50017-D2700018-3.pdf

McNEtrSE S'I'ATE IJNIVIiRSITY .,1 .lItLillxt rl tln l nil.rritr o/ l.,,tilsnilt ,tt:'tdt)

PURCHASING DBPARTMENT

P. O. BOX 92415

I-q.KB CHARLBS. I,A. 70609

PH: 337-475-5083

FAX: 337-475-5082

DATE: October 13.2026ADDENDUM 03

BID FOR : New Maintenance and Storaee Facility. for McNeese State University, Luke Churles. Lo uisiana 70607

YOUR REFERENCE IS DIRECTED TO

PROJECT NO : 19-627-21-01. F.19002581. 01-107-058-13. F.010,04543

SOLICITATION NO. D27OOO18

SCHEDULED TO OPEN ON

Tuesdav. OCTOBER 20, 2026 AT 10 :00 A.M.

**************{,t(**t ********,*******{<*:t(*****************,!*{.**<*<**r(*t<*t(*)k****************r(******t<*,k

REVISION TO THE REFERENCED SOLICITATION/BID AS STATED BELOW:

r See the attached addendum items.

r ALL OTHER SPECIFICATIONS REMAIN THE SAME.

,k*,|(*)k*tr<,k***t<*16**t(*************r<*****r(*,t**r(*****t*x*{<*r<r<r<,!*t*t***,fi*,}*****i*r(**t(r.***t6,N*>t**>|(,|(t(tt(*t<**

THIS ADDENDUM IS HEREBY OFFICIALLY MADE A PART OF THE REFERENCED

SOLICITATION FOR BID.

DEBET HEBERT

PROCUREMENT SPECIALIST

McNeese State Universitv www. mcneese.eclu Excellenoe With A Personal Totrch" EEO/AA/ADA

Vincent - 5hows * Gaureaux, Architerts. ,apAtLC

ADDENDUM #3

New Maintenance and Storage Facility McNeese State UniversitY Rowdy Drive and Touchdown Lane

Lake Charles, Louisiana VSG Project No. 2456

Date lssued: October 7, 2026

IOIAL PAGES lN THIS ADDEND|IM= 9 PIGES /NCLUDING ATTACHMENTS

NOTE: The following clarifications, changes, additions, or deletions to the Drawings and

Specifications shall hlreby be incorporated into the Contract Documents for the above referenced pioject. This addendum supersedes all contrary and conflicting information contained in previous

Roitenoa, Drawings and Specifications and are hereby amended. Prime Bidders shall acknowledge receipt of all Addenda in the space on the Bid Form.

M

1. Sppcjflgg_ti.pggectign*g8411lSlug'rinury Wif'dows": Add the attached specification section for fixed. aluminum windows to project specifications

2. Drawinqa-2, Foqn$ation"..Plan: change hairpin rebar sizes from #3 to #5.

3. Drawinq A-1. g-elajl..#,.3: Note stating Liner Panel "INSULATION" should read'INSTAUATION"

4. Drawinq A-7. Detail#4": Liner panels are not "HORIZONTAL" type as indicated in note' Liner oanels are io be PaM type, reverse rolled as noted on Drawing #1lA'7.

S. Drawinq A-4, #1 Floor ptan: Cross section callout with "#A-5" should read #1/A-6".

AP CHITE

Drawings & Specifications, the@ the provisions of the Contract Documents, f ollowin g m anuf aclurerdproducts m ay be substituted.

PE99&8rery-Ce&Prs-e)-- MANUFACTURER PRADUCT m/emomp & tml scieens lsecton 101550) 4Sl Group

Stee/ Rack Sto rage Shelving Mecalux

Contractor shall note that prior approval may be by manufacturers name only. Prior approvals are based on a cursory review of limited data submitted. Listing in this document does not guarantee final acceptance ou1ng tne shop drawing review phase of the proiect. Contractor shall ensure that the prod'ucts used in preparation of his-proposat and proposed to be used on fhrs praiect are equivalent to 'that spe.cified in appearance, perfoimance, size, color, finish, installation type, and shape. Any materiai found to'n'ot be equivalent ta that specified will be reiected. Prior approval of one manufacturer does nat auiamatically prior approve any subsidiary company, parent conlpany and/or sr'sfer comp any and their assaciated products. Contractor shall take responsibility to ensure that dimension'al crtteria, materials, specified colorslfinishes, installations or sy_sfems .connected to the proposed product/manufacturer'tisted above are compatible. lf changes from original design are 'required due to alternative manufacturer, Cantractor assumes the responsibility to ensure proper

