RFP 388000kmb Amendment 01.pdf
PDF 258 KB Posted
- Attached to
- Bar Grating and Saddle Clips
- Solicitation number
- 388000kmb
About this file
This is Amendment No. 01 to Request for Proposals (RFP) 388000kmb issued by Fermi Forward Discovery Group, LLC for bar grating and saddle clips. The amendment was issued on October 23, 2026, with an original RFP issuance date of October 21, 2026, and a bid due date of November 6, 2026.
The amendment provides technical clarification on seven specifications for the bar grating product: (1) grating bar center spacing of 19-W-4 with 1-3/16" on center spacing and bearing bars measuring 1-1/2" tall by 3/16" thick; (2) material composition of carbon steel; (3) smooth surface condition; (4) galvanized surface finish; (5) bar spacing designation of 19-W-4; (6) trim banding for end finishing; and (7) bearing bar thickness of 3/16". Bidders must acknowledge this amendment prior to the due date and time by either completing the SARC and PROC-FRM-466 forms or by email. Any changes to previously submitted bids may be made by email provided the correspondence references both the solicitation number and this amendment and is received before the due date. The procurement specialist contact is Karen Berger at Fermi Forward Discovery Group, LLC, P.O. Box 500, Batavia, IL 60510, MS 210, email kberger@fnal.gov, telephone 630-840-4344.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
AMENDMENT TO SOLICITATION
AMENDMENT NO.
DATE OF AMENDMENT:
10-23-2026
SOLICITATION NO.
RFP 388000kmb
DATE RFP ISSUED:
10-21-2026
PROJECT NO.
N/A
DUE DATE:
11-06-2026
TITLE OF PROJECT:
BAR GRATING AND SADDLE CLIPS
Bidders must acknowledge this Amendment prior to the hour and date set forth in the solicitation by one of the following methods:
1. By completing the SARC and PROC-FRM-466, or
2. By email.
If by virtue of this Amendment you desire to change a bid already submitted, such change may be made by email, provided such email reference the Solicitation and this Amendment, and is received prior to the due date hour.
The above reference Solicitation is amended as follows:
This amendment provides clarification to the technical specification:
1. Grating bar center spacing Response: Grating bar spacing is 19-W-4, 1-3/16” on center spacing. Bearing bar 1-1/2” tall x 3/16” thk
2. Material: Is the grating made of carbon steel?
Response: Carbon steel
3. Surface Condition: Should the surface be smooth or serrated?
Response: Smooth
4. Surface Finish: Is the required finish bare/mill finish, galvanized, or another finish?
Response: Galvanized
5. Bar Spacing: What is the required bar spacing (e.g., 19-W-4)?
Response: 19-W-4
6. End Banding: Is end banding required, or are standard saw-cut open ends acceptable?
Response: Trim banding
7. Bearing Bar Thickness: What is the required bearing bar thickness (e.g., 1-1/2" × what thickness)?
Response: Bearing bar thickness 3/16”
All other terms and conditions remain unchanged.
Fermi Forward Discovery Group, LLC P.O. Box 500 Batavia, IL 60510 M.S 210
Karen Berger Procurement Specialist III kberger@fnal.gov 630-840-4344
File details come from the government source that posted it. Updated .