25051529-031 and 036 BOM.rtf

Order, For Internal Use Only

PRINTED 00/00/00 0:00 AM

file_0.png file_1.wmf

Order, For Internal Use Only

PRINTED 05/04/95 2:12 PM

Q2C Number: 25051529 Quote Number: 2 Revision Number: 0

Project Name: VA PHASE 4B Project Sub-Name:

Project Location: DES MOINES, IA

Q2C Number: 25051529 Quote Number: 2 Revision Number: 0 Project Name: VA PHASE 4B Quote Name:

Item No.

Qty.

Catalog Number / Details

031-00

Designation: 36th St.

METAL ENCLOSED SWITCHGEAR

METAL ENCLOSED SWITCHGEAR > 1000 VOLTS

GENERAL PRODUCT INFORMATION

PRODUCT TYPE: HVL

2 SECTION LINE-UP

INDOOR (Type1)

1 - 38.00 MAIN SECTION

1 - 38.00 UTILITY - COLD SEQUENCE METER

OVERALL DIMENSIONS: 76.00" 1930mm WIDE 90.00" 2286mm HIGH 54.50" 1384mm DEEP

APPROXIMATE WEIGHT: 3625 LBS 1648 KG

SWITCHGEAR RATINGS

SWITCHGEAR MAXIMUM VOLTAGE RATING: 15.0 KV

MAIN BUS: 1200A SILVER-PLATED COPPER

GROUND BUS: SILVER-PLATED COPPER

INSULATED BUS: HEAT SHRINK

BIL : 95 KV

NON-FUSED SWITCH RATINGS

MOMENTARY CURRENT: 40 KA ASYM (25 KA SYM)

FAULT CLOSE CURRENT: 40KA ASYM (25KA SYM)

SHORT TIME CURRENT 2 SEC:

25 KA SYM (40 KA ASYM)

SPECIFIC APPLICATION INFORMATION

NOMINAL SYSTEM VOLTAGE: 13200 VOLTS

SYSTEM GROUNDING: 3 WIRE WYE

SOLIDLY GROUNDED

FREQUENCY: 60 HZ

MAX AVAILABLE SHORT CKT CURRENT:

25KA SYM (40 KA ASYM)

FRONT AND REAR ACCESS

AMBIENT AIR TEMP: > -30C, <40 DEG C

STANDARD & OPTIONAL ITEMS COMMON TO LINEUP

EXTERIOR PAINT COLOR:

ANSI 61 LIGHT GREY

INSULATORS : GLASS POLYESTER

AC CONTROL POWER PROVIDED BY:

USER / CUSTOMER

TOUCH UP PAINT PROVIDED

STANDARD ENCLOSURE HARDWARE

APPLIES TO CATEGORY B APPLICATIONS

WHERE THE GENERAL PUBLIC WILL NOT

HAVE ACCESS TO THE SWITCHGEAR

SPACE HEATER INDOOR:

1200W-240VAC (300W-120VAC)

THERMOSTAT FOR HEATER(S)

PADLOCK PROVISIONS FOR UP TO 3

PADLOCKS ON SWITCH HANDLE CASTING

LABEL REQUIREMENTS : UL

STANDARDS: ANSI

DC CONTOL POWER PROVIDED BY SQUARE D

ON A SEPARATE LINE ITEM

CHARGING MOTOR/CLOSE VOLTAGE: 125 VDC

LUGS ARE BURNDY LONG BARREL

COMPRESSION TYPE VACL (AL / CU)

1 - THIS SWITCHGEAR IS CONNECTING TO

EXISTING EQUIPMENT

SPECIAL FEATURES OR TAG ITEMS (PER LINE-UP)

IF SPECIAL FEATURES ARE LISTED BELOW IN THIS

BILL OF MATERIAL, THEY WILL NOT APPEAR ON THE

FRONT ELEV OR ONE-LINE DRAWING AND MAY ALTER

THE FINAL LAYOUT AND DIMENSIONS.

IF UNKNOWN ANSWERS ARE LISTED BELOW

IN THIS BILL OF MATERIAL : DEFAULT

ASSUMPTIONS WERE MADE.

THESE ASSUMPTIONS MAY ALTER THE FINAL

PRICE, FINAL LAYOUT AND DIMENSIONS.

