F10009710_-_PDF_1.pdf

This is a technical engineering drawing for a mounting plate assembly for solenoids 2 and 3, prepared for Fermi National Accelerator Laboratory, a facility operated by the United States Department of Energy. The drawing is revision-controlled documentation dated 04-Feb-2014 with signatures from T. Hamerl A and B. Unsee, indicating design approval and release authorization.

The mounting plate is constructed of 6061-T6 aluminum per UNS A96061 specifications and features dimensionally toleranced hole patterns and structural geometry scaled at 1:2. Key specifications include three 1-12 threaded holes with ±0.05 tolerance on diameter and ±1.125 tolerance on the perpendicular axis, and two ø½-13 UNC threaded holes with similar geometric tolerancing. Overall dimensions encompass a 20.58-inch length with multiple intermediate measurements (14.500, 18.076, 1.79 inches) and a 5.00-inch height with 3.50-inch offset positioning. The assembly includes mounting provisions and incorporates fastening requirements specified in the notes, which mandate that all parts be free of grease, oil, and chips, and that all sharp edges, corners, and burrs be removed. The document number is F10009710, sheet 1 of 1.