26_51_00-0001_-_Interior_Lighting_-_CAN__.pdf

Submitted by Repco II

Catalog Number:

11-4-L52/830-FAF12125-DIM-UNV

Notes:

Type:

CB

REPCO - PA18-53163

H.E. Williams, Inc. Car thage, Missouri www.hew.com 417-358-4065 Surface Mount

CATALOG #: TYPE:

PROJECT: NOTES:

11 Series shown

SURFACE MOUNT – SOLID SIDES 11 | 12

FEATURES

Fully enclosed spring-loaded cam latches allow years of hassle-free maintenance.

Mitered corners provide clean, crisp appearance with no visible rivets or screws.

Heavy-gauge welded end plates and housing ensure durable, rigid construction.

Fully gasketed door minimizes contaminants.

This fixture is proudly made in the USA.

LED

CROSS SECTIONS

11 Series

3-13/16”

24-1/8”

12 Series

ORDERING INFORMATION

SERIES

11 1’ Wide, Surface Mount – Solid Sides

12 2’ Wide, Surface Mount – Solid Sides

NOMINAL LENGTH

2 2’

4 4’

LED PACKAGE

NOTE: Nominal lumens are based on AF12125 shielding.

EXAMPLE: L84/840

LUMEN

PACKAGE

NOMINAL

LUMENS MINIMUM CRI & CCT

AVERAGE

SYSTEM

WATTAGE

11-2 Series

827 = 82 CRI, 2700K

830 = 82 CRI, 3000K

835 = 82 CRI, 3500K

840 = 82 CRI, 4000K

850 = 82 CRI, 5000K

L26 2,600 27

11-4 Series L52 5,200 59

12-2 Series L43 4,300 52

12-4 Series L84 8,400 83

Nominal lumens based on 3500K CCT, actual lumens may vary.

Additional LED lumen packages available, consult factory.

DOOR FRAME

F White flat aluminum

R White regress aluminum

S White flat steel

FB Black flat aluminum

RB Black regress aluminum

SB Black flat steel

SHIELDING

AF12125 Frosted acrylic, pattern #12, .125” thick

DA Drop dish acrylic

OPTIONS

See Information section for mounting options.

EM/10W 10-watt emergency battery (120-277V only)

(L__) Additional lower lumen packages available.

Specify in increments of 100 nominal lumens.

Example: 7,500 nominal lumens =

12-4-L84/840-SAF12125-(L75)

DRIVER

DRV Driver prewired for non-dimming applications

DIM Driver prewired for 0-10V low-voltage dimming applications

VOLTAGE

120 120V

277 277V

UNV 120-277V

EXAMPLE 12 - 4 - L84/835 - S AF12125 - OPTIONS - DIM - UNV

SERIES NOMINAL LUMEN CRI & DOOR SHIELDING OPTIONS/ DRIVER VOLTAGE

LENGTH PACKAGE CCT FRAME ACCESSORIES

SERIES

11 1’ Wide, Surface Mount – Solid Sides

2 2’ Wid S f M S lid Sid

NOMINAL LENGTH

4 4’

LED PACKAGE

NOTE: Nominal lumens are based on AF12125 shielding.

EXAMPLE: L84/840

LUMEN

PACKAGE

NOMINAL

LUMENS MINIMUM CRI & CCT

AVERAGE

SYSTEM

WATTAGE

11-4 Series L52 5,200

830 = 82 CRI 3000K

835 82 CRI 3500K

830 = 82 CRI, 3000K

835 82 CRI 3500K

SHIELDING

AF12125 Frosted acrylic, pattern #12, .125” thick

DA D di h li

DOOR FRAME

F White flat aluminum

R Whi l i

DRIVER

DIM Driver prewired for 0-10V low-voltage dimming applications

VOLTAGE

UNV 120-277V

Index Page1/2Submitted On: Jun 19, 2018

Submitted by Repco II Catalog Number:

11-4-L52/830-FAF12125-DIM-UNV

Notes:

Type:

CB

REPCO - PA18-53163

H.E . W ill iams, Inc . C ar thage, Missour i w w w.hew.com 417-35 8 - 4 0 6 5Surface Mount

Page 2 of 2 Information contained herein is subject to change without notice. HEW70472JJ REV.04/12/18

11 | 12 SURFACE MOUNT – SOLID SIDES

LED 11 SERIES PHOTOMETRY Catalog #: 11-4-L52/835-SAF12125-DIM-UNV

TEST REPORT

INFORMATION

Test Report #: 18638.0

Date: 02/11/15

Lamp Type: LED

Rated Lumens: 5243 Watts: 59 Lumens Per Watt: 89.5

CRI: 82

CCT: 3479K

90°

0° 10° 20° 30°

40°

50°

60°

70°

80°

0° 45º 90º

CANDLEPOWER DISTRIBUTION

Vertical

Angle Horizontal Angle Zonal

Lumens0º 45º 90º 0º 2421. 2421. 2421.

5º 2405. 2400. 2400. 229.2

15º 2249. 2245. 2239. 636.3

25º 1997. 1976. 1961. 915.5

35º 1664. 1621. 1578. 1018.3

45º 1274. 1203. 1145. 933.1

55º 834. 765. 708. 688.2

65º 504. 453. 431. 456.3

75º 258. 242. 252. 263.7

85º 90. 90. 101. 102.1

90º 0. 0. 0.

LUMEN SUMMARY

Zone Lumens % Fixture

0º - 30º 1781. 34.0

0º - 40º 2799. 53.4

0º - 60º 4421. 84.3

0º - 90º 5243. 100.0

Total Luminaire:

0º - 180º 5243. 100.0

IES Spacing Criteria: End = 1.1 Diagonal= 1.1 Across = 1.1

12 SERIES PHOTOMETRY Catalog #: 12-4-L84/835-SAF12125-DIM-UNV

TEST REPORT

INFORMATION

Test Report #: 18637.0

Date: 02/11/15

Lamp Type: LED

Rated Lumens: 8430 Watts: 83 Lumens Per Watt: 101.1

CRI: 82

CCT: 3463K

90°

0° 10° 20° 30°

40°

50°

60°

70°

80°

0° 45º 90º

CANDLEPOWER DISTRIBUTION

Vertical

Angle Horizontal Angle Zonal

Lumens0º 45º 90º 0º 3849. 3849. 3849.

5º 3758. 3753. 3753. 358.4

15º 3518. 3509. 3509. 995.3

25º 3140. 3129. 3129. 1449.5

35º 2581. 2556. 2549. 1608.5

45º 1956. 1912. 1890. 1484.2

55º 1326. 1275. 1253. 1147.9

65º 808. 773. 766. 772.9

75º 420. 411. 437. 442.9

85º 147. 149. 173. 170.2

90º 0. 0. 0.

LUMEN SUMMARY

Zone Lumens % Fixture

0º - 30º 2803. 33.3

0º - 40º 4412. 52.3

0º - 60º 7044. 83.6

0º - 90º 8430. 100.0

Total Luminaire:

0º - 180º 8430. 100.0

IES Spacing Criteria: End = 1.1 Diagonal= 1.1 Across = 1.1

FIXTURE DETAILS

11 SERIES BACK VIEW

2 7 8

1 1 82 3 4

4 3 43

12 SERIES BACK VIEWS

SPECIFICATIONS

Housing – 20-gauge die-formed, welded C.R.S.

Door Frame – 20-gauge C.R.S. or 0.050” extruded aluminum with mitered corners. Fully enclosed spring-loaded cam latches.

Shielding – Frosted acrylic lens, pattern #12, .125” thick.

Finish – 92% minimum average reflective white polyester powder coat bonded to phosphate-free, multi-stage pretreated metal.

All parts painted after fabrication to facilitate installation, increase efficiency, and inhibit corrosion.

Electrical – High quality mid-power LED boards. L85 at 50,000 hours. 25°C maximum ambient operating temperature.

Mounting – Surface or suspended.

Listings –

■ cCSAus certified as luminaire suitable for dry or damp locations.

■ DesignLights Consortium qualified product. Not all versions of this product may be DLC qualified, see the DLC Qualified Products List at www.designlights.org/QPL

Warranty – 5-year limited warranty, see hew.com/warranty.

IMPORTANT:

Electrostatic sensitive unit. Observe precautions when handling.

