657A4-24-105-Drawings-Counter Top Case Work Manufactured Wood Casework.pdf
PDF 2 MB Posted
- Solicitation number
- 36C25525R0013
About this file
This is a set of detailed shop drawings and specifications from S&W Cabinets Inc. for casework and countertops to be installed at the John J. Pershing VAMC Clinical & Urgent Care Addition.
The drawings specify plastic laminate cabinets with 25" solid surface countertops, hardware requirements including IH hinges, 22" full extension drawer slides (100lb capacity), 4" wire pulls, and 2 3/8" black plastic grommets. Detailed terms and conditions require measurements by the General Contractor if S&W is not installing, 6-8 weeks delivery after contract signing and approvals, upcharges for more than 3 laminate colors, and specific environmental conditions (60°F minimum temperature, 25-55% humidity). The drawings include floor plans, elevations and detailed cross-sections for multiple areas including medication rooms, nurse stations, reception, and soiled utility rooms. Material samples shown include Corian solid surface in Sandstone for countertops and Formica laminate #7012-58 Amber Maple with matte finish for cabinets.
View the file
Other files
Show all 17
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
&S WCabinets, Inc.
Commercial Casework Division
Ph: (573) 887-3100 Fax: (573) 887-4200
John J. Pershing VAMC Clinical & Urgent Care Addition
Terms & Conditions:
Measurements are the responsibility of the General Contractor if S&W Cabinets, Inc. is not installing the Project.
Please allow 6-8 weeks for delivery of Phase 1 after all information is obtained by S&W Cabinets, Inc. including: signed contract, color schedule, jobsite measurements, and approved shop drawings are returned.
There will be an up charge if more than (3) three plastic laminate colors are selected unless specified in the bid documents.
Delivery will not be made until jobsite conditions are suitable. Maintain ambient temperature above 60 degrees F. during and after delivery of products to Project Site. Maintain ambient relative humidity between 25 and 55 percent 48 hours prior to, during and after delivery of products to Project Site.
If the project is not in production within a year of the signed contract S&W Cabinets, Inc, reserves the right to update the proposed price according to material and labor fluctuations.
All Patterns/Grain Directions defined as vertical on all doors & panels and horizontal on all sink & drawer fronts unless noted otherwise in these drawings.
Drawing Index:
Sheet Number Description
REQUESTS FOR INFORMATION
PLEASE PROVIDE SIZE INFORMATION FOR ALL OWNER PROVIDED
APPLIANCES AND EQUIPMENT, G.C. VERIFY
Cover Sheet
1-4 Floor Plans & Elevations
5-6 Sections
VUC595
Section Details
Shops Reviewed By:__________________________ (Project Manager Signature)
Revised: 3/27/2019
Evrard-Strang Construction 1703 East Deyoung Street
Marion, IL 63740 Phone: 618-997-8997
Fax: 618-997-9978
Dillie Traxel Architecture 4061 Hwy. PP, Suite 2
Poplar Bluff, MO. 63901
COLOR SCHEDULE
SS-1 Please Select Color for Countertops ST-1 Please Select Finish for Countertops
INTERIOR CABINET COLOR White
Hardware Approval:____________(Architect Initials)
HINGES IH Hinge
DRAWER HARDWARE Side Mount 22" Drawer Slides BMHA A156.9, 303FU22 100LB Full Extension
PULLS 4" Wire Pull
GROMMETS 2 3/8" Black Plastic Moulded Grommet With Slotted Cap
HARDWARE
PL-1 Please Select Color for Cabinets and Wall Panels
Hardware Sheet
PL-2 Please Select Color for Wall Cap
S&W Cabinets Inc.
Date: 7/18/2018
Hardware Drawing Number:
Revised: 1/18/2019
Drawn By: RLScale: 3/8" = 1' Approved By: KW
Drawer Slide
Heavy Duty 100 lbs. Full Extension Series No. 303FU
DETAILS
Load Rating 100 lbs.
Extension Full Extension Finish Zinc Height 45 mm, 2" Overall Length 10" (254 mm), 12" (305 mm), 350 mm, 16" (406 mm), 18" (457 mm), 20" (508 mm), 22" (559 mm), 24" (610 mm), 26" (660 mm), 28" (711 mm), 8" (203 mm)
Push-to-Open No Soft Close No
Wire Pulls
Wire Pulls Series, Solid Brass Wire Pulls 4" c/c, Brushed Chrome Finishes
Standard Features:
Collection: Wire Pull Series Material: Solid Brass Finish: Satin Chrome Screws Included: Yes Screw Size: 8-32 x 1" Length or Diameter:
Projection:
Width:
Center to Center: 4"
Grommets Round Wire Grommets, 2" to 3-1/8" Bore Hole Three Piece Plastic
Standard Features: New This style grommet has three pieces;
grommet cap, rotary cap and hole liner Rotating liner enables grommet cap wire opening to be adjusted to three positions: closed, half open, and fully opened Grommets available in 10 different colors Liner depths are 1" Grommets are available in four bore hole diameter sizes; 2", 2-3/8", 2-3/4", and 3-1/8"
PLEASE SELECT COLORS
Stem length 38", fits 14" bore. Base has hole for optional rubber cushion insert.
