A-W1-1 Rev B dtd 2019-8-15.pdf
PDF 268 KB Posted
- Attached to
- L053--Houston Onsite Inscriptions Solicitation Federal contract opportunity
- Solicitation number
- 36C78625R0001
About this file
This document is a technical drawing for a thin upright granite headstone to be used for government headstones and markers. The drawing provides detailed specifications for the dimensions, inscription layout, and finishing requirements of the headstone. Key details include the headstone size of 13" x 42" x 3", the inscription layout and centering tolerances, and the rounding and finishing requirements for the edges and corners.
The related federal contract opportunity is for a pre-solicitation notice for on-site inscription services at the Houston National Cemetery. The contract will be a firm fixed unit price requirements contract awarded to the responsible offeror whose proposal represents the best value, evaluated on factors of sample submission, past performance, technical approach, and price. The solicitation will be issued as a set-aside for small businesses under NAICS code 561990, with proposals due by September 10, 2024. The National Cemetery Administration is the federal agency issuing the solicitation.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 36C78625R0001 0002.pdf | ||
| 36C78625R0001 0001.pdf | ||
| A-NCIS-1 Rev C dtd 2019-08-05.pdf | ||
| 36C78625R0001 RFP Houston Onsite.pdf | ||
| A-EM-4 Rev H dtd 2017-12-23 (1).pdf | ||
| A-LFN _ OC-1 Rev C dtd 2016-6-13 (1).pdf | ||
| A-LFN _ OC-3 Rev C dtd 2016-6-13 (1).pdf | ||
| A-EM-6 Rev P dtd 2021-10-14 (1).pdf | ||
| A-EM-3 Rev H dtd 2017-12-23 (1).pdf | ||
| A-EM-2 Rev H dtd 2017-12-23 (1).pdf | ||
| A-W1-2 Rev B dtd 2019-8-15.pdf | ||
| A-EM Cover Page Rev P dtd 2021-10-14.pdf | ||
| A-J1 Rev A dtd 2019-09-04.pdf | ||
| A-NCIS-2 Rev C dtd 2019-08-05.pdf | ||
| A-LFN _ OC-2 Rev C dtd 2016-6-13 (1).pdf | ||
| A-EM-1 Rev I dtd 2017-12-23 (1).pdf | ||
| 36C78625R0001_1.docx | DOCX document |
Show all 17
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Date
Project No.
DrawnCheckedMarker Type
Project TitleDrawing Title
1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9
A B
C D
E F
DRAWING NO.
Sheet Of
A B
C D
E F
Approved: Director, Memorial Programs Service
Approved: Chief of Operations, Memorial Programs Service
A-W1-1
1 2
Signed
Signed
G
G
DO NOT SCALE THIS DRAWING
Location
Digital File
GOVERNMENT HEADSTONES
AND MARKERS
THIN UPRIGHT GRANITE HEADSTONE
KEE
AUGUST 15, 2019
W1
DateRevisions
ApprovedCheckedDrawn
AE Contractor
CSJ CSJIRN
PLANATE MANAGEMENT GROUP
3631 Ransom Place, Alexandria, VA 22306
13" X 42" X 3"
Description
6/5/2003--- SUPERSEDES DRAWING GU-33 DATED 3-22-99
1/29/2014A REMOVED TEXT CHART
8/15/2019B
SUPERSEDES DRAWING DATED 1/29/2014 INSCRIPTION
LAYOUT CENTERING AND TOLERANCE
GENERAL NOTES:
1. ITEM NUMBER IN INSCRIPTION BLOCK REFER TO INSCRIPTION SIZE AND
EMBLEMS OF BELIEF SHOWN ON DRAWING A-EM (SHEETS 1 THROUGH
5) AND A-LFN&OC (SHEETS 1 THROUGH 3).
2. EMBLEM OF BELIEF IS OPTIONAL.
3. ALL GRANITE DIMENSIONAL TOLERANCES ARE ±1/4" UNLESS
OTHERWISE SPECIFIED.
4. THE INSCRIPTION LAYOUT WILL BE CENTERED OFF OF THE CENTERLINE
AS MARKED IN SCENARIOS ABOVE. THE TOLERANCE FOR CENTERING
THE LINES OF INSCRIPTION IS LESS THAN OR EQUAL TO 3/16" ON EACH
SIDE OF THE CENTERLINE.
5. ROUNDING OF CORNERS NEED NOT EXTEND TO THE LOWEST 13
INCHES AND EACH SIDE OF THE LAST 13 INCHES MAY DISPLAY A
SMOOTHNESS SIMILAR OR EQUAL TO AN 65 GRIT FINISH OR SAW CUT
FINISH.