H. Curtls Vincent, AlA, Architect wrvw.vsgarchitects.com 1502 South Huntin$on street

Steven D. Shows, AlA, Architect Sulphur' l"ouisiana 70663 l0stin P. Gautreaux, AlA, Architect Phone: (337) 527-8137

Soffd P/asfc (HDPE)

SfeelShe/ving layout, coardination, instatlation & operations of att affected systems, structure, etc- required.

Attachments:

Speciiication Section 08411 "Aluminum Wndows'-7 pages

TATALPAGES

'N

THIS ADDENDIJM = 9 PAGES INCLUDING ATTACHMENTS

E n$ gf ,&f 9en{,Pry, Q-o, .$v r\ddendunr 83 - New Maintenance and Sforage Facility McNeese state Universify n-7-2A\tt Page 2

Nerv Maintenance and Storage fhcility McNeese Staie tJniversitY l.,ake Chorles, I.tlitisiana

SEC ION O84I I . ALUMINUM I.]Xb.D WINDOWS

PART I . CENERAI.

1.I RELA'TED DOCUMENI]S

A. IlrarvingB and general provisions of the Contract, inctuding Censml and Supplernentary Conditions and

Divisisn I Spccification Sections. apply to this Section'

I.? SI"JMMARY

.4,. Section Includes:

I . Alum inurn Fixed Window units @) Exterior'

a. Center Clazed, trnpaet resistant and "l'herrnally 8rcken'

B. I{elated Sections:

l. Division I Section "Glazing" forgLnss installed inafuminum storefroutframinganddoors'

I.3 DEFINITIONS

A ADA,/ABA Accessibility Grritlelines: U.S. Anhitectural & Transportation Barriers Compli'nce lloardb ,,Americanswith DisaUility Act (ADA) andArchitecturalBarriers Act(ABA) Acccssibilify Guidclines for

Buildings and Facilities."

t.4 PDRr.'ORMA$lCIiRtlqulnL:MtiNTS

A. Cieneral perlbmr2nce: 41:rninrrm-frarrled $ystemsshallwithstantltheeff ectsnf the follorvingperfonnance rcqulrernenrs rvithout excce,ding perl'ormaucecrileria or failure due to defcctive nranufacture.fabricatbn' insta lla.tion. or other defects in c()n structao n ;

L lv{overnents of suppgrting slrucrure indicatetl on Drawing;s including, but not linrited to, story drift ancl dcflectitrn from unillomrly distributed and ooncen{ratod live loads-

L Djmr:nsional tolcranccs of buildiugframe. and othcrad.iacent construction.

l, Fsilurc i,rcludes the following:

a. f)eflection exceedingspecified lirnits'

h. Thcrmalstu:sscs transt'crringto buildirtg strueture'

c. Frartrirrg mi--nb{ini transfbning stress"s, including those caused by thcrmal and structural nlovcrncnts to glazing

d. Noise or vibmtion crcarcd by wind and by thcrnraland stnrcturdl rnovcnrcnts.

e. Loosenirrg or weakening ol: firsteneri. altachments. and other cotnpolrents'

f. Sea lant la ilurc.

c. Failul: of nPcratingunits'

B. l)clcgatcd Design; Desiglr aluminurn-frarnedsysteurs,includingcotrtprehensiveengineering analysisbya quatitied prot-eisionalengrlleer, using pertbmrance reqnirentents and design criLeria indicated'

AI-LJM I NIJIVT.FITAN'IED FIXEI] WI NDOWS 0tt4l I - 1

Nerv N4aintenance and Storage Fucility N,lcNeese State lJ n iversitY Lake Charles, I-ouisitrtrir

(1. Stntctuni I l-oads:

ti.

l.

l) t . wirrd Loads: As retluircd by IBC 2021 cdition and A.scE ?-l 6 as indicatcd bclorv^

a. llasic Wind Sipeed: 132 rnph iVmph)-

b. Risk Catcgorl: II

c. Exposurc Clat*gory: C.