CAUTION: CONNECTION TO EXISTING

EQUIPMENT HAS BEEN SELECTED.

NO PRICING OR DRAWINGS FOR THIS CONNECTION

WILL BE INCLUDED IN THIS QUOTATION.

FIELD SERVICE

SHOULD TAKE ALL NECESSARY MEASUREMENTS FOR

CORRECT CONNECTION AND ALIGNMENT

PRICE WILL DEPEND ON THE RESULTS FROM

FIELD SERVICE

02 - Special Paint Creme per email

THIS HVL METAL-ENCLOSED SWITCHGEAR SHALL BE

DEPICTED IN THE ATTACHED DRAWINGS AND

SHALL INCLUDE THE FOLLOWING:

SECTION # 1, MAIN -

Disconnect

1 - 15KV, 600A, 25KA HVL SWITCH Type1

MULTIPLE

600A CONTINUOUS & INTERRUPTING CURRENT

1 - MOTOR OPERATOR FOR HVL OTM MECHANISM

600/1200A

1 - HINGED REAR DOOR

1 - VERTICAL LINE/LOAD BARRIER WITH

PORCELAIN PASS THRUS

1 - REAR CONNECTOR ASSEMBLY

1 - GROUND BAILS WITH GROUND STUDS, 3 PHASE

SET

1 - MIMIC BUS PAINTED DEVICE SYMBOLS

1 - SWITCH POSTION AUXILIARY CONTACTS 2NO-2NC

1 - KEY INTERLOCK SWITCH TO SECONDARY MAIN

BREAKER

1 - 3 PHASE SET OF 500 KCMIL AL/CU

COMPRESSION LUGS PER PHASE

LINESIDE (UL LISTED)

- LINESIDE, BOTTOM CABLE ENTRY

3 - 15 KV (12.7 MCOV) STATION CLASS SURGE

ARRESTERS ON LINESIDE

SECTION # 2, UTILITY - COLD SEQUENCE METER

Utility

1 - 15 KV Type1 UTILITY METERING SECTION

1 - PROVISIONS FOR BAR TYPE CTS

1 - MIMIC BUS PAINTED DEVICE SYMBOLS

01- Connection To MasterCclad 01- Install Utility Provided VTs & CTs

036-00

Designation: Douglas Ave.

METAL ENCLOSED SWITCHGEAR

METAL ENCLOSED SWITCHGEAR > 1000 VOLTS

GENERAL PRODUCT INFORMATION

PRODUCT TYPE: HVL

2 SECTION LINE-UP

INDOOR (Type1)

2 - 38.00 FEEDER SECTIONS

OVERALL DIMENSIONS: 76.00" 1930mm WIDE 90.00" 2286mm HIGH 72.50" 1842mm DEEP

APPROXIMATE WEIGHT: 3020 LBS 1373 KG

SWITCHGEAR RATINGS

SWITCHGEAR MAXIMUM VOLTAGE RATING: 15.0 KV

MAIN BUS: 1200A SILVER-PLATED COPPER

GROUND BUS: SILVER-PLATED COPPER

INSULATED BUS: HEAT SHRINK

BIL : 95 KV

NON-FUSED SWITCH RATINGS

MOMENTARY CURRENT: 40 KA ASYM (25 KA SYM)

FAULT CLOSE CURRENT: 40KA ASYM (25KA SYM)

SHORT TIME CURRENT 2 SEC:

25 KA SYM (40 KA ASYM)

SPECIFIC APPLICATION INFORMATION

NOMINAL SYSTEM VOLTAGE: 13200 VOLTS

SYSTEM GROUNDING: 3 WIRE WYE

SOLIDLY GROUNDED

FREQUENCY: 60 HZ

MAX AVAILABLE SHORT CKT CURRENT:

25KA SYM (40 KA ASYM)

FRONT AND REAR ACCESS

AMBIENT AIR TEMP: > -30C, <40 DEG C

STANDARD & OPTIONAL ITEMS COMMON TO LINEUP

EXTERIOR PAINT COLOR:

ANSI 61 LIGHT GREY

INSULATORS : GLASS POLYESTER

AC CONTROL POWER PROVIDED BY:

