Tesa Secure Spec Sheet.pdf

tesaSecure

6973UID

tesaSecure

6973UID

tesaSecure

6973UID

tesaSecure

6973UID

tesaSecure

6973UID

tesaSecure

6973UID

n Can be engraved and die-cut in one easy step using Nd:YAG or CO2 lasers n Resistant to abrasion, grease, oils, and many other chemicals n Easily applied; no rivets or screws needed n Temperature resistant (-50°C to +200°C; -58°F to +392°F) n Custom sizes and shapes available n Flexible handling n Tamper evident n Economical n Peel and stick application tesa tape, inc. • 5825 Carnegie Boulevard, Charlotte, NC 28209 • 800-426-2181 • 800-LOV-TAPE • Fax 800-852-8831 www.tesatape.com • Email: customercare@tesatape.com

ISO 9001:2000 Certified • ISO/TS 16949:2002 Certified • ISO 14001 Certified technology that works tesa® Secure™ for Coding, Identification, and Marking tesa Secure offers a cutting-edge alternative to conventional coding, identification, and marking methods. As robust as metal plates, yet with the flexible handling associated with labels, tesa Secure 6973 laser labels are suitable for endless marking applications that require durability, flexibility, and resistance to forgery.

tesa Secure...

Suitable for UID – a “unique identifier” containing data elements used to track Department of Defense parts through their life cycles tesa Secure 6973 PV3 tesa Secure 6973 PV6

Material double layered double layered data carrier acrylic foil, acrylic foil, polymerized polymerized by electron beam by electron beam

Product / physical characteristics

• Thickness1 carrier without 118 µm 145 µm backing, including adhesive

• Adhesive1 resin modified, 25 g/m2 35 g/m2 high-performance, acrylic adhesive

• Liner1 compressed paper, 110 g/m2 110 g/m2 double-sided, plastic-coated, dimensionally stable

• Adhesion1 measured indirectly 3.3 N/cm 3.3 N/cm

Application characteristics

Adhesive P = permanent as per adhesive DIN 30646 N = low-temperature ‘Self-adhesive adhesive PNS labels’ S = for rough and/or non-absorbent surfaces

Adhesion2 to:

• steel 30 N / 25 mm

• aluminum 30 N / 25 mm

• polypropylene 10 N / 25 mm

• polyethylene 14 N / 25 mm

• polycarbonate 25 N / 25 mm

• ABS 28 N / 25 mm

• polyvinyl chloride 28 N / 25 mm Due to the brittle nature of the material, adhesion can only be measured indirectly. In some cases, the adhesion depends on the nature of the surface.The indicated adhesive values are for orientation only and intended as application aids.

Temperature resistance2

– 50°C to 200°C / –58°F to 392°F(Test of the resistance long term 250°C / 482°F (48 hours without visible changes)to high and low short term 270°C / 518°F (15 minutes without visible changes)temperatures, stuck to aluminum)

Weather as per DIN 53387, resistance2 2000 h / corresponding no changes to approx. 4-5 years

Climatic resistance DIN 50017 SWF and DIN 50016 SWF 2,0S

Salt spray as per SS DIN 50021, resistance2 240 h / 5% concentration, no changes 35°C, 95°F

Abrasion crockmeter test resistance at 200 strokes

Tabor / Abraser no changes CS 10.5 N / Pad at 300 strokes

Chemical distilled water + 65°C /+149°F, 300 hours resistance2 95% relative humidity + 38°C /+100°F, 168 hours

SAE 20 engine oil + 23°C /+73°F, 250 hours test petrol 60/95 + 23°C /+73°F, 0.5 hours caustic soda 10%, 200 hours sulphuric acid 30%, 300 hours transformer oil + 23°C /+73°F, 250 hours

Flammability US 302 self-extinguishing in glued condition

Surface as per resistance VDE 03003, T.2

> 1011 Ω, i.e. non-conducting

Dielectric as per strength VDE 03003, T.2

480 kVrms/cm

Breakdown as per voltage VDE 03003, T.2

5 kVrms/cm

Corrosion as per properties VDE 0340, T.2;

neither adhesive nor carrier corrosiveIEC 454.2 or

ASTM D1000

UL/CSA listing MH18055 / 113693 L000

Suitability for food evaluation according not applicableto the food regulations

Technical data (typical values):

1) Specification parameters 2) Application properties

Special product properties of tesa Secure 6973 n durable n tamper-evident n temperature resistant n abrasion resistant n chemical resistant n weather resistant tesa Secure 6973 PV3 available colors black glossy / matte - white text white – black text silver – black text tesa Secure 6973 PV6 available colors black glossy – white text

To learn more about the unique identification and Department of

Defense UID policy, visit:

www.acq.osd.mil/dpap/uid technology that works tesa tape,inc.2-2006