5.a 31025040_drw.pdf
PDF 492 KB Posted
- Solicitation number
- 475215
- Issued by
-
Department of Energy Office of Science
About this file
This is an engineering envelope drawing for the Central Cryogenic Compressor System Intercooler Vessel, produced by Brookhaven National Laboratory's Collider-Accelerator Department for the RHIC (Relativistic Heavy Ion Collider) facility. Drawing number 31025040, Revision A, was drawn by L. Demino on 04/18/24 and checked by J. Kandora on 8/19/25, with design approval from R. Lynch, engineering approval from P. Patel, and safety approval from R. Feder, all dated 9/25.
The vessel specifications include overall dimensions of 112.5 inches in length with a maximum diameter of 31.9 inches and a weight of 3,453.2 pounds. The vessel features eleven nozzle connections (FN1-FN11) with varying specifications: two 3-inch Schedule 40 welded-end inlet/outlet connections for water service, two 10-inch Schedule 40 welded-end inlet/outlet connections for helium service, one 2-inch NPT vent, two 2-inch NPT inspection ports, one 2-inch NPT drain, six 3/4-inch and 1/2-inch NPT test connections, one 1/2-inch NPT oil drain (plugged), and one anode connection (TBD). The drawing incorporates dimensional tolerances per ASME Y14.5 2009 and references specification documents SPEC-CAD-1372 Rev-A and 31025045 SOW Rev-A for interpretation. Vessel supports are required on two units only with provisions for forklift and pallet jack forks. The document is controlled under U.S. Department of Commerce Export Control Administration Regulations as EAR99 technology.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 5.c 31025042_drw.pdf | ||
| 4. SPEC_CAD-1372.pdf | ||
| 5.b 31025041_drw.pdf | ||
| 5.d 31025043_drw.pdf | ||
| 5.e 31025046_Utility_HX.pdf | ||
| 2. RFI Document 475215.pdf | ||
| 1. RFI Letter 475215.pdf | ||
| 3. BNL_RHIC_CRYO_IX&AX_RFI_V3.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
A
B
7 6 5
C
D
NOTES:
8 7 6 5
COLLIDER-ACCELERATOR DEPARTMENT
SCALE:
DRAWING NUMBER:
FINISH
APPLICATION
4 3
CATEGORY
Q.A.
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
USED ON DRAWING NO. QTY. PER ASS'Y.
BREAK SHARP EDGES
ANGULAR TOLERANCE �#�1�$�
DECIMAL TOLERANCES
.X �#� .030
.XX �#� .015
.XXX �#� .005
ACCORDANCE WITH
ASME Y14.5 2009
INTERPRET IN GENERAL
D
SIZE
SHEET OFWEIGHT:
UPTON, N.Y. 11973 D
W G
N O
REV.
O F
S H T
B
ER V
4 3 2
C
D
.03 MAX. MIN. 015
CREO
BROOKHAVEN NATIONAL LABORATORY
10.052.0
2X 21.0
14.017.0
6.0
3.5
2X 36.0
7.0 8.5
4X
THRU ONE WALL
.875
2X 45.0�$�
4X 20.0
28.128.1
22.283.3
4X 23.0
2X 6.25
2X 6.25
31.7
35.0
18.0
67.0
57.0
5.8
112.5
31.9
21.0
4X 16.50
2X 21.0
2X 24.0
2X 6.25
14.8
8X 17.0
1.25
RHIC
CENTRAL CRYOGENIC COMPRESSOR SYSTEM
INTERCOOLER VESSEL
31025040 A3
A
A 3453.2
REVISION APPROVALS
SUPVENGDESCHKBYDATEDESCRIPTIONECN NO.REV
------INITIAL RELEASE-A
31025041
1 1
ENVELOPE DRAWING
3/32DEPARTMENT
CHAIR
SAFETY / RSC
Q.A.
DIVISION
HEAD
CEE / CME
SUPERVISOR
APPROVAL R.FEDER 9/25
ENG / PHY
APPROVAL P.PATEL 9/25
DESIGN
APPROVAL R.LYNCH 9/25
CHECKED
BY J. KANDORA 8/19/25
DRAWN BY L. DEMINO 04/18/24
FN11 ANODE TBD - 3000# N.P.T. 1 ANODE
FN10 OIL DRAIN 1/2" - 3000# N.P.T. 1 PLUGGED
FN9 TEST CONN. 1/2" - 3000# N.P.T. 6 PLUGGED
FN8 TEST CONN. 3/4" - 3000# N.P.T. 6 PLUGGED
FN7 VENT 2" - 3000# N.P.T. 1 PLUGGED
FN6 INSPECTION 2" - 3000# N.P.T. 2 PLUGGED
FN5 DRAIN 2" - 3000# N.P.T. 1 PLUGGED
FN4 OUTLET 10" SCH. 40 WELD END 1 HELIUM
FN3 INLET 10" SCH. 40 WELD END 1 HELIUM
FN2 OUTLET 3" SCH. 40 WELD END 2 WATER
FN1 INLET 3" SCH. 40 WELD END 2 WATER
MARK SERVICE CONNECTION DESCRIPTION QTY REMARKS
PORT INDEX
1. ALL DIMENSIONS ARE FOR REFERENCE
2. VESSEL SUPPORTS ON TOP ARE ONLY REQUIRED ON (2) UNITS
3. SUPPORTS TO HAVE PROVISIONS FOR FORKLIFT & PALLET JACK FORKS AS SPECIFIED IN SPEC-CAD-1372 SECTION 3.3
INTERPRET IN ACCORDANCE WITH SPEC-CAD-1372 REV-A & 31025045SOW REV-A
FN11
FN7
BOLTED OR WELDED CONNECTION
TBD
FN5
FN10
SEE NOTE 2SEE NOTE 2
2X HELIUM PIPE
CUT OFF POINT
FOR FIELD ERRECTION
2X FN8
FN4
2X FN9
FN3
SEE DETAIL A
DETAIL A
SCALE 3/16
4X
SECTION B-B
4X WATER PIPE
CUT OFF POINT
FOR FIELD ERRECTION
2X FN6
FN1
4X FN8
4X FN9
FN2
FN2
FN1
THIS INFORMATION IS CONTROLLED BY THE
U.S. DEPARTMENT OF COMMERCE EXPORT
CONTROL ADMINISTRATION REGULATIONS
15 CFR PARTS 730-774 AS EAR99 TECHNOLOGY
APPROVED
ELEC APPVL IN
W
INDCHILL
| Sheet 1 |
| Views |
| FRONT |
| RIGHT |
| TOP |
| A |
| left_10 |
File details come from the government source that posted it. Updated .