36C24518R0046-025.pdf

ULTIMA®

Square Lay-in fine texture

Typical applicaTions

• Offices

• Healthcare – assists in addressing

HIPAA and FGI acoustical requirements

• Classrooms

• Corridors

• Lobbies/reception areas

• Department stores/retail

• Kitchens, dining rooms, and food preparation areas (items 1935, 1938)

TechLineSM 877 ARMSTRONG armstrong.com/commceilings

10-YEAR

Availability

Items 1910, 1913

88%

1. Ultima Square Lay-in and Ultima Health Zone

2. Ultima Square Lay-in with Prelude 15/16" suspension system

DeTail (Other Suspension Systems compatible. Refer to listing on page 224.)

Create! colors available on items 1910, 1935.

See pages 165-167.

color

White

Ultima Square Lay-in with Prelude® 15/16" suspension system (Pg. 259)

Key selecTion aTTribuTes

• Smooth, clean, durable finish –

Washable, Impact-resistant, Scratch-resistant, Soil-resistant

• Scrubbable and water-repellent (Ultima Health Zone™)

• Excellent sound absorption

• Ceiling-2-Ceiling™ Post-consumer

Recycled Content options: Items

1910HRC, 1913HRC. 65%

Pre-consumer; 15% Post-consumer

• 88% Biobased content (see page 331)

• Available with AirGuard™ Coating

• Visual coordinates with Optima® for mixed (open/closed plan) applications

• Items 1910 and 1935 available with Create!™ colors and images – see pages 165-167

• Non-directional visual reduces installation time and scrap

• Compatible with TechZone™ Ceiling Systems (Pgs. 235-241)

• Meets USDA/FSIS guidelines for use in food processing areas (items 1935 and 1938)

• 30-Year Limited System Warranty against visible sag, mold/mildew, and bacterial growth edge profile susp. Dwg.

pgs. 273-277 armstrong.com/ catdwgs item no.

Dimensions (inches) ac ou st ic s

Fi re ra tin g li gh t re fle ct an ti-

M ol d

M ild ew sa g si st ce ri fie d lo w

Vo c em is si on s

Du ra bi lit y pr im ar y

(e m bo di ed en er gy re cy cl ed co nt en t◆ re cy e pr og ra m

W ar ra nt y† cac ulTiMa square lay-in UL Classified Humi-

Guard+ Water Repel Wash Scrub Impact Scratch Soil

Below 11MJ/SF Yes

No. of Years

15/16" Square Lay-in

Square Lay-in 9/16" Angled Tegular 15/16" Angled Tegular Ultima Plank ShipLap Long Edge Detail

Ultima Plank ShipLap K2C2 Short

15/16" Chamford Tegular Cirrus Profiles Chamfered

Tongue and GrooveConcealed Beveled K4C4

Classic Step Tegular Ultima Plank ShipLap Long Edge Detail

Ultima Plank ShipLap Beveled Tegular Short

15/16 Classic Step Tegular ~8-ID (99) (drw 10)

9/16" Beveled Tegular 15/16" Beveled Tegular 9/16" Square Cut Tegular 15/16" Square Tegular

9/16" Chamfered Tegular Cirrus Profiles Chamfered

Concealed Soft Look Radiused Tegular

9/16" Cubic Graphis NeoCubic

9/16" Flush Tegular Ledges

15/16" Flush Tegular Ledges

9/16" Wrapped Tegular Graphis Wrapped Linear and Cubic

9/16" Wrapped Linear and Mixed Corner “B”

(Flumes, Graphis Linear Corner & Dots & Squares)

Concealed Square Edge K4C4

Linear Cubic Beveled Crossgate

A B 15/16" Vector

C D 15/16" Vector C & D

A B C D

1 1420 6 x 48 x 3/4" 0.70

35 Class A

0.90

• • • – • – • • • • High • 30

1 1425 6 x 60 x 3/4" 0.70

35 Class A

0.90

• • • – • – • • • • High • 30

1 1990 12 x 48 x 3/4" 0.65 35 Class A

0.90

• • • – • – • • • • High • 30

1 1991 12 x 60 x 3/4" 0.65 35 Class A

0.90

• • • – • – • • • • High • 30

1 1992 12 x 72 x 3/4" 0.65 35 Class A

0.90

• • • – • – • • • • High • 30

1910HRC**

24 x 24 x 3/4" 24 x 24 x 3/4"

0.70

35 Class A

0.90

1913HRC**

24 x 48 x 3/4" 24 x 48 x 3/4"

