S02 - MV LIGHTING CONTROLS_1.pdf

TYPE lit

CATALOG # LIB24 115/277-19HDR-1,

VA PAH

LI Native BACnet Level Ipteriur (LI 8, LIB24, LIB4U)

Native level integration .

between lighting control .

panel and BAS via BACnet

Configure and control LI panel with any BACnet workstation

No proprietary configuration tools or software needed for commissioning

BACriet is a registered trademark of ASHFME

Industry standard ******* MS/TP communication

• • override time delays handled by

LI panel automatically

*Integral blink warnings and

Product Overview

Description

The Lighting Integrator Native BACnet panel (LIB) enables native level integration of lighting control between the LIB panel and any building automa-tion system that supports the ANSI/ASHRAE BACnet communication protocol. The LIB allows the BAS to schedule, monitor status, and override lighting freely without the need to support light-ing-specific functions (e.g., blink warning, local override switches, and delay timers).

Lighting Control Specific Functions

The LIB panel provides integral automation capa-bilities that enable lighting control compliant with state energy codes based on ASHRAE 90.1 and IECC. Its distributed processing also ensures operation of primary lighting control functions, such as wall switch overrides, blink warnings, and afterhours time out of overrides.

Applications

Operation

With the LIB panel system, panel relays and chan-nels are automatically exposed to the BAS as standard BACnet objects. Relays can be individu-ally commanded and monitored for their actualon/ off status, or be combined into channels and com-manded and monitored as a group. This permits a building to be conveniently divided into lighting control zones,greatly reducing the number of indi-vidual objects a BAS must administer. LIB panels perform all typical lighting control sequence of operations without continuous supervision by the

BAS.

In most applications, a BAS will set lighting zones to occupied/unoccupied status through a schedule or a workstation command. The LIB panel then coordinates local switch overrides, time delays and blink warnings based on this status.

Features • Integral automation enables BAS to easily provide code compliant lighting control

• Distributed processing ensures operation of primary lighting control functions

• Compatible with WattStopper occupancy sensors 2nd standard low voltage switch

• Supports Auto On, or energy saving Manual On function for lighting in areas scheduled as occu-pied

• Supports AS-100 Automatic Control Switch sweep off function

• Qualifies for use in ARRA-funded projects

WattStopper www.wattstopper.com 8 0 0 . 8 7 9 . 8 5 8 6

PI r I-a

I-

-i I-a a • .4 I.. a u

_`_,,-1 option card BACnet a I.

Lighting Integrator Panel Lighting integrator Panel

MS/TP network

AOrwpk.nd I Elksnrai www.wattstopper.com 1 8 0 0 . 8 7 9 . 8 5 8 5

) Specifications • MS/TP communications port with removable 120 ohm "end of line" termination jumper

• 9600/19200/38400/76800 baud rates, selectable

• MS/TP MAC address selectable, 0 - 127

• Device ID selectable, 0 - 999 or 86000 - 86999

• Compatible with direct wired low voltage switches for relay override; not compatible with HDLS series dataline switches

• Description property writable for all objects

• One year warranty

BACnet Objects

Supported

Native BACnet Card and System

Layout

• Binary Output, Instance range 01-48 (1per relay), monitor and control relays ON (1), OFF (NULL)

• Binary Value, Instance range 01-08 (1 per channel), command channels to occupied (1) or unoc-cupied (0) status

• Multi State Value, Instance range 01-08 (1 per channel), read channel relays' status as ALL ON, ALL OFF, BLINK, or MIXED state

• Binary Value, Instance range 101-108(1 per channel), sets channel relays to manual-ON (1) or auto-ON (0)

• Analog Value, Instance range 101-108 (1 per channel), sets blink warning time for channel relays as five minutes (5) or no blink (0), or AS-100 switch (250)

• Analog Value, Instance range 201-208 (1 per channel), sets time delay for each channel relay

(1-240 minutes) or no time delay (0)

• Analog Value, Instance range 01-48 (one per relay), sets relay to follow channel A-H (1-8)

LIB Panel Network

BACnet workstation

BAS ,11W'

General LI Description

Operation (coned.)

Information WattStopper'sLighting Integrator (LI) is a low voltage, relay based lighting control panel. The LI interior is shipped as a separate assembly from the panel enclosure and cover to facilitate project rough-in requirements. Interiors are configured as 8, 24 or 48 relay capacity with the quantity of relays installed as called for on the order. The interior field mounts into an appropriate enclosure supplied separately.

