Attachment B - Updated Specifications_2026_08_27 .docx

CSHG / SCRNG PLT 100-199 TPH

NR/NW RED HORSE

NSN 3820-00-060-1841

Mgt Code D793

Basic specifications and construction (Standard Equipment)

Minimum Configuration Standards developed IAW AFI 24-302, Vehicle Management, Section 1.4. Changes to this specification shall not be made without notification and approval from the Air Force Civil Engineer Center (AFCEC).

The vehicle and all furnished accessories shall comply with all Federal Motor Vehicle Safety Standards (FMVSS) in effect at the time of manufacture.

Air Force certified air transportable on C-17 and C-5 aircraft. For assistance contact the Air Transportability Test Loading Activity office at ATTLA@us.af.mil. Must comply with MIL-STD-1791 and MIL-STD-209.

The CSHG / SCRNG PLT 100-199 TPH is used for producing the surface materials of the expressway, gravels base materials for the high-quality road and airport runway, aggregates for the high-speed roadways, and airfield quality grade concrete and asphalt mix material.

Picture is for visual reference only; not meant to request specific brand

MACHINE REQUIREMENTS

· Capable of processing up to 200 Tons Per Hour producing a wide variety of coarse, medium and fine crushings

· Receiving Hopper: heavy-duty, steel reinforcement of side plates minimum: 6 fee x 15 feet top opening

· Vibrating Grizzly Feeder: 32 inch x 14 feet, includes 60 inch tapered step grizzly; nominal 1-1/2 inch openings, 20 HP @ 1200-1500 RPM, (TEFC) electric motor drive, mounted as integral part with hopper on common base NOTE TEFC: Totally Enclosed Fan Cooled

· Transition Hood: heavy-duty fabricated feed chute designed to accommodate vibratory type feeding mechanisms and dust suppression water spray bar(s)/nozzles

· Horizontal Shaft Impactor: Eagle Ultra Max Primary/Secondary, Weight – 21,700 lbs., 33 inch x 32 inch feed opening, exclusive fixed bar solid steel rotor, cast primary curtain, secondary curtain with wear resistant replaceable liners, hydraulic shim adjustment on secondary curtain, crusher housing split with hydraulic opening for access to rotor, curtains and replaceable liners.

· Blowbar removal tool included for removing and flipping blowbars

· Spring Bridge: primary curtain spring bridge assembly where each spring exerts a compressive force for additional stabilization of primary curtain

· Allows swing away under extreme loads, such as uncrushables; hydraulic adjustment

· Fines Bypass Chute: Critical for diverting material to the under-crusher gathering hopper

· Under-Crusher Gathering Hopper: heavy-duty steel plate with full length rubber flashing and replaceable liners

· Plant Conveyor: 36 inch wide for transporting crusher discharge material to the 2-deck screen, 20º troughing idlers, high impact urethane/rubber slider bed in loading area, return rollers, 15 HP, 1800-2100 RPM, TEFC electric motor drive

· Vibrating Screen: 4 feet x 12 foot, 2-deck, inclined, 10 HP, 1800 - 2100 RPM, TEFC, electric motor drive, stroke setting adjustable by weights, includes standard square opening screen cloth (sizes to be specified with order). Please note that additional screen cloth types are available and pricing can be quoted upon request

· Return Conveyor: 18 inch wide plant mounted for return of oversize material of top deck back to the crusher

· Minimums

· 20º troughing idlers, full length skirtboards

· 5 ½ HP, motorized head pulley

· 10 HP variable frequency drive for speed control; top 1/3 is hydraulic retraction for operation and travel

· Top Cross Conveyor: 18 inch wide for discharge of top deck material to the return conveyor with 20º troughing idlers, full length skirtboards with rubber flashing

· 4 HP motorized head pulley

· Bottom Deck Cross Conveyor: 18 inch wide; 4HP motorized head pulley

· Screen Fines Conveyor: 42 inch wide for discharge of bottom deck fines to the front of plant, 20º slider bed, under-screen gathering hopper with full length rubber flashing, discharge point for transfer of material to radial stacker

· 10 HP, electric motor drive

· Platforms and Railings: steel frame with metal floor, platforms and railings located at the crusher, engine or motor, and hopper for operation

· Main Trailer Frame: 24 inch wide flange beam side rails, air ride tri-axle suspension, air controlled brakes with signal and service gladhands, fifth wheel plate and kingpin, prewired running lights with stop, directional and 3 light marker bar

· Hydraulic Service Power: set of four (4) “stiff-leg” hydraulic cylinders controlled by an independent powered hydraulic unit complete with in-line load controls on each cylinder and directional control valves, includes all load controls for crusher adjustment and opening and closing of the impactor housing