0.70

35 Class A

0.90

• • • – • – • • • • High • 30

1 1984 24 x 60 x 3/4" 0.70

35 Class A

0.85

• • • – • – • • • • High • 30

1 1980 24 x 72 x 3/4" 0.70

35 Class A

0.90

• • • – • – • • • • High • 30

1 FastSize™ W: 12" - 30" / L: 18" - 72" 3/4" Thick

0.70

35 Class A

0.90

• • • – • – • • • • High • 30 ulTiMa Health Zone™/High Washability

15/16" Square Lay-in

Square Lay-in 9/16" Angled Tegular 15/16" Angled Tegular Ultima Plank ShipLap Long Edge Detail

Ultima Plank ShipLap K2C2 Short

15/16" Chamford Tegular Cirrus Profiles Chamfered

Tongue and GrooveConcealed Beveled K4C4

Classic Step Tegular Ultima Plank ShipLap Long Edge Detail

Ultima Plank ShipLap Beveled Tegular Short

15/16 Classic Step Tegular ~8-ID (99) (drw 10)

9/16" Beveled Tegular 15/16" Beveled Tegular 9/16" Square Cut Tegular 15/16" Square Tegular

9/16" Chamfered Tegular Cirrus Profiles Chamfered

Concealed Soft Look Radiused Tegular

9/16" Cubic Graphis NeoCubic

9/16" Flush Tegular Ledges

15/16" Flush Tegular Ledges

9/16" Wrapped Tegular Graphis Wrapped Linear and Cubic

9/16" Wrapped Linear and Mixed Corner “B”

(Flumes, Graphis Linear Corner & Dots & Squares)

Concealed Square Edge K4C4

Linear Cubic Beveled Crossgate

A B 15/16" Vector

C D 15/16" Vector C & D

A B C D

1, 2 1935 24 x 24 x 3/4" 0.70

35 Class A

0.86

• • • • • • • • • • High • 30

1 1938 24 x 48 x 3/4" 0.70

35 Class A

0.86

• • • • • • • • • • High • 30 ulTiMa with airGuard™ coating

15/16" Square Lay-in

Square Lay-in 9/16" Angled Tegular 15/16" Angled Tegular Ultima Plank ShipLap Long Edge Detail

Ultima Plank ShipLap K2C2 Short

15/16" Chamford Tegular Cirrus Profiles Chamfered

Tongue and GrooveConcealed Beveled K4C4

Classic Step Tegular Ultima Plank ShipLap Long Edge Detail

Ultima Plank ShipLap Beveled Tegular Short

15/16 Classic Step Tegular ~8-ID (99) (drw 10)

9/16" Beveled Tegular 15/16" Beveled Tegular 9/16" Square Cut Tegular 15/16" Square Tegular

9/16" Chamfered Tegular Cirrus Profiles Chamfered

Concealed Soft Look Radiused Tegular

9/16" Cubic Graphis NeoCubic

9/16" Flush Tegular Ledges

15/16" Flush Tegular Ledges

9/16" Wrapped Tegular Graphis Wrapped Linear and Cubic

9/16" Wrapped Linear and Mixed Corner “B”

(Flumes, Graphis Linear Corner & Dots & Squares)

Concealed Square Edge K4C4

Linear Cubic Beveled Crossgate

A B 15/16" Vector

C D 15/16" Vector C & D

A B C D

1900 24 x 24 x 3/4" 0.70

35 Class A

0.90

1903 24 x 48 x 3/4" 0.70

35 Class A

0.90

• • • – • – • • • • High • 30

** Other sizes not available for HRC items.

ULTIMA®

Square Lay-in fine texture

Visual selecTion perForMance selecTion Dots represent high level of performance.

M In eR A

L FIb eR

HRC items contain 15% or greater post-consumer recycled ceilings cleaning recommendations (items 1935, 1938) To clean panel, use a clean, white cloth with water or a mild detergent and wipe surface. To disinfect panel, lightly spray surface and wipe clean with a clean, white cloth. Acceptable colorless disinfectants include:

• Sodium hypochlorite • Hydrogen peroxide

• Quaternary ammonium

Weight; square Feet/carton 1910, 1913, 1938, 1900, 1903, 1935 –

1.08 lbs/SF; 48 SF/ctn 1980 – 1.08 lbs/SF; 72 SF/ctn 1984 – 1.08 lbs/SF; 80 SF/ctn 1990 – 1.08 lbs/SF; 24 SF/ctn 1991 – 1.08 lbs/SF; 30 SF/ctn 1992 – 1.08 lbs/SF; 36 SF/ctn

Minimum order Quantity 1 carton

Metric items available 1910M, 1913M – Metric items are subject to extended lead times and minimum quantities. Contact your representative for more details.

pHysical DaTa suspension sysTeMs Concealed 15/16"

Prelude® Concealed, Adhesive

Prelude Clean Room™

(Steel or Aluminum)

Material Wet-formed mineral fiber with DuraBrite® acoustically transparent membrane 1935, 1938 – Wet-formed mineral fiber with DuraBrite acoustically transparent water-repellent membrane surface Finish DuraBrite with factory-applied latex paint

Fire performance ASTM E84 and CAN/ULC S102 surface burning characteristics. Flame Spread Index 25 or less.