Deflcction of l;raming lvle nrbeml

l. t)rflcctinn Nonlal toWatl Planc: Limiie<] to li I75 r:f clearspanforspansupto l3 fcettrincbcs

(4.1 m){rudrol/240ofclearspanplus 1/4inch(6.35mnr)fbrsparsgreaterthanl3 lbet6incbes

(4. I m) or.an arnount tha t rcstricts cdgc dcflcction ollindividual glnzing litcs to 3/4 inctr ( I 9 rom ).

whichcvcr is lcss.

2. Deflectionparallel tgClazrngPlane: LinritedtoL/360ol'clearspanorl/Binch(3.2nrrn),lvhichever' is srn a llcr.

Structural-Tesr performance: Provirje alunrinurn-liamed syslems tested aocording to A^STM E 330 as follows:

L Whel 1e:;1e<l a t posit ivc a nd nega tivc \vind -loa d desigr Frcsstlres. systenrs do ttot cvidence deflecttrn exceedirt g slrecit'ied liur its.

2 \\rfren tested at 1,50 pr:rcent of positive and negativc u'ind-load design pressures, systcms' inr-'luding anchorage, do not evidence ma f eriu I fa ilures, structura I distress, a nd penn anent defomr atiorr o{'tnain frarrring ntembers exr:eeding 0.3 percent of span'

3. Test Dirations: As rcquircd by desigr wind velocity. but not fewer tha n l0 seconds'

Air lnfittration: provide ah:minurn-fnrnled systeots wirl.r mirximil|lr airleukagethruugh lixed glaeilg and frafiring arcas of 0.06 cfnrisq. {i. {0.03 Lr's pcr sq. nr) of fixcd wall arca whcn icsted according tn

ASTM 11 28i at a mininrtrtrr static-air-pressurc difference of 6'24 lbf75q' f1' {300 Pa)'

Watcr pcnr: tntlon nridcr Sriitic Prcssurc: Plovi<lr: alunrinum-fralncrd systcrns that do not cvidcncc watcr pc'utratienthraugh{ixcrJgliizingalci lnrmilgarcaswhentcstcdaccordingtoASTM ES3latatninknurt static-air*ressuo-diff*r"ri.* ofi0 percent olpositive rvin<l-load clesign pressure, but not less tban 624 lblTsq. ft. (300 Pa).

WaterpcnetrationundcrDyrralnicPressure: Pmvidealuminum-framedsystemsthatdonotcvidencewat4f, leakage througfi tixeit glaiing and fi:rming ateas when tested accordirrg to AAMA i0 l-l under dynamc prr*u*., equalto20 percentof positive rvind-load dcsign pressure, butnotless than 6.24lbilstL 11'(30CI

Pa).

I . i4 a x irn u rrr Wa ter l-,-1kage: No unconrrolle d wa ler pe netrating a lun, inum -frarned system$ or water appeari'gcn sysrenrs'normally exposed interior surfaces t-torn sources other than condensati:tl.

WaLer-leakage cloer rrot inclurle wiiter or)ntrolled by llashing and gutlers that is drained tr: exterior ancl watcr that cattr:l;t danragc adjaccni niaterials or firtishes^ l.hemrallvlor,€lnents: providealuntilruur-fiamedsysternslhatallorvlortliennsltl)ovelllenlsl€sultingfrorn thc following maxinrum chltngc (rangc) in arnbient and surl'acc tempcruturus. Basc engirrccring cah:ulatrrn on surtace tempelatttrgs ol'lnatcrials due to both solarheat ga'in and nigitttime-sky heat loss'

l. Te rlrperarute Changt: (Range): 120 deg F (6? deg c), anrbient; I tto deg u (t00 degC), material surta ccs.