Inputs can be wired to accommodate momentary three wire, momentary two wire (toggle) or maintained contact switches as well as occupancy sensors. The switch input circuits are auto sensing and will automatically configure appropriately when Watt Stopper occupancy sensors are connected.

Group Switching

Operation

LI relays are driven into a latched on or off state via a 24 volt DC pulse generated by the relay driver cards. A momentary pushbutton is provided for each relay driver circuit to manually force the relay to toggle its state with each button press.

An isolated set of contacts in the relays provides a positive status feedback to the relay driver circuits that are annunciated by an LED associated with each relay. Removable terminal blocks allow connection of direct wired low voltage devices for remote control of relays.

• Interior provides complete isolation between line and low voltage when used with a compatible LENC series enclosure

• Individual plug-in, latching style single pole relays with isolated pilot/status contacts

• Integral push button override, status LED, and pilot light output per relay

• Two slots available for optional automation, networking and integration control cards

Group switching provides the unique WattStopper Smartwired switching function. This simple button press interface allows any quantity of relays to be assigned quickly to each group switching channel for common on/off control or for pattern (scene) style control. Each of the eight channels is provided with an override pushbutton, LED status indicator and terminals for connection of wall switches and occupancy sensors. Eight and 24 size panels can be ordered with one group switch card (8 channels), 48 size panels can have two group switch cards for a total of 16 channels (8 controllable by scheduling, eight by switching only).

• Supports WattStopper occupancy sensor heads without need for separate sensor power packs

• Smartwire feature allows grouping of relays for common control

• DIN rail mounting provided within the Class 2 section for mounting of optional accessories

• Control multi-pole circuits with optional contactors and compatible LENC enclosure

• Optional configuration available for use on emergency lighting circuits

( C2)

WattStopper

8 0 0 . 8 7 9 . 8 5 8 5

24 relay interior capacity

14'

35.56 cm

48 relay Interior capacity

14"

35.56 cm

8 relay Interior capacity

13°

33.02 cm

Panel Interior Dimensions

10.5°

26.67 cm

23.37"

59.37 cm

35.75°

90.80 cm

General LI Specifications

• Interior capacity:

- 8 circuits, up to 8 SPST relays

- 24 circuits, up to 24 SPST relays

- 48 circuits, up to 48 SPST relays

• Input voltage options, 120/277V 60 Hz, 120/347V 60 Hz, 240V50 Hz

• Group switching, eight channels per installed group switching card. One card max per LI8 and LI24. Two cards max LI48.

• Low voltage switch inputs, removable terminal blocks with screw-less connection, configurable for three wire momentary, two wire momentary (toggle), and two wire maintained dry contact switches or WattStopper occupancy sensors.

• Accessory power available

- LI8: 1000 MA fa24VAC or 800 MA (a 24VDC

- LI24 and LI48: 1400 MA (a 24VAC or 800 MA (a

24VDC

• SCCR (short circuit current rating) 14,000 amps with HDR Heavy Duty Relay

• HDR relays:

- Coil voltage, 24 VDC, pulse ON and pulse OFF

- Mechanically Latched contacts

- 1/2" K,O, mounting, LV plug-connection, individually replaceable

- Contact ratings

30 amps ballast (a 277V

20 amps ballast ra 347V

20 amps tungsten fa 120V

30 amps resistive fa 347V

1.5 HP Cd 120V

- Endurance: 300,000 mechanical cycles

• Pilot light output, 24 V rectified or 24VAC, other voltages configurable with external power supply

• One year warranty

Ordering Information

05)

Pub. No. 19506 rev. 08/2009

Interior Capacity Installed Options Voltage Options Relay Count Group Switch Card Emergency Relays Coil Voltage

III LI88 0 115/277 19 HDR relays installed )max of interior capacity)

1 GS cards (max 1 in 8, 24, 2 in 48) ili 115

. LIB24 I 115/347 0 240

IIII LIB48 II 240 I 277

I 347 A Om* 10Ies et www.wattstopper.com I 8 0 0 . 8 7 9 . 8 5 8 5

16-gauge all steel tubs with galvineal finish

Screw on, powder coated cover permits temporary hanging via key hole screw slots

Surface or flush mounting with back mounting holes, screw cover

Do e

12"

DIN Rail Mounting Options

DMP1

DMP1EM

14" 4.375"

DMP3EM _L

4'

I/

22"

18"

DMP2

3.5"

_L 4.376"

0 0

14"

—r

21"

14'

TYPE 11-1.