Index Page2/2Submitted On: Jun 19, 2018

Submitted by Repco II Job Name:

Catalog Number:

11-4-L52/830-FAF12125-EM/10W-

DIM-UNV

Notes:

Type:

CB-EM

REPCO - PA18-53163

H.E. Williams, Inc. Car thage, Missouri www.hew.com 417-358-4065 Surface Mount

CATALOG #: TYPE:

PROJECT: NOTES:

11 Series shown

SURFACE MOUNT – SOLID SIDES 11 | 12

FEATURES

Fully enclosed spring-loaded cam latches allow years of hassle-free maintenance.

Mitered corners provide clean, crisp appearance with no visible rivets or screws.

Heavy-gauge welded end plates and housing ensure durable, rigid construction.

Fully gasketed door minimizes contaminants.

This fixture is proudly made in the USA.

LED

CROSS SECTIONS

11 Series

3-13/16”

24-1/8”

12 Series

ORDERING INFORMATION

SERIES

11 1’ Wide, Surface Mount – Solid Sides

12 2’ Wide, Surface Mount – Solid Sides

NOMINAL LENGTH

2 2’

4 4’

LED PACKAGE

NOTE: Nominal lumens are based on AF12125 shielding.

EXAMPLE: L84/840

LUMEN

PACKAGE

NOMINAL

LUMENS MINIMUM CRI & CCT

AVERAGE

SYSTEM

WATTAGE

11-2 Series

827 = 82 CRI, 2700K

830 = 82 CRI, 3000K

835 = 82 CRI, 3500K

840 = 82 CRI, 4000K

850 = 82 CRI, 5000K

L26 2,600 27

11-4 Series L52 5,200 59

12-2 Series L43 4,300 52

12-4 Series L84 8,400 83

Nominal lumens based on 3500K CCT, actual lumens may vary.

Additional LED lumen packages available, consult factory.

DOOR FRAME

F White flat aluminum

R White regress aluminum

S White flat steel

FB Black flat aluminum

RB Black regress aluminum

SB Black flat steel

SHIELDING

AF12125 Frosted acrylic, pattern #12, .125” thick

DA Drop dish acrylic

OPTIONS

See Information section for mounting options.

EM/10W 10-watt emergency battery (120-277V only)

(L__) Additional lower lumen packages available.

Specify in increments of 100 nominal lumens.

Example: 7,500 nominal lumens =

12-4-L84/840-SAF12125-(L75)

DRIVER

DRV Driver prewired for non-dimming applications

DIM Driver prewired for 0-10V low-voltage dimming applications

VOLTAGE

120 120V

277 277V

UNV 120-277V

EXAMPLE 12 - 4 - L84/835 - S AF12125 - OPTIONS - DIM - UNV

SERIES NOMINAL LUMEN CRI & DOOR SHIELDING OPTIONS/ DRIVER VOLTAGE

LENGTH PACKAGE CCT FRAME ACCESSORIES

SERIES

11 1’ Wide, Surface Mount – Solid Sides

2 2’ Wid S f M S lid Sid

NOMINAL LENGTH

4 4’

LED PACKAGE

NOTE: Nominal lumens are based on AF12125 shielding.

EXAMPLE: L84/840

LUMEN

PACKAGE

NOMINAL

LUMENS MINIMUM CRI & CCT

AVERAGE

SYSTEM

WATTAGE

11-4 Series L52 5,200

830 = 82 CRI 3000K

835 82 CRI 3500K

830 = 82 CRI, 3000K

835 82 CRI 3500K

SHIELDING

AF12125 Frosted acrylic, pattern #12, .125” thick

DA D di h li

DOOR FRAME

F White flat aluminum

R Whi l i

DRIVER

DIM Driver prewired for 0-10V low-voltage dimming applications

VOLTAGE

UNV 120-277V

g p EM/10W 10-watt emergency battery (120-277V only)

OPTIONS

Index Page1/2Submitted On: Jun 19, 2018

11-4-L52/830-FAF12125-EM/10W-

DIM-UNV

Notes:

Type:

CB-EM

REPCO - PA18-53163

H.E . W ill iams, Inc . C ar thage, Missour i w w w.hew.com 417-35 8 - 4 0 6 5Surface Mount

Page 2 of 2 Information contained herein is subject to change without notice. HEW70472JJ REV.04/12/18

11 | 12 SURFACE MOUNT – SOLID SIDES

LED 11 SERIES PHOTOMETRY Catalog #: 11-4-L52/835-SAF12125-DIM-UNV

TEST REPORT

INFORMATION

Test Report #: 18638.0

Date: 02/11/15

Lamp Type: LED

Rated Lumens: 5243 Watts: 59 Lumens Per Watt: 89.5

CRI: 82

CCT: 3479K

90°

0° 10° 20° 30°

40°

50°

60°

70°

80°

0° 45º 90º

CANDLEPOWER DISTRIBUTION

Vertical

Angle Horizontal Angle Zonal

Lumens0º 45º 90º 0º 2421. 2421. 2421.

5º 2405. 2400. 2400. 229.2

15º 2249. 2245. 2239. 636.3

25º 1997. 1976. 1961. 915.5

35º 1664. 1621. 1578. 1018.3

45º 1274. 1203. 1145. 933.1

55º 834. 765. 708. 688.2

65º 504. 453. 431. 456.3

75º 258. 242. 252. 263.7

85º 90. 90. 101. 102.1

90º 0. 0. 0.

LUMEN SUMMARY

Zone Lumens % Fixture

0º - 30º 1781. 34.0

0º - 40º 2799. 53.4

0º - 60º 4421. 84.3

0º - 90º 5243. 100.0

Total Luminaire:

0º - 180º 5243. 100.0

IES Spacing Criteria: End = 1.1 Diagonal= 1.1 Across = 1.1

12 SERIES PHOTOMETRY Catalog #: 12-4-L84/835-SAF12125-DIM-UNV

TEST REPORT

INFORMATION

Test Report #: 18637.0

Date: 02/11/15

Lamp Type: LED

Rated Lumens: 8430 Watts: 83 Lumens Per Watt: 101.1

CRI: 82

CCT: 3463K

90°

0° 10° 20° 30°

40°

50°

60°

70°

80°

0° 45º 90º

CANDLEPOWER DISTRIBUTION

Vertical

Angle Horizontal Angle Zonal

Lumens0º 45º 90º 0º 3849. 3849. 3849.

5º 3758. 3753. 3753. 358.4

15º 3518. 3509. 3509. 995.3

25º 3140. 3129. 3129. 1449.5

35º 2581. 2556. 2549. 1608.5

45º 1956. 1912. 1890. 1484.2

55º 1326. 1275. 1253. 1147.9

65º 808. 773. 766. 772.9

75º 420. 411. 437. 442.9

85º 147. 149. 173. 170.2

90º 0. 0. 0.

LUMEN SUMMARY

Zone Lumens % Fixture

0º - 30º 2803. 33.3

0º - 40º 4412. 52.3

0º - 60º 7044. 83.6

0º - 90º 8430. 100.0

Total Luminaire:

0º - 180º 8430. 100.0

IES Spacing Criteria: End = 1.1 Diagonal= 1.1 Across = 1.1

FIXTURE DETAILS

11 SERIES BACK VIEW

2 7 8

1 1 82 3 4

4 3 43

12 SERIES BACK VIEWS

SPECIFICATIONS

Housing – 20-gauge die-formed, welded C.R.S.

Door Frame – 20-gauge C.R.S. or 0.050” extruded aluminum with mitered corners. Fully enclosed spring-loaded cam latches.

Shielding – Frosted acrylic lens, pattern #12, .125” thick.

Finish – 92% minimum average reflective white polyester powder coat bonded to phosphate-free, multi-stage pretreated metal.

All parts painted after fabrication to facilitate installation, increase efficiency, and inhibit corrosion.

Electrical – High quality mid-power LED boards. L85 at 50,000 hours. 25°C maximum ambient operating temperature.

Mounting – Surface or suspended.

Listings –

■ cCSAus certified as luminaire suitable for dry or damp locations.

■ DesignLights Consortium qualified product. Not all versions of this product may be DLC qualified, see the DLC Qualified Products List at www.designlights.org/QPL

Warranty – 5-year limited warranty, see hew.com/warranty.

IMPORTANT:

Electrostatic sensitive unit. Observe precautions when handling.

