F00484505---DWG1.pdf

This is a technical engineering drawing for a room temperature solenoid valve solenoid package, prepared by Fermi National Accelerator Laboratory under the United States Department of Energy. The document serves as a conceptual design specification rather than a procurement solicitation.

The drawing details a solenoid assembly containing six pancake coils (17" × 3" × .54" turns) connected in series electrically and in parallel on water, with a solenoid peak field of 0.587 Tesla and current of 222.4 Amperes. Key specifications include vertical and horizontal dipole coils with #12 square heavy magnet wire, solenoid resistance of 0.583 Ohms at 1.05 kW power loss, water flow parameters of 0.0083 l/s per coil with 50 PSI pressure drop, and total solenoid weight of 135 kg (300 lbs). The package incorporates alignment nests, terminal blocks for McMaster part numbers, removable end flanges, and requires vacuum impregnation with epoxy. The assembly is designed for conceptual purposes only and not for fabrication, as noted on the drawing. No procurement dates, pricing terms, response deadlines, or contracting vehicles are specified in this technical documentation.