36C78625R0001 RFP Houston Onsite.pdf

PAGE 1 OF 1. REQUISITION NO.

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NO. 5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

a. NAME b. TELEPHONE NO. (No Collect Calls) 8. OFFER DUE DATE/LOCAL

TIME

9. ISSUED BY CODE 10. THIS ACQUISITION IS UNRESTRICTED OR SET ASIDE: % FOR:

SMALL BUSINESS

HUBZONE SMALL

BUSINESS

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

WOMEN-OWNED SMALL BUSINESS

(WOSB) ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

8(A)

NAICS:

SIZE STANDARD:

11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

12. DISCOUNT TERMS

13a. THIS CONTRACT IS A

RATED ORDER UNDER

DPAS (15 CFR 700)

13b. RATING

14. METHOD OF SOLICITATION

RFQ IFB RFP

15. DELIVER TO CODE 16. ADMINISTERED BY CODE

17a. CONTRACTOR/OFFEROR CODE FACILITY CODE 18a. PAYMENT WILL BE MADE BY CODE

TELEPHONE NO. UEI: EFT:

PHONE: FAX:

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN OFFER

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK BELOW IS CHECKED

SEE ADDENDUM

19. 20. 21. 22. 23. 24.

ITEM NO. SCHEDULE OF SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

(Use Reverse and/or Attach Additional Sheets as Necessary)

25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Govt. Use Only)

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA ARE ARE NOT ATTACHED.

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN _______________ 29. AWARD OF CONTRACT: REF. ___________________________________ OFFER COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DATED ________________________________. YOUR OFFER ON SOLICITATION DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY (BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED SET FORTH HEREIN IS ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

30b. NAME AND TITLE OF SIGNER (TYPE OR PRINT) 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER (TYPE OR PRINT) 31c. DATE SIGNED

AUTHORIZED FOR LOCAL REPRODUCTION (REV. NOV 2021)

PREVIOUS EDITION IS NOT USABLE Prescribed by GSA - FAR (48 CFR) 53.212

7. FOR SOLICITATION

INFORMATION CALL:

STANDARD FORM 1449

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30

36C78625R0001 08-26-2024

Katherine Iacovelli 09-13-2024

1PM

43C1 Department of Veterans Affairs NCA Contracting Service

18434 Joplin Rd Triangle VA 22172

X 100

X

Y

561990

$16.5 Million

N/A

X

Houston National Cemetery 10410 Veterans Memorial Drive Houston, TX 77038

43C1

Department of Veterans Affairs NCA Contracting Service

18434 Joplin Rd Triangle, VA 22172

43C1 http://www.tungsten-network.com/customer -campaigns/veterans-affairs/

1-877-752-0900

See CONTINUATION Page

This solicitation is for onsite inscriptions at Houston National Cemetery

Funding will be obligated on Task Orders.

Submit questions only by email by 8am Est September 3, 2025 to: katherine.iacovelli@va.gov

SUBMIT PROPOSAL VIA EMAIL to: katherine.iacovelli@va.gov

COR: TBD

Please fill this out:

UEI:

EMAIL ADDRESS:

PHONE #:

See CONTINUATION Page

X X

X 1

Katherine Iacovelli Contract Officer

36C78625R0001

Table of Contents

SECTION A

A.1 SF 1449 SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL PRODUCTS AND

COMMERCIAL SERVICES

SECTION B - CONTINUATION OF SF 1449 BLOCKS

B.1 CONTRACT ADMINISTRATION DATA

B.2 PRICE SCHEDULE

B.3 STATEMENT OF WORK

B.4 CEMETERY INFORMATION AND MAP

SECTION C - CONTRACT CLAUSES

C.1 52.212-4 CONTRACT TERMS AND CONDITIONS—COMMERCIAL PRODUCTS AND

COMMERCIAL SERVICES (NOV 2023)

C.2 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

C.3 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT

STATUTES OR EXECUTIVE ORDERS—COMMERCIAL PRODUCTS AND

COMMERCIAL SERVICES (FEB 2024)

SECTION D - CONTRACT DOCUMENTS, EXHIBITS, OR ATTACHMENTS

Attachment 1 Definitions Attachment 2 Contract Discrepancy Report (CDR) Attachment 3 Sample Review Form for (J1) 3”, Flat Granite Marker Covers Attachment 4 Sample Review Form for (I1/H1) Marble-Granite Niche Attachment 5 Sample Review Form for (W1) Upright Headstone Attachment 6 Weekly Status Report Format Attachment 7 Appendix B - Transfer of Blank Government-Furnished Property Attachment 8 Appendix C – Completion of Inscription Service(s) Attachment 9 Wage Determination Attachment 10 NCA Safety Checklist Attachment 11 VAAR 852.219-75 VA Notice of Limitations on Subcontracting—Certificate of Compliance for Services and Construction Attachment 12 Past Performance Questionnaire

SECTION E - SOLICITATION PROVISIONS

E.1 52.212-1 INSTRUCTIONS TO OFFERORS—COMMERCIAL PRODUCTS AND

COMMERCIAL SERVICES

E.2 52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE

E.3 52.212-2 EVALUATION—COMMERCIAL PRODUCTS AND COMMERCIAL

SERVICES (NOV 2021)

E.4 INSTRUCTIONS TO OFFERORS--COMMERCIAL ITEMS

Submission Information for Samples Submission Information for Written Part of the Proposal Rating Standards

E.5 52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS—COMMERCIAL

PRODUCTS AND COMMERCIAL SERVICES (MAY 2024)