Index Page2/2Submitted On: Jun 19, 2018

6SCALB79V303KE1M40D8/

6SCAHSCLPF

Notes:

Type:

FB

REPCO - PA18-53163

All Pathway® products meet or exceed requirements as established by the National Electrical Code. Specifications subject to change without notice.

Alzak® is a registered trademark of Alcoa.

Manufactured and tested to UL#1598, #UL8750 and CSA standards.

Note: Suitable for damp location.

Fixtures are not designed for direct contact with insulation.

Fixture: Type:

Project:

Pathway Lighting Products, Inc., P.O. Box 591, Old Saybrook, CT 06475-0591 voice 800.342.0592 • fax 800.207.0090 • www.pathwaylighting.com • e-mail: sales@pathwaylighting.com

APPLICATION

High-lumen recessed downlight features vertical adjustability that is suitable for sloped ceiling applications that require energy saving LED technology. Product is also ideal for areas that require wall washing and accent lighting. Multiple beam distributions are ideal substitutes for par lamps, allow flexibility for the designer and eliminate glare and cut off issues.

PRODUCT DATA

REFLECTOR: Dual-optic system includes upper cone which determines the beam distribution and lower angled reflector to finish the ceiling without glare. Upper reflector and LED engine are mounted to a single axis adjustable chassis that tilts up to 45º to accommodate sloped ceilings or to provide wall wash and accent lighting. Standard finish is soft clear Alzak with matching polished flange. Other custom color reflectors are available.

Consult factory.

HOUSING: Heavy-gauge galvanized steel housing provides a secure mounting platform for the electrical components and protects the optical assembly. Standard plaster flange allows up to one-inch ceiling thickness. LED module is accessible from below.

MOUNTING: Universal mounting brackets adjust vertically and accept L-BAR interocking, expandable c-channel hanger bars which are supplied standard. L-BARS are suitable for T-bar, wood joist and metal joist ceiling styles. Additional features on last page.

ELECTRICAL: 120 or 277 VAC, 50-60 Hz.

JUNCTION BOX: Heavy-gauge galvanized junction box pre-wired with grounding pigtail. Easy access covers. Multiple conduit knockouts listed for through branch circuit wiring.

LED MODULE: Bridgelux Vero 29 LED module. CRI = 80. Available in 90 CRI.

HEAT MANAGEMENT: Engineered heat sink provides passive cooling for optimum heat management of the LED engine.

DIMMING: Standard product is compatible with 0-10 volt dimming controls. Additional options available.

SERIES 6SCALB79V Sloped Ceiling 974-9275 Lumen Bridgelux LED - Open Downlight

LDBV23.0

CMCLUN

For Damp Location

5 Year Warranty

Catalog #:

6SCALB79V 6SCAH

Trim Trim Finish w/polished flange

6SCAH – Open Reflector with Hood to Minimize Uplight into Plenum

SCLPF – Soft Specular Clear Alzak HAZPF – Haze Alzak

For white painted flange, drop “PF” from Catalog #.

For other finishes, consult reflector section.

Example: 6SCAHSCLPFExample: 6SCALB79V404KE1ND8

• Expected lamp life to be 50,000 hours with 70% lumen maintenance when ambient temperatures do not exceed 45°C. Lower ambient temperatures yield longer lamp life.

3-IN-1-ER

• Sloped Ceiling

• Wall Wash

• Accent

• Single Axis Vertical

Adjustment

Fixture Series Delivered Lumens Color Temp. Input Voltage Beam Dist. Dimming

6SCALB79V

10 = (974L-1020L, 10W) 20 = (1947L - 2041L, 18W) 30 = (2832L - 2968L, 27W) 40 = (3717L - 3896L, 35W) 50 = (4603L - 4823L, 43W) 60 = (5488L - 5751L, 52W) 70 = (6727L-7049L, 65W) 80 = (7612L - 7977L, 75W) 90 = (8231L-8628L, 83W) 100 = (8851L - 9275L, 90W)

C9 = 90 CRI

See next page for details on delivered lumens.

5K = 5000K 4K = 4000K 35K = 3500K 3K = 3000K 27K = 2700K

E1 120 Volt E2 277 Volt

M40 = 40°

W50 = 50°

XW60 = 60°

FL70 = 70°

D8 = Xitanium 1% 0-10V

(linear) standard.

More Options on Next Page

Options

❑ EM^ = Emergency Power Pack

19.02"

5.88"

8.58"

15.38"

Rough Opening 6.75"

* Delivered lumens based on open reflector

6SCALB79V

30 = (2832L - 2968L, 27W)

3K = 3000K

E1 120 Volt E2 277 V l

M40 = 40°

D8 = Xitanium 1% 0-10V

(linear) standard.

6SCAH – Open Reflector with Hood to Minimize Uplight into Plenum

SCLPF – Soft Specular Clear Alzak

Trim Trim Finish w/polished flangeFixture Series Delivered Lumens Color Temp. Input Voltage Beam Dist. Dimming

Index Page1/4Submitted On: Jun 19, 2018

6SCAHSCLPF

Notes:

Type:

FB

REPCO - PA18-53163

Pathway Lighting Products, Inc., P.O. Box 591, Old Saybrook, CT 06475-0591 voice 800.342.0592 • fax 800.207.0090 • www.pathwaylighting.com • e-mail: sales@pathwaylighting.com

Dimming Options:

DMX^ Dimming Options

(interfaced through 0-10V driver)

PathWave^ Wireless Dimming Options

(interfaced through 0-10V driver)

DMXD8 = DMX Xitanium 1% (linear) ^ DMXDL8 = DMX Xitanium 1% (logarithmic) ^ DMXELD = DMX EldoLED 0% (logarithmic)*^ DMXELD1 = DMX EldoLED 1% (logarithmic)*^ DMXELD2 = DMX EldoLED 0% (linear)*^ DMXELD3 = DMX EldoLED 1% (linear) *^ DMXLS = DMX/LumaStream .3% (logarithmic) 8000L & 10,000L only ^

PWVD8 = PathWave/Xitanium 1% 0-10V (linear) ^ PWVDL8 = PathWave/Xitanium 1% 0-10V (logarithmic) ^ PWVELD = PathWave/EldoLED 0% (logarithmic) *^ PWVELD1 = Pathwave/EldoLED 1% (logarithmic) *^ PWVELD2 = PathWave/EldoLED 0% (linear) *^ PWVELD3 = PathWave/EldoLED 1% (linear) *^ PWVLS = PathWave/LumaStream .3% (logarithmic) 8000L & 10,000L only ^

0-10V Dimming Options Lutron Dimming Options DALI Dimming Options

D8 = Xitanium 1% 0-10V (linear) DL8= Xitanium 1% 0-10V (logarithmic) ELD = EldoLED 0-10V 0% (logarithmic)* ELD1 = EldoLED 0-10V 1% (logarithmic)* ELD2 = EldoLED 0-10V 0% (linear)* ELD3 = EldoLED 0-10V 1% (linear)* LS = LumaStream .3% (logarithmic) 8000L & 10,000L only

DE4 = Lutron Eco 1% (linear)$

D7 = Lutron 3 wire 1% (linear)$

DT1 = Lutron 2 wire 1% (linear)$

DAL = EldoLED DALI 0% (logarithmic)* DAL1 = EldoLED DALI 1% (logarithmic)*

Specify option by suffix (shown in bold-face type) Our White Paper regarding Linear vs. Logarithmic Operating Characteristics is available in our 'Downloads' section of our website, or you may request one my emailing Sales@PathwayLighting.com

* EldoLED options are only available on models with lumen designations 10-60.

$ Lutron options are only available on models with lumen designations 10-50.

^ DMX and Pathwave options are not compatible with emergency battery options.

LDBV23.0

CMCLUN

0-10V Dimming Options

D8 = Xitanium 1% 0-10V (linear) DL8 Xitani m 1% 0 10V (logarithmic)

Index Page2/4Submitted On: Jun 19, 2018

6SCAHSCLPF

Notes:

Type:

FB

REPCO - PA18-53163

Pathway Lighting Products, Inc., P.O. Box 591, Old Saybrook, CT 06475-0591 voice 800.342.0592 • fax 800.207.0090 • www.pathwaylighting.com • e-mail: sales@pathwaylighting.com

Above Values reflect 3500K color temperatures.