Smoke Developed Index 50 or less. (UL labeled) asTM e1264 classification Type IV, Form 2, Pattern E Fire Class A sag resistance HumiGuard® Plus – superior resistance to sagging in high humidity conditions up to, but not including, standing water and outdoor applications.

anti Mold/Mildew & bacteria BioBlock® Plus contains an anti-microbial treatment and provides guaranteed resistance against growth of mold/mildew and Gram-positive and Gram-negative odor/stain-causing bacteria for 30 years.

Voc emissions Third party certified compliant with California Department of Public Health CDPH/EHLB/Standard Method Version 1.1, 2010. This standard is the guideline for low emissions in LEED, CalGreen Title 24, ANSI/ASHRAE/USGBC/IES Standard 189; ANSI/GBI Green Building Assessment Protocol.

primary (embodied) energy See all LCA information on our EPD’s.

High recycled content◆

Contains greater than 50% total recycled content.

Total recycled content based on product composition of post-consumer and pre-consumer (post-industrial) recycled content per FTC guidelines.

insulation Value R Factor – 2.2 (BTU units) R Factor – 0.39 (Watts units)

30-year performance Guarantee & Warranty†

When installed with Armstrong Suspension System.

Details at armstrong.com/warranty re ne w ab le at er ia ls

81% RECYCLED

CONTENTUp

T o EPD

A v A I L A b L e

Calculate LEED contribution at armstrong.com/greengenie *locaTion DepenDenT

LeeD®

1911, 1911HRC

1912, 1912HRC

1914, 1914HRC, 1915

1915HRC, 1916, 1917

ac ou st ic s en er gy da yl ig ht vi ew s re cy ed co nt en t w as te gm t lo ca l* er ia ls in do or a ir qu al ity

LEED® is a registered trademark of the U.S. Green Building Council All other trademarks used herein are the property of AWI Licensing Company and/or its affiliates © 2013 AWI Licensing Company Printed in the United States of America

TechLineSM / 1 877 ARMSTRONG armstrong.com/commceilings

(search: ultima)

BPCS-4595-413

vhawaspejoa1 Cloudy vhawaspejoa1 Cloudy www.centiva.com 1701 Mars Hill Road, Florence AL USA 35630 1.888.CENTIVA Tel: 256.767.4990 Fax: 256.760.1763

CONTOUR SERIES – WOOD

BLOCKWOOD CP 1201-C Caramel Blockwood CP 1202-C Auburn Blockwood

Classification: ASTM F 1700 Class III Solid Vinyl Tile Construction: Multiple layers with backing which contains pre- and post-consumer material Overall Thickness: .120" / 3 mm (nominal) Wearlayer Thickness: .032" clear, rigid high density PVC Size: 36" x 36" (only) Edge: Square, Slight Bevel Surface Texture: Quarry (QU) recommended, Frost (FR) Standard Colors: 2 colors Warranty: 20 years Commercial, Lifetime Residential Recycling: Suitable Test Performance: ASTM E 648 Critical Radiant Flux Class1 CRF>0.45

ASTM E 662 Smoke Density <450; Good ASTM F 925 Chemical Resistance Excellent Slip Resistance ASTM C 1028* Very Good (*textures)

ASTM D 2047 Passes ADA Compliant FTC Slip Resistant Classified Product

CONTOUR CP 3104-C Atlantic Cherry CP 3105-C Aged Cherry CP 3106-C Bergerac Beech PLANK CP 3201-C Grappa Noce CP 3205-C Kingwood CP 3207-C Bolivian Rosewood

CP 3210-C Brazilian Cherry CP 3213-C Trio Walnut CP 3214-C Camphor Wood CP 3206-C Merrill Birch CP 3306-C Canadian Maple CP 3310-C Queensland Walnut CP 3311-C Hawaiian Teak CP 3312-C Golden Teak CP 3324-C Washed Teak CP 3313-C Golden Rosewood CP 0305-C Vintage Tower CP 0303-C Vintage Chalet CP 0301-C Vintage Lodge CP 0302-C Vintage Cabin CP 0306-C Vintage Inn CP 0311-C Summer Savannah CP 0321-C High Forest CP 0333-C English Flat CP 3302-C Fruitwood CP 3301-C Zebrano CP 3314-C Brown Strata CP 3316-C Olive Strata CP 3322-C Pale Strata CP 0355-C Pacific Lighthouse CP 0357-C Driftwood CP 0359-C Rustic Cedar CP 0351-C Pacific Boathouse CP 0353-C Pacific Shorehouse CP 3510-C Metallic Green CP 3511-C Metallic Gray CP 3512-C Metallic Black CP 0361-C Newborn CP 0383-C Wild Bohemian

