Att. 1 MSDS Magic Salt.pdf

PDF 130 KB Posted

Attached to
S208--Landscaping, Ice and Snow Removal
Solicitation number
36C24926Q0196
Issued by

About this file

This is a Material Safety Data Sheet (MSDS) for PROMELT MAGIC SALT, a de-icing and anti-icing product manufactured and distributed by Innovative Surface Solutions. The product is a solid inorganic salt solution composed of sodium chloride (94.0-97.0%), magnesium chloride (1.72%), and molasses (0.43%). It is classified as not hazardous under GHS guidelines for physical, health, and environmental categories and is not controlled under WHMIS regulations.

The product presents minimal health and safety concerns. First-aid measures indicate that eye contact may cause slight irritation requiring water washing for 15 minutes, skin contact may cause slight irritation requiring soap and water washing, ingestion is low in toxicity but may cause diarrhea and vomiting in large quantities, and inhalation is not applicable. The material is stable under normal storage and handling conditions but should be stored in cool, dry, well-ventilated areas away from incompatible materials such as strong oxidizing agents, concentrated acids, and some metals. Exposure above 160°C produces toxic chloride gases including hydrogen chloride and halogenated compounds. Personal protective equipment recommended includes rubber gloves, boots, long sleeve shirts, and safety goggles; NIOSH-approved dust or mist respirators are required for dusty or misty conditions. The product is not regulated for transportation, not subject to CERCLA reporting requirements, not hazardous under SARA Category 311/312, and all ingredients are listed on the EPA TSCA Inventory and Canadian DSL. The MSDS was prepared in April 2015 by Innovative Surface Solutions and supersedes all previous versions.

View the file

Other files

File Type Posted
36C24926Q0196 0001.docx DOCX document
P09 SOW LOU Landscaping Ice and Snow Removal Services REV 6.17.2026.docx DOCX document
Attachment B.docx DOCX document
36C24926Q0196_1.docx DOCX document
Attachment A.docx DOCX document
P07 WD 2015-4717 Rev. 32 DATED 05.13.2026.docx DOCX document
36C24926Q0196.docx DOCX document

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

PROMELT MAGIC SALT Page 1 of 3

Material Safety Data Sheet Version: 4.0

Preparation Date: April, 2015

Supersedes All Previous Versions

SECTION 1: PRODUCT AND COMPANY IDENTIFICATION

Product Name: PROMELT MAGIC SALT

Product Use: De-icing, Anti-icing

Manufacturer/Distributor: Innovative Surface Solutions

78 Orchard Road

Ajax, Ontario

L1S 6L1

454 River Road

Glenmont, NY

12077

Telephone: 1-800-387-5777 1-800-257-5808

24-Hour Emergency Telephone: 613-996-6666 1-800-424-9300

WHMIS Classification: Not controlled

Chemical Family: Inorganic salt solution

SECTION 2: COMPOSITION / INFORMATION ON INGREDIENTS

Components CAS # % by Weight

Sodium Chloride 7647-14-5 94.0 to 97%.0%

Magnesium Chloride 7786-30-3 1.72%

Molasses - 0.43%

SECTION 3: HAZARDS IDENTIFICATION

GHS Classification

Physical Health Environment

Not Hazardous Not Hazardous Not Hazardous

GHS Label Element

Not Hazardous

SECTION 4: PHYSICAL & CHEMICAL PROPERTIES

Physical State: Solid

Appearance | Odor: Brown color / Pleasant odor

Odor Threshold: Not established

Specific Gravity: 2.165g/cm3 pH: Not applicable

Vapor Pressure: Not determined

Solubility in Water: Completely

% Volatile: Not determined

Vapor Density: Not determined

SECTION 5: FIRST-AID MEASURES

Eye May cause slight eye irritation, immediately wash with water for 15 minutes. Get medical attention if irritation persists.

Skin May cause skin irritation, wash skin thoroughly with soap and water. Get medical attention if irritation develops or persists.

Ingestion Low in toxicity. May cause diarrhea and vomiting when large quantities are ingested.

