'S

COLLECTIONS

EXIST. RAMP DN

1:12

LOBBY

GENERAL

COLLECTION

VEST.

CORRIDOR

213 STOR.

215A

STOR.

216A

STOR.

KITCHEN

PAVILION

STOR.

212A

CLOSET

2.2

B.7

B.3

B.7

2.3 2.7

2 3 41

O.A.

SHAFT

C B

CLOSET

280A

C BEAM ABOVEL

GENERAL

READING

C.8

SHEET NO.

DRAWING TITLE

22 JULY 25

JOB NO.

REVISIONS

DRAWN BY

DATE

O N, G A

G P

W H

C O

U N

E #3

1401 Carter St. Suite 101 Chattanooga, TN 37402

(423) 267-9718 Fax: (423) 265-7879 E-mail: caengrs@caengrs.comCA CAMPBELL & ASSOCIATES, INC.

CONSULTING ENGINEERS

www.caengrs.com

C&A No. 24-035

P1.0

PLUMBING PLANS

WATER AND

SEWER PIPING

AutoCAD SHX Text NOTES: 1. CORE DRILL THRU WALL. PROVIDE LINK SEAL AT CORE DRILL THRU WALL. PROVIDE LINK SEAL AT PENETRATION. 2. CONNECT NEW 4" SANITARY SEWER AND NEW 2" VENT CONNECT NEW 4" SANITARY SEWER AND NEW 2" VENT TO EXISTING PIPING NEAR EXISTING TOILETS. 3. GREASE TRAP SHALL BE JOSAM MODEL 60105H-ISI GREASE TRAP SHALL BE JOSAM MODEL 60105H-ISI RATED AT A MAXIMUM OF 20 GPM AND A GREASE STORAGE CAPACITY OF 40 POUNDS. COORDINATE INSTALLATION WITH LOCAL AHJ PRIOR TO INSTALLATION.

AutoCAD SHX Text

FLOOR MOUNTED GREASE TRAP

AutoCAD SHX Text

4"FS

AutoCAD SHX Text

3"FD

AutoCAD SHX Text 4"

AutoCAD SHX Text 2"

AutoCAD SHX Text

SEE NOTE 1

AutoCAD SHX Text

SEE NOTE 2

AutoCAD SHX Text S-1

AutoCAD SHX Text

3COMPARTMENT SINK PROVIDED BY OTHERS, INSTALLED BY PLUMBER.

AutoCAD SHX Text

SA-A

AutoCAD SHX Text

SA-A

AutoCAD SHX Text

SA-A

AutoCAD SHX Text 12"

AutoCAD SHX Text 34"

AutoCAD SHX Text 1"

AutoCAD SHX Text

NEW ELECTRIC DOMESTIC WATER HEATER

AutoCAD SHX Text

CONNECT TO EXISTING WATER SUPPLY NEAR EXISTING TOILETS

AutoCAD SHX Text NOTE: WATER PIPE SIZES SHOWN ON THIS PLAN ARE BASED ON TYPE "L" HARD DRAWN COPPER. IF ANY ALTERNATE PIPING MATERIALS ARE APPROVED PRIOR TO CONSTRUCTION, ANY REFERENCE TO P.E.X. SHALL BE INCREASED A MINIMUM OF ONE PIPE SIZE FOR EACH LINE SHOWN, " AND LARGER.34" AND LARGER.

AutoCAD SHX Text M

AutoCAD SHX Text A

AutoCAD SHX Text T

AutoCAD SHX Text H

AutoCAD SHX Text E

AutoCAD SHX Text W

AutoCAD SHX Text J

AutoCAD SHX Text W

AutoCAD SHX Text I

AutoCAD SHX Text L

AutoCAD SHX Text I

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text I

AutoCAD SHX Text G

AutoCAD SHX Text R

AutoCAD SHX Text O

AutoCAD SHX Text E

AutoCAD SHX Text G

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text

PROFESSIONAL

AutoCAD SHX Text N

AutoCAD SHX Text G

AutoCAD SHX Text I

AutoCAD SHX Text N

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text T

AutoCAD SHX Text S

AutoCAD SHX Text I

AutoCAD SHX Text G

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text No. 031592

AutoCAD SHX Text

WASTE AND VENT PIPING PLAN

AutoCAD SHX Text

SCALE: 1/8" = 1'-0"

AutoCAD SHX Text

WATER PIPING PLAN

AutoCAD SHX Text

SCALE: 1/8" = 1'-0"

EXIST. RAMP DN

1:12

EXIST. RAMP DN

1:12

WOMEN

MEN

CHILDREN'S

CIRC. DESK

CHILDREN'S

READING

CHILDREN'S

WORKROOM

CHILDREN'S

READING

CHILDREN'S

COLLECTIONS

STORY

HOUR

STORAGE

PROJECTION

ROOM

EXIST. RAMP DN

1:12

MULTI-PURPOSE

ROOM

LANGUAGE

LAB

230 WALL

STACK

KITCH.

LOBBY

MEN

WOMEN

COFFEE

BAR

LOBBY

VEST.

GENERAL

COLLECTION

SPECIAL

COLLECTION

VEST.

CORRIDOR

STOR.

215A

STOR.

216A

STAIR

STOR.

KITCHEN

PAVILION

STOR.

212A

CLOSET

2.2

B.7

B.3

B.7

2.3 2.7

CHILDREN'S

REFERENCE

MULTI-PURPOSE

2 3 4

O.A.

SHAFT

C B

CLOSET

280A

C BEAM ABOVEL

GENERAL

READING

C.8

P U

P R

D N

8' -8

-1 0"

'-0

'-6

SHEET NO.

DRAWING TITLE

22 JULY 25

JOB NO.

REVISIONS

DRAWN BY

DATE

O N, G A

G P

W H

C O

U N

E #3

1401 Carter St. Suite 101 Chattanooga, TN 37402

(423) 267-9718 Fax: (423) 265-7879 E-mail: caengrs@caengrs.comCA CAMPBELL & ASSOCIATES, INC.

CONSULTING ENGINEERS

www.caengrs.com

C&A No. 24-035

P1.1

PLUMBING PLAN

RAIN LEADERS

AutoCAD SHX Text

3"RD ON ROOF

AutoCAD SHX Text

3"RD ON ROOF

AutoCAD SHX Text

3"RD ON ROOF

AutoCAD SHX Text

4"RL DOWN

AutoCAD SHX Text

3"RD ON ROOF

AutoCAD SHX Text

SEE SITE UTILITY PLANS FOR CONTINUATION AND TERMINATION OF 8" STORM DRAIN

AutoCAD SHX Text 4"

AutoCAD SHX Text 3"

AutoCAD SHX Text

4"RL DOWN

AutoCAD SHX Text 4"

AutoCAD SHX Text 3"

AutoCAD SHX Text

3"AD2

AutoCAD SHX Text

3"AD2

AutoCAD SHX Text

3"AD2

AutoCAD SHX Text

3"AD2

AutoCAD SHX Text

3"AD2

AutoCAD SHX Text

3"AD2

AutoCAD SHX Text

3"AD2

AutoCAD SHX Text

3"AD2

AutoCAD SHX Text

3"AD2

AutoCAD SHX Text

3"AD2

AutoCAD SHX Text

3"AD2

AutoCAD SHX Text

3"AD2

AutoCAD SHX Text 3"

AutoCAD SHX Text 4"

AutoCAD SHX Text 6"

AutoCAD SHX Text 8"

AutoCAD SHX Text 3"

AutoCAD SHX Text

4"CO

AutoCAD SHX Text 6"

AutoCAD SHX Text

3"AD2

AutoCAD SHX Text

3"AD2

AutoCAD SHX Text

3"AD2

AutoCAD SHX Text

3"AD2

AutoCAD SHX Text

3"AD2

AutoCAD SHX Text

CONNECT TO DOWNSPOUT

AutoCAD SHX Text

CONNECT TO DOWNSPOUT

AutoCAD SHX Text

CONNECT TO DOWNSPOUT

AutoCAD SHX Text

CONNECT TO DOWNSPOUT

AutoCAD SHX Text

CONNECT TO DOWNSPOUT

AutoCAD SHX Text

CONNECT TO DOWNSPOUT

AutoCAD SHX Text 6"

AutoCAD SHX Text 8"

AutoCAD SHX Text NEW 8" RAIN LEADER SERVING DOWNSPOUTS FROM EXISTING ROOF. SEE CIVIL PLANS FOR CONTINUATION.

AutoCAD SHX Text NEW 6" STORM DRAIN SERVING AREA DRAINS FROM NEW PATIO. SEE CIVIL PLANS FOR CONTINUATION.

AutoCAD SHX Text 3"

AutoCAD SHX Text 4"

AutoCAD SHX Text 6"

AutoCAD SHX Text 3"

AutoCAD SHX Text 6"

AutoCAD SHX Text NEW 6" RAIN LEADER SERVING DOWNSPOUTS FROM EXISTING ROOF. SEE CIVIL PLANS FOR CONTINUATION.

AutoCAD SHX Text

CONNECT TO DOWNSPOUT

AutoCAD SHX Text NEW 8" RAIN LEADER SERVING DOWNSPOUTS FROM EXISTING ROOF. SEE CIVIL PLANS FOR CONTINUATION.

AutoCAD SHX Text 6"

AutoCAD SHX Text 8"

AutoCAD SHX Text

OUTSIDE CLEANOUT 2 WAY

AutoCAD SHX Text

2WAY OUTSIDE CLEANOUT

AutoCAD SHX Text

2 WAY OUTSIDE CLEANOUT

AutoCAD SHX Text C.O.

AutoCAD SHX Text TRENCH DRAIN #2 9'-10"L x 6"W x 4"D JOSAM TD-130-SS

AutoCAD SHX Text TRENCH DRAIN #1 38'-3"L x 6"W X 4"D JOSAM TD-130-SS

AutoCAD SHX Text 4"

AutoCAD SHX Text 6"

AutoCAD SHX Text NOTE: COORDINATE EXACT LOCATION OF TRENCH DRAINS WITH ARCHITECTURAL PLANS PRIOR TO INSTALLATION.