CATALOG # LENC:

VA PAH

Lhhtiflg Intr: rator P Encloawas

- I

Lig))

Lockable door access to Class 2 panel section, meets NFPA 70

Studs provided for quick installation of panel interior section

UL and CUL listed;

one year warranty

Product Overview

WattStopper www.wattstopper.com 8 0 . 8 7 9 . 8 5 8 5

Description

Lighting Integrator panel enclosures are designed specifically to work with all configurations of LI panel interiors containing 8 to 48 relays. The enclosures are provided with integral mounting studs that are configured to accept the panel interior making the installation quick and easy.

Covers are secured to the tubs with screws and have keyhole style mounting. This allows the cover to be temporarily hung on the tub during the construction phase of the project. All covers have hinged doors that expose only the low voltage (Class 2) section of the panel and are equipped with key locks and two keys each. All Lighting Integrator enclosures are NEMA 1 rated. Consult factory for other NEMA rated applications.

Configurations

Enclosures rated for 24 or 48 relay capacity have space provided at the bottom for optional mounting plates (DMP) to accept DIN rail mounted accessories such as multi-pole contactors and ELCU-100 Emergency Lighting Control Units.

Standard LENC24 and LENC48 enclosures will accommodate up to six four pole contactors (requires DMP mounting plate) or four ELCU- 100 units (requires DMP-1EM mounting plate).

LENC8-24 and LENC24-48 enclosures have additional space provided and will accommodate up to twelve four pole contactors (requires DMP-2 mounting plate) or 12 ELCU-100 units (requires DMP-3EM mounting plate).

LENC8S

LENC8F

16.5'

Tub Dimensions

15.08" Low voltage section 13.58"

LENC24S

LENC24F

23.88'

14.5' Note:

Tub depth 4.50" Cover thickness .075"

23.38" 31.38 Low voltage section uo rp as a th

M O

A a n

15.0'

31.38"

26°

16'

LENC8-24S

LENC8-24F

23.88'

Low voltage section

Overall Dimensions Overall Weight Including Cover (HxWxD)

Catalog No. Description

Qualifies for use in ARRA-funded projects. A enar, Itaaal I D lostra,X www.wattstopper.com I 8 0 0 . 8 7 9 . 8 5 8 5

4.94-

14.0' 4.94=

23 3r

2051w

Low voltage section

43 88'

40.5' a 6'

LENC48S

LENC48F

23.88" 14.0' 4.94"

43 8"

40.5

Low voltage section o• if-

35.8'

8.08'

16°

LENC24-48S

LENC24-48F

23.88'

. LENC8S 8 relay capacity, surface mount 15.75" x 16.62" x 4.575" 18 lbs

III LENC8F 8 relay capacity, flush mount 17.10" x 18.48" x 4.575" 20 lbs

0 LENC8-24S 8 relay capacity with 24 size tub, surface mount 32.00" x 24.00" x 4.575" 45 lbs

D LENC8-24F 8 relay capacity with 24 size tub, flush mount 33.35" x 25.85" x 4.575" 50 lbs

• LENC24S 24 relay capacity, surface mount 32.00" x 24.00" x 4.575" 45 lbs •

• LENC24F 24 relay capacity, flush mount 33.35" x 25,85" x 4.575" 50 lbs

• LENC24-48S 24 relay capacity with 48 size tub, surface mount 44.50" x 24.00" x 4.575" 62 lbs

0 LENC24-48F 24 relay capacity with 48 size tub, flush mount 45.85" x 25.85" x 4.575" 66 lbs

0 LENC48S 48 relay capacity, surface mount 44.50" x24.00" x 4.575" 62 lbs

D LENC48F 48 relay capacity, flush mount 45.85" x 25.85" x 4.575" 66 lbs

• DMP mounting plate, one DIN rail for up to 6 contactors 8" x 12" x 4.625" 1.86 lbs

0 DMP-2 mounting plate, two DIN rail for up to 12 contactors 21"x 14" x 4.625" 5.30 tbs.

0 DMP-1EM mounting plate, one DIN rail with barrier for up to 4

ELCU-100s

10" x 14" x 4.37" 3.64 lbs.

0 DMP-3EM mounting plate, three DIN rail with barrier for up to

12 ELCU-100s

22" x 14" x 4.37" 7.60 lbs.