SECTION B - CONTINUATION OF SF 1449 BLOCKS

B.1 CONTRACT ADMINISTRATION DATA

1. CONTRACT ADMINISTRATION: All contract administration matters will be handled by the following individuals:

a. CONTRACTOR:

b. GOVERNMENT: Contracting Officer 36C786

Department of Veterans Affairs NCA Contracting Service 18434 Joplin Rd Triangle VA 22172

2. CONTRACTOR REMITTANCE ADDRESS: All payments by the Government to the contractor will be made in accordance with:

[X] 52.232-33, Payment by Electronic Funds Transfer—System For Award Management

3. INVOICES: Invoices shall be submitted in arrears:

Other [X] monthly after acceptance by Government

4. GOVERNMENT INVOICE ADDRESS: All Invoices from the contractor shall be submitted electronically in accordance with VAAR Clause 852.232-72 Electronic Submission of Payment Requests.

http://www.tungsten-network.com/customer-campaigns/veterans-affairs/

5. ACKNOWLEDGMENT OF AMENDMENTS: The offeror acknowledges receipt of amendments to the Solicitation numbered and dated as follows:

AMENDMENT NO DATE

6. CONTENTS OF INVOICE:

• Contractor Information (Name, Complete Address, Telephone Number, Taxpayer Identification Number)

• Date of Invoice

• Date of Period of Invoice Performance

• Invoice Number

• Obligation/Invoice Number (Only one purchase order may be included on each invoice submitted)

• Cemetery Name

• Unit Cost

• Total Invoice Amount

• Service/Item(s) provided

7. SOLICITATIONS:

Failure to submit all required documentation as required may result in your submission being determined non-responsive and removed from further consideration.

8. MISSING PAGES:

It is the responsibility of the offeror to examine this solicitation to verify that he or she has received all pages. In addition, in compiling this package, some pages may have been duplicated. If the offeror feels that pages are missing or duplicated, the offeror is encouraged to contact the Contracting Officer at the telephone number shown in Block 7B, Standard Form 1442, Solicitation / Contract / Order for Commercial Items.

9. TIME OF DELIVERY:

Work is to be performed Monday through Friday, 8:00 a.m. – 4:30 p.m., except Federal Holidays.

10. POST AWARD CONFERENCE:

Prior to commencement of work, contract awardee and a representative of all subcontractors are required to attend a post award conference with Contracting Officer’s Representative and Contracting Officer/Specialist to assure that all parties understand all contractual obligations and the role that each party serves.

11. GOVERNMENT HOLIDAYS:

Holidays observed by the Federal Government:

New Year's Day 1 January Martin Luther King's Birthday Third Monday in January President's Day Third Monday in February Memorial Day Last Monday in May Juneteenth June 19 Independence Day July 4 Labor Day First Monday in September Columbus Day Second Monday in October Veterans Day November 11 Thanksgiving Day 4th Thursday in November Christmas Day 25 December

If a holiday falls on Sunday, the following Monday will be observed as the legal holiday. When a holiday falls on a Saturday, the preceding Friday is observed as a legal holiday by U.S. Government agencies.

Also included would be any day specifically declared by the President of the United States of America as a national holiday.