CP 7314-C Carbon CP 7312-C Barrel CP 7310-C Moso CP 3625-C Crestwood CP 3623-C Foxwood CP 3621-C Country Manor CP 3612-C Redwood CP 3610-C Branch CP 3608-C Raven CP 3606-C Willow CP 3604-C Whisper CP 3602-C Thistle

CP 0381-C Wild BosaNova CP 3320-C Strand Bamboo CP 7316-C Ashen

Classification: ASTM F 1700 Class III Solid Vinyl Tile Construction: Multiple layers with backing which contains pre- and post-consumer material Overall Thickness: .120" / 3 mm (nominal) Wearlayer Thickness: .032" clear, rigid high density PVC Size: 3" x 36", 4" x 36", 6" x 36", or 7.2" x 48" Edge: Square, Slight Bevel Surface Texture: Frost (FR), Natural Grain (NG), Rough (RG), Sawn (SW),Tick (TK)

Recommended surface for each product is shown on sample in sample book Standard Colors: 41 Warranty: 20 years Commercial, Lifetime Residential Recycling: Suitable Test Performance: ASTM E 648 Critical Radiant Flux Class1 CRF>0.45

ASTM E 662 Smoke Density <450; Good ASTM F 925 Chemical Resistance Excellent Slip Resistance ASTM C 1028* Very Good (*textures)

ASTM D 2047 Passes ADA Compliant FTC Slip Resistant Classified Product

SPCCALL_06.03.13_BOLIVE REV0613

vhawaspejoa1 Cloudy

Order a Sample Download Spec Sheet (PDF)

Tweet 0

Marks of time and wear give this red-brown cherry plank a vintage character.

Series: Contour

Classification: ASTM F 1700 Class III Solid Vinyl Tile

Construction:

Layered product consisting of wearlayer, decorative film, and backing with pre- and post-consumer content

Overall Thickness:

.120 in. / 3 mm (nominal)

Wearlayer Thickness:

.032 in. clear, rigid high density PVC

Size: 4 x 36 in., 6 x 36 in., or 7.2 x 48 in. plus additional custom sizes

Edge: Square Edge (SE) or Slight Bevel (SB)

Surface Texture:

Natural Grain (NG) recommended. Other textures available upon request.

Standard Colors:

1 color

Warranty:

20 year Commercial Limited Wear Warranty and Lifetime Residential Limited Wear Warranty

Recycling: 100% Recyclable

Test Performance:

ASTM F 137 Flexibility – Passes, ASTM 2199 Dimensional Stability – Passes, ASTM F 970 and ASTM F 1914 Residual Indentation – Excellent, ASTM E 648 Flammability – Class 1 CRF>0.45, ASTM C 1028* Slip Resistance – Very Good (*textures), ASTM D 2047 – Passes, ADA Compliant – FTC Slip Resistant Classified Product, ASTM E 662 Smoke Density – <450; Good, ASTM D 3884 Abrasion – Excellent, ITTS 205 Castor Chair Suitability – Very Good, ASTM F 1515 – Very Good, ASTM F 925 Chemical Resistance – Excellent

CP 3612-C Redwood CP 3207-C Bolivian Rosewood CP 0355-C Pacific Lighthouse WP OL03-E Cinnamon Olivet WP 3315-E Mahogany

CP 0321-C HIGH FOREST

RELATED PRODUCTS

News & Events

A COLLECTION OF

PRESS RELEASES

AND UPCOMING

EVENTS.

Centiva First Step

App

AVAILABLE NOW

FOR IPHONE AND

IPAD.

RESOURCES

Library

A COLLECTION OF

ALL PRINTED

LITERATURE,

DOCUMENTS AND

MEDIA.

RECENT POSTS

• NeoCon 2013

EVENTS

• Employee

Spotlight: Jared Hamm

THINKING

• The Green Way

FEATURED

SEE OUR PINS

F o l l o w

M e o n

P i n t e r e s t

More Pins

FACEBOOK

Centiva

Like 1,278

Centiva

The Centiva

BRITES in the floor match the pattern along the ceiling.

Centiva BRITES come in various sizes up to a 36" x 36", and have a Slate surface texture.

© 2013 Centiva, A Tarkett Company, all rights reserved.