Ordering Information

Pub, No. 10808 rev. 11/2011

4.94-

8.0"

4.82 -0*---11.68",--.-

.2

Product Overview

Features

TYPE 2H,

CATALOG # LIB24 115/277-19HDR-1

VA PAH

LI t'Lifc.. net Levet IntLviul (LUO, LI 4., LILJ4.L)

Native level integration . • between lighting control panel and BAS via BACnet

Configure and control LI panel with any BACnet workstation

Industry standard ******* MS/TP communication

. 'Integral blink warnings and

. • • override time delays handled by LI panel automatically

No proprietary configuration tools or software needed for commissioning

BACnet tea registered trademark at ASHRAE

Description

The Lighting Integrator Native BACnet panel (LIB) enables native level integration of lighting control between the LIB panel and any building automa-tion system that supports the ANSI/ASHRAE BACnet communication protocol. The LIB allows the BAS to schedule, monitor status, and override lighting freely without the need to support light-ing-specific functions (e.g., blink warning, local override switches, and delay timers).

Operation

With the LIB panel system, panel relays and chan-nels are automatically exposed to the BAS as standard BACnet objects. Relays can be individu-ally commanded and monitored for their actualon/ off status, or be combined into channels and com-manded and monitored as a group. This permits a building to be conveniently divided into lighting control zones, greatly reducing the number of indi-vidual objects a BAS must administer. LIB panels perform all typical lighting control sequence of operations without continuous supervision by the

BAS.

• Integral automation enables BAS to easily provide code compliant lighting control

• Distributed processing ensures operation of primary lighting control functions

• Compatible with WattStopper occupancy sensors 2nd standard tow voltage switch

Lighting Control Specific Functions

The LIB panel provides integral automation capa-bilities that enable lighting control compliant with state energy codes based on ASHRAE 90.1 and IECC. Its distributed processing also ensures operation of primary lighting control functions, such as wall switch overrides, blink warnings, and afterhours time out of overrides.

Applications

In most applications, a BAS will set lighting zones to occupied/unoccupied status through a schedule or a workstation command. The LIB panel then coordinates local switch overrides, time delays and blink warnings based on this status.

• Supports Auto On, or energy saving Manual On function for lighting in areas scheduled as occu-pied

• Supports AS-100 Automatic Control Switch sweep off function

• Qualifies for use in ARRA-funded projects

WattStopper'

8 0 0 . 8 7 9 . 8 5 8 5

) Specifications • MS/TP communications port with removable 120 ohm "end of line" termination jumper

• 9600/19200/38400/76800 baud rates, selectable

• MS/TP MAC address selectable, 0 - 127

• Device ID selectable, 0 - 999 or 86000 - 86999

• Compatible with direct wired low voltage switches for relay override; not compatible with HDLS series dataline switches

• Description property writable for all objects

• One year warranty

BACnet Objects

Supported

Native BACnet Card and System

Layout

• Binary Output, Instance range 01-48 (lper relay), monitor and control relays ON (1), OFF (NULL)

• Binary Value, Instance range 01-08 (1 per channel), command channels to occupied (1) or unoc-cupied (0) status

• Multi State Value, Instance range 01-08 (1 per channel), read channel relays' status as ALL ON, ALL OFF, BLINK, or MIXED state

• Binary Value, Instance range 101-108(1 per channel), sets channel relays to manual-ON (1) or auto-ON (0)

• Analog Value, Instance range 101 -1 08 (1 per channel), sets blink warning time for channel relays as five minutes (5) or no blink (0), or AS-100 switch (250)

• Analog Value, Instance range 201-208 (1 per channel), sets time delay for each channel relay

(1-240 minutes) or no time delay (0)

• Analog Value, Instance range 01-48 (one per relay), sets relay to follow channel A-H (1-8)

LIB Panel. Network

BACnet workstation

• t-

BACnet i.. r i-

A A

. 1

BAS

Panel

Light ng Integrator Panel Lighting Integrator

MS/TP network

AOmplond la lesrend www.wattstopper.com IS 0 0 . 8 7 9 .8 5 8 5

General LI Description

Operation (cont'd.)

Information WattStopper'sLighting Integrator (LI) is a low voltage, relay based lighting control panel. The LI interior is shipped as a separate assembly from the panel enclosure and cover to facilitate project rough-in requirements. Interiors are configured as 8, 24 or 48 relay capacity with the quantity of relays installed as called for on the order. The interior field mounts into an appropriate enclosure supplied separately.