AutoCAD SHX Text

3"AD2

AutoCAD SHX Text

CONNECT TO DOWNSPOUT

AutoCAD SHX Text 6"

AutoCAD SHX Text M

AutoCAD SHX Text A

AutoCAD SHX Text T

AutoCAD SHX Text H

AutoCAD SHX Text E

AutoCAD SHX Text W

AutoCAD SHX Text J

AutoCAD SHX Text W

AutoCAD SHX Text I

AutoCAD SHX Text L

AutoCAD SHX Text I

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text I

AutoCAD SHX Text G

AutoCAD SHX Text R

AutoCAD SHX Text O

AutoCAD SHX Text E

AutoCAD SHX Text G

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text

PROFESSIONAL

AutoCAD SHX Text N

AutoCAD SHX Text G

AutoCAD SHX Text I

AutoCAD SHX Text N

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text T

AutoCAD SHX Text S

AutoCAD SHX Text I

AutoCAD SHX Text G

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text No. 031592

AutoCAD SHX Text

BUILDING RAINLEADER PIPING PLAN

SCALE: 1/8" = 1'-0"

SHEET NO.

DRAWING TITLE

22 JULY 25

JOB NO.

REVISIONS

DRAWN BY

DATE

O N, G A

G P

W H

C O

U N

E #3

1401 Carter St. Suite 101 Chattanooga, TN 37402

(423) 267-9718 Fax: (423) 265-7879 E-mail: caengrs@caengrs.comCA CAMPBELL & ASSOCIATES, INC.

CONSULTING ENGINEERS

www.caengrs.com

C&A No. 24-035

P2.0

PLUMBING

DETAILS &

SCHEDULES

GENERAL SPECIFICATIONS:

AutoCAD SHX Text SHOCK ABSORBER (per P.D.I. manual)

AutoCAD SHX Text

RAINLEADER ABOVE FINISHED CEILING

AutoCAD SHX Text

STORM DRAIN BELOW FINISHED GRADE

AutoCAD SHX Text

BALL VALVE IN HORIZONTAL LINE

AutoCAD SHX Text

DOMESTIC COLD WATER SUPPLY

AutoCAD SHX Text

SANITARY SEWER

AutoCAD SHX Text

WALL CLEANOUT

AutoCAD SHX Text

VENT

AutoCAD SHX Text

DOMESTIC HOT WATER SUPPLY (110%%DF)

AutoCAD SHX Text

FLOOR CLEANOUT

AutoCAD SHX Text

DOMESTIC HOT WATER RETURN (110%%DF)

AutoCAD SHX Text

APPROX. POINT OF CONNECTION,

AutoCAD SHX Text

NEW TO EXISTING.

AutoCAD SHX Text

SA-

AutoCAD SHX Text

AutoCAD SHX Text V

AutoCAD SHX Text

%%UPLUMBING LEGEND

AutoCAD SHX Text

CONDENSATE DRAIN

AutoCAD SHX Text

GATE VALVE IN HORIZONTAL LINE

AutoCAD SHX Text

VALVE IN VERTICAL RISER

AutoCAD SHX Text

FLOOR DRAIN

AutoCAD SHX Text

%%UABBREVIATIONS

AutoCAD SHX Text

VTR

AutoCAD SHX Text

VENT THRU ROOF

AutoCAD SHX Text

ABOVE FINISHED FLOOR

AutoCAD SHX Text

AFF

AutoCAD SHX Text

BELOW FINISHED FLOOR

AutoCAD SHX Text

BFF

AutoCAD SHX Text

ABOVE FINISHED CEILING

AutoCAD SHX Text

AFC

AutoCAD SHX Text

BELOW FINISHED CEILING

AutoCAD SHX Text

BFC

AutoCAD SHX Text

COLD WATER

AutoCAD SHX Text

HOT WATER

AutoCAD SHX Text

SANITARY SEWER

AutoCAD SHX Text

FLOOR CLEANOUT

AutoCAD SHX Text

FCO

AutoCAD SHX Text

WALL CLEANOUT

AutoCAD SHX Text

WCO

AutoCAD SHX Text

HOSE BIBB

AutoCAD SHX Text

NO SCALE

AutoCAD SHX Text

AND IN COMPLIANCE WITH ALL GOVERNING REGULATTIONS.

AutoCAD SHX Text

PROVIDE SHORING IN TRENCHES WHERE NEEDED FOR SAFETY

AutoCAD SHX Text

NOTE:

AutoCAD SHX Text

6"-ANY LINE INSIDE BUILDING

AutoCAD SHX Text

24"-GAS; WATER, 3 1/2" AND BELOW; ELECTRIC LINES BELOW 600V

AutoCAD SHX Text

30"-SEWERS, 6" AND BELOW: WATER, 4" AND UP.

AutoCAD SHX Text

ELECTRIC LINES ABOVE 600V

AutoCAD SHX Text

36"-SANITARY AND STORM SEWERS, 8" AND UP; ANY LINE UNDER PAVED AREA

AutoCAD SHX Text

48"-ANY LINE UNDER PUBLIC ROAD

AutoCAD SHX Text

MINIMUM DEPTH OF COVER BELOW FIN. GRADE:

AutoCAD SHX Text

8" DEEP IN ROCK

AutoCAD SHX Text

4" DEEP SOIL

AutoCAD SHX Text

PIPE BEDDING: 1/4"-3/4" GRAVEL

AutoCAD SHX Text

1/4"-3/4" GRAVEL BACK FILL TO TOP OF PIPE

AutoCAD SHX Text

2. PIPE O.D.+12" TO 24" MAX.

AutoCAD SHX Text

1. 18" MINIMUM OR

AutoCAD SHX Text

TRENCH WIDTH 3" ABOVE PIPE:

AutoCAD SHX Text

TAMP EACH LAYER

AutoCAD SHX Text

BACK-FILL IN 6" LAYERS,

AutoCAD SHX Text

GRAVEL BED

AutoCAD SHX Text

FINISHED FLOOR

AutoCAD SHX Text

INSIDE BUILDING

AutoCAD SHX Text

OUTSIDE BUILDING

AutoCAD SHX Text

PIPE TRENCH-TYPICAL

AutoCAD SHX Text 15050-B

AutoCAD SHX Text

TYPE 2

AutoCAD SHX Text

TYPE 1

AutoCAD SHX Text

15140-AA

AutoCAD SHX Text

PIPE SUPPORT DETAILS

AutoCAD SHX Text

COPPER

AutoCAD SHX Text

PIPE

AutoCAD SHX Text

FEE AND MASON

AutoCAD SHX Text

FIG. 500

AutoCAD SHX Text

PIPE INSULATION

AutoCAD SHX Text

TYPICAL FOR COPPER LINES NOT

AutoCAD SHX Text

SUBJECT TO EXPANSION AND

AutoCAD SHX Text

CONTRACTION.

AutoCAD SHX Text

USE OVERSIZED HANGER

AutoCAD SHX Text

AND SHIELD FOR ALL

AutoCAD SHX Text

INSULATED LINES.

AutoCAD SHX Text

TYPICAL FOR LINES NOT SUBJECT

AutoCAD SHX Text

TO EXPANSION AND CONTRACTION

AutoCAD SHX Text

FEE AND MASON

AutoCAD SHX Text

FIG. 239

AutoCAD SHX Text

NO SCALE

AutoCAD SHX Text

MAY BE SPLIT FOR

AutoCAD SHX Text

HOT LINES. USE

AutoCAD SHX Text

OVERSIZED BAND

AutoCAD SHX Text

AND SHIELD FOR

AutoCAD SHX Text

CHILLED LINES

AutoCAD SHX Text 15450-G

AutoCAD SHX Text

NO SCALE

AutoCAD SHX Text

WATER HEATER HOOK-UP

AutoCAD SHX Text

HEATER

AutoCAD SHX Text

WATER

AutoCAD SHX Text

FL.

AutoCAD SHX Text C.W.

AutoCAD SHX Text H.W.

AutoCAD SHX Text

ON ALL SIDES THAN HEATER.

AutoCAD SHX Text

HOUSEKEEPING PAD 6" LARGER

AutoCAD SHX Text

IRON LEGS OR MOUNT ON 4"

AutoCAD SHX Text

OR HUB DRAIN

AutoCAD SHX Text

3/4" TO FLOOR

AutoCAD SHX Text

FLOOR DRAIN

AutoCAD SHX Text

RELIEF VALVE, PIPE TO

AutoCAD SHX Text

ASME PRESSURE-TEMPERATURE

AutoCAD SHX Text M

AutoCAD SHX Text A

AutoCAD SHX Text T

AutoCAD SHX Text H

AutoCAD SHX Text E

AutoCAD SHX Text W

AutoCAD SHX Text J

AutoCAD SHX Text W

AutoCAD SHX Text I

AutoCAD SHX Text L

AutoCAD SHX Text I

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text I

AutoCAD SHX Text G

AutoCAD SHX Text R

AutoCAD SHX Text O

AutoCAD SHX Text E

AutoCAD SHX Text G

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text

PROFESSIONAL

AutoCAD SHX Text N

AutoCAD SHX Text G

AutoCAD SHX Text I

AutoCAD SHX Text N

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text T

AutoCAD SHX Text S

AutoCAD SHX Text I

AutoCAD SHX Text G

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text No. 031592

AutoCAD SHX Text

AutoCAD SHX Text INTENT: IT IS THE INTENT OF THE CONTRACT DOCUMENTS IT IS THE INTENT OF THE CONTRACT DOCUMENTS THAT THE CONTRACTOR FURNISH AND INSTALL ALL MATERIALS AND SYSTEMS, WITH NECESSARY AND INCIDENTAL APPURTENANCES, FOR A COMPLETE, FUNCTIONAL INSTALLATION, READY AND SUITABLE FOR THE OWNER'S USE. CODES: WORK UNDER THIS CONTRACT SHALL BE GOVERNED WORK UNDER THIS CONTRACT SHALL BE GOVERNED BY ALL APPLICABLE NATIONAL, STATE, AND LOCAL CODES. THE INTERNATIONAL MECHANICAL, ENERGY, AND PLUMBING CODES SHALL FORM THE BASIS FOR MINIMUM CONSTRUCTION STANDARDS FOR THIS PROJECT. FEES, PERMITS, AND TAXES: CONTRACTOR SHALL MAKE CONTRACTOR SHALL MAKE ARRANGEMENTS FOR INSPECTIONS AND PAY ALL LAWFUL FEES AND PERMITS REQUIRED BY LOCAL AUTHORITIES. CONTRACTOR SHALL PAY TAXES LEVIED FOR LABOR AND MATERIALS ASSOCIATED WITH WORK ON THIS PROJECT. GUARANTEE: WORK AND MATERIALS TO BE GUARANTEED WORK AND MATERIALS TO BE GUARANTEED FOR ONE (1) YEAR AFTER PROJECT COMPLETION.