• Contact Us• / Privacy• / CAT Login• / Site Map

Like 0

••• • • •• PRODUCTS • TECHNICAL • THE GREEN WAY • INSIDE CENTIVA • CASE STUDIES • CUSTOM DESIGN • C•MEDIA

Page 1 of 1CP 0321-C High Forest | Centiva Flooring

10/16/2013htt ://centiva.com/centiva-floorin / lank-hi h-forest-c -0321-c-hi h-forest/ vhawaspejoa1 Cloudy

Polygon Line www.centiva.com

Style Specifications — Contour Series

1701 Mars Hill Road, Florence AL USA 35630 1.888.CENTIVA Tel: 256.767.4990 Fax: 256.760.1763

All floors shown or listed in this specification shall be Contour Series by Centiva, Florence, AL, 35630.

Specific product shall be: _ _ _ _ _ _ _ _ _ _ in size _ _" x _ _" Style Color Series Surface Edge

The Centiva Contour Series shall be heterogeneous, resilient flooring with a .032" high density wearlayer. All products shall have an overall gauge of .120" (3 mm) nominal. See individual product specification for sizes offered in each line.The resilient tile shall be manufactured in accordance with ASTM Specification F-1700 and shall be asbestos free. All products shall have a Commercial Limited 20-year Wear Warranty and Residential Lifetime Wear Warranty. The adhesive shall be CENTI 2001 Wet Set, CENTI 6000 SP (Special Purpose), or CENTI 2000 EP (epoxy). Installation shall be in accordance with the latest Centiva Installation Guidelines.

It is recommended that all Contour square tiles be installed tessellated or in one direction.

Additional sizes, surface textures, and edge treatments are available upon request.

Ask your Centiva consultant for more information.

CONTOUR PLANK – CP 0321-C High Forest

Classification: ASTM F 1700 Class III Solid Vinyl Tile Construction: Layered product consisting of wearlayer, decorative film, and backing with pre- and post-consumer content Overall Thickness: .120" / 3 mm (nominal) Wearlayer Thickness: .032" clear, rigid high density PVC Size: 3" x 36", 4" x 36", 6" x 36", or 7.2" x 48" plus additional custom sizes Edge: Square Edge (SE) or Slight Bevel (SB) Surface Texture: Natural Grain (NG) recommended. Additional surface textures available upon request.

Warranty: 20 years Commercial, Lifetime Residential Recycling: Suitable Test Performance: ASTM E 648 Critical Radiant Flux Class1 CRF>0.45

ASTM E 662 Smoke Density <450 ASTM F 925 Chemical Resistance Excellent Slip Resistance ADA Compliant Varies with surface texture

FTC Slip Resistant Classified Product

C

Order a Sample Download Spec Sheet (PDF)

Tweet 0

The constrasting color and figuring of this exotic plank ranges from tones of copper to cream.

Series: Contour

Classification: ASTM F 1700 Class III Solid Vinyl Tile

Construction:

Layered product consisting of wearlayer, decorative film, and backing with pre- and post-consumer content

Overall Thickness:

.120 in. / 3 mm (nominal)

Wearlayer Thickness:

.032 in. clear, rigid high density PVC

Size: 4 x 36 in., 6 x 36 in., or 7.2 x 48 in. plus additional custom sizes

Edge: Square Edge (SE) or Slight Bevel (SB)

Surface Texture:

Tick (TK) recommended. Other textures available upon request.

Standard Colors:

1 color

Warranty:

20 year Commercial Limited Wear Warranty and Lifetime Residential Limited Wear Warranty

Recycling: 100% Recyclable

Test Performance:

ASTM F 137 Flexibility – Passes, ASTM 2199 Dimensional Stability – Passes, ASTM F 970 and ASTM F 1914 Residual Indentation – Excellent, ASTM E 648 Flammability – Class 1 CRF>0.45, ASTM C 1028* Slip Resistance – Very Good (*textures), ASTM D 2047 – Passes, ADA Compliant – FTC Slip Resistant Classified Product, ASTM E 662 Smoke Density – <450; Good, ASTM D 3884 Abrasion – Excellent, ITTS 205 Castor Chair Suitability – Very Good, ASTM F 1515 – Very Good, ASTM F 925 Chemical Resistance – Excellent

CP 3313-C Golden Rosewood CP 3214-C Camphor Wood CP 0383-C Wild Bohemian WP GW19-E Antique Ochre WP 3208-E Wheat Ash

CP 3210-C BRAZILIAN CHERRY

RELATED PRODUCTS

News & Events

A COLLECTION OF

PRESS RELEASES

AND UPCOMING

EVENTS.

Centiva First Step

App

AVAILABLE NOW

FOR IPHONE AND

IPAD.

RESOURCES

Library

A COLLECTION OF

ALL PRINTED

LITERATURE,

DOCUMENTS AND

MEDIA.