USER / CUSTOMER

STANDARD ENCLOSURE HARDWARE

APPLIES TO CATEGORY B APPLICATIONS

WHERE THE GENERAL PUBLIC WILL NOT

HAVE ACCESS TO THE SWITCHGEAR

SPACE HEATER INDOOR:

1200W-240VAC (300W-120VAC)

THERMOSTAT FOR HEATER(S)

PADLOCK PROVISIONS FOR UP TO 3

PADLOCKS ON SWITCH HANDLE CASTING

LABEL REQUIREMENTS : UL

STANDARDS: ANSI

DC CONTOL POWER PROVIDED BY SQUARE D

ON A SEPARATE LINE ITEM

CHARGING MOTOR/CLOSE VOLTAGE: 125 VDC

LUGS ARE BURNDY LONG BARREL

COMPRESSION TYPE VACL (AL / CU)

SPECIAL FEATURES OR TAG ITEMS (PER LINE-UP)

IF SPECIAL FEATURES ARE LISTED BELOW IN THIS

BILL OF MATERIAL, THEY WILL NOT APPEAR ON THE

FRONT ELEV OR ONE-LINE DRAWING AND MAY ALTER

THE FINAL LAYOUT AND DIMENSIONS.

IF UNKNOWN ANSWERS ARE LISTED BELOW

IN THIS BILL OF MATERIAL : DEFAULT

ASSUMPTIONS WERE MADE.

THESE ASSUMPTIONS MAY ALTER THE FINAL

PRICE, FINAL LAYOUT AND DIMENSIONS.

02 - Special Creme Paint per email

THIS HVL METAL-ENCLOSED SWITCHGEAR SHALL BE

DEPICTED IN THE ATTACHED DRAWINGS AND

SHALL INCLUDE THE FOLLOWING:

SECTION # 1, FEEDER -

Disconnect

1 - 15KV, 600A, 25KA HVL SWITCH Type1

MULTIPLE

600A CONTINUOUS & INTERRUPTING CURRENT

1 - MOTOR OPERATOR FOR HVL OTM MECHANISM

600/1200A

1 - HINGED REAR DOOR

1 - VERTICAL LINE/LOAD BARRIER WITH

PORCELAIN PASS THRUS

1 - Type1 BUS TRANSITION SECTION TO

MASTERCLAD SWITCHGEAR ON THE LEFT

1 - GROUND BAILS WITH GROUND STUDS, 3 PHASE

SET

1 - MIMIC BUS PAINTED DEVICE SYMBOLS

1 - SWITCH POSTION AUXILIARY CONTACTS 2NO-2NC

1 - KEY INTERLOCK SWITCH TO SECONDARY MAIN

BREAKER

1 - 3 PHASE SET OF #2 AWG AL/CU

COMPRESSION LUGS PER PHASE

LOADSIDE (UL LISTED)

- LOADSIDE, BOTTOM CABLE EXIT

3 - 15 KV (12.7 MCOV) DISTRIBUTION CLASS

SURGE ARRESTERS ON LINESIDE

SECTION # 2, FEEDER -

Disconnect

1 - 15KV, 600A, 25KA HVL SWITCH Type1

MULTIPLE

600A CONTINUOUS & INTERRUPTING CURRENT

1 - MOTOR OPERATOR FOR HVL OTM MECHANISM

600/1200A

1 - HINGED REAR DOOR

1 - VERTICAL LINE/LOAD BARRIER WITH

PORCELAIN PASS THRUS

1 - REAR CONNECTOR ASSEMBLY

1 - GROUND BAILS WITH GROUND STUDS, 3 PHASE

SET

1 - MIMIC BUS PAINTED DEVICE SYMBOLS

1 - SWITCH POSTION AUXILIARY CONTACTS 2NO-2NC

1 - KEY INTERLOCK SWITCH TO SECONDARY MAIN

BREAKER

1 - 3 PHASE SET OF #2 AWG AL/CU

COMPRESSION LUGS PER PHASE

LOADSIDE (UL LISTED)

- LOADSIDE, BOTTOM CABLE EXIT

3 - 15 KV (12.7 MCOV) DISTRIBUTION CLASS

SURGE ARRESTERS ON LINESIDE