AutoCAD SHX Text B. DOMESTIC WATER : HARD DRAWN COPPER TYPE "L" ASTM-B88, WITH WROUGHT COPPER FITTINGS.

AutoCAD SHX Text

A. BALL VALVE- ALL BALL VALVES SHALL BE FULL-PORT TYPE.

AutoCAD SHX Text CHATTANOOGA CITY ORDINANCE, NATIONAL FIRE PROTECTION ASSOCIATION. SEISMIC RESTRAINTS TO BE INSTALLED ON ALL COMPONENTS

AutoCAD SHX Text

2. CONTRACTOR SHALL FURNISH TWO (2) COMPLETE CLEAN SETS OF MARKED REPRODUCIBLE DRAWINGS AND SPECIFICATIONS SHOWING

AutoCAD SHX Text

1. ALL WORK TO BE DONE IN ACCORDANCE WITH CURRENT ACCEPTED INTERNATIONAL MECHANICAL CODE, INTERNATIONAL PLUMBING CODE, AutoCAD SHX Text A. WASTE AND VENTS: ABOVE AND BELOW GRADE PIPING SHALL BE SCHEDULE 40 PVC WITH DWV FITTINGS, EXCEPT IN

AutoCAD SHX Text

3. CUT AND PATCH ALL ITEMS INCIDENT TO THIS DIVISION.

AutoCAD SHX Text

CHANGES FROM CONTRACT DRAWINGS INCLUDE ADDENDUM AND CHANGE ORDER REVISIONS.

AutoCAD SHX Text

PLUMBING SPECIFICATION NOTES:

AutoCAD SHX Text

4. SEE PLUMBING FIXTURE CONNECTION SCHEDULE FOR PLUMBING FIXTURE AND TRIM SPECIFICATIONS AND NOTES.

AutoCAD SHX Text

6. VALVES:

AutoCAD SHX Text

PER INTERNATIONAL BUILDING CODE.

AutoCAD SHX Text

5. PIPING:

AutoCAD SHX Text RETURN AIR PLENUMS USE SERVICE WEIGHT CAST IRON WITH NO-HUB FITTINGS. "CELLULAR-CORE" PIPING IS NOT ACCEPTABLE.

AutoCAD SHX Text

7. PIPE INSULATION:

AutoCAD SHX Text

A. GLASS FIBER:

AutoCAD SHX Text 1). Domestic cold water - 1/2" thick; domestic hot water - 1-1/2" thick; hot water

AutoCAD SHX Text recirculating lines - 1-1/2" thick.

AutoCAD SHX Text

SIZE

AutoCAD SHX Text

MANUFACTURE

AutoCAD SHX Text

FIXTURE SCHEDULE

AutoCAD SHX Text

SYM.

AutoCAD SHX Text

FIXTURE NO.

AutoCAD SHX Text

REMARKS

AutoCAD SHX Text

SUPPLIES

AutoCAD SHX Text

TRIM

AutoCAD SHX Text

WASTE

AutoCAD SHX Text

CONNECTION

AutoCAD SHX Text

ROUGHING IN

AutoCAD SHX Text

TRAP

AutoCAD SHX Text C.W.

AutoCAD SHX Text H.W.

AutoCAD SHX Text

WASTE

AutoCAD SHX Text

VENT

AutoCAD SHX Text

CATALOG NUMBER

AutoCAD SHX Text

MFGR.

AutoCAD SHX Text

DESIG.

AutoCAD SHX Text

DRAIN SCHEDULE

AutoCAD SHX Text S1

AutoCAD SHX Text

JOSAM

AutoCAD SHX Text

WATER HEATER:

AutoCAD SHX Text

MFR.

AutoCAD SHX Text

MODEL NO.

AutoCAD SHX Text

WORKING PRESS.:

AutoCAD SHX Text

STORAGE:

AutoCAD SHX Text

GAL.

AutoCAD SHX Text

RECOVERY

AutoCAD SHX Text

GPH AT

AutoCAD SHX Text

RISE.

AutoCAD SHX Text

INPUT:

AutoCAD SHX Text

NOTES:

AutoCAD SHX Text

PROVIDE FACTORY SUPPLIED T&P RELIEF VALVE

AutoCAD SHX Text

AND PIPE DRAIN, FULL SIZE, TO DRAIN. DRAIN LINE

AutoCAD SHX Text

SHALL BE HARD DRAWN COPPER.

AutoCAD SHX Text

COORDINATE ELECTRICAL REQUIREMENTS WITH EC

AutoCAD SHX Text

PRIOR TO ORDERING HEATER AND/OR PUMP.

AutoCAD SHX Text

A.O. SMITH

AutoCAD SHX Text

DVE-52

AutoCAD SHX Text

150 PSI

AutoCAD SHX Text

100%%DF

AutoCAD SHX Text

12 KW - 208 VOLT - 3 PHASE

AutoCAD SHX Text

30000-A 3" (SEE NOTE)

AutoCAD SHX Text

JOSAM

AutoCAD SHX Text

INCLUDE DEEP SEAL TRAP AND INLINE TRAP GUARD

AutoCAD SHX Text

21500-3-1-26-CR

AutoCAD SHX Text

MOEN

AutoCAD SHX Text 216006

AutoCAD SHX Text 33X22X9

AutoCAD SHX Text T&S B-1142-04

AutoCAD SHX Text

HEAVY DUTY 1/4 TURN

AutoCAD SHX Text

SS BASKET

AutoCAD SHX Text

SEMI CAST "P"

AutoCAD SHX Text 1/2"

AutoCAD SHX Text 1 1/2"

AutoCAD SHX Text 2"

AutoCAD SHX Text

DROP IN KITCHEN SINK

AutoCAD SHX Text

AD2

AutoCAD SHX Text

JOSAM

AutoCAD SHX Text 42430

AutoCAD SHX Text

JOSAM

49340A-LF-4-31-43

22 JULY 25

JOB NO.

REVISIONS

DRAWN BY

DATE

O N, G A

G P

W H

C O

U N

E #3

1401 Carter St. Suite 101 Chattanooga, TN 37402

(423) 267-9718 Fax: (423) 265-7879 E-mail: caengrs@caengrs.comCA CAMPBELL & ASSOCIATES, INC.

CONSULTING ENGINEERS

www.caengrs.com

C&A No. 24-035

M0.1

HVAC LEGEND

GSJ

AutoCAD SHX Text M

AutoCAD SHX Text A

AutoCAD SHX Text T

AutoCAD SHX Text H

AutoCAD SHX Text E

AutoCAD SHX Text W

AutoCAD SHX Text J

AutoCAD SHX Text W

AutoCAD SHX Text I

AutoCAD SHX Text L

AutoCAD SHX Text I

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text I

AutoCAD SHX Text G

AutoCAD SHX Text R

AutoCAD SHX Text O

AutoCAD SHX Text E

AutoCAD SHX Text G

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text

PROFESSIONAL

AutoCAD SHX Text N

AutoCAD SHX Text G

AutoCAD SHX Text I

AutoCAD SHX Text N

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text T

AutoCAD SHX Text S

AutoCAD SHX Text I

AutoCAD SHX Text G

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text No. 031592

AutoCAD SHX Text

AutoCAD SHX Text A.F.F.

AutoCAD SHX Text

AMB.

AutoCAD SHX Text

CFM

AutoCAD SHX Text

AutoCAD SHX Text E.A.D.B.

AutoCAD SHX Text E.A.W.B.

AutoCAD SHX Text E.S.P.

AutoCAD SHX Text

FD-2

AutoCAD SHX Text

GPM

AutoCAD SHX Text

MBH

AutoCAD SHX Text

MCDB

AutoCAD SHX Text

MCWB

AutoCAD SHX Text N.C.

AutoCAD SHX Text N.O.

AutoCAD SHX Text N/A

AutoCAD SHX Text N.I.C.

AutoCAD SHX Text N.T.S.

AutoCAD SHX Text

MUA

AutoCAD SHX Text

ABOVE FINISHED FLOOR

AutoCAD SHX Text

AMBIENT

AutoCAD SHX Text

CUBIC FEET PER MINUTE

AutoCAD SHX Text

EXHAUST AIR

AutoCAD SHX Text

ENTERING AIR DRY BULB TEMPERATURE

AutoCAD SHX Text

ENTERING AIR WET BULB TEMPERATURE

AutoCAD SHX Text

EXTERNAL STATIC PRESSURE

AutoCAD SHX Text

2-HOUR FIRE DAMPER

AutoCAD SHX Text

GALLONS PER MINUTE

AutoCAD SHX Text

THOUSAND BTU/HOUR

AutoCAD SHX Text

MEAN COINCIDENT DRY BULB TEMP.

AutoCAD SHX Text

MEAN COINCIDENT WET BULB TEMP.