2-. Tcsr pcrfbrmancc: No buckling; strcss on glassr scalant f'ailurc; cxccss slrcss on trnming anchors, atrcllastcrrcrs:clrreiJuctitlnofperlbrmancewhdntestcdaccor{illgtoAAMA50l.5'

(i

H

ALUMIN{JI{.TRAMED FIXE.D WINDOWS 0n41I -2

Ne',v Maintettance and Storage lracility McNecsc SLatc I JnivcrsitY l.ake Charles, I-ouisiatra

L, a.IlighHxtcriorAmbicnt-Air'I'cmperaturc;Thatrvhichproduces temperature o{' 180 deg F (82 deg C)-

b. l.ow Extcdor Ambicnt-Air Tcmpcnturc: 0 deg F {minus l8 deg

3. lntcrior Ambicnt-Air I'enrpcrature : 75 deg F (24 deg C)-

Condensatio, Rcst$tancc: .Prr;rvi4calurnitrum-liramcdsyslcmsl;!'ilh {'lxed glazing and {'r:rrningareashavlg contJ*nsatiorr-rcsi:-tance tacrilr{cRF)ol'notlesstllarr53wher'}testedaccordingtoAAMA 1503'

ThermalConrjuctancs: Itovirje aluminuln-t'mfircd systemsrvith fixetl glazirrg and liarningareashavilrgan average U-factor of not more tlran 0.69 Btui sq. fl. x h x deg }' 13'92 Wlsq. m x K) rvhen tested Bccording to A,A.MA 1503.

Sound Transmission: provirjc alunrinurn-framcd systcnrsrvitlr fixcd glaz-ilg and fianring arcashavirtgthc fb llowin g sound-tra nsnt issi.r;r c lra racle risticl :

l. SoundTransruissionl.lass(S1'C.): fulinirnunt35STCwhcnlestcdfbrlaboratorysoundtranstniss'un loss accorclingto ASfM [ 90 and detemrined by ASTlvl U4l 3

2, Outdoor-lndoorT'rarrsrnissiotr Clnss (OITC): Minimum 34 OITC when tested lbr laboratory sound tt.dnsnlission loss according to As f M li 90 and detennined by ASTM E 1332.

SUBMITTALS

product I)ata: For cach type of product indicatert. Inclurle construction details, matedal dcscriptions, rliutensions of in4iviclual corl poncnls ancl prof ilcs. and finishcs for a lutninunt -fiz rrcd systcms'

Shr:p []rawingi: For altttttjnuttt-fnttned systents' lncludc plans' elcvations' scctions' dctails' and a tla!:hIncntd t r (}thr:r rv(|rk.

t . Include tieta ils of prov isions Ior systiln cxpa nsiun and contraction a nd lbr' ,Jrlt itti] qg tl I ltrilislrlri: in the systeni to thc extcnor.

samples for verification: For eoch type of exposed lini"sh requirc<I, in manufacturer's standard sizes'

ProrjuctTest l.Leports: Baseil on evnlrrnlion ofcompreheruivelestsperfon:red by a qualified testing aBency' lbr a luminunr-{ramcd systcms. inclica ting coflrpliuncc with pcrfbnna ncc rcquircmcnts'

Mirlrttcriancr: Data: [-oralrrttrinunr -framed system.r to includc h matntcnattce manuals-

QT.:AL ITY ASSIjR ANCF, lnstallcr eualifications: Manufacturcls authorizc<i rcprcsentativc rvho is trairrcd and approvcd tbr insta lla lion o i units req u ired fo r t h is Project'

Tesriilg Agency Qualifications: Qualifietl accordingto ASTM E 699 t'Qrtesting indicated'

I:r.ginee ring Rr:sponsibility: Pn-.parc data l'aralurninum -f'rarned systcms, including Shop l)rail'ings' ba*xl on testing and e'gjneenn! oualysis olmanu{'actun:r's slanclard units in systems similar to those irrdicated an c).

cxlcrior nr cta l -surfact

K

1.5

A t.6

D

B, F..

lor this l)rojcct"

