4224855_PKGRQMT_REPORT.pdf
PDF 68 KB Posted
- Attached to
- TF33 1st Stage Compressor Blade Repair Federal contract opportunity
- Solicitation number
- FA812125R0036
About this file
This is a Packaging Requirements document (AFMC Form 158) for federal contract purchase instrument FD20302402324-01, Version 1, issued by the 406 SCMS/GULAA office under the Air Force Materiel Command (AFMC).
The document establishes packaging and marking standards for three line items (2840004399238RV, 2840DTH250051RV, 2840OAH250027RV), which comprise a set of two blades. All packaging must comply with MIL-STD-2073-1 (Revision E) for military packaging practices and MIL-STD-129 (Revision R) for military marking standards. The requirement specifies "MIL Long Line Packaging" at preservation level MIL and packaging level B. The vendor must individually wrap and cushion each blade to prevent chipping and nicking. Unit pack dimensions are 6.3 inches length and width by 18.5 inches depth, with a cube of 0.424, and a unit pack weight of 7.00 pounds. All wooden lumber, pallets, and containers must be constructed from debarked, heat-treated wood (heated to 56 degrees Celsius/133 degrees Fahrenheit for 30 minutes minimum) and bear certification/marking from an accredited agency recognized by the American Lumber Standards Committee (ALSC) to comply with United Nations phytosanitary restrictions on wood packaging material. Shipping containers must be marked per MIL-STD-129 and may require additional bar coding or identification information as specified on the AFMC Form 158. The packaging specialist is Verlisher M Strain, contactable at 405-582-9761 or 852-9761, with document signature dated July 31, 2025.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| GFP.pdf | ||
| DID_80503_ship_pack.pdf | ||
| DID_81535B_ASDPDR.pdf | ||
| DID_81634C_CAVAF.pdf | ||
| FA812125R0036.pdf | ||
| Final_Ordering_Procedures.pdf | ||
| 4224291_PWS.docx | DOCX document | |
| 4224856_TRNSPDATA_REPORT.pdf | ||
| DID_82256A_SCRM.pdf | ||
| DID_80441D_GPIP.pdf | ||
| CDRL_REPORT.pdf | ||
| DID_80969_Surge.pdf | ||
| DID_81995A_CDM.pdf | ||
| DID_81832_counterfietPP.pdf |
Show all 14
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PACKAGING REQUIREMENTS
PURCHASE INSTRUMENT NUMBER: FD20302402324-01 VERSION: 1
MIL-STD 129 REVISION: R MIL-STD 2073-1 REVISION: E
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES). WOODEN LUMBER, WOODEN
PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLET'S, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES" (ISPM)NO.15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
PACRN: PACKAGING REQUIREMENT: PRESERVATION LEVEL: PACKAGING LEVEL: SPI: SPI REV: SPI DATE:
AAC MIL Long Line Packaging MIL B
ITEM(S):
2840004399238RV 2840DTH250051RV 2840OAH250027RV
CODED DATA:
QUP ICQ
PRES
METH CD
PRES
MTL
WRAP
MTL
CUSH
DUNN CT
UNIT
CONT
INT
CONT UCL
SPEC
MKG
UNIT PACK
WEIGHT
UNIT PACK
LENGTH
UNIT PACK
WIDTH
UNIT PACK
DEPTH
UNIT PACK
CUBE OPI
1 AAA 10 1 00 ZZ JC A ED EC B 00 7.00 6.3 6.3 18.5 0.424 O
ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS:
SUPPLEMENTAL PACKAGING INSTRUCTION TEXT:
SET OF 2 BLADES. ZZ - (WMC): EA. INDIVIDUALLY WRAP & CUSHIONEACH BLADE TO PREVENT CHIPPING AND NICKING.
VENDOR PACKAGING INSTRUCTIONS:
Military Packaging and Marking Items shall be packaged in accordance with MIL-STD-2073-1, Standard Practice for Military Packaging. Shipping and storage markings shall be in accordance with MIL-STD-129, Standard Practice for Military Marking.
Shipping Container Marking Shipping containers shall be marked meeting the following criteria: (a) MIL-STD-129, Standard Practice for Military Marking. (b) Additional marking and/or bar coding requirements exceeding those of MIL-STD-129 (e.g., unit serial numbers, original equipment manufacturers (OEM) name, or OEM model number, as specified on the AFMC Form 158.
ORGANIZATION / OFFICE SYMBOL:
406 SCMS / GULAA
PACKAGING SPECIALIST:
Strain, Verlisher M
PHONE NUMBER:
405-582-9761 / 852-9761
SIGNATURE:
//SIGNED//Strain, Verlisher M
DATE:
25212 - 31 JUL 2025
Page 1 of 1AFMC 158 Version 1Generated by PRPS using Jasper Reports on 11 Aug 2025
File details come from the government source that posted it. Updated .