Scaling factors for other tempreratures: 2700K = .92 ; 3000K = .97 ; 4000K = 1.01 ; 5000K = 1.04

90 CRI = .83

FIXTURE TRIM WATTAGE RATED LUMENS

DELIVERED

LUMENS

BEAM

DISTRIBUTION

LPW

6SCALB79V1035KM40 6SCAHSCLPF 10 1000 1015 40° 101.50

6SCALB79V1035KW50 6SCAHSCLPF 10 1000 992 50° 99.18

6SCALB79V1035KXW60 6SCAHSCLPF 10 1000 1020 60° 102.03

6SCALB79V1035KXFL70 6SCAHSCLPF 10 1000 974 70° 97.36

6SCALB79V2035KM40 6SCAHSCLPF 18 2000 2030 40° 112.77

6SCALB79V2035KW50 6SCAHSCLPF 18 2000 1984 50° 110.20

6SCALB79V2035KXW60 6SCAHSCLPF 18 2000 2041 60° 113.36

6SCALB79V2035KXFL70 6SCAHSCLPF 18 2000 1947 70° 108.18

6SCALB79V3035KM40 6SCAHSCLPF 27 3000 2953 40° 109.36

6SCALB79V3035KW50 6SCAHSCLPF 27 3000 2885 50° 106.86

6SCALB79V3035KXW60 6SCAHSCLPF 27 3000 2968 60° 109.93

6SCALB79V3035KXFL70 6SCAHSCLPF 27 3000 2832 70° 104.90

6SCALB79V4035KM40 6SCAHSCLPF 35 4000 3875 40° 110.72

6SCALB79V4035KW50 6SCAHSCLPF 35 4000 3787 50° 108.19

6SCALB79V4035KXW60 6SCAHSCLPF 35 4000 3896 60° 111.30

6SCALB79V4035KXFL70 6SCAHSCLPF 35 4000 3717 70° 106.21

6SCALB79V5035KM40 6SCAHSCLPF 43 5000 4798 40° 111.58

6SCALB79V5035KW50 6SCAHSCLPF 43 5000 4688 50° 109.03

6SCALB79V5035KXW60 6SCAHSCLPF 43 5000 4823 60° 112.16

6SCALB79V5035KXFL70 6SCAHSCLPF 43 5000 4603 70° 107.04

6SCALB79V6035KM40 6SCAHSCLPF 52 6000 5721 40° 92.27

6SCALB79V6035KW50 6SCAHSCLPF 52 6000 5590 50° 90.16

6SCALB79V6035KXW60 6SCAHSCLPF 52 6000 5751 60° 92.75

6SCALB79V6035KXFL70 6SCAHSCLPF 52 6000 5488 70° 88.51

6SCALB79V7035KM40 6SCAHSCLPF 65 7000 7013 40° 107.88

6SCALB79V7035KW50 6SCAHSCLPF 65 7000 6852 50° 105.42

6SCALB79V7035KXW60 6SCAHSCLPF 65 7000 7049 60° 108.45

6SCALB79V7035KXFL70 6SCAHSCLPF 65 7000 6727 70° 103.49

6SCALB79V8035KM40 6SCAHSCLPF 75 8000 7935 40° 105.80

6SCALB79V8035KW50 6SCAHSCLPF 75 8000 7754 50° 103.38

6SCALB79V8035KXW60 6SCAHSCLPF 75 8000 7977 60° 106.35

6SCALB79V8035KXFL70 6SCAHSCLPF 75 8000 7612 70° 101.49

6SCALB79V9035KM40 6SCAHSCLPF 83 9000 8581 40° 103.39

6SCALB79V9035KW50 6SCAHSCLPF 83 9000 8385 50° 101.02

6SCALB79V9035KXW60 6SCAHSCLPF 83 9000 8626 60° 103.92

6SCALB79V9035KXFL70 6SCAHSCLPF 83 9000 8231 70° 99.17

6SCALB79V10035KM40 6SCAHSCLPF 90 10000 9227 40° 102.52

6SCALB79V10035KW50 6SCAHSCLPF 90 10000 9016 50° 100.18

6SCALB79V10035KXW60 6SCAHSCLPF 90 10000 9275 60° 103.06

6SCALB79V10035KXFL70 6SCAHSCLPF 90 10000 8851 70° 98.34

LDBV23.0

CMCLUN

Delivered lumen/wattage data for fixtures in 3500K color temperature and at 30 degree tilt position

Index Page3/4Submitted On: Jun 19, 2018

6SCAHSCLPF

Notes:

Type:

FB

REPCO - PA18-53163

LDBV23.0

CMCLUN

Pathway Lighting Products, Inc., P.O. Box 591, Old Saybrook, CT 06475-0591 voice 800.342.0592 • fax 800.207.0090 • www.pathwaylighting.com • e-mail: sales@pathwaylighting.com

Available Reflector Finishes

Standard Hanger Bars

Clear Soft Specular “SCL”

Pewter Diffused “EPW”

Soft Specular “SPW”

Haze Diffused “HAZ”

Straw Diffused “EST”

Soft Specular “SST”

Bronze Diffused “EBZ”

Soft Specular “SBZ”

Wheat Diffused “EWT”

Soft Specular “SWT”

OPTIONS & ACCESSORIES

Our standard reflector finish is soft specular clear Alzak (SCL) with a polished self-flange (PF). Additional hues are noted to left. Several of these are offered in both a soft specular and a diffused/matte finish. For colors not shown, contact our sales department for advice on custom anodized finishes.

Specified suffix of desired finish.

Example: 4VLEDSCLPF For white painted flange omit PF.

Interlocking L-Bar hanger bars are now standard with all recessed Coventry Architectural lighting fixtures. Installer friendly features include:

• L-Bars are fabricated from identical L-shaped cross sections that form a sturdy ½” by 1-1/2” C-channel profile for superior rigidity.

• Pre-marked with spacing locations for 24” T-bar; 16” and 24” joist ceilings (wood and metal).

• Extension locks with an easy-to-use integral twist tab. No separate fastener.

• Interlocking and expandable to 24”. Can be increased to 36” or 48” with the use of one additional bars.

• Allows for offset mounting.

• Integral and barbed nail spike for wood joist ceilings.

• Fits into the c-channel notches on our butterfly mounting bracket.

• Complete details including video demonstration is available at www.pathwaylighting.com.

To increase the included L-Bar set to a 36” length, order two model #015-954 and use one per side. To increase to a 48” length, order one #LBAR which is a complete set of four bars and use two per side.

Index Page4/4Submitted On: Jun 19, 2018

6SCALB79V303KE1M40D8-EM/

6SCAHSCLPF

Notes:

Type:

FB-EM

REPCO - PA18-53163

All Pathway® products meet or exceed requirements as established by the National Electrical Code. Specifications subject to change without notice.

Alzak® is a registered trademark of Alcoa.

Manufactured and tested to UL#1598, #UL8750 and CSA standards.

Note: Suitable for damp location.

Fixtures are not designed for direct contact with insulation.

Fixture: Type:

Project:

Pathway Lighting Products, Inc., P.O. Box 591, Old Saybrook, CT 06475-0591 voice 800.342.0592 • fax 800.207.0090 • www.pathwaylighting.com • e-mail: sales@pathwaylighting.com

APPLICATION

High-lumen recessed downlight features vertical adjustability that is suitable for sloped ceiling applications that require energy saving LED technology. Product is also ideal for areas that require wall washing and accent lighting. Multiple beam distributions are ideal substitutes for par lamps, allow flexibility for the designer and eliminate glare and cut off issues.

PRODUCT DATA

REFLECTOR: Dual-optic system includes upper cone which determines the beam distribution and lower angled reflector to finish the ceiling without glare. Upper reflector and LED engine are mounted to a single axis adjustable chassis that tilts up to 45º to accommodate sloped ceilings or to provide wall wash and accent lighting. Standard finish is soft clear Alzak with matching polished flange. Other custom color reflectors are available.

Consult factory.

HOUSING: Heavy-gauge galvanized steel housing provides a secure mounting platform for the electrical components and protects the optical assembly. Standard plaster flange allows up to one-inch ceiling thickness. LED module is accessible from below.

MOUNTING: Universal mounting brackets adjust vertically and accept L-BAR interocking, expandable c-channel hanger bars which are supplied standard. L-BARS are suitable for T-bar, wood joist and metal joist ceiling styles. Additional features on last page.

ELECTRICAL: 120 or 277 VAC, 50-60 Hz.