D. product Options: Inl,gmation on l}awingp and in Spccifications c-stablishcs rcquircnlcnts for syslctns' iiesthetic el'l'ects an<J perlonnance characteristics. Aeslhelic effecls are inclicaled by tliflrensions, AIUIVIINUM'FRAMED FIXED wtNDOwS 0841I-3

Nerv N{aintenance and Storage Fricility McNeese State IJnivcrsitY I-ake Charles, Louisiana amrngcnlcltts, aliglinrcnl, and profilcs of componcnts and asscmbircs as they rclatc to sightlincs' to orrc another, and t.r arJioir'ting ecnstrucrign. Perfonnance sharactelistics are indicated by ctiteria sub.ject to vetification b-v onc or more rncthotls inclurlirrg preconstruction tcstinS. ficld tcsting, and in-servicc perlbmtance.

l. Do not revise intenrJed aeslhetic effecls. as judged solely by ArchitEct, exccpt with Architect's approva t. If rcvisions arc proposcd, subm it cotnprchcnsive cxpla na tory data to fuch itcct tbr rcv icw.

E. Source Lirnitations fbr Alunrinum-Framed Systems: Obtain t'rorn single source l'rom shrgle manufacturer.

f . Welding Qualificarions: Q1alifl pmcedures and personnel according to AIVS Dl.2, "Strucfuml Weldittg

Codc - Alurninum'''

1.-/ I}RO.IEC'| CONDI"TIONS

A. Fir:11 Mcasurcmcnts: Vcrilyaciuullouatk)nsofstructuralsupportslbraluminum-t'ranrcdsystcrnsbyfichi measurernents bcfcrre f abricution and indicate neasurcntcnts on Shop Drarvings-

PART 2 - PRODI"ICTS

2.I II'IANU}.AC URERS

A Manulactureni/Products: SLrbject to compliance rvith requirenients. provide products by one of the lbllowittg i.

I, YKK AP:

a. Fixed Window'Systcm: YHS50TU

2. TIJBELITE,INC:

a. Fixed Windorv Slstcm: "ForccFront Stonn" Scrics T-14000 l\,{ATERIAI-S r\lulrinunr: Allgy and ternpcrrccommerrded tr'r' rtrartufactursr fortype uf usc and firrish indicrtted-

l. Sheel and Plate: A"S'LM tt 209 (AS'|M tl 209M1.

2. Hxtmdctl Bars. Rocls, Prnfilcs- and'I'ubcs: AS1'M B 2ll (ASTM I] 221M)'

l. Extnrdcd Structurat Pipe and Tubcs: ASTM B 429.

4. Structural Profilcs: ASTM B 308/B 108M.

5. Wclclilrg Rods and I,Jare Flcctrodcs: AWS 45.10/A5.l0M'

Stcel Rcintbrccmcnt: ManufacturcCsstflndardzinc-rich,conosion-resistantprimer.conrplyingrvithSSPC-pS Cuide No. 12.00; applicrl immediately after surf-ace pteFar:ltion and pretreatment. Select surfacc prcparario6 methgris accrrrcling to reconrmendations in SSPC-SP COM and prtpare surfaces accoding to applicahle SSPC standard.

I . Structura I Shapes. Platcs, and Ban: ASTlr4 A 361,4. 36M '

2. Cold-Rolled Sheel and Strip: ASTM A 1008/A 1008M'

3. Hot-Rolletl Shect and Strip: ASTM A l0i llA l0l lM' ft

AL(A4INUM.FR,\MED TIXED WII"{DOWS 0841 I -4

Nerv Maintenance atrd Storage Facility fulcNeese State tJniversitY Lake Ch arles, Ltluisiana

2 3 FRAN'I1N{i SYS'l'IlMs

A. Franring lvlcrnbcrs; VIanuJ"a,:turcr's standard cxtnrdcd-aluminunr f'ramingntcmbers of tiiickness rt:quired and rcirrlbrccrJ as rcquir.'d 1() support rmposed loads'

l. Construction: 1'hcnnally brokcn and lmpact Rcsislant'

2. clazing sysrcm: Rr...taincd rncchanically rvith dry gaskcts on lbursidcs.