AutoCAD SHX Text

NORMALLY CLOSED

AutoCAD SHX Text

NORMALLY OPEN

AutoCAD SHX Text

NOT APPLICABLE

AutoCAD SHX Text

NOT IN CONTRACT

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

OUTSIDE AIR

AutoCAD SHX Text

RETURN AIR

AutoCAD SHX Text

RELATIVE HUMIDITY

AutoCAD SHX Text

SUPPLY AIR

AutoCAD SHX Text

MAKE-UP AIR

AutoCAD SHX Text

CHWS

AutoCAD SHX Text

CHILLED WATER SUPPLY

AutoCAD SHX Text

CHWR

AutoCAD SHX Text

CHILLED WATER RETURN

AutoCAD SHX Text

HWS

AutoCAD SHX Text

LOW-TEMPERATURE HOT WATER SUPPLY

AutoCAD SHX Text

HWR

AutoCAD SHX Text

LOW-TEMPERATURE HOT WATER RETURN

AutoCAD SHX Text H/C S

AutoCAD SHX Text

HOT/CHILLED WATER SUPPLY

AutoCAD SHX Text H/C R

AutoCAD SHX Text

HOT/CHILLED WATER RETURN

AutoCAD SHX Text

CWS

AutoCAD SHX Text

CONDENSER WATER SUPPLY

AutoCAD SHX Text

CWR

AutoCAD SHX Text

CONDENSER WATER RETURN

AutoCAD SHX Text

HPWS

AutoCAD SHX Text

HEAT PUMP WATER SUPPLY

AutoCAD SHX Text

HPWR

AutoCAD SHX Text

HEAT PUMP WATER RETURN

AutoCAD SHX Text

REFRIGERANT LIQUID

AutoCAD SHX Text

REFRIGERANT SUCTION

AutoCAD SHX Text

CONDENSATE DRAIN ABOVE FLOOR/GRADE

AutoCAD SHX Text

CONDENSATE DRAIN BELOW FLOOR/GRADE

AutoCAD SHX Text

BALL VALVE

AutoCAD SHX Text

BUTTERFLY VALVE

AutoCAD SHX Text

CHECK VALVE

AutoCAD SHX Text

GATE OR GLOBE VALVE

AutoCAD SHX Text

THREE-WAY VALVE

AutoCAD SHX Text M

AutoCAD SHX Text

VALVE ACTUATORS:

AutoCAD SHX Text

MANUAL, NON-RISING STEM

AutoCAD SHX Text

ELECTRIC MOTOR

AutoCAD SHX Text S

AutoCAD SHX Text

ELECTRIC SOLENOID

AutoCAD SHX Text

CAP

AutoCAD SHX Text

ELBOW, FACING TOWARD VIEWER

AutoCAD SHX Text

ELBOW, FACING AWAY FROM VIEWER

AutoCAD SHX Text

REDUCER, CONCENTRIC

AutoCAD SHX Text

FOB

AutoCAD SHX Text

FOT

AutoCAD SHX Text

REDUCER, ECCENTRIC, FLAT ON BOTTOM

AutoCAD SHX Text

REDUCER, ECCENTRIC, FLAT ON TOP

AutoCAD SHX Text

TEE, FACING TOWARD VIEWER

AutoCAD SHX Text

TEE, FACING AWAY FROM VIEWER

AutoCAD SHX Text

UNION, SCREWED

AutoCAD SHX Text

UNION, FLANGED

AutoCAD SHX Text

STRAINER

AutoCAD SHX Text

STRAINER, BLOW OFF

AutoCAD SHX Text

PETE'S PLUG

AutoCAD SHX Text

PRESSURE GAGE AND COCK

AutoCAD SHX Text

THERMOMETER

AutoCAD SHX Text

PUMP

AutoCAD SHX Text

DIRECTION OF FLOW

AutoCAD SHX Text 12x6

AutoCAD SHX Text 12"

AutoCAD SHX Text

RECTANGULAR DUCTWORK; DIMENSIONS SHOWN ARE NET INTERNAL DIMENSIONS

AutoCAD SHX Text

ROUND DUCTWORK; DIMENSION SHOWN IS NET INTERNAL DIMENSION

AutoCAD SHX Text

FLEXIBLE DUCTWORK (MAX. LENGTH = 4 FEET)

AutoCAD SHX Text

EXISTING DUCTWORK TO BE REMOVED

AutoCAD SHX Text

EXISTING DUCTWORK TO REMAIN IN PLACE

AutoCAD SHX Text

NEW DUCTWORK

AutoCAD SHX Text

RADIUS ELBOW (45° SHOWN)

AutoCAD SHX Text

MITERED ELBOW WITH DOUBLE THICK TURNING VANES (90° SHOWN)

AutoCAD SHX Text

SUPPLY DUCTWORK SHOWN TURNING UP

AutoCAD SHX Text

RETURN DUCTWORK SHOWN TURNING DOWN

AutoCAD SHX Text

MANUAL VOLUME BALANCING DAMPER

AutoCAD SHX Text

AutoCAD SHX Text C

AutoCAD SHX Text P

AutoCAD SHX Text

PROGRAMMABLE TEMPERATURE SENSOR

AutoCAD SHX Text

REMOTE WIRED WALL-MOUNTED CONTROLLER

AutoCAD SHX Text

DUCT-MOUNTED SMOKE DETECTOR

AutoCAD SHX Text

MANUAL PULL STATION FOR KITCHEN EXHAUST HOOD FIRE SUPPRESSION SYSTEM

AutoCAD SHX Text DUCT CONNECTION TO THE NECK OF A DIFFUSER, REGISTER, OR GRILLE (DIFFUSER CONNECTION SHOWN)

AutoCAD SHX Text

SIDEWALL GRILLE OR REGISTER; ARROW INDICATES FLOW DIRECTION

AutoCAD SHX Text 20x10

AutoCAD SHX Text H

AutoCAD SHX Text

CFM

AutoCAD SHX Text

SIZE OF DIFFUSER/GRILLE NECK

AutoCAD SHX Text

DIFFUSER/GRILLE TYPE (SEE SCHEDULE)

AutoCAD SHX Text

AIR VOLUME OF DIFFUSER/GRILLE

AutoCAD SHX Text

FD-2

AutoCAD SHX Text

FIRE DAMPER WITH ACCESS DOOR IN DUCT

AutoCAD SHX Text

HVAC LEGEND AND SYMBOLS

AutoCAD SHX Text

SUPPLY, OUTSIDE AIR, OR MAKE-UP AIR DUCTWORK CROSS-SECTION

AutoCAD SHX Text

RETURN DUCTWORK CROSS-SECTION

AutoCAD SHX Text

EXHAUST DUCTWORK CROSS-SECTION

AutoCAD SHX Text B.F.C.

AutoCAD SHX Text

BELOW FINISHED CEILING

AutoCAD SHX Text

SD-2

AutoCAD SHX Text

SMOKE DAMPER WITH ACCESS DOOR IN DUCT

AutoCAD SHX Text

FD-2

AutoCAD SHX Text

FIRE/SMOKE DAMPER WITH ACCESS DOOR IN DUCT

AutoCAD SHX Text 12x6 F.O.

AutoCAD SHX Text

FLAT OVAL DUCTWORK; DIMENSION SHOWN IS NET INTERNAL DIMENSION

AutoCAD SHX Text NOTE: NOT ALL SYMBOLS SHOWN IN LEGEND MAY BE ON THE DRAWINGS.: NOT ALL SYMBOLS SHOWN IN LEGEND MAY BE ON THE DRAWINGS.

INDICATES POINT OF CONNECTION BETWEEN NEW AND EXISTING WORK

SHEET NO.

DRAWING TITLE

22 JULY 25

JOB NO.

REVISIONS

DRAWN BY

DATE

O N, G A

G P

W H

C O

U N

E #3

1401 Carter St. Suite 101 Chattanooga, TN 37402

(423) 267-9718 Fax: (423) 265-7879 E-mail: caengrs@caengrs.comCA CAMPBELL & ASSOCIATES, INC.