JUNCTION BOX: Heavy-gauge galvanized junction box pre-wired with grounding pigtail. Easy access covers. Multiple conduit knockouts listed for through branch circuit wiring.

LED MODULE: Bridgelux Vero 29 LED module. CRI = 80. Available in 90 CRI.

HEAT MANAGEMENT: Engineered heat sink provides passive cooling for optimum heat management of the LED engine.

DIMMING: Standard product is compatible with 0-10 volt dimming controls. Additional options available.

SERIES 6SCALB79V Sloped Ceiling 974-9275 Lumen Bridgelux LED - Open Downlight

LDBV23.0

CMCLUN

For Damp Location

5 Year Warranty

Catalog #:

6SCALB79V 6SCAH

Trim Trim Finish w/polished flange

6SCAH – Open Reflector with Hood to Minimize Uplight into Plenum

SCLPF – Soft Specular Clear Alzak HAZPF – Haze Alzak

For white painted flange, drop “PF” from Catalog #.

For other finishes, consult reflector section.

Example: 6SCAHSCLPFExample: 6SCALB79V404KE1ND8

• Expected lamp life to be 50,000 hours with 70% lumen maintenance when ambient temperatures do not exceed 45°C. Lower ambient temperatures yield longer lamp life.

3-IN-1-ER

• Sloped Ceiling

• Wall Wash

• Accent

• Single Axis Vertical

Adjustment

Fixture Series Delivered Lumens Color Temp. Input Voltage Beam Dist. Dimming

6SCALB79V

10 = (974L-1020L, 10W) 20 = (1947L - 2041L, 18W) 30 = (2832L - 2968L, 27W) 40 = (3717L - 3896L, 35W) 50 = (4603L - 4823L, 43W) 60 = (5488L - 5751L, 52W) 70 = (6727L-7049L, 65W) 80 = (7612L - 7977L, 75W) 90 = (8231L-8628L, 83W) 100 = (8851L - 9275L, 90W)

C9 = 90 CRI

See next page for details on delivered lumens.

5K = 5000K 4K = 4000K 35K = 3500K 3K = 3000K 27K = 2700K

E1 120 Volt E2 277 Volt

M40 = 40°

W50 = 50°

XW60 = 60°

FL70 = 70°

D8 = Xitanium 1% 0-10V

(linear) standard.

More Options on Next Page

Options

❑ EM^ = Emergency Power Pack

19.02"

5.88"

8.58"

15.38"

Rough Opening 6.75"

* Delivered lumens based on open reflector

6SCALB79V

30 = (2832L - 2968L, 27W)

3K = 3000K

E1 120 Volt E2 277 V l

M40 = 40°

D8 = Xitanium 1% 0-10V

(linear) standard.

6SCAH – Open Reflector with Hood to Minimize Uplight into Plenum

SCLPF – Soft Specular Clear Alzak

Trim Trim Finish w/polished flangeFixture Series Delivered Lumens Color Temp. Input Voltage Beam Dist. Dimming

Options

❑ EM^ = Emergency Power Pack ❑

6SCAHSCLPF

Notes:

Type:

FB-EM

REPCO - PA18-53163

Pathway Lighting Products, Inc., P.O. Box 591, Old Saybrook, CT 06475-0591 voice 800.342.0592 • fax 800.207.0090 • www.pathwaylighting.com • e-mail: sales@pathwaylighting.com

Dimming Options:

DMX^ Dimming Options

(interfaced through 0-10V driver)

PathWave^ Wireless Dimming Options

(interfaced through 0-10V driver)

DMXD8 = DMX Xitanium 1% (linear) ^ DMXDL8 = DMX Xitanium 1% (logarithmic) ^ DMXELD = DMX EldoLED 0% (logarithmic)*^ DMXELD1 = DMX EldoLED 1% (logarithmic)*^ DMXELD2 = DMX EldoLED 0% (linear)*^ DMXELD3 = DMX EldoLED 1% (linear) *^ DMXLS = DMX/LumaStream .3% (logarithmic) 8000L & 10,000L only ^

PWVD8 = PathWave/Xitanium 1% 0-10V (linear) ^ PWVDL8 = PathWave/Xitanium 1% 0-10V (logarithmic) ^ PWVELD = PathWave/EldoLED 0% (logarithmic) *^ PWVELD1 = Pathwave/EldoLED 1% (logarithmic) *^ PWVELD2 = PathWave/EldoLED 0% (linear) *^ PWVELD3 = PathWave/EldoLED 1% (linear) *^ PWVLS = PathWave/LumaStream .3% (logarithmic) 8000L & 10,000L only ^

0-10V Dimming Options Lutron Dimming Options DALI Dimming Options

D8 = Xitanium 1% 0-10V (linear) DL8= Xitanium 1% 0-10V (logarithmic) ELD = EldoLED 0-10V 0% (logarithmic)* ELD1 = EldoLED 0-10V 1% (logarithmic)* ELD2 = EldoLED 0-10V 0% (linear)* ELD3 = EldoLED 0-10V 1% (linear)* LS = LumaStream .3% (logarithmic) 8000L & 10,000L only

DE4 = Lutron Eco 1% (linear)$

D7 = Lutron 3 wire 1% (linear)$

DT1 = Lutron 2 wire 1% (linear)$

DAL = EldoLED DALI 0% (logarithmic)* DAL1 = EldoLED DALI 1% (logarithmic)*

Specify option by suffix (shown in bold-face type) Our White Paper regarding Linear vs. Logarithmic Operating Characteristics is available in our 'Downloads' section of our website, or you may request one my emailing Sales@PathwayLighting.com

* EldoLED options are only available on models with lumen designations 10-60.

$ Lutron options are only available on models with lumen designations 10-50.

^ DMX and Pathwave options are not compatible with emergency battery options.

LDBV23.0

CMCLUN

0-10V Dimming Options

D8 = Xitanium 1% 0-10V (linear) DL8 Xitani m 1% 0 10V (logarithmic)

6SCAHSCLPF

Notes:

Type:

FB-EM

REPCO - PA18-53163

Pathway Lighting Products, Inc., P.O. Box 591, Old Saybrook, CT 06475-0591 voice 800.342.0592 • fax 800.207.0090 • www.pathwaylighting.com • e-mail: sales@pathwaylighting.com

Above Values reflect 3500K color temperatures.

Scaling factors for other tempreratures: 2700K = .92 ; 3000K = .97 ; 4000K = 1.01 ; 5000K = 1.04