RECENT POSTS

• Industry Focus

THINKING

• Employee

Spotlight: Trent Dawson

THINKING

• The Green Way

FEATURED

SEE OUR PINS

Unable to load Pinterest pins for 'Centiva'

More Pins

FACEBOOK

© 2013 Centiva, A Tarkett Company, all rights reserved.

• Contact Us• / Privacy• / CAT Login• / Site Map

5Like

Tandus Centiva

2,249 people like Tandus Centiva.

Facebook social plugin

Like

••• • • •• PRODUCTS • TECHNICAL • THE GREEN WAY • INSIDE CENTIVA • CASE STUDIES • CUSTOM DESIGN • C•MEDIA

Page 1 of 1CP 3210-C Brazilian Cherry | Centiva Flooring

1/14/2014htt ://centiva.com/centiva-floorin / lank-brazilian-cherr -c -3210-c-brazilian-cherr / vhawaspejoa1 Cloudy www.centiva.com

Style Specifications — Contour Series

1701 Mars Hill Road, Florence AL USA 35630 1.888.CENTIVA Tel: 256.767.4990 Fax: 256.760.1763

All floors shown or listed in this specification shall be Contour Series by Centiva, Florence, AL, 35630.

Specific product shall be: _ _ _ _ _ _ _ _ _ _ in size _ _" x _ _" Style Color Series Surface Edge

The Centiva Contour Series shall be heterogeneous, resilient flooring with a .032" high density wearlayer. All products shall have an overall gauge of .120" (3 mm) nominal. See individual product specification for sizes offered in each line.The resilient tile shall be manufactured in accordance with ASTM Specification F-1700 and shall be asbestos free. All products shall have a Commercial Limited 20-year Wear Warranty and Residential Lifetime Wear Warranty. The adhesive shall be CENTI 2001 Wet Set, CENTI 6000 SP (Special Purpose), or CENTI 2000 EP (epoxy). Installation shall be in accordance with the latest Centiva Installation Guidelines.

It is recommended that all Contour square tiles be installed tessellated or in one direction.

Additional sizes, surface textures, and edge treatments are available upon request.

Ask your Centiva consultant for more information.

CONTOUR PLANK – CP 3210-C Brazilian Cherry

Classification: ASTM F 1700 Class III Solid Vinyl Tile Construction: Layered product consisting of wearlayer, decorative film, and backing with pre- and post-consumer content Overall Thickness: .120" / 3 mm (nominal) Wearlayer Thickness: .032" clear, rigid high density PVC Size: 3" x 36", 4" x 36", 6" x 36", or 7.2" x 48" plus additional custom sizes Edge: Square Edge (SE) or Slight Bevel (SB) Surface Texture: Tick (TK) recommended. Additional surface textures available upon request.

Warranty: 20 years Commercial, Lifetime Residential Recycling: Suitable Test Performance: ASTM E 648 Critical Radiant Flux Class1 CRF>0.45

ASTM E 662 Smoke Density <450 ASTM F 925 Chemical Resistance Excellent Slip Resistance ADA Compliant Varies with surface texture

FTC Slip Resistant Classified Product

C

Baroque MD-18 Checkerboard MD-01 Compass MD-10

Discovery MD-08 Entwined MD-17 Feather MD-31

MEDALLIONS

Add impact to an entrance, hallway or other area within a space.

Circular medallions are available in a standard size with a 48″ diameter. Square modules are available in standard sizes of 18″ and 36″. All Centiva products can be used in medallions and modules. These designs are easily customized to your specifications.

••• • • •• PRODUCTS • TECHNICAL • THE GREEN WAY • INSIDE CENTIVA • CASE STUDIES • CUSTOM DESIGN • C•MEDIA

DISCOVERY MD-08

Page 1 of 2Medallions | Centiva Flooring

1/14/2014htt ://centiva.com/cfd/medallions/

Fiddlehead MD-14 Interlocked Squares MD-35 Palm MD-32

Rosette MD-06 Stardom MD-19 Starlight MD-11

Swirl MD-20 Symmetry MD-16 Windmill MD-02

News & Events

A COLLECTION OF

PRESS RELEASES

AND UPCOMING

EVENTS.

Centiva First Step

App

AVAILABLE NOW

FOR IPHONE AND

IPAD.

RESOURCES

Library

A COLLECTION OF

ALL PRINTED

LITERATURE,

DOCUMENTS AND

MEDIA.

RECENT POSTS

• Industry Focus

THINKING

• Employee

Spotlight: Trent Dawson

THINKING

• The Green Way

FEATURED

SEE OUR PINS

Unable to load Pinterest pins for 'Centiva'

More Pins

FACEBOOK

© 2013 Centiva, A Tarkett Company, all rights reserved.