CONSULTING ENGINEERS

www.caengrs.com

C&A No. 24-035

M0.2

HVAC GENERAL

NOTES

GSJ

AutoCAD SHX Text MECHANICAL GENERAL NOTES: : INTENT: IT IS THE INTENT OF THE CONTRACT DOCUMENTS THAT THE CONTRACTOR FURNISH AND INSTALL ALL MATERIALS AND SYSTEMS, WITH NECESSARY AND INCIDENTAL APPURTANCES, FOR A COMPLETE, FUNCTIONAL INSTALLATION, READY AND SUITABLE FOR THE OWNER'S USE. CODES: WORK UNDER THIS CONTRACT SHALL BE GOVERNED BY ALL APPLICABLE NATIONAL, STATE, AND LOCAL CODES. THE INTERNATIONAL MECHANICAL, ENERGY CONSERVATION, AND PLUMBING CODES SHALL FORM THE BASIS FOR MINIMUM CONSTRUCTION STANDARDS FOR THIS PROJECT. FEES, PERMITS, AND TAXES: CONTRACTOR SHALL MAKE ARRANGEMENTS FOR INSPECTIONS AND PAY ALL LAWFUL FEES AND PERMITS REQUIRED BY LOCAL AUTHORITIES. CONTRACTOR SHALL PAY TAXES LEVIED FOR LABOR AND MATERIALS ASSOCIATED WITH WORK ON THIS PROJECT. INSPECTION OF SITE: THE DRAWINGS ARE PREPARED FROM THE BEST INFORMATION AVAILABLE AND REFLECT THE CONDITIONS COMMENSURATE WITH THIS INFORMATION. HOWEVER, THE CONTRACTOR SHALL VISIT THE SITE PRIOR TO SUBMITTING A PROPOSAL AND SHALL VERIFY THE LOCATIONS, SIZES, DEPTH, PRESSURE, ETC., OF ALL EXISTING UTILITIES; AND FAMILIARIZE HIMSELF WITH WORKING CONDITIONS, HAZARDS, EXISTING GRADES, SOIL CONDITIONS, OBSTRUCTIONS, ETC. IF IT BECOMES EVIDENT THAT EXISTING SITE CONDITIONS WILL IMPAIR THE PROPER OPERATION OF THE UTILITIES, OR THE CONSTRUCTION PROCESS, THE ARCHITECT SHALL BE NOTIFIED IN WRITING. ALL PROPOSALS AND BIDS SHALL TAKE THESE EXISTING CONDITIONS AND ANY REVISIONS REQUIRED INTO ACCOUNT, AND THE LACK OF SPECIFIC SITE INFORMATION ON THE DRAWINGS SHALL NOT RELIEVE THE CONTRACTOR OF HIS RESPONSIBILITY. DATA AND SHOP DRAWINGS: PRIOR TO ORDERING, SUBMIT CERTIFIED PRINTS AND/OR DESCRIPTIVE DATA FOR MAJOR PIECES OF EQUIPMENT, FIXTURES, VALVES, INSULATION, CONTROLS, ETC. STAMP, SIGN, AND CERTIFY TO BE CORRECT AND IN COMPLIANCE WITH THE CONTRACT DOCUMENTS, EACH DRAWING SUBMITTED FOR REVIEW. DRAWINGS SUBMITTED WITHOUT SIGNED CERTIFICATION WILL BE RETURNED WITHOUT REVIEW. ANY DEVIATION IN SUBMITTAL FROM CONTRACT DOCUMENTS OF MATERIALS, CAPACITIES, SPACE REQUIREMENTS IN ITEMS FURNISHED, ETC., SHALL BE LISTED IN A LETTER ACCOMPANYING SUBMITTAL STATING DEVIATION AND REASON REQUESTED FOR CONSIDERATION OF ACCEPTANCE. SUBMITTALS SHALL INCLUDE ONE PAPER COPY (IF REQUESTED) AND ONE ELECTRONIC COPY, CLEARLY MARKED, AND IN ORDER AS INDICATED IN DRAWINGS. ITEMS SUBMITTED PARTIALLY AND IN AN UNORGANIZED MANNER SHALL BE RETURNED WITHOUT REVIEW. SUBMITTAL SHALL SHOW: MANUFACTURER'S CATALOG NUMBER, PERFORMANCE DATA WITH INDICATED OPERATING POINTS, FINISHES, OPTIONAL FEATURES AND MODIFICATIONS. EACH SHEET OF PRINTED SUBMITTAL DATA SHALL BE CLEARLY MARKED (USING ARROWS, UNDERLINING, CIRCLING, OR HIGHLIGHTING) TO SHOW THE PARTICULAR SIZE, TYPE, MODEL NUMBER, RATINGS AND OPTIONS ACTUALLY PROPOSED. WHEN WORK IN ACCORDANCE WITH THE MANUFACTURER'S RECOMMENDATION IS SPECIFIED, A COPY OF THESE RECOMMENDATIONS SHALL BE KEPT IN THE JOB OFFICE. SHOP DRAWINGS SHALL SHOW SIZES AND DETAILS OF REQUIRED CONCRETE AND STEEL MACHINE FOUNDATION, LOCATION OF ANCHOR BOLTS, PHYSICAL DIMENSION OF EQUIPMENT, EQUIPMENT WEIGHT OR OTHER PERTINENT DATA REQUIRED FOR EQUIPMENT SUPPORT OR INSTALLATION. APPROVED SHOP DRAWINGS DO NOT MEAN THAT DRAWINGS HAVE BEEN CHECKED IN DETAIL; SAID APPROVAL DOES NOT IN ANY WAY RELIEVE THE CONTRACTOR FROM HIS RESPONSIBILITY OR NECESSITY OF FURNISHING MATERIAL OR PERFORMING WORK AS REQUIRED BY THE CONTRACT DRAWINGS OR SPECIFICATIONS. GUARANTEE: WORK AND MATERIALS TO BE GUARANTEED FOR ONE (1) YEAR AFTER PROJECT COMPLETION. HVAC REFRIGERATION SYSTEM COMPONENTS SHALL HAVE AN ADDITIONAL 4-YEAR WARRANTY. EACH PIECE OF EQUIPMENT SHALL MEET PERFORMANCE SPECIFICATIONS AFTER ONE (1) YEAR'S ACTUAL OPERATION. THE CONTRACTOR SHALL REPLACE, OR MAKE GOOD, ANY DEFECT DUE TO FAULTY WORKMANSHIP OR MATERIAL, WHICH SHALL DEVELOP WITHIN ONE (1) YEAR FROM DATE OF ACCEPTANCE AT NO COST TO THE OWNER. THIS GUARANTEE SHALL COVER BOTH MATERIAL AND LABOR AND SHALL INCLUDE: (A) REFRIGERANT AND OIL REPLACEMENT, (B) ANY ADJUSTMENTS OR SERVICE REQUIRED, AND (C) ANY NECESSARY ADJUSTMENTS IN SYSTEM CONTROL SET POINTS WHEN REQUIRED, BUT NO FILTER MAINTENANCE. THE CONTRACTOR IS RESPONSIBLE TO REPLACE WORK FOUND NOT IN COMPLIANCE WITH THE CONTRACT AT ANY TIME DURING THE LIFE OF THE INSTALLATION; REPLACEMENT OF NON-CONFORMING WORK IS NOT SUBJECT TO THE ONE-YEAR WARRANTY LIMITATION. WHERE THE WORK OF VARIOUS TRADES WILL BE INSTALLED IN CLOSE PROXIMITY TO ONE ANOTHER, OR WHERE THERE IS EVIDENCE THAT THE WORK OF ONE TRADE WILL INTERFERE WITH WORK OR REQUIRED ACCESS/CLEARANCE SPACE OF OTHER TRADES, COORDINATE ADJUSTMENTS PRIOR TO INSTALLATION TO PROVIDE SATISFACTORY CLEARANCE. FOR ANY WORK INSTALLED WITHOUT COORDINATION AND/OR CAUSING CONFLICTS, PROVIDE ALL NECESSARY CHANGES TO CORRECT THE CONDITIONS. THE CONSTRUCTION WORK SHALL BE PERFORMED IN A MANNER ACCEPTABLE TO ARCHITECT AND ENGINEER AND SHALL BEAR NO ADDITIONAL COSTS. LOCATE ALL EQUIPMENT REQUIRING SERVICING, OPERATIONAL, OR MAINTENANCE CLEARANCES IN A FULLY ACCESSIBLE POSITION. EQUIPMENT REQUIRING THESE CLEARANCES SHALL INCLUDE, BUT NOT BE LIMITED TO: DAMPERS, VALVES, TRAPS, CLEANOUTS, MOTORS, CONTROLLERS, DISCONNECTS, DRAIN PANS, ETC. IF EQUIPMENT IS CONCEALED, PROVIDE ACCESS DOORS TO MAINTAIN ACCESSIBILITY. MINOR DEVIATIONS FROM THE CONTRACT DOCUMENTS MAY BE MADE TO ALLOW FOR BETTER ACCESSIBILITY. WHERE FIRE DAMPERS ARE REQUIRED, PROVIDE ACCESS PANELS TO ALLOW RE-LINKING OF DAMPER FUSIBLE LINKS. PANELS IN RATED CONSTRUCTION SHALL BEAR UL LABEL. INSTALL ALL DUCTWORK AND HORIZONTAL PIPING AS HIGH AS POSSIBLE AND ABOVE THE FINISHED CEILING, UNLESS NOTED OTHERWISE. PROVIDE OFFSETS, AS REQUIRED, TO AVOID ALL OBSTRUCTIONS. PIPING, CONDUITS, CABLES, ETC., SHALL BE RUN NEATLY, PARALLEL TO EXISTING AND NEW PIPING AND BUILDING WALLS AND FLOORS. DO NOT SCALE DRAWINGS; USE GIVEN DIMENSIONS ONLY. IF NOT SHOWN, VERIFY AND DOCUMENT CORRECT DIMENSION WITH THE ARCHITECT OR ENGINEER. CONTRACTOR SHALL VERIFY ALL DIMENSIONS AND CONDITIONS AT THE JOB SITE. A TECHNICIAN, FACTORY TRAINED AND CERTIFIED BY THE MANUFACTURER OF THE HVAC EQUIPMENT PROVIDED, SHALL PERFORM PRE START-UP CHECK AND SHALL SUBMIT A REPORT TO THE OWNER ON EACH ROOFTOP UNIT AND SPLIT SYSTEM. THIS REPORT SHALL INCLUDE CERTIFICATION, IN WRITING, THAT THE EQUIPMENT IS CORRECTLY INSTALLED (INCLUDING PROPER DRAINAGE FROM DRAIN PANS

