S06 - 0006 - Att2 - Addendum 2 - Maxcell 4-cell Innerducts.pdf
PDF 155 KB Posted
- Attached to
- Construct EHRM Infrastructure Upgrades | Lebanon, PA Federal contract opportunity
- Solicitation number
- 36C77625R0055_1
About this file
This document is a product specification sheet for MaxCell Edge fabric innerduct for 2" conduit applications. The product line includes multiple configurations (1-4 cell versions) designed to maximize network infrastructure conduit capacity, with each model capable of accommodating cables up to 0.85" (22mm) in diameter. Key product features include: high melting point of 419°F, halogen-free construction, resistance to ground chemicals and petroleum products, manufactured from PET and Nylon 6, and a patented fabric design that may reduce pulling tension by up to 20%. The product is designed for new construction and occupied conduit applications, potentially allowing installation of up to 300% more cabling per conduit compared to rigid ducts while reducing total system cost. Each cell includes a pre-installed 1250LB Vis™ Glide Rope and is pre-lubricated to reduce friction during installation.
View the file
Other files for this federal contract opportunity
Show all 34
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PRODUCT # MIN CONDUIT ID CELLS REPLACES MAX CABLE DIAMETER PER CELL
MXE5222: 2.00”
MXE52221 2.00” 1 Cell MXC2001 .85” (22mm)
MXE52222 2.00” 2 Cell MXC2002 .85” (22mm)
MXE52223 2.00” 3 Cell MXC2003 .85” (22mm)
MXE52224 2.00” 4 Cell N/A .85” (22mm)
PHONE: 888.387.3828 MAIL: info@maxcell.us WEB: www.maxcell.us
MaxCell® Edge fabric innerduct is designed to maximize the capacity of conduits in network infrastructure while preserving space for future network deployments. New construction applications have yielded installation of up to 300% more cabling per conduit over rigid ducts. In occupied conduits, MaxCell’s design has allowed for easy pathway creation when overriding existing cabling or traditional innerduct while reducing total system cost.
Designed for 2” conduit applications
Solves cabling issues for conduits, allowing a range of cable sizes
Enables overlay of cables in occupied conduits
Reduces or eliminates number of conduits required in new construction
Melting point of 419°F (215°C) (almost twice that of HDPE)
Halogen-free
Resistant to ground chemicals and petroleum products
Constructed of PET (Polyethylene Terephthalate) and Nylon 6
Patented fabric design may reduce pulling tension by up to 20% over previous
MaxCell versions
Features pre-installed 1250LB Vis™ Glide Rope in each cell
Pre-lubed for lower friction during MaxCell and cable installation*
Manufactured in the U.S.A.
MaxCell Edge Standard and Detectable products are available in multiple sizes and configurations. Contact customer service on applications requiring MaxCell ISP (Plenum or Riser ratings). MaxCell ISP is designed as a UL2024 certified compliment to the MaxCell Edge product line.
Use of OFNR or OFNP cable may result in reduced pulling lengths as the cable jacket compositions may result in a higher coefficient of friction over traditional OSP (outside plant) cabling. Designers should make every effort to conform to industry standards (BICSI best practices and ANSI standards) with regard to distances between any two pull points, number of bends and adhere to the cable manufacturer's maximum pulling tension specifications. Do not exceed two 90° bends or a total of 180° in a single pull. Consult a MaxCell representative if unavoidable. Proofing
(mandreling) of conduit pathways is advised prior to MaxCell installation (normally 1/4” to 1/2” less than the diameter of the conduit).
Design and fabrication of MaxCell is patent protected.
* Additional lubrication is recommended to further decrease friction during cable installation.
IMPORTANT INSTALLATION TIPS
Swivels must be used when pulling MaxCell
Contact customer service for installation assistance
View installation video online: www.maxcell.us/installation.aspx
2-00in MXE5222 4-00in MXE8638
3-00in MXE6428
2-00in MXE5222
1-75in MXE4418
1-50in MXE3614
1-25in MXE3212
1-10in MXE2810
Detectable 4-00in MXED8638
Detectable 3-00in MXED6428
Detectable 2-00in MXED5222
Detectable 1-75in MXED4418
Detectable 1-25in MXED3212
4-00in 4-Cell MXE86384
3-00in 4-Cell MXE64284
Facebook 4-00in 4-Cell MXE86384
Facebook 3-00in 3-Cell MXE64283
Verizon 2-00in 2-Cell MXEV6528222
Verizon Business Approved Product List. . 33
Verizon Wireline Approved Product List . . 34
Data Center 4-00in MXE116603
Notes
MAXCELL EDGE 2.00”
231017
EDITABLE
Eddie.C.Willis Cloud
MX 52223BK5300E
MX: Standard prefix to identify the product as a MaxCell item
E: Product Line Code: E-Edge; ED-Edge Detectable
52: Product Width (Millimeters)
22: Maximum Outside Diameter of Cable (Millimeters)
3: Number of Cells
BK: Thread Identification Color (Varies Per Product): BK-Black (Standard)
5300: Standard Length (Feet)†: 5,300 ft; 10,000 ft
How do MaxCell part numbers work?
BASE PRODUCT # # OF CELLS THREAD COLOR LENGTH (FT)
EXAMPLE: MXE5222 3 BK 5300
†1-cell configurations are only available as 5,300ft or 10,000ft lengths. Contact customer service regarding custom lengths for other configurations (available in 5’ increments).
Reel sizes may vary. Contact customer service for MaxCell ISP (Plenum and Riser) part numbers.
PROJECT WORKSHEET Project Name:
PHONE: 888.387.3828 MAIL: info@maxcell.us WEB: www.maxcell.us
4-00in MXE8638
3-00in MXE6428
2-00in MXE5222
1-75in MXE4418
1-50in MXE3614
1-25in MXE3212
1-10in MXE2810
Detectable 4-00in MXED8638
Detectable 3-00in MXED6428
Detectable 2-00in MXED5222
Detectable 1-75in MXED4418
Detectable 1-25in MXED3212
4-00in 4-Cell MXE86384
3-00in 4-Cell MXE64284
Facebook 4-00in 4-Cell MXE86384
Facebook 3-00in 3-Cell MXE64283
Verizon 2-00in 2-Cell MXEV6528222
Verizon Business Approved Product List. . 33
Verizon Wireline Approved Product List . . 34
Data Center 4-00in MXE116603
Notes
2.00” ORDERING GUIDELINE
| MXE 2.00 front MXE5222 |
| MXE 2.00 back MXE5222 |
File details come from the government source that posted it. Updated .