B.2 PRICE SCHEDULE

BASE YEAR: October 1, 2024 – September 30, 2025

OPTION YEAR 1: October 1, 2025 – September 30, 2026

CLIN DESCRIPTION

EST

QUANTITY UNIT UNIT

PRICE EST TOTAL PRICE

0001 J1, Marker, Thin Flat, 3” Granite, Inscriptions

175 EA

0002 H1, Niche Cover, Granite, Inscriptions

EA

0003 W1, Headstone, Granite, Upright, Inscriptions

0004 R2, Headstone, Granite, Upright, Reverse Inscription

382 EA

ESTIMATED BASE YEAR TOTAL

CLIN DESCRIPTION EST

QUANTITY UNIT UNIT

PRICE EST TOTAL PRICE

1001 J1, Marker, Thin Flat, 3” Granite, Inscriptions

175 EA

1001 H1, Niche Cover, Granite, Inscriptions

1002 W1, Headstone, Granite, Upright, Inscriptions

1964 EA

1003 R2, Headstone, Granite, Upright, Reverse Inscription

382 EA

ESTIMATED OPTION YEAR 1 TOTAL

OPTION YEAR 2: October 1, 2026 – September 30, 2027

CLIN DESCRIPTION EST

QUANTITY UNIT UNIT

PRICE EST TOTAL PRICE

2001 J1, Marker, Thin Flat, 3” Granite, Inscriptions 175 EA

2002 H1, Niche Cover, Granite, Inscriptions 860 EA

2003 W1, Headstone, Granite, Upright, Inscriptions 1964 EA

2004 R2, Headstone, Marble, Upright, Reverse Inscription 382 EA

ESTIMATED OPTION YEAR 2 TOTAL

OPTION YEAR 3: October 1, 2027 – September 30, 2028

CLIN DESCRIPTION EST

QUANTITY UNIT UNIT

PRICE EST TOTAL PRICE

3001 J1, Marker, Thin Flat, 3” Granite, Inscriptions 175 EA

3002 H1, Niche Cover, Granite, Inscriptions 860 EA

3003 W1, Headstone, Granite, Upright, Inscriptions 1964 EA

R2, Headstone, Marble, Upright, Reverse Inscription

382 EA

ESTIMATED OPTION YEAR 3 TOTAL

OPTION YEAR 4: October 1, 2028 – September 30, 2029

CLIN DESCRIPTION

EST

QUANTITY

UNIT

UNIT

PRICE

EST TOTAL PRICE

4001 J1, Marker, Thin Flat, 3” Granite, Inscriptions 175 EA

4002 H1, Niche Cover, Granite, Inscriptions 860 EA

4003 W1, Headstone, Granite, Inscriptions 1964 EA

R2, Headstone, Marble, Upright, Reverse Inscription

382 EA

ESTIMATED OPTION YEAR 4 TOTAL

ESTIMATED BASE YEAR TOTAL

ESTIMATED OPTION YEAR 1 TOTAL

ESTIMATED OPTION YEAR 2 TOTAL

ESTIMATED OPTION YEAR 3 TOTAL

ESTIMATED OPTION YEAR 4 TOTAL

ESTIMATED AGGREGATE CONTRACT TOTAL

B.3 STATEMENT OF WORK

1.0 Background

The Department of Veterans Affairs (VA), National Cemetery Administration (NCA) furnishes headstones, markers and niche covers (monuments) for deceased veterans worldwide. Memorial monuments are also furnished to memorialize veterans whose remains are non-recoverable.

2.0 Purpose

The purpose of this contract is to provide On-Site Inscription Services for Houston National Cemetery;

10410 Veterans Memorial Drive; Houston, TX 77038

3.0 General

The Contractor shall provide all equipment, labor, utilities, shed(s) and materials necessary for startup and performing onsite inscription services using Cemetery inspected and approved, Government owned headstones, markers and niche covers.

4.0 Performance Period

The Contractor shall follow the below time periods to ensure the start of the inscription process takes no longer than 30 calendar days. If the Contractor face challenges with the initial set-up period, a written explanation should be submitted as soon as possible to inform the Cemetery Director, Alternate Contract Officer Representative (ACOR), Memorial Products Service Contract Officer (COR) and the Contract Officer of the issues being faced and the resolution and timeline involved. If no notification is submitted, it is assumed the Contractor will adhere to the timelines set below.

4.1 Performance Period – Initial Set-up: The Contractor shall have 25 calendar days from date of award to establish an on-site inscription facility to include all requirements noted in: On-Site Inscription Blasting Structure, Cemetery Requirements and Contractor’s Quality System below.

4.2 Performance Period – Initial Order: The Contractor shall have 30 calendar days, from date of award, excluding federal holidays, as counted from the date following the day the first order is sent to the Contractor and until the monuments are inscribed and delivered to the Cemetery, FOB Destination.

4.3 Performance Period – On-going: The Contractor shall have 10 business days, excluding federal holidays, as counted from the date following the day an order is sent to the Contractor until the monuments are inscribed and made available to the Cemetery for receiving inspection and acceptance.

5.0 Government Furnished Property

Upon receipt of blanks through Appendix B (refer to Use of Appendix B – Transfer of Government- Furnished Headstones, Markers or Niche Covers and Appendix C– Completion of Inscription Service(s) Process Responsibilities found in Section D of the RFP), the Contractor shall be responsible for the security and protection of the blanks, which are considered Government furnished property, provided to the Contractor in connection with this contract. All blanks and inscribed headstones that do not meet the specifications pre-and post-inscription shall be considered rejects and the quantity shall be reported to the Cemetery point of contact (ACOR) and to MPSProgSupport@va.gov.

The Contractor shall be responsible for damage sustained to blanks because of negligent handling practices while in the Contractor’s possession.

6.0 Scope of Work

6.1 Contract Period: This contract covers the period from October 1, 2024 thru September 30, 2025 with four (4) 1-year options, if exercised, to extend the term of the contract through September 30, 2029.

7.0 Workmanship

mailto:MPSProgSupport@va.gov

Monuments shall be free from defects due to broken or blown out lettering. Repairs or patching of any such defects or the presence of oils, scuff marks, glue, crayon marks, direct adhesive and excessive dust shall be a cause for rejection.

8.0 Product

8.1 The Contractor shall inscribe all information contained on an order. The end or limit of each line shall be indicated on a line-by-line basis as shown on the order. If any deviation from this is encountered, the Contractor must contact the MPS Program Unit at MPSProgSupport@va.gov.

8.2 Inscriptions shall be made using an air blast abrasion with a suitable non-hazardous aggregate.

The inscription shall have depths consistent with what is referenced in the technical drawing and shall conform to the dimensions of letters and inscriptions as shown on the drawings. The layout of letters, numbers and emblems shall conform to scenarios in the technical drawings.

8.3 Lithichrome Application: When placing an order, each Cemetery shall annotate in the Remarks box or on the last line of the inscription, whether lithichrome is required or not. Cemetery shall enter “ADD LITHICHROME” or “NO LITHICHROME” for all orders. When lithichrome is applied, it shall be N4 or lower as judged against the Munsell Neutral Value Scale, Matte (31-step scale). If any order is received without lithichrome stated, then the Contractor shall contact the ACOR for clarification or the order shall be e-mailed to the MPSProgSupport@va.gov for clarification.

9.0 Contractor Requirements

On site inscription services shall begin no later than (30) days after Contractor award date. Before submitting a bid, it is the responsibility of the Contractor to perform due diligence for the contract requirements, and for the Cemetery’s site requirements, and to examine the pre-determined location of the sandblasting area within the Cemetery property.

10.0 On-Site Inscription Blasting Structure

If a facility is not already at the site for Contractor use, Contractor shall be required to provide and maintain a secure portable structure(s) to perform sandblasting operations, store equipment and for possible curing of headstones prior to sandblasting. The structure (s) shall be built so work can proceed without regard to weather conditions and power outages.

The site for the blasting structure/storage and inspection area shall be located within the Cemetery property in the areas shown in diagram in Section B.3 located below.

• Shed/structure can be manufactured of wood or metal but shall be portable and temporary.

• Shed/structure is to be placed on concrete deck block or cinder blocks, tied down or secured in case of extreme weather conditions.