AutoCAD SHX Text AND SEALING OF AIR LEAKS); ELECTRICAL CONNECTIONS AND TERMINAL TIGHTNESS; INDOOR FILTERS ARE CLEAN, IN PLACE, AND EASILY REPLACEABLE; FANS AND COMPRESSORS ROTATE CORRECTLY; ELECTRICAL AMP DRAWS SHALL BE RECORDED AND CERTIFIED WITHIN MANUFACTURER'S RECOMMENDED LIMITS; REFRIGERANT SUCTION AND DISCHARGE PRESSURES FOR ALL CIRCUITS WITH STATEMENT THAT SYSTEMS ARE CORRECTLY CHARGED. ALL DUCTWORK DIMENSIONS SHOWN ARE INSIDE CLEAR DIMENSIONS. DUCTWORK SHALL BE SIZES SHOWN ON THE DRAWINGS, CROSS-BROKEN, RIGIDLY BRACED, ADEQUATELY SUPPORTED, AND SECURELY FASTENED IN PLACE. FABRICATE AND INSTALL DUCTS IN ACCORDANCE WITH THE LATEST EDITION OF THE SMACNA HVAC DUCT CONSTRUCTION STANDARDS METAL AND FLEXIBLE. DUCTWORK: RIGID - DUCTWORK EXPOSED TO WEATHER OR TO BE PAINTED SHALL BE FABRICATED OF ARMCO ZINCGRIP-PAINTGRIP GALVANIZED STEEL. CONCEALED DUCTWORK SHALL BE FABRICATED FROM HOT DIPPED GALVANIZED STEEL, ASTM 3A-527, WITH GAUGE MARKING ON BOTTOM OUTSIDE OF DUCT. WHERE DUCTS ARE BARE, USE GROUP 1, 1.25 OZ. GALVANIZED; WHERE PAINTED, USE GROUP 4 1.25 OZ. GALVANIZED AND PHOSPHATIZED. ALL RIGID DUCTWORK SHALL BE CONSTRUCTED WITH A MINIMUM OF 26 GA. SHEET METAL. ALL METAL FASTENERS, SUPPORTS, ETC., SHALL BE GALVANIZED STEEL OR NON-CORROSIVE METAL. USE ROUND SNAP-LOCK DUCTWORK WHERE CLEARANCES PERMIT. RIGID DUCTWORK EXPOSED TO VIEW SHALL BE ROUND DOUBLE-WALL SPIRAL LOCKSEAM DUCTWORK WITH 2"THICK INSULATION BETWEEN THE INNER AND OUTER SHELL, ACOUSTI K-27 AS MANUFACTURED BY UNITED MCGILL OR EQUAL. SEAL ALL SUPPLY AIR DUCTWORK JOINTS TO SMACNA CLASS "A" OR TO DUCT SEAL SCHEDULE IF PRESENT ON DRAWINGS; DUCT LEAKAGE SHALL NOT EXCEED 1 PERCENT OF THE SPECIFIED AIRFLOWS WHEN TESTED AT 1" W.G. DUCTWORK: FLEXIBLE - UL LISTED, CLASSIFIED AS A CLASS 1 AIR DUCT, TESTED UNDER UL STANDARD 181, AND MEET LOCAL CODE REQUIREMENTS. FLEXIBLE SUPPLY DUCTS SHALL HAVE FACTORY INSTALLED FIBERGLASS INSULATION AND A FIRE RETARDANT VAPOR BARRIER JACKET WITH A PERM RATING OF NOT OVER 0.1, A "C" FACTOR OF NOT OVER 0.23 (OR A "U" FACTOR OF NOT OVER 0.22 WITH 1000 FPM VELOCITY IN THE DUCT), AND WHICH COMPLY WITH NFPA-90A. CONNECT FLEXIBLE DUCTS TO DIFFUSERS AND RIGID DUCT USING STAINLESS STEEL CLAMPS, FLEXMASTER QUICK RELEASE-LS SERIES OR EQUAL. FLEXIBLE DUCT SHALL BE CUT TO EXACT LENGTH REQUIRED. FLEXIBLE DUCTWORK SHALL BE SUPPORTED IN ACCORDANCE WITH FIGURES 3-10 AND 3-11 IN THE SMACNA HVAC DUCT CONSTRUCTION STANDARDS - METAL AND FLEXIBLE (3RD EDITION). FLEXIBLE DUCTWORK RUNNING THROUGH JOIST WEBBING SHALL NOT BE CRUSHED OR DEFORMED OUT OF ROUND. DUCT BRANCH CONNECTIONS: SUPPLY BRANCH - SEE SMACNA MANUAL FIGURE 4-6; USE 45° OR RADIUS ENTRY CINCH LOCKCOLLAR AND MANUAL BALANCING DAMPER. BRANCH RETURN - SEE SMACNA MANUAL FIGURE 4-6; USE 45° OR RADIUS ENTRY CINCH LOCKCOLLAR AND MANUAL BALANCING DAMPER. ROUND SUPPLY TAKE-OFFS - USE FACTORY FABRICATED BEADED STRAIGHT SPIN-IN TYPE GALVANIZED STEEL FITTINGS WITH 45° EXTRACTOR AND MANUAL BALANCING DAMPER.ROUND RETURN/EXHAUST TAP-INS - USE FACTORY FABRICATED BEADED STRAIGHT SPIN-IN TYPE GALVANIZED STEEL FITTINGS AND MANUAL BALANCING DAMPER. MANUAL DAMPERS - HAND OPERATED BUTTERFLY TYPE DAMPERS CONSTRUCTED FROM GALVANIZED STEEL, 18 GAGE OF HEAVIER. DAMPERS FOR DUCTS TO 12" DEPTH AND 12" DIAMETER TO BE SINGLE BLADE CARRIED ON A " ROUND STEEL ROD MOUNTED INSIDE OF DUCT WITHOUT 38" ROUND STEEL ROD MOUNTED INSIDE OF DUCT WITHOUT FRAME AND FITTED WITH LOCKING TYPE QUADRANT AND BRASS END BEARING PLATE ACCURATELY DRILLED AND SECURED TO DUCT; REFER TO FIGURES A, B, AND C, FIGURE 7-4, OF THE SMACNA MANUAL FOR CONSTRUCTION DETAILS. PROVIDE INSULATION STANDOFF FOR DAMPER OPERATOR. DAMPERS FOR DUCTS OF GREATER DEPTH TO BE MULTI-BLADE TYPE, 12" MAXIMUM BLADE WIDTH UP TO 30" BLADE LENGTH AND 10" MAXIMUM BLADE WIDTH OVER 30" BLADE LENGTH. BLADES TO BE MOUNTED ON FRAME WITH BRASS SLEEVE BEARINGS, INTERCONNECTED FOR OPERATION FROM ONE LOCKING TYPE HAND QUADRANT; ROUND PIVOT RODS TO HAVE SECTION FACED FLAT TO RECEIVE LOCKING SETSCREW IN LOCKING QUADRANT; NOTCHING OF BLADES TO FIT LINKAGE PERMITTED. REFER TO FIGURE A AND B, FIGURE 7-5, OF SMACNA MANUAL. PROVIDE INSULATION STANDOFF FOR DAMPER OPERATOR. FLEXIBLE CONNECTORS: PROVIDE FLEXIBLE CONNECTORS BETWEEN EACH AIR UNIT OR FAN AND THE DISTRIBUTION DUCT, ON BOTH THE SUPPLY SIDE AND THE RETURN SIDE. CONNECTORS SHALL NOT EXCEED 10 INCHES IN LENGTH. CONNECTORS TO BE OF AN APPROVED FLAME RETARDANT FABRIC WITH A MAXIMUM FLAME SPREAD INDEX OF 25 AND A MAXIMUM SMOKE DEVELOPED INDEX OF 50. MANUAL BALANCING DAMPERS: MANUAL BALANCING DAMPERS IN RECTANGULAR DUCTS SHALL BE OPPOSED BLADE TYPE CONSTRUCTED OF 16 GA. GALVANIZED STEEL AND VINYL SEALS, AND A MAXIMUM LEAKAGE OF 5 CFM PER FT² AT 1" W.G. DIFFERENTIAL PRESSURE. ALL DAMPERS TO BE CAULKED WITH SILICONE BETWEEN AT 1" W.G. DIFFERENTIAL PRESSURE. ALL DAMPERS TO BE CAULKED WITH SILICONE BETWEEN DAMPER AND DUCT, AND HAVE EXTERNAL ADJUSTMENT MARKED OPEN-CLOSED. QUADRANTS FOR DAMPERS INSULATED DUCTS SHALL BE MOUNTED ON 1 " WHITE PINE BLOCKS. DAMPERS SHALL BE 14" WHITE PINE BLOCKS. DAMPERS SHALL BE FURNISHED WITH CONTROLS WHERE INDICATED ON THE DRAWINGS. MANUAL BALANCING DAMPERS IN ROUND DUCTS SHALL BE MINIMUM TWO BLADE OPPOSED BLADE TYPE CONSTRUCTED OF 16 GA. GALVANIZED STEEL WITH A MAXIMUM LEAKAGE OF 5 CFM PER FT² AT AT 1" W.G. DIFFERENTIAL PRESSURE. QUADRANTS FOR DAMPERS SHALL BE MOUNTED ON 1 " WHITE PINE 14" WHITE PINE BLOCKS. MANUAL BALANCING DAMPERS IN DUCTS WITH PRESSURE OVER 2" W.G. SHALL HAVE MULTIPLE OPPOSED BLADE TYPE 18 GA. AIRFOIL BLADES WITH SEALS. LEAKAGE SHALL BE 5 CFM PER FT² AT 1" AT 1" W.G. DIFFERENTIAL PRESSURE. QUADRANTS SHALL BE MOUNTED ON 1 " WHITE PINE BLOCKS. 14" WHITE PINE BLOCKS. AIR DISTRIBUTION DEVICES: AS SCHEDULED ON DRAWINGS.