Material: Steel Finish: Brass Plated, Nickel, Brown
5mm Bore Metal "L" Shaped
2 34" joint length five knuckle hinge, tight screw pin and elongated holes on both leaves frame leaf length: 1 34" Material: .095 guage steel Finish: Satin Black, Dull Chrome
RPC Institutional
Magnetic Catch
Floor Plan @ Multi-Purpose LL32 2
FIELD VERIFY WALL DIMENSIONS
E1
1 32
85 1/2
FIELD VERIFY WALL DIMENSIONS
1Floor Plan @ Medication LL30
1 2 3
E1
121 1/2
S & W Cabinets Inc.
VUC595 John J Pershing VAMC
Shop Drawings
Scale:
Date:
Drawn by:
Revised:
Drawing number:
3/8"=1'
7/18/18
RL
1/18/19
Approved by:
KW
F
1 2
F
E1
Elevation @ Medication LL30
FIELD VERIFY WALL DIMENSIONS
Plastic Laminate Cabinet (PL-1)
25" Solid Surface Countertop (SS-1) w/ Backsplash
Sink By Others
CS
CS
CS
24 11243637
F F
F
Elevation @ Multi-Purpose LL32
FIELD VERIFY WALL DIMENSIONS
E1
25" Solid Surface Countertop (SS-1) w/ Backsplash
Sink By Others
Plastic Laminate Cabinet (PL-1)
CS
CS
CS
243624
Floor Plan @ Nurse Station LL29 3
FIELD VERIFY WALL DIMENSIONS
E3
E1
E2
1 3 42
85 1/2
60 1/2
S & W Cabinets Inc.
VUC595 John J Pershing VAMC
Shop Drawings
Scale:
Date:
Drawn by:
Revised:
Drawing number:
3/8"=1'
7/18/18
RL
1/18/19
Approved by:
KW
F F
1 3 4
F
Elevation @ Nurse Station LL29
FIELD VERIFY WALL DIMENSIONS
E1
Sink By Others
25" Solid Surface Countertop (SS-1) w/ Backsplash
25" Solid Surface Countertop (SS-1) w/ Backsplash
Plastic Laminate Cabinet (PL-1)
CS
CS
42 42
Elevation @ Nurse Station LL29
FIELD VERIFY WALL DIMENSIONS
E3
CS
Plastic Laminate Wall Panel
(PL-1)
Plastic Laminate Wall Panel
(PL-1)
Plastic Laminate Wall Panel
(PL-1)
Plastic Laminate Wall Panel
(PL-1)
6" Plastic Laminate Wall Cap
(PL-2)
Elevation @ Nurse Station LL29
FIELD VERIFY WALL DIMENSIONS
E2
Metal Support Brackets (Typ.)
Knee Space Knee Space Knee Space Knee Space Knee Space Knee Space
CS
25" Solid Surface Countertop
(SS-1)
6" Plastic Laminate Wall Cap
(PL-2)
Shop Drawings
Scale:
Date:
Drawn by:
Revised:
Drawing number:
3/8"=1'
7/18/18
RL
1/18/2019
Approved by:
KW
Floor Plan @ Reception LL09
FIELD VERIFY WALL DIMENSIONS
E2
E1
E3
7/
Elevation @ Reception LL09
FIELD VERIFY WALL DIMENSIONS
Metal Support Brackets (Typ.)
Knee Space Knee Space Knee Space
E1
CS
5 25" Solid Surface (SS-1)
Countertop
F
F
Elevation @ Reception LL09
FIELD VERIFY WALL DIMENSIONS
E2
25" Solid Surface Countertop (SS-1)
File File
CS
CS
CS
36 36 25 7/8
Shop Drawings
Scale:
Date:
Drawn by:
Revised:
Drawing number:
3/8"=1'
7/18/18
RL
Approved by:
KW
Elevation @ Reception LL09
FIELD VERIFY WALL DIMENSIONS
Metal Support Brackets (Typ.)
Knee Space Knee Space
CS
25" Solid Surface Countertop (SS-1) 25" Solid Surface
Countertop (SS-1)
E3
66 54
Floor Plan @ Soiled LL26
FIELD VERIFY WALL DIMENSIONS
2 1
E1
37 1/2
F
Elevation @ Soiled LL26
FIELD VERIFY WALL DIMENSIONS
25" Stainless Steel Countertop (ST-1) w/ Backsplash
Plastic Laminate Cabinet (PL-1)
E1
CS
Scale: 3/8" = 1' Approved By:
Drawing Number:
Revised: 3/27/2019
Drawn By: RL
Cross Section Detail CS 1Scale: 1" = 1'
1 2
51 2
Cross Section Detail CS 3Scale: 1" = 1'
51 2
51 2
Cross Section Detail CS 2Scale: 1" = 1'
Cross Section Detail CS 4Scale: 1" = 1'
11 2
13 4
Cross Section Detail CS 5Scale: 1" = 1'
-1
/2 51 2
Scale: 3/8" = 1' Approved By:
Drawing Number:
Revised: 3/27/2019
Drawn By: RL
Cross Section Detail CS 6Scale: 1" = 1'
-1
/2 51 2
Cross Section Detail CS 7Scale: 1" = 1'
-1
/2 51 2
Cross Section Detail CS 8Scale: 1" = 1'
-1
/2 51 2
51 2
1 2
Cross Section Detail CS 9Scale: 1" = 1'
File details come from the government source that posted it. Updated .