• Contractor is not authorized to form, pour or subcontract out for a cement foundation or piers for the shed(s) on Cemetery property without written authorization and approval by the Cemetery director, ACOR, MPS-COR and the contracting officer.

• Two (2) portable sheds can be built or moved to the location selected by the Cemetery with one setup for sandblasting of headstones/markers and the second used for equipment storage, documentation order generation, cutting of stencils, etc. An area that is undercover can be constructed for drying and prepping of the stones.

• Electrical power is to be supplied by either a Contractor-owned or rented generator or by the local power company through which the Contractor would affect coordination and establish purchasing arrangements. Before any installation of electrical power by the local power company, the plan must be pre-approved by the Cemetery director and MPS.

• If water is required and not on the location, the Contractor is responsible for bringing in water for use in the sandblasting operation.

• Dust handling equipment shall be in place within the sandblasting shed before inscription services begin. The dust handling system needs to capture dust grit from the sandblasting operation and not allow the dust to ventilate to the outside environment.

• The structure shall abate noise to <60 dBa within 500 feet of the sandblasting facility so as not to disturb visitors or disrupt services at the Cemetery.

• A portable toilet shall be brought into the location since Contractor personnel are not permitted use of the Cemetery restrooms.

• Contractor is responsible for all inscription related waste clean-up and its disposal off the Cemetery’s premises.

• Contractor is to use a non-hazardous sandblasting material and have obtained an SDS (Safety Data Sheet) for the material which shall be at the on-site location for inspection.

• Any hazardous substance or liquids that is used in the inscription operation, i.e., gasoline or diesel fuel for a generator, lacquer thinner, lithichrome, etc., shall be handled, stored, and transferred in accordance with all OSHA, EPA, and DOT laws, regulations, and recommendations.

• If at the beginning of the contract, the pre-determined sandblasting location is only temporary due to Cemetery construction, the Contractor is responsible for moving his property to a new permanent site location when it becomes available. The Contractor shall have 15 days to relocate or arrange for the relocation of his equipment and buildings.

• At the end of the on-site contract or sooner, if an option year is not renewed, the Contractor shall be responsible for removing his property to include portable sheds, awnings, equipment, etc., and shall have (15) days to accomplish this and is responsible for repairing and/or restoring the site to its original condition. If the Contractor fails to remove equipment or shed within (30) days of contract expiration or cancellation, the Contractor agrees that ownership of the property will be transferred to the Government.

11.0 Cemetery Requirements

11.1 Checking-In Upon Arrival: Every day that the Contractor is planning on performing inscriptions on R2s, the Contractor shall check in with a pre-determined Cemetery Representative upon arrival to the Cemetery and to provide the representative a listing of the R2 inscriptions that shall be completed on that day. This listing should include the decedents’ name and section/grave number for each decedent’s gravesite. Representative will inform Contractor of nearby scheduled interments and Contractor shall arraign the work schedule as to not disrupt the interment. At a mutually agreed upon time, the Contractor is required to provide the ACOR a listing of the inscriptions that were completed.

11.2 Authorized Working Hours: All work for contract performance at the Cemetery shall be performed between the hours of 8:00 a.m. and 4:30 p.m., local time, Monday through Friday, excluding Federal holidays. Work performed during non-duty hours, weekends and holidays will be at the discretion and authorization of the Contract Officer who will consult with any or all of the following:

Cemetery Director, ACOR, MPS-COR and/or Foreman. Authorization requests shall be submitted in writing to the Contracting Officer, COR and ACOR in the same email. Approval will be written, and work will be at no additional cost to the Government. Work during non-duty hours, weekends and holidays will not be a substitute for not working during the regular work week.

11.3 Impact on other Cemetery Operations: The Contractor agrees to phase all work in a manner that does not impact with Cemetery operations. As a general rule-of-thumb for gravesite engraving and work involving power equipment should not take place within 1,000 feet (305m) of an on-going committal service or ceremony. If R2 inscriptions are completed at the gravesite, the surrounding area will be required to be cleaned up after the Contractor has completed the sandblasting process.

11.4 Conduct on Cemetery Property: While performing work on Cemetery property, Contractor personnel shall adhere to the following standards of dress and conduct. These standards and regulations are enforceable under Title 38, U.S.C., Section 218.

11.4.1 National cemeteries are shrines; Contractor personnel appearance and conduct shall always be professional and unobtrusive. All Contractor personnel shall wear long pants while on Cemetery grounds unless approved in writing by the Cemetery director.

11.4.2 Contractor personnel shall not sleep on Cemetery grounds, sit, and lean or stand on erected headstones, or put equipment or materials on erected monuments, nor lean or place any equipment or materials on erected monuments.

11.4.3 Questions from Cemetery visitors shall be politely referred or directed to Cemetery personnel.

11.4.4 Contractor personnel will behave with appropriate decorum, courtesy, and respect while within the Cemetery or at its’ perimeter or entrances. Shouting, cursing, use of personal radios, angry outbursts, sleeping, intoxication, smoking, spitting, unsafe driving of private or company vehicles, and violence or criminal acts of any kind shall not be tolerated and are cause for immediate removal from the Cemetery, and shall jeopardize the Contractor’s chance of receiving an award a future contract or the renewal of a current contract.

11.4.5 The Contractor shall ensure all motor vehicles used in this contract meet State Inspection, safety, licensing, registration, and insurance requirements. All contract personnel operating vehicles shall have a valid driver’s license.

11.4.6 Garments displaying a “message” or slogan” other than the Contractor’s business name are prohibited. Offensive tattoos shall be covered.