• Contact Us• / Privacy• / CAT Login• / Site Map

Tandus Centiva

2,249 people like Tandus Centiva.

Facebook social plugin

Like

Page 2 of 2Medallions | Centiva Flooring

1/14/2014htt ://centiva.com/cfd/medallions/

Parkway BD-01 Stepping Stone 1 BD-02 Diamond 1 BD-03

Avenue BD-04 Studio BD-05 Diamond 2 BD-06

Diamond 3 BD-07 Geometric BD-08 Dots BD-09

Rope BD-10 Greek Key BD-13 Leaf BD-14

Stepping Stone 2 BD-15 Garland BD-17 Gothic BD-18

Ribbon BD-16

BORDERS

Create or accent an area in a space with a border. These border designs are available in 4″ and 6″ widths. All Centiva products can be used for borders. These designs are easily customized to your specifications.

••• • • •• PRODUCTS • TECHNICAL • THE GREEN WAY • INSIDE CENTIVA • CASE STUDIES • CUSTOM DESIGN • C•MEDIA

DIAMOND 1 BD-03

Page 1 of 2Borders | Centiva Flooring

1/13/2014htt ://centiva.com/cfd/borders/

News & Events

A COLLECTION OF

PRESS RELEASES

AND UPCOMING

EVENTS.

Centiva First Step

App

AVAILABLE NOW

FOR IPHONE AND

IPAD.

RESOURCES

Library

A COLLECTION OF

ALL PRINTED

LITERATURE,

DOCUMENTS AND

MEDIA.

RECENT POSTS

• Industry Focus

THINKING

• Employee

Spotlight: Trent Dawson

THINKING

• The Green Way

FEATURED

SEE OUR PINS

Unable to load Pinterest pins for 'Centiva'

More Pins

FACEBOOK

© 2013 Centiva, A Tarkett Company, all rights reserved.

• Contact Us• / Privacy• / CAT Login• / Site Map

Tandus Centiva

2,249 people like Tandus Centiva.

Facebook social plugin

Like

Page 2 of 2Borders | Centiva Flooring

1/13/2014htt ://centiva.com/cfd/borders/

Spectrim Building Products,LLC P.O. Box 826, Bensalem, PA 19020

(267) 223-1030 Toll free (800) 437-0557 Fax (215) 245-8704 sales@spectrimbp.com w w w . s p e c t r i m b p . c o m

M O L D I N G S w w w . s p e c t r i m b p . c o m

Step 1: Cut to length with a powered miter box saw with a carbide tip blade.

Step 2: Measure and mark the height.

Step 3: Install with an 18 gauge nail gun along with panel adhesive or pre-drilled trim screws.

Step 4: Holes are filled with a matching color wax putty fill stick.

TECH DATA

SpecTrim® products are designed for use in commercial, institutional, retail, hospitality, and residential interiors.

MATERIALS

Product Description:

A. SpecTrim® Molding and Wainscot are pre-finished wood moldings that have a decorative protective film surface, up to16 mil thick. The decorative PVC surface film is factory applied with adhesive, heat, and pressure to a shaped MDF (medium density fiberboard) core.

B. SpecTrim® shall provide wax putty fill sticks to match each specified finish for installation touch-up and fill.

Product Types:

Moldings: Specify model number, finish code, and length of each profile. All items will be manufactured 10’ long, except casing which is 8’ long, u.n.o.

Smoke and Flame:

All standard SpecTrim® products are produced with a flame spread index (FSI) of 100 (Class III) and a smoke developed index (SDI) of 330, according to the ASTM-E84 (NFPA 255, ANSI/UL723, and UBC 8-1) smoke and flame development test.

PVC film is a self-extinguishing Class A material, 16 mil thick, when applied to a non-combustible surface.

MDF may be treated to obtain a Class A fire rating, when required by code and where quantities will allow. Consult your SpecTrim representative for minimum quantity requirements.

DELIVERY, STORAGE, AND HANDLING

A. SpecTrim® is delivered on pallets, corner guarded and cardboard protected, shrink-wrapped, and affixed to a pallet to avoid separa-tion during shipping.

B. Product shall be stored in a dry, temperature controlled, indoor area that maintains a temperature between 65 - 80 degrees Fahrenheit and a relative humidity between 25-55%.

Products are to be placed in the installation area no less than 48 hours prior to installation to adjust to environmental conditions.

INSTALLATION

A. Inspect SpecTrim® Molding products prior to installing each length. Do not install defective or damaged lengths. Install SpecTrim molding products in accordance with manufacturer’s installation instructions available from www.spectrimbp.com.