Inputs can be wired to accommodate momentary three wire, momentary two wire (toggle) or maintained contact switches as well as occupancy sensors. The switch input circuits are auto sensing and will automatically configure appropriately when Watt Stopper occupancy sensors are connected.

Group Switching

Operation

LI relays are driven into a latched on or off state via a 24 volt DC pulse generated by the relay driver cards. A momentary pushbutton is provided for each relay driver circuit to manually force the relay to toggle its state with each button press.

An isolated set of contacts in the relays provides a positive status feedback to the relay driver circuits that are annunciated by an LED associated with each relay. Removable terminal blocks allow connection of direct wired low voltage devices for remote control of relays.

• Interior provides complete isolation between line and low voltage when used with a compatible LENC series enclosure

• Individual plug-in, latching style single pole relays with isolated pilot/status contacts

• Integral push button override, status LED, and pilot tight output per relay

• Two slots available for optional automation, networking and integration control cards

Group switching provides the unique WattStopper Smartwired switching function. This simple button press interface allows any quantity of relays to be assigned quickly to each group switching channel for common on/off control or for pattern (scene) style control. Each of the eight channels is provided with an override pushbutton, LED status indicator and terminals for connection of wall switches and occupancy sensors. Eight and 24 size panels can be ordered with one group switch card (8 channels), 48 size panels can have two group switch cards for a total of 16 channels (8 controllable by scheduling, eight by switching only).

• Supports WattStopper occupancy sensor heads without need for separate sensor power packs

• Smartwire feature allows grouping of relays for common control

• DIN rail mounting provided within the Class 2 section for mounting of optional accessories

• Control multi-pole circuits with optional contactors and compatible LENC enclosure

• Optional configuration available for use on emergency lighting circuits

WattStopper

0 0 . 8 7 9 . 8 5 8 5

35.75'

90.80 cm

23.37'

59.37 cm

General LI Specifications

• Interior capacity:

- 8 circuits, up to 8 SPST relays

- 24 circuits, up to 24 SPST relays

- 48 circuits, up to 48 SPST relays

• Input voltage options, 120/277V 60 Hz, 120/347V 60 Hz, 240V 50 Hz

• Group switching, eight channels per installed group switching card. One card max per LI8 and LI24. Two cards max LI48.

• Low voltage switch inputs, removable terminal blocks with screw-less connection, configurable for three wire momentary, two wire momentary (toggle), and two wire maintained dry contact switches or WattStopper occupancy sensors.

• Accessory power available

- LI8: 1000 MA (24VAC or 800 MA 0 24VDC

- LI24 and LI48: 1400 MA ra 24VAC or 800 MA Ira

24VDC

• SCCR (short circuit current rating) 14,000 amps with HDR Heavy Duty Relay

• HDR relays:

- Coil voltage, 24 VDC, pulse ON and pulse OFF

- Mechanically latched contacts

- 1/2" K,O, mounting, LV plug-connection, individually replaceable

- Contact ratings 30 amps ballast ra 277V 20 amps ballast la 347V 20 amps tungsten Id 120V 30 amps resistive fa 347V

1.5 HP 0 120V

- Endurance: 300,000 mechanical cycles

• Pilot light output, 24 V rectified or 24VAC, other voltages configurable with external power supply

• One year warranty

Panel Interior Dimensions

8 relay Interior capacity

13' 1 33.02 cm

24 relay interior capacity

14"

35.66 cm

48 relay interior capacity

14" •

35.56 cm

Ordering Information

Pub. No. 19506 rev. 08/2009

Interior Capacity

Installed Options

Voltage Options Relay Count Group Switch Card Emergency Relays Coil Voltage

II L188 0 115/277 19 NCR relays installed (max of interior capacity)

1 GS cards (max

1 in 8.24, 2 in 481

II 115

I L1824 M 115/347 ii 240

II LI848 • 240 0 277

I 347

A 6ravi br*.1 teSzargi www.wattstopper.com 18 0 0 . 8 7 9 . 8 5 8 5

16-gauge all steel tubs with galvineal finish

S.

S.