11.4.7 Public restrooms at the Cemetery are for visitors only. The Contractor is responsible for either providing a portable toilet that is maintained and kept clean or using restroom facilities off-site.

11.4.8 Breaks and lunch while on Cemetery property shall be taken in areas approved by the Cemetery administrator.

11.4.9 At least one Contractor staff member must speak fluent English when the Contractor is working on Cemetery grounds.

11.4.10 Personnel shall remove all personal protective equipment, such as eye/or face protection, respiratory protection, and gloves, as well as required protective clothing/garments before leaving the worksite.

11.5 Safety Requirements: Contractor shall meet all requirements of VA Policy, OSHA 29 CFR 1910, Occupation Safety and Health Standards for General Industry and 29 CFR 1926, Safety and Health Regulations for construction and applicable Federal, state and local regulations., including:

11.5.1 Submit copies of all applicable OSHA-required programs.

11.5.2 Certify that every designated onsite employee has completed applicable training and certifications required by OSHA and other Federal, state and local regulatory agencies.

11.5.3 Provide a Safety and Health written program and training/certification.

11.5.4 Provide a written Project Emergency Action Plan when applicable.

11.5.5 Shall maintain on site and readily accessible current hazard communication program, current chemical inventory and copy of Safety Data Sheets (SDS) or all chemicals on the inventory/on site and readily available when workers are onsite. Contractor must provide the CO/COR/ACOR/Cemetery Director with a list of hazardous materials that will be used on the job. Quantities of single container, 30 gallons or more of hazardous chemicals must be reported to the CO/COR/ACOR/Facility prior to bringing the chemicals on site. Ten gallons or more in a single container must have secondary containment and spill response material available.

11.5.6 Must notify the ACOR/COR/CO/Cemetery Director prior to generating hazardous waste. The Contractor is responsible for removing all hazardous waste generated from the project from the property.

Chemicals must be stored in secondary containers to prevent storm water contamination. Hazardous waste requiring a manifest for disposal will have a completed manifest returned to the COR/CO/ACOR/Cemetery Director, and NCA Environmental Protection Specialist within 30 days of the manifested waste leaving the site.

11.5.7 Cemetery’s responsible person or ACOR shall arrange Contractor orientation including sharing information regarding facility Safety & Health programs, a facility overview, and a worksite walk-through.

11.5.8 Complete NCA Contractor Safety Orientation Checklist.

11.5.9 Supply required Personal Protective Equipment (PPE) for the work being performed. Minimum PPE consists of safety glasses and hardhats meeting ANSI standards and safety toe work boots meeting ASTM standards. and safe work boots from the start of the contract until completion. Contractor is responsible to ensure anyone on the site is in correct PPE. Additional PPE may be required based on job-specific hazards. N95 and other respiratory protection require medical approval and fit testing. Hearing protection, gloves, etc. must be worn when related hazards are present.

11.5.10 Bodily injury, property damage incidents, and near misses must be immediately reported to the COR/CO/ACOR/Cemetery Director, and Facility Collateral Duty Safety Officer. This does not relieve Contractors of OSHA or insurance carrier reporting requirements. The Contractor shall conduct an accident investigation. The ACOR/CO/COR/Facility and the Collateral Duty Safety Officer must be copied on the investigation report within 30 days of the incident.

11.5.11 Conduct and document jobsite safety and environmental inspections on the jobsite. A weekly inspection report must be completed by the Contractor of the project. Additionally, the ACOR/CO/COR/Facility and Collateral Duty Safety Officer will perform safety, health and environmental inspections. The CO has the authority to stop work if imminent safety and health hazards are identified or if unsafe work practices are occurring. Immediate corrective actions are required for hazards identified as presenting medium or high risk as determined by the Collateral Duty Safety Officer.

Contractor must reply to CO/COR with corrective actions.

12.0 Post Award Conference/Periodic Progress Meetings

The Contractor agrees to attend any post award conference convened by the contracting activity or contract administration office in accordance with Federal Acquisition Regulation Subpart 42.5. The Contracting Officer, primary MPS Contracting Officers Representative (COR), Cemetery’s alternate Contracting Officers Representative (ACOR) and other Government personnel, as appropriate, may meet periodically with the Contractor to review the Contractor's performance. At these meetings the contracting officer will apprise the Contractor of how the Government views the Contractor's performance and the Contractor will apprise the Government of problems, if any, being experienced. Appropriate action shall be taken to resolve outstanding issues. These meetings shall be at no additional cost to the Government.

12.1 Primary Contracting Officer Representative (COR): The COR will be identified by separate letter. The COR monitors all technical aspects of the contract and assists in contract administration. The COR is authorized to perform the following functions: assure that the Contractor performs the technical requirements of the contract: perform inspections necessary in connection with contract performance:

maintain written and oral communications with the Contractor concerning technical aspects of the contract: issue written interpretations of technical requirements, including Government drawings, designs, specifications: monitor Contractor's performance and notifies both the Contracting Officer and Contractor of any deficiencies; coordinate availability of Government furnished property, and provide site entry of Contractor personnel. A letter of designation issued to the COR, a copy of which is sent to the Contractor, states the responsibilities and limitations of the COR, especially regarding changes in cost or price, estimates, or changes in delivery dates. The COR is not authorized to change any of the terms and conditions of the resulting order.

12.2 Alternative Contracting Officer Representative (ACOR): The ACOR will be located at the Cemetery level, selected by the Cemetery Director and identified by a separate letter. The ACOR monitors all aspects of the inscription process to include: inspection, acceptance and transfer of blanks (Appendix B); monitoring of the inscription area and Contractor personnel; inspection of finished inscriptions to include quality, depth, blow-outs, lithichrome application (if required); comparison of inscribed monuments with the BOSS MOAR report; reporting to the CO and COR any deviations or issues pertaining to contract performance; maintain written and oral communications with the Contractor maintaining files until contract expiration; partner with COR to complete CPAR requirements on a timely basis. The ACOR is not authorized to change any of the terms and conditions of the contract.