90 CRI = .83

FIXTURE TRIM WATTAGE RATED LUMENS

DELIVERED

LUMENS

BEAM

DISTRIBUTION

LPW

6SCALB79V1035KM40 6SCAHSCLPF 10 1000 1015 40° 101.50

6SCALB79V1035KW50 6SCAHSCLPF 10 1000 992 50° 99.18

6SCALB79V1035KXW60 6SCAHSCLPF 10 1000 1020 60° 102.03

6SCALB79V1035KXFL70 6SCAHSCLPF 10 1000 974 70° 97.36

6SCALB79V2035KM40 6SCAHSCLPF 18 2000 2030 40° 112.77

6SCALB79V2035KW50 6SCAHSCLPF 18 2000 1984 50° 110.20

6SCALB79V2035KXW60 6SCAHSCLPF 18 2000 2041 60° 113.36

6SCALB79V2035KXFL70 6SCAHSCLPF 18 2000 1947 70° 108.18

6SCALB79V3035KM40 6SCAHSCLPF 27 3000 2953 40° 109.36

6SCALB79V3035KW50 6SCAHSCLPF 27 3000 2885 50° 106.86

6SCALB79V3035KXW60 6SCAHSCLPF 27 3000 2968 60° 109.93

6SCALB79V3035KXFL70 6SCAHSCLPF 27 3000 2832 70° 104.90

6SCALB79V4035KM40 6SCAHSCLPF 35 4000 3875 40° 110.72

6SCALB79V4035KW50 6SCAHSCLPF 35 4000 3787 50° 108.19

6SCALB79V4035KXW60 6SCAHSCLPF 35 4000 3896 60° 111.30

6SCALB79V4035KXFL70 6SCAHSCLPF 35 4000 3717 70° 106.21

6SCALB79V5035KM40 6SCAHSCLPF 43 5000 4798 40° 111.58

6SCALB79V5035KW50 6SCAHSCLPF 43 5000 4688 50° 109.03

6SCALB79V5035KXW60 6SCAHSCLPF 43 5000 4823 60° 112.16

6SCALB79V5035KXFL70 6SCAHSCLPF 43 5000 4603 70° 107.04

6SCALB79V6035KM40 6SCAHSCLPF 52 6000 5721 40° 92.27

6SCALB79V6035KW50 6SCAHSCLPF 52 6000 5590 50° 90.16

6SCALB79V6035KXW60 6SCAHSCLPF 52 6000 5751 60° 92.75

6SCALB79V6035KXFL70 6SCAHSCLPF 52 6000 5488 70° 88.51

6SCALB79V7035KM40 6SCAHSCLPF 65 7000 7013 40° 107.88

6SCALB79V7035KW50 6SCAHSCLPF 65 7000 6852 50° 105.42

6SCALB79V7035KXW60 6SCAHSCLPF 65 7000 7049 60° 108.45

6SCALB79V7035KXFL70 6SCAHSCLPF 65 7000 6727 70° 103.49

6SCALB79V8035KM40 6SCAHSCLPF 75 8000 7935 40° 105.80

6SCALB79V8035KW50 6SCAHSCLPF 75 8000 7754 50° 103.38

6SCALB79V8035KXW60 6SCAHSCLPF 75 8000 7977 60° 106.35

6SCALB79V8035KXFL70 6SCAHSCLPF 75 8000 7612 70° 101.49

6SCALB79V9035KM40 6SCAHSCLPF 83 9000 8581 40° 103.39

6SCALB79V9035KW50 6SCAHSCLPF 83 9000 8385 50° 101.02

6SCALB79V9035KXW60 6SCAHSCLPF 83 9000 8626 60° 103.92

6SCALB79V9035KXFL70 6SCAHSCLPF 83 9000 8231 70° 99.17

6SCALB79V10035KM40 6SCAHSCLPF 90 10000 9227 40° 102.52

6SCALB79V10035KW50 6SCAHSCLPF 90 10000 9016 50° 100.18

6SCALB79V10035KXW60 6SCAHSCLPF 90 10000 9275 60° 103.06

6SCALB79V10035KXFL70 6SCAHSCLPF 90 10000 8851 70° 98.34

LDBV23.0

CMCLUN

Delivered lumen/wattage data for fixtures in 3500K color temperature and at 30 degree tilt position

6SCAHSCLPF

Notes:

Type:

FB-EM

REPCO - PA18-53163

LDBV23.0

CMCLUN

Pathway Lighting Products, Inc., P.O. Box 591, Old Saybrook, CT 06475-0591 voice 800.342.0592 • fax 800.207.0090 • www.pathwaylighting.com • e-mail: sales@pathwaylighting.com

Available Reflector Finishes

Standard Hanger Bars

Clear Soft Specular “SCL”

Pewter Diffused “EPW”

Soft Specular “SPW”

Haze Diffused “HAZ”

Straw Diffused “EST”

Soft Specular “SST”

Bronze Diffused “EBZ”

Soft Specular “SBZ”

Wheat Diffused “EWT”

Soft Specular “SWT”

OPTIONS & ACCESSORIES

Our standard reflector finish is soft specular clear Alzak (SCL) with a polished self-flange (PF). Additional hues are noted to left. Several of these are offered in both a soft specular and a diffused/matte finish. For colors not shown, contact our sales department for advice on custom anodized finishes.

Specified suffix of desired finish.

Example: 4VLEDSCLPF For white painted flange omit PF.

Interlocking L-Bar hanger bars are now standard with all recessed Coventry Architectural lighting fixtures. Installer friendly features include:

• L-Bars are fabricated from identical L-shaped cross sections that form a sturdy ½” by 1-1/2” C-channel profile for superior rigidity.

• Pre-marked with spacing locations for 24” T-bar; 16” and 24” joist ceilings (wood and metal).

• Extension locks with an easy-to-use integral twist tab. No separate fastener.

• Interlocking and expandable to 24”. Can be increased to 36” or 48” with the use of one additional bars.

• Allows for offset mounting.

• Integral and barbed nail spike for wood joist ceilings.

• Fits into the c-channel notches on our butterfly mounting bracket.

• Complete details including video demonstration is available at www.pathwaylighting.com.

To increase the included L-Bar set to a 36” length, order two model #015-954 and use one per side. To increase to a 48” length, order one #LBAR which is a complete set of four bars and use two per side.

HADL6-FF-2FW-12L-30K8-M-FW-G/

RIG6 DV DIM1

Notes:

Type:

FC

REPCO - PA18-53163

HADL6-032018

SPECIFICATIONS

HEAT SINK: Die-cast aluminum with external radial fins for natural convection.

ROUGH-IN FRAME: 18-gauge die-formed, corrosion-resistant steel (type 304 stainless with NAT option). Vertically adjustable collar accommodates ceiling thicknesses up to 2", adjustable post-installation. Universal mounting brackets accept 3/4" and 1-1/2" lathers channel, 1/2" EMT conduit and hanger bars. Quick-access junction box accessible post-installation from above and below ceiling. Includes (4) 1/2" and (2) 3/4" knock-outs to allow straight conduit runs. Listed for (8) 12AWG, 90oC conductors and feed-thru branch wiring. Provided with FMC with electrical quick-connect to Trim Section.

TRIM/HOUSING SECTION: IP-rated housing section incorporates the heat sink, LED module, optics and lower trim. Flush lens trim secured with four (4) Torx® tamper-resistant, captive fasteners.

See trim ordering information for available options.

OPTICAL: High-Efficiency mixing chamber design with regressed diffused tempered-glass lens producing uniform light output. Available with various reflector distribution patterns and finishes. Flush lens trim options include a clear lens. See distribution and reflector finish ordering information for available options.

ELECTRICAL: LED array available in multiple CCT and CRI combinations with a maximum 3-step MacAdam variation allowance. See Trim Ordering Information for available options. 120-277VAC or 347VAC, 50/60Hz electrical input with serviceable constant current driver (<20% THD, >0.90 PF). Minimum 85% driver efficiency. Standard 0-10V dimming with 1-100% range; 200μA max. source current. Optional DALI and Lutron EcoSystem dimming drivers with 1-100% range.

PHOTOMETRICS: Photometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For photometric information, go to www.kenall.com.

WARRANTY: Peace of Mind Guarantee® against breakage. Five (5) year warranty against mechanical defects. Five (5) year warranty on LED lamps and power regulation components for defects resulting in a fixture lumen depreciation of 30% or greater.

INSTALLATION: Suitable for ambient temperature temperatures of -30oC to +40oC.

LISTINGS: Luminaire is certified to UL standards by Intertek Testing Laboratory for non-IC and Wet Location installations. IP65 rating per IEC60598. Optional CCEA compliance. Approved by the New York State - Office of Mental Health.

Trim Style FF Flush Lens (With Fasteners - IP65)

Trim Finish 2FW Cold-Rolled Steel in Flat White 5BR Type 304 Stainless Steel with 4B Brushed Finish XBR Type 316 Stainless Steel with 4B Brushed Finish 5FW Type 304 Stainless Steel in Flat White XFW Type 316 Stainless Steel in Flat White PAFW Aluminum in Flat White

Lamp Power 12L 12 Watt LED 22L 22 Watt LED 33L 33 Watt LED 55L*I 55 Watt LED

HADL SERIES

MILLENIUM DOWNLIGHT

Lamp Color 30K8 3000K / 80 CRI min.

30K9 3000K / 90 CRI min.

35K8 3500K / 80 CRI min.

35K9 3500K / 90 CRI min.

40K8 4000K / 80 CRI min.

40K9 4000K / 90 CRI min.

50K8 5000K / 80 CRI min.