3. Glazirrg Plane: Centcr.

4. Size: 2-l.i2" x 5"

ll. Brackets and Reinti)rccnrerltl;: Manul-acturefs slandanl high-strength ahtmitlrm wilh rronstainirtg nonlerous "^hi.ms for a ligpring systcm corupooent$-

C. FastcncriandAcccssoncs: Manuf'actrrrc/sstandardconosion-rcsistant,nonstaining'nc'rnblccdingfastcnus and accessories compatible with adjacent materials' l, Usc sclf-lockirrg deviccs whcrc lastcncrs arc subject to loosenirrg or tuming out from thcnrlal and stnlctuna I moYemen tsl wind loads, or v ibra tion'

2, I{einforce memben as requked to receive fastener llueads'

-1. tJse exposed fastencr.s with c$unte$unk Philtips screw hcads, tbbricated liorn slainless steel'

D. Concealed lihshing: Malut'aclurer's standard con-tision-resistanl, nonstoining nonbleeding flashing com patible'ivith adj a ocnt trl rr teria ls'

E. FramilgSysremCaskctsandsealants: Mauufacturet'sstandard,rcctrmmencledbymanufactun'r{briuint type'

2.1 CLAZIT*C SYSTIT.MS

.{, filazing: As spccificd in Division 8 Sccrion "Clazing'" i3. Glazing tjaskcts: Manutircturct's standard ctxrprcssion types; r'uplaceable. nrolded or extruded. of pnrfilc and irardnessrequired to ntlrinrain watertiSft scal'

c. spacers and setting Blocks: Msnufacture/s standard elastotrrenc type.

2.5 ACCESSORY MATERIAI.S

A. Jointsealsnts: Forisstallationatperlneterofalutnitrnm'fran:edsystetns,irsspecifiedinDivision TSection

"^loirt Scalants."

B. Bitumil6us p3 inr: Cokl,applic{, ilr+phalr-nla$tic paintcolnplyingwith SSPC-l)aint l2 rcquircments exccpt c6n1ailing no asbestos; fornrultrted tbr -1()-n:il (0.?fi2-rlrn) thickness percoat^

2.6 [,Al]l{l{lA'l'l0N

A Foun or cxtrudc alutninun shapcs bcforu finishing'

B, Wekl rn concealcd lor:ationt to grcatcstcxtent pos.siblc to minirnizc tli.storti<x or discoloration ol finish'

Remove weltl spauErand u,eklingoxicles l'rom exposed surl"aces by descalingorgrhding.

ALUMINUM.FR.\MED FIXED WI NDOWS 08411 -5

Nerv Maintenance and Storage lrrrcility fulcNecsc State University I.ake Charles. Lottisiarra

PART

3.t

I3.

3.2

I Framing Mcrnbcn. Gcncrat: Fabricatc components that, whcn assenrblsd, havc tlrc following ch a ra cteristics:

I . Profilcs thut arc sha4r, straight, and frec of clcfccts or dctirrmalions.

2. Accuratcly I'itted joints with errds copcd or mitered'

l. Means to dra in wa ter passing joints, condensa tion within ['ra m irtg members, and moislure tr: igptttng rvithin thc slstL'nr 1t' rxlctior-.

4. Phvsir:al anr.l tltemt;rlisoiatron of gl'aeing f'rorrr {rtrningfires]bers'

-5. Acc6nrrrroctirtrols {irr thenlul anci nrechanical tno\cmcnt:i oi'glazirrg aud frarning to mainuin required glazing edgc clear*nces'

6. Fa stcncn, a nchors,] ntJ conncction dc!'ices tha t a rc utt nsca lctl lio nr v icw to grca tcst cxtcnt po ssiblc '

Mcchanicalty Glazcd FranringMcmbcrs: Fabricatc forflush glazingwithout projectingstops.

Franring: Fabricatecnnrponent$forassetnblyusingshear-blocksystenl,screw-spline syslenlorheud-and-sill-rcceptor systenr with shcarblocks at intcnncdiate horizontal nlembers.

Aftcr fabriuatitin. clearly rlark coniporrents to identily thcir locations in Projcct according tti Shop

Drarvings.