AutoCAD SHX Text REFRIGERANT PIPING: HARD-DRAWN TYPE "L" SEAMLESS COPPER TUBING, ASTM B88-74. FITTINGS SHALL BE WROUGHT COPPER, ANSI B16-22-63, WITH A WORKING PRESSURE OF NOT LESS THAN 300 PSIG. REFRIGERANT PIPING SHALL BE SIZED AND INSTALLED WITH THE EQUIPMENT MANUFACTURER'S WRITTEN RECOMMENDATIONS. CONTRACTOR SHALL PROVIDE WRITTEN CERTIFICATION FROM THE EQUIPMENT MANUFACTURER AS TO THE CORRECTNESS OF THE LINE SIZES PRIOR TO INSTALLATION. CONDENSATE DRAIN PIPING: SCHEDULE 40 PVC WITH DWV FITTINGS, EXCEPT IN RETURN AIR PLENUMS, WHERE TYPE "L" COPPER SHALL BE USED. PIPING SHALL BE INSTALLED WITHOUT ANY SAGGING TO ENSURE COMPLETE DRAINAGE. THE CONDENSATE DRAIN SHALL BE THE SAME SIZE AS THE UNIT DRAIN CONNECTION BUT SHALL NOT BE LESS THAN " DIAMETER PIPE. ALL CONDENSATE DRAIN PIPING 34" DIAMETER PIPE. ALL CONDENSATE DRAIN PIPING SHALL SLOPE DOWN 1/8" IN 12" MINIMUM IN DIRECTION OF FLOW. INSULATION: DUCTWORK; SUPPLY, RETURN, OUTSIDE AIR, OR MAKE-UP AIR (CONCEALED) - 2" THICK, 1 PCF DENSITY FIBERGLASS BLANKET WITH VAPOR BARRIER (INSTALLED R-VALUE SHALL BE 6.0 MINIMUM). OVERLAP BUTTING EDGES, FOLD, SEAL AND TAPE, AND PROVIDE A CONTINUOUS VAPOR BARRIER. USE OF STAPLES SHALL NOT BE PERMITTED. RETURN AIR DUCT INSIDE THE CONDITIONED SPACE NEED NOT BE EXTERNALLY INSULATED. ALL SHEET METAL SURFACES, INCLUDING THE TOPS OF SUPPLY AIR DIFFUSERS EXPOSED ABOVE THE CEILING, SHALL BE INSULATED. INSULATION: ALL DUCTWORK EXPOSED TO EXTERIOR CONDITIONS - 2" THICK FIBERGLASS BOARD WITH VAPOR BARRIER HAVING A DENSITY OF 6 PCF MINIMUM, A THERMAL CONDUCTIVITY OF NO GREATER THAN 0.23 BTU-IN/HR-FT²- F AT 75 F AND A MINIMUM INSTALLED R-VALUE OF 8.0. SEAL ALL -°F AT 75° F AND A MINIMUM INSTALLED R-VALUE OF 8.0. SEAL ALLINSULATION SEAMS AND BUTTING EDGES VAPOR TIGHT TO ENSURE A CONTINUOUS VAPOR BARRIER. FOR DUCTWORK ON THE EXTERIOR OF THE BUILDING, SLOPE INSULATION ON TOP OF DUCTWORK FROM A HIGH POINT ON THE CENTERLINE OF THE DUCT TO THE SIDES, WITH A MINIMUM THICKNESS OF 2" AT THE SIDES, TO ENSURE NO WATER BUILDS UP ON TOP OF DUCT. INSTALL AN ALUMINUM JACKET OR VENTURECLAD PVC JACKET ON THE OUTSIDE OF THE INSULATION. INSULATION: DUCTWORK; EXHAUST - NO INSULATION IS REQUIRED. INSULATION: REFRIGERANT PIPING (EXTERIOR AND INTERIOR OF BUILDING) AND CONDENSATE DRAIN PIPING (INTERIOR OF BUILDING) - 1" THICK CLOSED CELL ELASTOMERIC FOAM INSULATION, ARMAFLEX AP OR EQUAL, WITH MANUFACTURER'S RECOMMENDED ADHESIVE AT ALL JOINTS. INSULATION EXPOSED TO EXTERIOR CONDITIONS SHALL BE COVERED IN A FLEXIBLE PVC JACKET AND SEALED WEATHERPROOF. HVAC EQUIPMENT: AS SCHEDULED ON DRAWINGS. EQUIPMENT SUBMITTED, INCLUDING THE SPECIFIED EQUIPMENT, SHALL BE FACTORY DIRECT FROM THE MANUFACTURER'S COMMERCIAL SALES OFFICE, INCLUDING FACTORY DIRECT WARRANTY AND SUPPORT. EQUIPMENT SUBMITTED FOR APPROVAL DURING THE SUBMITTAL PROCESS SHALL BE SUBMITTED COMPLETE WITH MANUFACTURER PERFORMANCE DATA AT THE DESIGN CONDITIONS. SUBMITTAL DATA SHALL BE PROVIDED FROM FACTORY AUTHORIZED REPRESENTATIVES. MANUFACTURER CATALOG STANDARD CUT SHEETS ARE NOT ACCEPTABLE AS SUBMITTALS. MANUFACTURER'S DESIGNATED DEALERS AND/OR WHOLESALERS ARE NOT A SUBSTITUTE FOR FACTORY SERVICE AND SUPPORT. MECHANICAL CONTRACTOR SHALL BE FULLY RESPONSIBLE FOR ANY CHANGES AND/OR COSTS ASSOCIATED WITH USING PRODUCTS OTHER THAN THOSE SPECIFIED AND/OR SCHEDULED. HVAC SUPPLIER SHALL HAVE AVAILABLE FACTORY SERVICE TECHNICIANS WITHIN A 100 MILE RADIUS OF JOBSITE AND OFFER 24 HOUR/7 DAY SERVICE, MAINTENANCE, AND REPAIRS. MOUNT TEMPERATURE SENSORS, REMOTE CONTROL PANELS, ETC., AS INDICATED ON PLANS 48" A.F.F. TO CENTER OF DEVICE UNLESS OTHERWISE NOTED OR AS REQUIRED FOR ACCESSIBILITY CODE COMPLIANCE. COORDINATE LOCATION OF SENSORS WITH CABINETRY AND OTHER SERVICES. THE TEMPERATURE SENSORS SHALL NOT BE INSTALLED ON OUTSIDE WALLS, IN THE DIRECT AIR STREAM FROM ANY DIFFUSER, OR WHERE IT MAY BE INFLUENCED BY HEAT GIVEN OFF FROM EQUIPMENT. ADJUSTING AND BALANCING: ALL EQUIPMENT AND SYSTEMS SHALL BE ADJUSTED AND BALANCED SO THAT THEY PERFORM TO THE SATISFACTION OF THE ARCHITECT. AIR DISTRIBUTION SYSTEM(S) SHALL BE ADJUSTED TO THE AIR QUANTITIES INDICATED AND TO ELIMINATE ANY TEMPERATURE GRADIENTS BETWEEN ROOMS OR WITHIN ROOMS GREATER THAN 3° F. CONTRACTOR SHALL ENGAGE THE SERVICESOF A TEST AND BALANCE AGENCY TO PERFORM THE ADJUSTING AND BALANCING OF THE MECHANICAL SYSTEM(S). ALL ADJUSTING AND BALANCING WORK SHALL BE PERFORMED BY THE PROCEDURAL STANDARDS AS SET FORTH BY THE NATIONAL ENVIRONMENTAL BALANCING BUREAU (NEBB), THE ASSOCIATED AIR BALANCE COUNCIL (AABC), OR THE SHEET METAL AND AIR CONDITIONING CONTRACTORS NATIONAL ASSOCIATION (SMACNA). THE CONTRACTOR SHALL SUBMIT TAB REPORTS TO THE ENGINEER FOR REVIEW; ALL TAB REPORTS SHALL BE SUBMITTED ON FORMS AS SET FORTH BY THE ORGANIZATIONS LISTED ABOVE. ALL AIR SYSTEMS WITH ECONOMIZERS SHALL BE CHECKED TO ENSURE PROPER OPERATION AND TO VERIFY THAT THE POWER EXHAUST IS RELIEVING A MINIMUM OF 90% OF UNIT TOTAL AIRFLOW AT THE E.S.P. REQUIRED FOR THAT AIRFLOW THROUGH THE RETURN AIR DUCTWORK. ALL SAFETY DEVICES SHALL BE CHECKED FOR PROPER OPERATION. PRIOR TO COMPLETION AND FINAL ACCEPTANCE OF THE FACILITY, FURNISH TO THE ENGINEER CERTIFICATION THAT THE MECHANICAL SYSTEMS HAVE BEEN TESTED AND THAT THE INSTALLATION AND PERFORMANCE OF THOSE SYSTEMS CONFORM TO THE CONTRACT DOCUMENTS. RECORD AND AS-BUILT DRAWINGS: MAINTAIN AT THE JOB SITE A SET OF CONTRACT RECORD DRAWINGS KEPT CURRENT BY INDICATING THEREON ALL CHANGES, SUBSTITUTIONS, ETC., BETWEEN WORK AS SPECIFIED AND AS INSTALLED. FURNISH THE ENGINEER WITH ONE (1) COMPLETE SET OF ELECTRONIC DRAWING FILES SHOWING INSTALLED LOCATION, SIZE, ETC., OF ALL WORK AND MATERIAL IN .PDF AND .DWG FORMAT. SHOW ON RECORD DRAWINGS ACTUAL AIR QUANTITIES, WATER FLOW RATES, VALVE AND/OR DAMPER POSITIONS AFTER BALANCING, ETC.; ALSO SHOW, BY ACTUAL DIMENSION, LOCATION OF ALL UNDERGROUND WORK. FOR EACH PIECE OF EQUIPMENT, PROVIDE THE OWNER THREE (3) SETS OF: (A) MANUFACTURER'S PRINTED CATALOG PAGES, OPERATING AND MAINTENANCE INSTRUCTIONS, WIRING AND CONNECTION DIAGRAM, ETC.; (B) TEMPERATURE-HUMIDITY AND MOTOR INTERLOCK CONTROL AND WIRING DIAGRAMS SHOWING OPERATION INSTRUCTIONS FOR, AND NORMAL POSITION OF, EACH MOTOR AND CONTROLLER, CONTROL VALVE, THERMOSTAT, ETC.; AND (C) LUBRICATION CHART. BIND THIS INFORMATION INTO 8-1/2"x 11" BOOKLETS. ALL THREE (3) SETS SHALL BE ASSEMBLED IN HARDBACK BINDERS.

AutoCAD SHX Text M

AutoCAD SHX Text A

AutoCAD SHX Text T

AutoCAD SHX Text H

AutoCAD SHX Text E

AutoCAD SHX Text W

AutoCAD SHX Text J

AutoCAD SHX Text W

AutoCAD SHX Text I

AutoCAD SHX Text L

AutoCAD SHX Text I

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text I

AutoCAD SHX Text G

AutoCAD SHX Text R

AutoCAD SHX Text O

AutoCAD SHX Text E

AutoCAD SHX Text G

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text

PROFESSIONAL

AutoCAD SHX Text N

AutoCAD SHX Text G

AutoCAD SHX Text I

AutoCAD SHX Text N

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text T

AutoCAD SHX Text S

AutoCAD SHX Text I

AutoCAD SHX Text G

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text No. 031592

AutoCAD SHX Text

EXIST. RAMP DN

1:12

WOMEN

MEN

CHILDREN'S

COLLECTIONS

EXIST. RAMP DN

1:12

WOMEN

COFFEE

BAR

LOBBY

SPECIAL

COLLECTION

VEST.