Distribution M Medium W Wide

Reflector Finish FW Flat White CS Clear Specular CSS Clear Semi-Specular

Flush Lens Type G 1/8" Clear Polycarbonate 9 1/4" Clear Polycarbonate

Rough-In RIG6 6" Rough-In

Input Voltage DV 120-277V, 50/60Hz 347* 347VAC, 60Hz

Driver Type DIM1 0-10V Dimming to 1% DALI DALI Dimming to 1% ECO1 Lutron EcoSystem®

Options LEL Emergency Battery Backup with Remote Test Switch NAT† Natatorium Environment FS Fuse & Holder CCEA CCEA Approved 9500 Torx® Screwdriver

* N/A with DALI or ECO1 Driver Type. N/A with LEL option † Requires selection of XBR or XFW Trim Finish. Rough-In frame constructed of Type 304 stainless steel in lieu of corrosion-resistant steel I Must be installed with a minimum 24" on-center spacing, 12" from wall, and have 3" clearance above the Trim/Housing

When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof. May be covered by patents found at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2018 Kenall Mfg. Co. All rights reserved.

www.kenall.com P: 800-4-Kenall F: 262-891-9701 10200 55th Street Kenosha, Wisconsin 53144

PROJECT INFORMATION

Job Name

Fixture Type

Catalog Number

Approved by

PRODUCT FEATURES:

» 6" sealed, recessed downlight with flush lens trim

» Peace of Mind Guarantee™ against breakage

» Delivered lumens: 715 - 5,305 lm

» 1% Dimming via 0-10V, DALI or EcoSystem control

Luminaires for High Abuse Applications

LED CCEA

OPTIONIP65

Rough-In

TRIM ROUGH-IN

Trim Finish Driver TypeLamp Color Reflector FinishTrim StyleModel Input VoltageLamp Power OptionsDistribution Flush Lens Type

RIG6HADL6 FF

ORDERING INFORMATION (EX: HADL6-FF-2FW-22L-40K8-W-CSS-G-RIG6-DV-DIM1)

Trim Style Lamp Color

TRIM

Trim Finish Lamp Color Reflector FinishTrim StyleModel Lamp Power Distribution Flush Lens TypeReflector Finish

HADL6 FF

FF Flush Lens (With Fasteners - IP65) y

FF Fl h L (Wi h F IP65)

Trim Finish 2FW Cold-Rolled Steel in Flat White l l h

Lamp Power 12L 12 Watt LED

30K8 3000K / 80 CRI min.

30K9 3000K / 90 CRI i p 30K8 3000K / 80 CRI i

Distribution M Medium W Wid

Reflector Finish FW Flat White CS Cl S l

Flush Lens Type G 1/8" Clear Polycarbonate

Rough-In

Rough-In

ROUGH-IN

Driver TypeInput Voltage

RIG6

RIG6 6" Rough-In

Input Voltage DV 120-277V, 50/60Hz

Driver Type DIM1 0-10V Dimming to 1% DALI DALI Di i t 1%

RIG6 DV DIM1

Notes:

Type:

FC

REPCO - PA18-53163

Subject to change without notice. Visit www.kenall.com for ies files and additional information.

Optic Lamp Power

Initial Delivered Lumens, By Lamp Color Efficacy (lm/W)

Input Power

(W)

Estd. L70 LED Life

(hrs)Distribution Reflector

Finish Lens Type 30K8 30K9 35K8 35K9 40K8 40K9 50K8

M

CS

G

12L 1,048 876 1,048 887 1,090 887 1,114 58 - 74 15 80,000

22L 1,716 1,435 1,716 1,452 1,785 1,452 1,823 60 - 76 24 85,000

33L 2,487 2,079 2,487 2,104 2,586 2,104 2,642 59 - 75 35 70,000

55L 4,436 3,709 4,436 3,754 4,613 3,754 4,713 60 - 76 62 75,000

12L 923 772 923 781 960 781 980 51 - 65 15 80,000

22L 1,511 1,263 1,511 1,279 1,571 1,279 1,605 53 - 67 24 85,000

33L 2,189 1,830 2,189 1,853 2,277 1,853 2,326 52 - 66 35 70,000

55L 3,905 3,265 3,905 3,305 4,061 3,305 4,149 53 - 67 62 75,000

CSS

G

12L 1,048 876 1,048 887 1,090 887 1,114 58 - 74 15 80,000

22L 1,716 1,435 1,716 1,452 1,785 1,452 1,823 60 - 76 24 85,000

33L 2,487 2,079 2,487 2,104 2,586 2,104 2,642 59 - 75 35 70,000

55L 4,436 3,709 4,436 3,754 4,613 3,754 4,713 60 - 76 62 75,000

12L 923 772 923 781 960 781 980 51 - 65 15 80,000

22L 1,511 1,263 1,511 1,279 1,571 1,279 1,605 53 - 67 24 85,000

33L 2,189 1,830 2,189 1,853 2,277 1,853 2,326 52 - 66 35 70,000

55L 3,905 3,265 3,905 3,305 4,061 3,305 4,149 53 - 67 62 75,000

FW

G

12L 972 813 972 822 1,011 822 1,033 54 - 69 15 80,000

22L 1,591 1,331 1,591 1,347 1,655 1,347 1,691 55 - 70 24 85,000

33L 2,305 1,928 2,305 1,951 2,398 1,951 2,450 55 - 70 35 70,000

55L 4,113 3,439 4,113 3,481 4,277 3,481 4,370 55 - 70 62 75,000

12L 856 715 856 724 890 724 909 48 - 61 15 80,000

22L 1,401 1,171 1,401 1,186 1,457 1,186 1,488 49 - 62 24 85,000

33L 2,030 1,697 2,030 1,718 2,111 1,718 2,156 48 - 62 35 70,000

55L 3,621 3,028 3,621 3,064 3,766 3,064 3,847 49 - 62 62 75,000

W

CS

G

12L 1,180 986 1,180 998 1,227 998 1,253 67 - 86 15 80,000

22L 1,932 1,615 1,932 1,635 2,009 1,635 2,052 67 - 86 24 85,000

33L 2,799 2,340 2,799 2,369 2,911 2,369 2,974 67 - 85 35 70,000

55L 4,993 4,175 4,993 4,225 5,193 4,225 5,305 67 - 86 62 75,000

12L 1,039 868 1,039 879 1,080 879 1,104 59 - 75 15 80,000

22L 1,701 1,422 1,701 1,439 1,769 1,439 1,807 59 - 75 24 85,000

33L 2,464 2,060 2,464 2,085 2,562 2,085 2,618 59 - 75 35 70,000

55L 4,396 3,675 4,396 3,720 4,571 3,720 4,670 59 - 75 62 75,000

CSS

G

12L 1,001 837 1,001 847 1,041 847 1,064 57 - 73 15 80,000

22L 1,639 1,371 1,639 1,387 1,705 1,387 1,742 57 - 73 24 85,000

33L 2,375 1,986 2,375 2,010 2,470 2,010 2,524 57 - 72 35 70,000

55L 4,238 3,543 4,238 3,586 4,407 3,586 4,502 57 - 73 62 75,000

12L 881 737 881 746 917 746 937 50 - 64 15 80,000

22L 1,443 1,207 1,443 1,221 1,501 1,221 1,534 50 - 64 24 85,000

33L 2,091 1,748 2,091 1,770 2,175 1,770 2,222 50 - 63 35 70,000

55L 3,731 3,119 3,731 3,157 3,880 3,157 3,964 50 - 64 62 75,000

FW

G

12L 1,109 928 1,109 939 1,154 939 1,179 63 - 81 15 80,000

22L 1,817 1,519 1,817 1,537 1,889 1,537 1,930 63 - 80 24 85,000

33L 2,632 2,201 2,632 2,227 2,737 2,227 2,796 63 - 80 35 70,000

55L 4,695 3,926 4,695 3,974 4,883 3,974 4,989 63 - 80 62 75,000

12L 977 817 977 827 1,016 827 1,038 56 - 71 15 80,000

22L 1,599 1,337 1,599 1,353 1,663 1,353 1,699 56 - 71 24 85,000

33L 2,317 1,937 2,317 1,961 2,410 1,961 2,462 55 - 70 35 70,000

55L 4,134 3,456 4,134 3,498 4,299 3,498 4,392 56 - 71 62 75,000

When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof. May be covered by patents found at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2018 Kenall Mfg. Co. All rights reserved.

www.kenall.com P: 800-4-Kenall F: 262-891-9701 10200 55th Street Kenosha, Wisconsin 53144

For additional photometry, go to www.kenall.com

HADL SERIES

MILLENIUM DOWNLIGHT

Luminaires for High Abuse Applications

PERFORMANCE

HADL6-032018

RIG6 DV DIM1

Notes:

Type:

FC

REPCO - PA18-53163

When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof. May be covered by patents found at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2018 Kenall Mfg. Co. All rights reserved.

www.kenall.com P: 800-4-Kenall F: 262-891-9701 10200 55th Street Kenosha, Wisconsin 53144