Inhalation Not applicable

PROMELT MAGIC SALT Page 2 of 3

SECTION 6: FIRE FIGHTING MEASURES

Suitable Extinguishing Media Appropriate extinguishing media. This product is not combustible. Choose media depending on surrounding fire. All extinguishing medias are allowed.

Specific Hazards Arising from the Chemical Expose to temperature above 160 C gives formation of toxic chloride gases

Protective Equipment and Precaution Protective actions and / or special protective equipment depending on surrounding fire. Aqueous solutions may cause surfaces to be extremely slippery and cause a slip hazard.

SECTION 7: ACCIDENTAL RELEASE MEASURES

Risks and Spills Seep up material and collect in a suitable container for disposal Flush spill area with water

Report releases as per local, state and federal authorities

Protective Equipment and Exposure Control See Section 9 for details

SECTION 8: HANDLING & STORAGE

Precaution for Safe Handling Wear protective equipment and equipment. Avoid contact with eyes, skin and clothing.

Avoid breathing mist or aerosols

Wash your skin thoroughly with soap and water after handling, if product comes in contact.

Safe Storage / Incompatibilities Store in cool, dry, well-ventilated area away from incompatible material.

Carbon Steel, polyester, polyethylene and polypropylene are suitable material for construction.

SECTION 9: EXPOSURE CONTROL / PERSONAL PROTECTION

Exposure Control Not established, no special precaution required.

Respiratory Protection For dusty or misty conditions, wear NIOSH approved dust or mist respirator.

Skin Protection Wear rubber gloves, boots and long sleeve shirts.

Eye Protection Wear safety goggles.

SECTION 10: STABILITY & REACTIVITY

Reactivity / Chemical Stability Not reactive. Stable under normal storage and handling conditions.

Conditions to Avoid Temperature below or close to product freezing point can give formation of crystals during storage.

Incompatible Material Strong oxidizing agents, concentrated acids and some metals.

Hazardous Decomposition Products Above 160 C product decomposes and emits hydrogen chloride, halogenated compounds and chloride gas.

SECTION 11: TOXICOLOGICAL INFORMATION

Ingestion Ingestion may cause slight irritation.

Inhalation Inhalation of mist may cause slight irritation of nose, throat and upper respiratory tract.

Eye May cause minor irritation with pain and tearing.

Skin May cause slight irritation on prolonged or repeated contact.

Carcinogenicity None of the component in the product is listed as carcinogen or suspected carcinogen by IARC, NTP or OSHA.

Reproductive Toxicity None.

Oral (rate) LD 50 8100 mg / Kg

Appraisal The material is classified as not toxic.

PROMELT MAGIC SALT Page 3 of 3

SECTION 12: ECOLOGICAL INFORMATION

Eco toxicity No data available.

Persistence and Degradability Biodegradation is not applicable to inorganic substances.

Bio accumulative Potential No data available.

Mobility in Soil No data available.

Other Adverse Effects None known.

SECTION 13: DISPOSAL CONSIDERATIONS

Dispose in accordance with local, state and federal environmental regulations.

SECTION 14: TRANSPORT INFORMATION

Proper Shipping Name Not regulated

UN Number None

Hazard Class / packing Group None

Label Required None

SECTION 15: REGULATORY INFORMATION

CERCLA This product is not subjected to CERCLA release reporting. Many States have more stringent release reporting requirements. Report spills required under federal, state and local regulations.

SARA Hazard Category (311 / 312) Not Hazardous

SARA 313 None

EPA TSCA Inventory All of the ingredients in this product are listed on the EPA TSCA

Inventory.

CEPA All the components of this product are listed on the Canadian DSL

WHMIS Classification Not classified as dangerous.

SECTION 16: PREPARATION INFORMATION

Prepared By: Innovative Surface Solutions

Telephone: 905-427-0318

Preparation Date: April, 2015

Superseded Date: ALL PREVIOUS VERSIONS

File details come from the government source that posted it. Updated .