Attachment Drawing REF1 -V2.pdf
PDF 1 MB Posted
- Attached to
- Z2DZ--Improve Security and Safety 539-25-507
- Solicitation number
- 36C25026Q0505
About this file
This document is a set of technical specifications and schematic drawings for a mail room security and access control installation project.
The project involves installation of a fire-rated door assembly with a 1-hour fire/smoke barrier wall and a 1 1/2-hour fire-rated door with 25"x25" windows, compliant with Ohio Building Code 3104.5. The mail room intrusion system includes a motion intrusion detector with internal automatic charging DC standby power supply and primary AC operations, remote and key-operated activation/deactivation switch installed outside the room, automatic reset capability following intrusion, alarm level of 80-90 dB, and remote visual or audio attachment compliant with 28 16 11 INTRUSION DETECTION SYSTEM standards. The access control system incorporates an electromagnetic lock (DM62BD) with card reader/keypad entry, intercom system, and door control panel with fail-secure strike capability. Low-voltage wiring and conduit/box work fall under Division 28 contractor responsibility, while all one-voltage work and general trades (including door hardware and frame installation) fall under Division 26 contractor responsibility. Coordination among general trades, Division 26, and Division 28 contractors is required prior to rough-ins and frame installation. The specification includes detailed electrical requirements with 120V-20A dedicated emergency circuit, data drops, proximity reader/keypad wiring, alarm arm/disarm wiring, electronic door strike wiring, and door position switch provisions, all requiring common SMS junction boxes above ceiling at each door location.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 36C25026Q0505 0001.docx | DOCX document | |
| Atch 1 -WD.pdf | ||
| Atch 6 - REF1 Drawing.pdf | ||
| Atch 9 - Request for Information.docx | DOCX document | |
| Atch 12 - Single Source JCI PACS Redacted.pdf | ||
| Atch 13 - Single Source RF Technologies Redacted.pdf | ||
| 36C25026Q0505_1.docx | DOCX document | |
| Atch 3 - A Drawing.jpg | JPG image | |
| Atch 4 - B Drawing.jpg | JPG image | |
| Atch 5 - C Drawing.jpg | JPG image | |
| Atch 2 - CombinedSpecs 539-25-507.pdf | ||
| Atch 11 - VHA PCRA 2024_Final539-25-507.pdf | ||
| Atch 7 - VHA Directive 1192.01, Seasonal Influen..pdf | ||
| Atch 8 - Contractor EMR Certification Form.docx | DOCX document | |
| Atch 10 - Instructions for VAAR 852.219-75.docx | DOCX document |
Show all 15
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Ref1 o Fie life safety code reference to Ohio Building Code 3104.5, SOC drawings indicate this wall is a 1-hour fire/smoke barrier and the door is 1 1/2-hour fire rated.
o 25"x25" window in door leafs
Location:
Mail Room Intrusion System:
VHACINCordoS Rectangle
VHACINCordoS Rectangle
VHACINCordoS Rectangle
VHACINCordoS Rectangle
VHACINCordoS Line
VHACINCordoS Line
VHACINCordoS Line
VHACINCordoS Line
VHACINCordoS Line
VHACINCordoS Line
VHACINCordoS Line
VHACINCordoS Rectangle
VHACINCordoS Callout Side B (Interior Hallway)- LCN OPEN input - motion sensor
VHACINCordoS Callout Side A: Breezeway: Motion Sensor -LCN OPEN via Access Control System (ACS)
Text Box ACS shall be capable of providing: Lock output (maintained or timed) Open output (pulse) via ACS schedule relay REX input Intercom release input- ACS unlocks strike and pulses LCN open Presence Sensor(s) = LCN Safety/hold-open input (always active) covering both leaves CR- Card Reader and video intercom release: ACS unlocks fail-secure strikes and pulses open to both operator simultaneous opening.
Cloud+
VHACINCordoS Cloud+
VHACINCordoS Text Box A. Low voltage wiring All voltage and conduit/box work shall be the responsibility of the DIV 26 contractor B.General trades, DIV 26 and iv 28 contractors shall fully coordinate door and frame installation
VHACINCordoS Rectangle
VHACINCordoS Callout Relocate Intercom
VHACINCordoS Rectangle
VHACINCordoS Rectangle
VHACINCordoS Rectangle
VHACINCordoS Text Box Main Control
VHACINCordoS Text Box Door Control Panel
VHACINCordoS Text Box Door Lock Power Supply Panel
VHACINCordoS Line
VHACINCordoS Line
VHACINCordoS Line
VHACINCordoS Line
VHACINCordoS Line
VHACINCordoS Ellipse
VHACINCordoS Ellipse
VHACINCordoS Ellipse
VHACINCordoS Text Box
CR
VHACINCordoS Text Box
DM
VHACINCordoS Text Box
RX
VHACINCordoS Text Box
ES
VHACINCordoS Line
VHACINCordoS Line
VHACINCordoS Line
VHACINCordoS Line
VHACINCordoS Line
VHACINCordoS Line
VHACINCordoS Line
VHACINCordoS Line
VHACINCordoS Line
VHACINCordoS Text Box J
VHACINCordoS Ellipse
VHACINCordoS Line
VHACINCordoS Line
VHACINCordoS Line
VHACINCordoS Line
VHACINCordoS Typewritten Text E: Motion intrusion detector with - internal automatic charging DC standby power supply & primary AC operations, remote & key operated activation/deactivation switch installed outside of the room, automatic reset capability following intrusion, alarm level of 80-90 dB, remote visual or audio attachment, & low nuisance alarm rate as defined by 28 16 11 INTRUSION DETECTION SYSTEM.
Image
VHACINCordoS Text Box Reference Notes 1:
Access Control/Intrusion:
Notes:
1. 120V-20A Dedicated emergency circuit in wall mounted junction box.
2. Provide 120V direct connection to panels.
3. Extend data drop into new control panel.
4. Typical controlled door devices.
VHACINCordoS Text Box Single Door Notes:
1. .75”C. From box to common sms junction box above ceiling at each door location
2. 1-gang box for prox reader/keypad.
3. 1-gang box for alarm arm/disarm led lights.
4. Prox reader/keypad wiring to local door control panel
5. Alarm arm/disarm wiring to local alarm panel
6. Prox reader/keypad
7. Alarm arm/disarm led lights
8. Electronic door strike by G.C.
9. .5” Conduit from strike in door frame to common SMS junction box at each door location.
10. Electronic door strike wiring to local door control panel and low voltage power supply panel.
11. .5” Conduit from door frame to common SMS junction box above ceiling for at each door location.
12. Door position switch
13. Door position switch wiring to local door control panel.
14. 1-gang box above door for request to exit motion detector.
15. Request to exit motion detector wiring to local door control panel
16. Request to exit motion detector
17. Common sms junction box above ceiling at each door.
VHACINCordoS Text Box Coordination Notes
A. All low voltage wiring shown shall be the responsibility of the div 28 contractor unless otherwise noted.
B. All one voltage and conduit/box work shown shall be the responsibility of the div 26 contractor unless otherwise shown.
C. All door hardware material and installation shall be by the general trades contractor unless otherwise shown.
D. General trades, div 26 and div 28 contractors shall fully coordinate each door location prior to rough-ins and frame installation.
| Blank Page |
| Blank Page |
File details come from the government source that posted it. Updated .