For additional photometry, go to www.kenall.com

HADL SERIES

MILLENIUM DOWNLIGHT

Luminaires for High Abuse Applications

PERFORMANCE

Wide Distribution Candela Curve

HADL6-FF-12L-40K8-W-CS-G

Distance to illuminated plane

(ft)

HADL6-FF-12L-40K8-M-CS-G

Medium Distribution

Candela Curve Initial center beam foot-candles

Beam diameter

(ft)

Initial center beam foot-candles

Beam diameter

(ft)

256 28.4 7.6 5' 86.4 3.2

22.5 7.8 6' 60.0 3.5

16.5 9.2 7' 44.1 4.0

12.6 10.5 8' 33.7 4.6

10.0 11.8 9' 26.7 5.2

8.1 13.0 10' 21.6 5.8

Spacing Criteria: 1.4 foot-candle multipliers for 30K8(.96), 30K9(.80), 35K8(.96), 35K9(.81), 40K9(.81), 50K8(1.0) Spacing Criteria: 0.62

Beam Angle: 59o Beam diameter is where foot-candles drop to 50% of maximum Beam Angle: 34o

Wide Distribution Candela Curve

HADL6-FF-22L-40K8-W-CS-G

Distance to illuminated plane

(ft)

HADL6-FF-22L-40K8-M-CS-G

Medium Distribution

Candela Curve Initial center beam foot-candles

Beam diameter

(ft)

Initial center beam foot-candles

Beam diameter

(ft)

420 46.6 7.6 5' 141.4 3.2

36.8 7.8 6' 98.2 3.5

27.0 9.2 7' 72.2 4.0

20.7 10.5 8' 55.2 4.6

16.4 11.8 9' 43.7 5.2

13.3 13.0 10' 35.4 5.8

Spacing Criteria: 1.4 foot-candle multipliers for 30K8(.96), 30K9(.80), 35K8(.96), 35K9(.81), 40K9(.81), 50K8(1.0) Spacing Criteria: 0.62

Beam Angle: 59o Beam diameter is where foot-candles drop to 50% of maximum Beam Angle: 34o

Wide Distribution Candela Curve

HADL6-FF-33L-40K8-W-CS-G

Distance to illuminated plane

(ft)

HADL6-FF-33L-40K8-M-CS-G

Medium Distribution

Candela Curve Initial center beam foot-candles

Beam diameter

(ft)

Initial center beam foot-candles

Beam diameter

(ft)

681 67.5 7.6 5' 204.9 3.2 2525

10101

53.4 7.8 6' 142.3 3.5

39.1 9.2 7' 104.5 4.0

29.9 10.5 8' 80.0 4.6

23.8 11.8 9' 63.2 5.2

19.3 13.0 10' 51.2 5.8

Spacing Criteria: 1.36 foot-candle multipliers for 30K8(.96), 30K9(.80), 35K8(.96), 35K9(.81), 40K9(.81), 50K8(1.0) Spacing Criteria: 0.36

Beam Angle: 54o Beam diameter is where foot-candles drop to 50% of maximum Beam Angle: 21o

Wide Distribution Candela Curve

HADL6-FF-55L-40K8-W-CS-G

Distance to illuminated plane

(ft)

HADL6-FF-55L-40K8-M-CS-G

Medium Distribution

Candela Curve Initial center beam foot-candles

Beam diameter

(ft)

Initial center beam foot-candles

Beam diameter

(ft)

1215 120.4 7.6 5' 365.5 3.2 4505

18019

13514

95.2 7.8 6' 253.8 3.5

69.7 9.2 7' 186.5 4.0

53.4 10.5 8' 142.8 4.6

42.5 11.8 9' 112.8 5.2

34.4 13.0 10' 91.4 5.8

Spacing Criteria: 1.36 foot-candle multipliers for 30K8(.96), 30K9(.80), 35K8(.96), 35K9(.81), 40K9(.81), 50K8(1.0) Spacing Criteria: 0.36

Beam Angle: 54o Beam diameter is where foot-candles drop to 50% of maximum Beam Angle: 21o

RIG6 DV DIM1

Notes:

Type:

FC

REPCO - PA18-53163

DIMENSIONAL DATA

When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof. May be covered by patents found at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2018 Kenall Mfg. Co. All rights reserved.

www.kenall.com P: 800-4-Kenall F: 262-891-9701 10200 55th Street Kenosha, Wisconsin 53144

For additional photometry, go to www.kenall.com

HADL SERIES

MILLENIUM DOWNLIGHT

Luminaires for High Abuse Applications

CROSS SECTION BOTTOM VIEW

RECOMMENDED CEILING CUT-OUT: 7.38" Dia.7.75" Dia.

6.00" Dia. APERTURE

12L: 6.54" 25L/33L: 6.64" 55L: 7.10"

17.45" 12.41"

8.13" (10.35" w/ LEL)

4.06" (5.90" w/ LEL)

Optional LEL

RIG6 DV DIM1 LEL

Notes:

Type:

FC-EM

REPCO - PA18-53163

HADL6-032018

SPECIFICATIONS

HEAT SINK: Die-cast aluminum with external radial fins for natural convection.

ROUGH-IN FRAME: 18-gauge die-formed, corrosion-resistant steel (type 304 stainless with NAT option). Vertically adjustable collar accommodates ceiling thicknesses up to 2", adjustable post-installation. Universal mounting brackets accept 3/4" and 1-1/2" lathers channel, 1/2" EMT conduit and hanger bars. Quick-access junction box accessible post-installation from above and below ceiling. Includes (4) 1/2" and (2) 3/4" knock-outs to allow straight conduit runs. Listed for (8) 12AWG, 90oC conductors and feed-thru branch wiring. Provided with FMC with electrical quick-connect to Trim Section.

TRIM/HOUSING SECTION: IP-rated housing section incorporates the heat sink, LED module, optics and lower trim. Flush lens trim secured with four (4) Torx® tamper-resistant, captive fasteners.

See trim ordering information for available options.

OPTICAL: High-Efficiency mixing chamber design with regressed diffused tempered-glass lens producing uniform light output. Available with various reflector distribution patterns and finishes. Flush lens trim options include a clear lens. See distribution and reflector finish ordering information for available options.

ELECTRICAL: LED array available in multiple CCT and CRI combinations with a maximum 3-step MacAdam variation allowance. See Trim Ordering Information for available options. 120-277VAC or 347VAC, 50/60Hz electrical input with serviceable constant current driver (<20% THD, >0.90 PF). Minimum 85% driver efficiency. Standard 0-10V dimming with 1-100% range; 200μA max. source current. Optional DALI and Lutron EcoSystem dimming drivers with 1-100% range.

PHOTOMETRICS: Photometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For photometric information, go to www.kenall.com.

WARRANTY: Peace of Mind Guarantee® against breakage. Five (5) year warranty against mechanical defects. Five (5) year warranty on LED lamps and power regulation components for defects resulting in a fixture lumen depreciation of 30% or greater.

INSTALLATION: Suitable for ambient temperature temperatures of -30oC to +40oC.

LISTINGS: Luminaire is certified to UL standards by Intertek Testing Laboratory for non-IC and Wet Location installations. IP65 rating per IEC60598. Optional CCEA compliance. Approved by the New York State - Office of Mental Health.

Trim Style FF Flush Lens (With Fasteners - IP65)

Trim Finish 2FW Cold-Rolled Steel in Flat White 5BR Type 304 Stainless Steel with 4B Brushed Finish XBR Type 316 Stainless Steel with 4B Brushed Finish 5FW Type 304 Stainless Steel in Flat White XFW Type 316 Stainless Steel in Flat White PAFW Aluminum in Flat White

Lamp Power 12L 12 Watt LED 22L 22 Watt LED 33L 33 Watt LED 55L*I 55 Watt LED

HADL SERIES

MILLENIUM DOWNLIGHT

Lamp Color 30K8 3000K / 80 CRI min.

30K9 3000K / 90 CRI min.

35K8 3500K / 80 CRI min.

35K9 3500K / 90 CRI min.

40K8 4000K / 80 CRI min.

40K9 4000K / 90 CRI min.

50K8 5000K / 80 CRI min.

Distribution M Medium W Wide

Reflector Finish FW Flat White CS Clear Specular CSS Clear Semi-Specular

Flush Lens Type G 1/8" Clear…