· Drive Guards: formed sheet metal with wire mesh, complete with hinge type doors for easy access to pulleys and belts

· Central Control Panel: NEMA 4 type box, complete with all motor controls, emergency stop pushbutton,

· two extra 15 HP starters with quick disconnect plugs for radial stackers

· one dual 115 - volt plug

· Remote operator’s pendant with feeder stop and emergency pushbutton stop(s)

· Electric Power: 150 HP (460V), 1800 RPM, TEFC, electric motor drive with a 150 HP Soft Start Panel

· NOTE: Customer responsible for supplying electric power to control panels and special wiring as specified by local code

· Electric Variable Speed Feeder Control: 25 HP, adjustable frequency AC drive with remote variable speed switch

· Auxiliary circuit with starter installed in the central control panel for continuous fixed-speed operation

· Remote Feeder Start and Stop: remote control for starting and stopping feeder

· Maintenance Platforms: Right hand/left hand sides of screen with guarding for plant discharge conveyor included

PAINT/CORROSION PROTECTION

· Manufacturer’s standard color

· Maximum manufacturer’s factory corrosion/rustproof protection package throughout

· Minimum 5-year life expectant on rustproof/corrosion protection

· Automotive grade primer/paint NOTE: Powder coating not acceptable

PARTS and SERVICE MANUALS

· Complete set of manuals available at time of delivery to the Air Force, No Exceptions

· Includes parts breakdown, service manual and schedule, repair processes for any/all parts/components of machine, No Exceptions

· One (1) complete set of Operators, Parts and Service manuals to include drive engine, auxiliary engine (if equipped), transmission, and any/all mounted and/or attachments shipped with machine

· Provide diagnostic troubleshooting software/devices to end users

· Air Force vehicle maintenance personnel shall have capability to diagnose, troubleshoot, and service machine locally

· Diagnostics capable for all components of machine, No Exceptions

· All software and firmware shall function as intended, and shall be free of vulnerabilities (i.e. defects, bugs, malware, etc.), either intentionally or unintentionally inserted as part of the software/firmware throughout the lifecycle

· Any Windows-based software shall be compatible with Windows 10 (64-bit) operating system

· Vendor to provide maximum warranty available but not less than 24 months for any/all components of machine regardless of manufacturer of prime mover, accessory, and/or attachments as delivered to the Air Force

MANUFACTURER/DEALERSHIP will include

· Initial operator’s familiarization set-up (minimum 40 hours – on site)

· Initial maintenance familiarization set-up (minimum 40 hours – on site)

· Military Marking / Data Plate(s)

· Data plates will include the following information, at a minimum

NOMENCLATURE: __________________________

MAKE AND MODEL: ________________________

MFR’S SERIAL #: (VIN_______________________)

REGISTRATION #:___________________________

NSN: ________________________________

VEHICLE CURB WEIGHT: __________LBS

PAYLOAD, MAXIMUM: ____________LBS

GROSS WEIGHT, MAX: ____________LBS

GROSS WEIGHT COMB MAX: ______LBS

DATE OF DELIVERY: _________________

WARRANTY: __________MO___________MILES

CONTRACT #: ______________________

SHIP TO: _____________________

MARK FOR: __________________

US PROPERTY

Technical Data Requirements for US Air Force Purchased Vehicles

1. The Contractor/Vendor shall provide one copy of DD Form 1155, Order for Supplies and Services to the U.S. Air Force Program Office at the below listed address. DFARS Clause 252.227-7015 (Dec 2011) shall be listed in Section I of the DD Form 1155.

2. PSM – Hard copy of Operators, Parts and Service Manuals to be sent as pack-up data with each vehicle delivered. Also, manuals for any mounted or accessory equipment shall be provided.

3. PSME – Electronic copy of Operators, Parts and Service Manuals formatted in Indexed Portable Document Format (IPDF) to be sent to the following address. Only one electronic copy is required per order regardless of quantity of vehicles. Also, manuals for any mounted or accessory equipment shall be provided.

4. Manuals written to specific models, serial numbers shall have all differences identified and provided to the U.S. Air Force Technical Content Manager. Example, if a specific vehicle requires different technical manual coverage because of unique configuration changes, these changes shall be identified separately to the Air Force.

5. All data shall be supplied in accordance with DFARS clause 252.227-7015, December 2011

6. Shipping address for technical data packages:

Attn: Hannah Barton, Equipment Specialist AFLCMC/Support Equipment & Vehicles (SE&V) 235 Byron Street, (Bldg 300) Suite 19A Robins AFB, GA 31098-1813

COMM: (478)222-1829

hannah.barton.2@us.af.mil

BENEDYK, AFCEC, 850-381-0045, NOV 24

image2.jpeg image1.jpeg