High-pcrtbmrancc Organic Finish: ?-coat fluompolymcr linish complying with AAMA 2605 and coitainingnot lcss thui 70 pcn:cnt PVDF rcsiu by w'cight ir color coat. Prcparc. prctrcat' irrd apply coa Erg to exposed metal surfaces to cornply witlr coating and resin rnanufacfurets'lvritten instructions.

l. Minimum of 'tOYs liluoropolynrer rcsin forprgnium pcrformancc pcarlesccnt colors

Z. T1uo coa t system: Corrosion inhibiting primer at 0.2 nril. and durable higlr perlior:nance topcoat rt

1.0 mil. Minimum total dry thickncss or 1.2 mil'

i. Hardness: F minimtrnr

4. Gloss: N{edirrnr (25--1.5 (f! tiO )

5, {lrllor and {llosr; 5i:1cr:tcs! hyt\$;l-itg.{t ll{rrll \

3 - IXLCU'l'lON

EXAMINAI'ION

lxanrire arers and conctirions, rvith lnstaller present, for courplirrnce with rcquirements for ir:stallatior:

tulcmnccs a nd othcr cond itions a ftccting pe rl'ornr ancc o f'the Work' prosecd,,vith irrstallation only afterunsatist'actory sonditionshavcbeen com:ctcd.

INST'ALLATION

Genenil;

I

7.

l f)

Conr p ly rvith m a nu fa cturef s rwilten instruclions'

Do not irrstall datrraltcd oomporlrilrts.

!it jointsto ptoduc!, lruirlinc joints l"rt:e of bum and distortion'

Iligrrlly *ccrrrt non-ttro\ eltlctlt ioints I n sta lt o nchors rvith .rerpa m lors and isolators to prcvcn l mctal conosion and elcctrolytic drrtcdoca tion'

Sca lioints watcrti!,h1 unlcss othcnvisc intlicatcd' Fashion wirrdow sill flashingrvltcrc rain watcrrhc<ls lo i:x(criur'

D.

(i.

ALUMINUM.FRAMED FIXED WINDOWS 0841I -6

New Maintenance ancl Str:rage Farility McNeese State tJn iversity Lake Charles, Louisiana

tl. MetrlProtcction:

1, \&'bere aluminum will contactdissimilar rnetals, protcctagainstgalvanic actinnby paitrtingcontaot surtirces with primcr or applying scalant or fapc, or by insralling nonconductive spaccrs as rccomnt cndcd by n a tru fn cturer tor th is purpose.

2. Wliere aluminuur rvill contact conclele or ma$onry, prolect irgainsl conosion by paintlrg conl,act surlaces rvhh bituminous pain1.

C. f nstall conrponents to dmin water passirg joints, condensation occurring within framing members, and moisture migrating within the system to extetior.

D. Set continuous sill members and flasbing in full sealant bed as qpecified in Division 7 Section "Joint Sea la nts" to produce wea then ight insta lla t ion.

tt. lnstall compnnents plurnb:rnd truc in alignment with established lines and grades, and without warp or mck.

f . lnstall glazir:g as specified irr Division 8 Sectiott "Glazing."

G. Installperimeter joint sealantsas specitied in Division 7 Section "Joint Sealants" to produce weatherlighl installation.

3.3 ERECTION TOLERANCES

A. Install alurninun-frarncd systcms to conrply with the fbllowingmaxinrum crcction tolcranccs:

l. LocationandPlane: Limitvariationl'romtruelocationandplanetol/Sinchinl2tect(3mminli.7 n);114 incb (6 mm) overtolallenglh.

2. Alignnrent:

a. Where sur{aces abut in line, limit offset from true alipment to lll6 inch (1.5 mm).

b. Whcre suri'aces mect at comers, limit offset from true aligrrmeut to l/32 inch (0.8 mm).

B. DiaglrnalMeasulcmentsr I.irnit dilt'ersnce be tween diagonal rucasurcmonts to l/tl inch (3 rnrn).

END OF SECT]ON {)84I I

AI"I.,rMINLIM.FRAMED FIXED WINDOWS 0841 I -7