13.0 Government Quality Assurance (QA)

13.1 Site Inspections: Quality assurance (QA) inspections of the Contractor’s manufacturing facility and of the completed on-site work at Cemetery shall be conducted during the contract period by the designated COR of the Memorial Products Service, Program Support Unit and the designated alternate Cemetery COR to assure contract performance. Visits to the Contractor and the Cemetery shall be scheduled at a time to ensure inspection of the Contractor’s production. The Government reserves the right to perform quality audit inspections without prior scheduling or notifications to the Contractor.

13.2 During each QA visit, a complete assessment of the Contractor’s operation shall be made, to include the following areas:

13.2.1 Performing quality inspections

13.2.2 Maintaining QA records indicating the quality of the inscribed headstones and,

13.2.3 Maintaining a working area, including storage building, sandblasting and other equipment, in a manner that follows state or other environmental and health regulations.

13.2.4 The Contractor shall ensure that copies of all relevant Government-provided drawings for production of headstones/markers under each contract are maintained on file and are available to the designated COR, upon request, during on-site Quality Assurance inspections.

14.0 Contractor’s Quality System

The Contractor must submit a quality assurance plan and maintain a written inspection system that documents the quality and timeliness of finished monuments. The Contractor shall provide, to the designated MPS-COR and the Cemetery ACOR, reports on the Contractor’s progress and delivery of orders. Report must include number of blowouts, and number stones damaged upon receipt to facility.

Please see Addendum 3 for the acceptable format that the weekly status report will be maintained and forwarded. Weekly reports must be emailed to MPS at MPSProgSupport@va.gov , attention to the designated COR by the close of business, Tuesday of each week. Should this day fall on a holiday, the report must be submitted no later than the next business day. Each report must include the following information:

Weekly Status Report:

• Location (Cemetery name)

• First Name

• Last Name

• Shipping Prefix

• CBL Number

• Delivery Order #

• Date order was received

• Date Est Comp (15 days) example

• Date Cancelled (e-mail response date)

• Date Completed

• Carrier’s name & tracking number

• Delivery Date (delivered to location)

• Received by (who signed for the delivery)

• Identify the number of blanks that were scrapped each week (due to blowouts, breakage, change in inscription, inscription error, etc.)

If any order is completed late or projected to be completed beyond the contractually required due date, the Contractor shall identify the reason(s) for the delinquency, what actions are underway to resolve the tardiness, and the projected future date for completion (projected completion dates which are before the reporting date are unacceptable).

If an order is delinquent at the time that the status report is emailed to the MPS Program Support Unit, the Contractor shall provide, in the same email with the report, the reason(s) for the delinquency, what measures the Contractor is undertaking to remedy the causes of the current delinquency, and the date the Contractor expects to become current with orders.

14.1 Quality Complaints: The Contractor is responsible for the performance of all inspections and quality assurance required by this contract. The Contractor shall develop and maintain a written inspection system that documents the quality of all finished products resulting from the inscription of Government headstones. The Government reserves the right to perform any inspections deemed necessary to assure headstones are supplied in accordance with the specifications of the contract.

14.2 The receipt of a quality complaint or a quality audit inspection indicating non-compliance with the specifications/contract shall be considered reason for a visit and review of the Contractor’s quality assurance program. The Government reserves the right to impose 100% Government Quality Inspection for an indefinite period due to quality problems. Indicative, but not all-inclusive, examples are:

14.2.1 Nonconforming on headstone/niche cover inscriptions

14.2.2 Completed on site upright marble inscriptions and marble niche inscriptions that passed the Contractor’s inspection system but fail the Quality Inspection of the designated COR

14.2.3 Deficiencies that adversely affect performance of the contract existing in areas such as:

• Inspection system

• Inspection personnel

• Manufacturing process

• Production control

• Planning and scheduling

• Employee training

• Safety

14.3 When issue(s) arise regarding an inscription on a monument not meeting the specifications standards and the issue(s) cannot be resolved between the Contractor and Cemetery’s ACOR, the discrepancy will be routed to the primary COR within MPS. If further action is needed, the Contracting Officer shall make a final determination as to whether the monument shall be replaced at Contractor’s or at Government’s expense.

14.4 Contractor Records and Files: The Contractor shall maintain records and files of all documents relating to each order filled under each Government Headstone and Marker contract. Said files shall minimally contain, manufacturing quality assurance checklist, final inspection and acceptance reports, Delivery Order Numbers, dates completed, and date invoiced. Said files are in addition to any similar information provided to or by the Government and shall be available upon request to the designated COR during on-site quality assurance inspections.

15.0 Processing of Orders and Time of Delivery

15.1 Email Address: Contractors shall provide a single email address for electronically receiving orders. Orders shall be electronically distributed by MPS to the Contractor’s provided email address, Monday thru Friday mornings, excluding federal holidays. Contractors shall complete orders on a first in/first out basis, except for those items where accelerated delivery is requested. Each order for Normal delivery shall be produced in numerical sequence, by shipment number (FIFO – first in, first out).

15.2 Normal delivery: All monuments except for those identified for accelerated delivery shall be manufactured, inspected and released to the Cemetery within 10 business days following the date the order was sent by MPS.