Screw on, powder coated cover permits temporary hanging via key hole screw slots

Surface or flush mounting with back mounting holes, screw cover iisson•-• —

00 •

0 0

2"

14'

WattStopper° www.wattstopper.com

800. 8 7 9 . 8 5 86

3.5' irm 6.5" 2.5"

4,375"

DMP2

4.375" I--- 14 •-•-=11•.-

DMP3EM _L

4"

22" 18" 0 0

14"

DMP1EM

10"

TYPE 2111

CATALOG # LENC2

VA PAH

L" tin Intirrator Pane!, ralcIttures

Lockable door access to Class 2 panel section, meets NFPA 70

Studs provided for quick installation of panel interior section

UL and CUL listed;

one year warranty

Product Overview

Description

Lighting Integrator panel enclosures are designed specifically to work with all configurations of LI panel interiors containing 8 to 48 relays. The enclosures are provided with integral mounting studs that are configured to accept the panel interior making the installation quick and easy.

Covers are secured to the tubs with screws and have keyhole style mounting. This allows the cover to be temporarily hung on the tub during the construction phase of the project. All covers have hinged doors that expose only the low voltage (Class 2) section of the panel and are equipped with key locks and two keys each. All Lighting Integrator enclosures are NEMA 1 rated. Consult factory for other NEMA rated applications.

Configurations

Enclosures rated for 24 or 48 relay capacity have space provided at the bottom for optional mounting plates (DMP) to accept DIN rail mounted accessories such as multi-pole contactors and ELCU-100 Emergency Lighting Control Units.

Standard LENC24 and LENC48 enclosures will accommodate up to six four pole contactors (requires DMP mounting plate) or four ELCU- 100 units (requires DM P-1EM mounting plate).

LENC8-24 and LENC24-48 enclosures have additional space provided and will accommodate up to twelve four pole contactors (requires DMP-2 mounting plate) or 12 ELCU-100 units (requires DMP-3EM mounting plate).

DIN Rail Mounting Options

DMP1

-4.94" 4 94,-

13.58'

23.38"

Low voltage section

14.5'

LENC24S

LENC24F

23.88' 14.0'

Low voltage section

Note:

Tub depth 4.50" Cover thickness .075"

31.38"

C.

cv

$.1g

15,0'

31.38'

Low voltage section

15.08"

LENC8S

LENC8F

16.5'

- 4.82'

8.0"

16"

LENC8-24S

LENC8-24F

23.88"

26'

43 88'

40.5" la ' 35.8'

Low voltage section

16"

LENC24-48S

LENC24-48F

23.88" 14.0'

8.8"

-4.94

Low voltage section 2337'

4388'

40.5"

CO

LENC48S

LENC48F

23.88" 14.0' .

• a

20.51'

16.38'

Pub, No. 10808 rev. 11/2011

16 16"

Catalog No. Description Overall Dimensions Overall Weight Including Cover 11-IxWx13)

0 LENC8S 8 relay capacity, surface mount 15.75" x 16.62" x 4.575" 18 lbs

0 LENC8F 8 relay capacity, flush mount 17.10" x 18.48" x 4,575" 20 lbs ll LENC8-24S 8 relay capacity with 24 size tub, surface mount 32,00" x 24.00" x 4.575" 45 lbs

0 LENC8-24F 8 relay capacity with 24 size tub, Rush mount 33.35" x 25.85" x 4.575" 50 tbs

E LENC24S 24 relay capacity, surface mount 32.00" x 24.00" x 4.575" 45 lbs ii LENC24F 24 relay capacity, flush mount 33.35" x 25.85" x 4.575" 50 lbs

0 LENC24-48S 24 relay capacity with 48 size tub, surface mount 44.50" x 24.00" x 4.575" 62 lbs

. LENC24-48F 24 relay capacity with 48 size tub, flush mount 45.85" x 25.85" x 4.575" 66 lbs

III LENC48S 48 relay capacity, surface mount 44.50" x 24.00" x 4.575" 62 lbs

I LENC48F 48 relay capacity, flush mount 45.85" x 25.85" x 4.575" 66 lbs

El DMP mounting plate, one DIN rail for up to 6 contactors 8" x 12" x 4.625" 1.86 lbs . DMP-2 mounting plate, two DIN rail for up to 12 contactors 21"x 14" x 4,625" 5.30 tbs.

EI OMP-1EM mounting plate, one DIN rail with barrier for up to 4

ELCU-100s

10" x 14" x 4.37" 3.64 tbs.

I DMP-3EM mounting plate, three DIN rail with barrier for up to

12 ELCU-100s

22"x 14" x 4.37" 7.60 lbs.

Qualifies for use in ARRA-funded projects.

www.wattstopper.com I 8 0 0 . 8 7 9 • 8 5 8 5

Tub Dimensions

Ordering Information