CORRIDOR

213 STOR.

215A

STOR.

216A

STAIR

STOR.

KITCHEN

PAVILION

STOR.

212A

CLOSET

2.2

B.7

B.3

B.7

2.3 2.7

CHILDREN'S

REFERENCE

2 3 41

O.A.

SHAFT

CLOSET

280A

GENERAL

READING

C.8

SHEET NO.

DRAWING TITLE

22 JULY 25

JOB NO.

REVISIONS

DRAWN BY

DATE

O N, G A

G P

W H

C O

U N

E #3

1401 Carter St. Suite 101 Chattanooga, TN 37402

(423) 267-9718 Fax: (423) 265-7879 E-mail: caengrs@caengrs.comCA CAMPBELL & ASSOCIATES, INC.

CONSULTING ENGINEERS

www.caengrs.com

C&A No. 24-035

M1.0

HVAC FLOOR

PLAN

GSJ

HVAC FLOOR PLAN

1/8" = 1' - 0"

AutoCAD SHX Text

KH-1

AutoCAD SHX Text

HVAC PLAN NOTES::

AutoCAD SHX Text 7" EXHAUST DUCTWORK UP TO BROAN MODEL 611 ROOF CAP.MANUAL PULL STATION FOR KH-1 FIRE SUPPRESSION SYSTEM. KH-1 FIRE SUPPRESSION SYSTEM. FIRE SUPPRESSION SYSTEM. TOUCHSCREEN CONTROLLER FOR CF-1. CF-1. . REFRIGERANT PIPING ABOVE CEILING. REFRIGERANT PIPING UP TO ROOF. 34" CONDENSATE PIPING UP TO ROOF. TURN " CONDENSATE PIPING DOWN IN WALL AND CONNECT TO 34" CONDENSATE PIPING DOWN IN WALL AND CONNECT TO SINK TAILPIECE (SEE DETAIL ON SHEET M3.0). INSTALL RETURN AIR GRILLE A MAXIMUM OF 0'-6" A.F.F. CONDENSATE PUMP WITH RESERVOIR (SEE DUCTLESS SPLIT SYSTEM SCHEDULE FOR ELECTRICAL INFORMATION). TEMPERATURE AND HUMIDITY SENSORS MOUNTED ON WALL. 22x26 SUPPLY AIR DUCTWORK UP TO ROOF. 30° OFFSET UP.

AutoCAD SHX Text

CF-1

AutoCAD SHX Text

RTU-1

AutoCAD SHX Text

AutoCAD SHX Text 30"x42"

AutoCAD SHX Text B

AutoCAD SHX Text

CFM

AutoCAD SHX Text

AutoCAD SHX Text 42x16

AutoCAD SHX Text

AutoCAD SHX Text P

AutoCAD SHX Text C

AutoCAD SHX Text

AC-280

AutoCAD SHX Text

AC-280

AutoCAD SHX Text

AC-281

AutoCAD SHX Text 4-10"x3"

AutoCAD SHX Text A

AutoCAD SHX Text

CFM EA.

AutoCAD SHX Text 8-12"x4"

AutoCAD SHX Text A

AutoCAD SHX Text

CFM EA.

AutoCAD SHX Text 4-10"x3"

AutoCAD SHX Text A

AutoCAD SHX Text

CFM EA.

AutoCAD SHX Text 8-12"x4"

AutoCAD SHX Text A

AutoCAD SHX Text

CFM EA.

AutoCAD SHX Text 24x14

AutoCAD SHX Text 18"

AutoCAD SHX Text 12"

AutoCAD SHX Text 16"

AutoCAD SHX Text 14"

AutoCAD SHX Text 12"

AutoCAD SHX Text 18"

AutoCAD SHX Text 14"

AutoCAD SHX Text 16"

AutoCAD SHX Text

AutoCAD SHX Text 24x14

AutoCAD SHX Text

AutoCAD SHX Text 24x14

AutoCAD SHX Text

AutoCAD SHX Text 24x14

AutoCAD SHX Text

AutoCAD SHX Text 24x14

AutoCAD SHX Text 12"x4"

AutoCAD SHX Text C

AutoCAD SHX Text

CFM

AutoCAD SHX Text 12"x4"

AutoCAD SHX Text C

AutoCAD SHX Text

CFM

AutoCAD SHX Text M

AutoCAD SHX Text A

AutoCAD SHX Text T

AutoCAD SHX Text H

AutoCAD SHX Text E

AutoCAD SHX Text W

AutoCAD SHX Text J

AutoCAD SHX Text W

AutoCAD SHX Text I

AutoCAD SHX Text L

AutoCAD SHX Text I

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text I

AutoCAD SHX Text G

AutoCAD SHX Text R

AutoCAD SHX Text O

AutoCAD SHX Text E

AutoCAD SHX Text G

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text

PROFESSIONAL

AutoCAD SHX Text N

AutoCAD SHX Text G

AutoCAD SHX Text I

AutoCAD SHX Text N

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text T

AutoCAD SHX Text S

AutoCAD SHX Text I

AutoCAD SHX Text G

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text No. 031592

AutoCAD SHX Text

MEMBRANE ROOF

EXISTING GUTTER & DS TO REMAIN

FACE OF EXISTING PRE-CAST

RN-1

SHEET NO.

DRAWING TITLE

22 JULY 25

JOB NO.

REVISIONS

DRAWN BY

DATE

O N, G A

G P

W H

C O

U N

E #3

1401 Carter St. Suite 101 Chattanooga, TN 37402

(423) 267-9718 Fax: (423) 265-7879 E-mail: caengrs@caengrs.comCA CAMPBELL & ASSOCIATES, INC.

CONSULTING ENGINEERS

www.caengrs.com

C&A No. 24-035

M1.1

HVAC ROOF PLAN

GSJ

HVAC ROOF PLAN

1/8" = 1' - 0"

AutoCAD SHX Text

HVAC PLAN NOTES::

AutoCAD SHX Text BROAN MODEL 611 ROOF CAP. SPILL CONDENSATE DRAIN INTO ROOF DRAIN - DO NOT SPILL DO NOT SPILL CONDENSATE ONTO ROOF SURFACE. . 144"x51" OUTSIDE AIR INTAKE LOUVER, UNITED ENERTECH MODEL FL-D-4 OR APPROVED EQUAL. PROVIDE WITH FLANGED FRAME, BIRDSCREEN, AND GRAVITY BACKDRAFT DAMPER. ADJUST LOUVER TO PROVIDE 27,000 CFM OF CFM MAXIMUM DURING ECONOMIZER CYCLE. REFRIGERANT PIPING DOWN. 34" CONDENSATE PIPING DOWN. 22x26 SUPPLY AIR DUCT DOWN.

AutoCAD SHX Text

RTU-1

AutoCAD SHX Text

HP-280

AutoCAD SHX Text

HP-281

AutoCAD SHX Text

AutoCAD SHX Text M

AutoCAD SHX Text A

AutoCAD SHX Text T

AutoCAD SHX Text H

AutoCAD SHX Text E

AutoCAD SHX Text W

AutoCAD SHX Text J

AutoCAD SHX Text W

AutoCAD SHX Text I

AutoCAD SHX Text L

AutoCAD SHX Text I

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text I

AutoCAD SHX Text G

AutoCAD SHX Text R

AutoCAD SHX Text O

AutoCAD SHX Text E

AutoCAD SHX Text G

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text

PROFESSIONAL

AutoCAD SHX Text N

AutoCAD SHX Text G

AutoCAD SHX Text I

AutoCAD SHX Text N

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text T

AutoCAD SHX Text S

AutoCAD SHX Text I

AutoCAD SHX Text G

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text No. 031592

AutoCAD SHX Text

KITCHEN HOOD WITH INTERNAL FAN SCHEDULE

REGISTERS, GRILLES, & DIFFUSERS SCHEDULE MINIMUM DUCT SEAL LEVEL

PACKAGE A/C UNIT SCHEDULE (HEAT PUMP)

HIGH VOLUME LOW SPEED FAN SCHEDULE

DUCTLESS SPLIT SYSTEM A/C UNIT SCHEDULE

AIR PURIFICATION SCHEDULE

SHEET NO.

DRAWING TITLE

22 JULY 25

JOB NO.

REVISIONS

DRAWN BY

DATE

O N, G A

G P

W H

C O

U N

E #3

1401 Carter St. Suite 101 Chattanooga, TN 37402

(423) 267-9718 Fax: (423) 265-7879 E-mail: caengrs@caengrs.comCA CAMPBELL & ASSOCIATES, INC.

CONSULTING ENGINEERS

www.caengrs.com

C&A No. 24-035

M2.0

HVAC

SCHEDULES

GSJ

AutoCAD SHX Text

MARK

AutoCAD SHX Text

MANUFAC.

AutoCAD SHX Text

MODEL NUMBER

AutoCAD SHX Text

ELECTRICAL

AutoCAD SHX Text

EXHAUST FAN

AutoCAD SHX Text

COMMENTS

AutoCAD SHX Text

VOLTS/PH

AutoCAD SHX Text

FLA

AutoCAD SHX Text

MOCP

AutoCAD SHX Text

CFM

AutoCAD SHX Text S.P.

AutoCAD SHX Text

KH-1

AutoCAD SHX Text

DENLAR

AutoCAD SHX Text

DS-30-D

AutoCAD SHX Text 115/1

AutoCAD SHX Text 1.2

AutoCAD SHX Text 15.0

AutoCAD SHX Text

AutoCAD SHX Text 0.10

AutoCAD SHX Text

SEE NOTES

AutoCAD SHX Text

NOTES:

AutoCAD SHX Text

1. HOOD TO BE PROVIDED WITH A PRE-ENGINEERED, PRE-INSTALLED FIRE SUPPRESSION SYSTEM WITH A LOW pH CHEMICAL AMEREX 600…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Oct 27, 2025.