15.3 Accelerated Request (Casualties of War): It is the goal of NCA to ensure the grave of active duty service members who die because of enemy action is marked on the day of interment. When the Cemetery director is made aware of a pending burial request for a U.S. casualty of war, they will provide to MPS the inscription who will in turn contact the Contractor to expedite the order. The Government will provide the inscription to the Contractor with not less than two 2 calendar days advance notification and advise the Contractor when the inscription needs to be completed. All inscriptions identified as an accelerated delivery shall be provided at no additional cost to the Government for the accelerated processing.

15.4 Inscription Correction/Cancellations of Orders: Occasionally, it shall be necessary to request from the Contractor that a correction is made or that an order be cancelled. These corrections/cancellations shall be forwarded by e-mail to the Contractor only by the MPS Program Support Unit and within one (1) business day of receipt of the order. The Contractor will be required to respond to each e-mailed request from the MPS Program Support Unit within one (1) business day following receipt of the correction or cancellation.

15.5 Replacements-in-Kind: It may be occasionally necessary to order an emblem, symbol, or format which differs from current approved forms. These rare occurrences must be provided by the Contractor as replacements- in-kind at no additional cost. The Cemetery will provide a photo to MPS to ensure the replacement reflects the inscription of the original headstone.

16.0 Use of Appendix B – Transfer of Government-Furnished Headstones, Markers or Niche Covers and Appendix C – Completion of Inscription Service(s) (Process Responsibilities) (Reference Section D)

16.1 The Contractor is NOT responsible for unloading pallets of Government-owned blanks from delivery trucks, nor for ensuring the number of pallets and monuments match what is stated on the bill of lading, nor for signing the bill of lading. The Contractor is NOT responsible for the inspection of blanks upon delivery.

16.2 Cemetery Personnel are responsible for the storage of the newly received Government-owned blanks until they are inspected by Cemetery Personnel, and their receipt is acknowledged by the Contractor using the Appendix B – Transfer of Government-Furnished Headstones, Markers or Niche Covers form.

16.3 Cemetery Personnel are responsible for transferring to the Contractor a pre-determined quantity of Government-owned blanks by completing the Appendix B - Transfer of Government-Furnished Headstones, Markers or Niche Covers form.

16.4 Cemetery Personnel will complete the top portion of the Appendix B, check the appropriate box and insert the quantity and monument type that is being transferred to the Contractor.

16.5 The Contractor shall confirm the quantity of blanks being transferred and accept and sign the bottom of the form. Both the Contractor and the Cemetery should retain a copy of the transfer for their records.

16.6 The Contractor is responsible for setting up the Government-owned blanks for inspection by Cemetery Personnel. If any rejects are identified due to chipping, inappropriate coloration, etc., the Cemetery is responsible for the storage and eventual disposal of the rejected blanks. The quantity of rejects should be noted on the transfer form along with date and name of Cemetery Personnel performing the inspection. The Cemetery is responsible for notifying MPS of the rejects and supplying photos.

16.7 The Contractor takes possession and is responsible for the care and protection of blanks following the Cemetery staff’s inspection of the blanks. The Contractor shall be responsible for the cost of damage to blanks or inscribed monuments while in their custody.

16.8 The Contractor processes inscription orders and displays the completed inscribed monuments for inspection by Cemetery personnel per Appendix C following the Contractor’s own required quality control actions. Pre-release review by the Cemetery does not relieve the Contractor of responsibility for performing an effective review of quality prior to turning inscribed monuments over to the Cemetery. This should occur in a pre-determined location within the Contractor’s inscription area.

16.9 The Contractor will be responsible for completing Appendix C – Completion of Inscription Service(s) form (Addendum 5). The Contractor will complete the top portion of the form, checking the appropriate monument type box and inserting the quantity of monuments that are ready for final inspection by Cemetery personnel. Shipment numbers will be inserted for each monument completed. The Contractor will inform the Cemetery that monuments are ready for final inspection. This should be at a pre-determined, mutually agreeable time as established between Cemetery and Contractor Personnel.

16.10 Critical: Cemetery is to inspect R2 inscriptions completed at the gravesite on a daily basis prior to close of business.

16.11 Cemetery personnel are responsible for a final inspection and acceptance of the completed monuments utilizing the Monument Order Acknowledgement Report (MOAR). Any rejects will be noted on the form (Appendix C) and the Cemetery inspector (COR) will sign and date for the Cemetery. Both parties should retain a copy for their records.

16.12 The Cemetery will be responsible for scanning and emailing a copy of the Appendix C form, to the MPS COR, which will be used when certifying invoices for payment by the Contractor.

16.13 The Cemetery will be responsible for the removal of inspected and accepted monuments out of the inscription area. The Cemetery will also be responsible for updating BOSS with the receipt date, which should match the date on the Appendix C form.

16.14 Rejects

16.14.1 The Cemetery is responsible for the destruction and disposal of blanks that are rejected prior to being turned over to the Contractor. (Refer to Appendix B)

16.14.2 The Contractor shall dispose of all rejected work within 60 calendar days of rejection. Disposal means destroyed so no part of the inscription is legible, removal from Cemetery property, and discarded so no part of the monument can be used for any other private or public purpose. (Refer to Appendix C)

16.15 Reorder of Rejected Inscribed Monuments

16.15.1 The Cemetery will be required to reorder any rejected monuments through BOSS. Cemetery will contact MPS with the rejected and replacement order number. MPS will forward the information to the Contractor and the replacement marker will be expedited at no cost to the Government.

16.15.2 The original order that was rejected will be received in BOSS and then rejected selecting a code for the reject.

17.0 Procedures (Administrative and other)

17.1 Government Responsibilities

• MPS shall email formatted orders on weekdays, when available, to a Contractor’s self-designated email address.