TYPICAL FRONT FACE OF STONE
SCALE: 5"=1'-0"
SIDE VIEW REAR FACE OF STONE
SHOWING CORRECT LOCATION
OF SECTION & GRAVE NUMBER
(SEE DWG. A-V1-2 FOR REVERSE
INSCRIPTION LOCATION if required)
3"
13"
5/8" 5/8" 5/8" 5/8"
S
E
P
L A
C E
M E
N T
D
T
A I L
S
E
D G
E
R
A D
I U
S
T
O
E
X T
E N
D
P
A S
T
G
R O
U N
D
L
E V
E L
1/4" RADIUS ±1/16"
TOP AND SIDE EDGES
(FRONT AND BACK)
C
L
C
L
C
L
C
L
ITEM L-4
EMB EMB EMB
EMBEMBEMB
EMB EMB
ITEM L1
R
A
D
ITEM L1
ITEM L1 ITEM L1
ITEM L1
ITEM L1 ITEM L1
ITEM L1
ITEM L1
ITEM L1
ITEM L1
ITEM L1ITEM L1
ITEM L1
ITEM L1
ITEM L1
ITEM L1
ITEM L1
ITEM L1
ITEM L1
ITEM L1
ITEM L1
ITEM L3
ITEM L3
ITEM L3
ITEM L3
ITEM L3
ITEM L3
ITEM L3
ITEM L3
ITEM L3
ITEM L3
ITEM L3
ITEM L3
ITEM L3
ITEM L3
ITEM L3
ITEM L3
ITEM L3
ITEM L3
ITEM L3
ITEM L3
ITEM L4
ITEM L4
ITEM L4
ITEM L4
ITEM L4
ITEM L4
ITEM L4
ITEM L4
ITEM L4
ITEM L4
ITEM L4
ITEM L4
ITEM L4
ITEM L4
ITEM L4
ITEM L4
ITEM L4
ITEM L4
ITEM L4
ITEM L4
ITEM L4
ITEM L4
ITEM L4
ITEM L4
ITEM L3
ITEM L3
ITEM L3
ITEM L3
ITEM L3
ITEM L3
ITEM L3
ITEM L3
ITEM L3
ITEM L3
ITEM L3
STANDARD HEADSTONE
SCALE: 2 1/2"=1'-0"
9 LINE INSCRIPTION PLACEMENT
AND DETAIL
10 LINE INSCRIPTION PLACEMENT
AND DETAIL
11 LINE INSCRIPTION PLACEMENT
AND DETAIL
11 LINE INSCRIPTION PLACEMENT
AND DETAIL
8 LINE INSCRIPTION PLACEMENT
AND DETAIL
7 LINE INSCRIPTION PLACEMENT
AND DETAIL
6 LINE INSCRIPTION PLACEMENT
AND DETAIL
7 LINE INSCRIPTION PLACEMENT
AND DETAIL
8 LINE INSCRIPTION PLACEMENT
AND DETAIL
MEMORIAL HEADSTONE
SCALE: 2 1/2"=1'-0"
GROUND LINE
LIMITS OF
INSCRIPTION
AREA
(CONTRACTOR -
DO NOT INSCRIBE
THIS LINE - FOR
REF. ONLY)
GROUND
LINE
LIMITS OF
INSCRIPTION
AREA
GRAPHIC SCALE 5" = 1'-0"
0 50.5 1 2 3
A-W1-1.DWG 24" x 36" SHEET
SEE
NOTE 1
BELOW
AutoCAD SHX Text N
AutoCAD SHX Text C
AutoCAD SHX Text A
AutoCAD SHX Text
ATIONAL
AutoCAD SHX Text
EMETERY
AutoCAD SHX Text
DMINISTRATION
AutoCAD SHX Text U
AutoCAD SHX Text N
AutoCAD SHX Text I
AutoCAD SHX Text T
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text S
AutoCAD SHX Text T
AutoCAD SHX Text A
AutoCAD SHX Text T
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text M
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text A
AutoCAD SHX Text E
AutoCAD SHX Text N
AutoCAD SHX Text T
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text V
AutoCAD SHX Text E
AutoCAD SHX Text T
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text A
AutoCAD SHX Text N
AutoCAD SHX Text S
AutoCAD SHX Text A
AutoCAD SHX Text F
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text I
AutoCAD SHX Text R
AutoCAD SHX Text S
| Sheets and Views |
| A-W1-1 |
File details come from the government source that posted it. Updated .