• Within 2 workdays, MPS or the Cemetery ACOR shall clarify formatting questions regarding ordered items or advise the Contractor as to whether extra time is needed to provide a reply. The Contractor shall submit questions to MPSProgSupport@va.gov for MPS to provide guidance regarding questionable circumstances.

• Questions or issues regarding processing of an order, which cannot be resolved through submission to MPSProgSupport@va.gov, shall be routed by MPS to the Contract Officer for resolution.

18.0 Performance Evaluation

a. Normally, the COR will verbally advise or give a written inspection report to the Contractor of discrepancies the first time they occur and ask the Contractor to correct the problem. A notation will be made on the COR checklist of the date and the time the deficiency was discovered and the date and time the Contractor was notified.

b. If the Government created any of the discrepancies, these will not be counted against the Contractor's performance. When the Government has caused the Contractor to perform in an unsatisfactory manner, the COR will forward a written notice to the responsible organizational element requesting corrective action be taken.

c. When the Contractor is not meeting the acceptable limits of satisfactory performance, a Contract Discrepancy Report (CDR) will be issued to the Contractor. The seriousness of the failures should govern whether to issue CDR at the end of the period, or as soon as the limits of satisfactory performance are exceeded. When a CDR is issued, the Contract Officer and/or the COR may exercise any contractual remedy available for non-performance, in accordance with FAR 52.212-4, “Inspection and Acceptance”.

When a CDR is received, the Contractor shall complete the applicable CDR blocks. The Contract Officer will evaluate the Contractor's explanation and determine the next course of action.

d. The issuance of a CDR, found in Attachments, may be cause for the scheduling of a meeting among the Contractor, Contracting Officer, and the COR. A mutual effort will be made to resolve all problems identified. The Government will prepare written minutes of the meeting. The Contractor, Contracting Officer, and the COR will sign minutes of the meeting(s).

e. Should the Contractor not concur with the minutes, they will so state their objections in writing to the Contracting Officer, within ten calendar days, and also explain the reasons for non-concurrence.

The Contracting Officer will review and consider the reasons submitted for the Contractor's non-concurrence and make a decision to revise or uphold the comments as written. The Contracting Officer will notify the Contractor of the decision in writing within ten calendar days of submission of any objections.

f. After a CDR is given and the vendor's plan accepted by the CO/MPS COR, the vendor shall have 1 month to carry-out the plan. After 30 calendar days, if there are any examples of missed standards then a remedy shall apply.

g, If the Contractor does not achieve satisfactory performance by the end of the next period or agreed suspense date, further actions may be considered including, but not limited to termination for default. If the Contractor only achieves a partial satisfactory performance by the end of the next period or agreed suspense date, another CDR should be issued as well as in interim CPARS.

19.0 Employee Requirements

a. The Contractor shall be responsible to ensure Contractor employees providing work on this contract are fully trained and completely competent to perform the required work. All work performed shall be done at a minimum to the specs and in accordance with good commercial practices.

b. Small Business set-aside: all of the awardee’s managerial/supervisory employees including those on site in supervisory roles shall be direct hires of the Prime Contractor. Labor shall be employed such that 50% of the actual salaries and wages for time attributed on this contract are from actual Prime Contractor employees.

c. Labor Force and Equipment: The Contractor shall be aware of the intensive labor and equipment requirements needed to meet contract specifications. Contractor shall be responsible to provide all labor and equipment as necessary to meet deadlines. The Contractor shall provide all necessary resources to complete the efforts assigned under the scope of this contract.

20.0 Invoicing: Invoices ae sent through Tungsten after acceptance at delivery.

21.0 Point of Contact at MPS: E-mail to: MPSProgSupport@va.gov

B.4 CEMETERY INFORMATION AND MAP

1.0 Address and Contract Information

10410 Veterans Memorial Drive Houston, TX 77038 Telephone: (281) 447-86860 POC: Roy Luera Director ALT: Celethia Reed, Asst Director ACOR: Angel Hernandez

2.0 Specifications:

a. Description #1: Marker, Granite, Thin, Flat, 3” Inscriptions Product Code: J1 Drawing No.: A-J1, Rev A, dtd 2019-09-04

b. Description #2: Niche Cover, Granite, Inscriptions Product Code: H1 Drawing No.: A-NCIS-1, Rev C, dtd 2019-08-05

c. Description #3: Upright Headstone, Granite, Inscriptions Product Code: W1 Drawing No.: A-W1-1 & 2, dtd 2019-08-15

d. Description #4: Upright Headstone, Granite (Rear Face), Inscriptions Product Code: R2 Drawing No.: A-W-2, dtd 2019-08-15

a. Inscription Specification: Letters, Fonts, Numbers & Other Characters for Government, Headstones, Markers and Niche Covers Drawing No.: A-LFN&OC-1 thru 3, Rev C, dtd 2016-06-13

b. Emblems:

Drawing No.: A-EM Cover Page, Rev P, dtd 2021-10-14 A-EM-1, Rev I, dtd 2017-12-23 A-EM-2 thru 4, Rev H, dtd 2017-212-23 A-EM-5, Rev L, dtd 2021-04-13 A-EM-6, Rev P, dtd 2021-10-14

3.0 Reverse inscriptions of (W1, upright granite headstones) will be inscribed as noted below.

a. Inscribed in the dedicated sandblasting area after cemetery personnel have removed the headstone from the grave and transported it to the Contractor’s work area, making it available for inscription.

4.0 Authorized Operating Hours: All work for contract performance at the Cemetery shall be performed between the hours of 8:00 a.m. and 4:30 p.m., local time, Monday through Friday, excluding Federal holidays.