B. Cut SpecTrim® Moldings using a power radial saw with a sharpened carbide tipped, 64 tooth triple-chip blade. Cut miter, scarf, butt joints, etc. according with the standards of the Architectural Woodwork Institute (AWI) and as field conditions require.

C. Install SpecTrim® using a suitable panel adhesive and an 18 gauge power nail gun to hold molding in place. When conditions do not permit nailing, pre-drill and counter-bore trim screws to attach to wall framing.

D. Finished ends usually self return miter to the wall. If a self return is cut square, exposing the raw MDF. The exposed end may also be laminated with the PVC film in the field.

The finished PVC is furnished upon request.

The Mitered finished ends that are in high traffic areas may eventually wear and get damaged at the point of the miter. If this is a concern, SpecTrim® offers a 2” x 3/4” Ven4ma® molded finished end trim covered in the matching finish to protect the finished end of the base and chair rail molding.

E. Mitered outside corners that are in high traffic areas may eventually wear and get damaged at the point of the miter. If this is a concern, SpecTrim® offers a 2”x 2” Ven4ma® molded corner trim covered in the matching finish to protect the outside corner of the base and chair rail molding.

F. Caulking—use non-marking masking tape along both sides of a colored caulk joint to create a clean narrow bead.

G. Fill all exposed nail holes with matching color wax putty, provided with each order.

Wipe off excess wax putty with a clean rag and Naptha solvent.

H. Do not sand or apply any other finish to SpecTrim® Molding and Wainscot.

CLEANING

A. SpecTrim® molding is extremely resistant to staining and is easy to clean. To remove stains start with a mild cleaning agent such as warm soapy water or dishwashing detergent.

Alternatively, standard household cleaners such as Windex, Pine-sol, or rubbing alcohol will remove most stains without affecting the texture or appearance of the surface.

B. It is not recommended using highly concen-trated solvent based chemicals such as gasoline, acetone, M.E.K., ethyl acetate or toluene.

However, if applied with a cloth in very small quantities and quickly wiped away, these solvents have proven safe and effective in removing the most difficult stains such as permanent ink.

It is strongly recommended that a test area be cleaned prior to using such strong solvents in highly visible areas. (Do not use abrasive cleaners.)

C. Clean dirt from surface of installed products using mild soap and water.

WARRANTY

A. When properly installed by a skilled carpenter, SpecTrim® products are warranted three years from the date of installation against de-lamination. Finishes are warranted against color fade for a period of 5 years.

B. Warranty claims must be accompanied by proof of purchase, as well as details regarding the nature of the problem, location of the molding, etc.

C. This warranty does not include any conditions or damages resulting from accidents, alterations, misuse, abuse, motorized devices, or failure to follow our instructions with respect to measure-ment, installation, cleaning or maintenance.

This warranty also does not cover any condition or damage resulting from removal and/or reinstallation of the moldings. This warranty also does not apply to conditions caused by normal wear and tear upon the product.

PRODUCT DESCRIPTION

SpecTrim® is a pre-finished molding that has a decorative and protective PVC film surface. The finish is 12 to 16 mil thick and factory applied with adhesive, heat, and pressure to a medium density fiberboard core that has been shaped into the molding profile.

The PVC veneer equals and often surpasses the beauty of real wood and offers color consistency that cannot be achieved with wood finishes.

SpecTrim® also costs far less than real wood finished moldings. There are no knots, sap-streaks, or splits like those found in lumber, so the yield is much greater, for additional cost savings.

Some of our wood finishes cannot be produced in solid wood or would be very cost prohibitive as real wood moldings. With SpecTrim®, you get the look you want, plus durable, easy-to-install, maintenance-free moldings that won’t split, shrink, mildew, or discolor.

SpecTrim® is also environmentally friendly. It is made with MDF, (reconstituted saw dust), that would have otherwise been used as land fill, and PVC that is 100% recyclable.

And best of all, no timber is harvested and no forests are destroyed.

25 PROFILES 15 FINISHES

Traditional

APPLICATIONS

SpecTrim® standard molding designs have been selected to offer versatility in size and shape, to be used in various design applications depending on the scale of the area to be trimmed. As conventional wall molding, SpecTrim® comes as a Crown, Chair Rail, Base, Casing, and Panel Molding. It can also be used to trim store fixtures, partitions, cabinetry, etc., and coordinate with various other laminate and wood finishes. Our PVC veneers are also thermal-foils that can be thermally formed onto shaped MDF panels to create matching panel and door components.

Perfect for Hospitality, Health Care, and Food Service where durability and easy cleaning are important.

SpecTrim® is also perfect for all Commercial, Multi-Family, and Residential areas as well.

ORDERING

SpecTrim® Moldings may be ordered in any combination of our fifteen standard PVC veneers, including exotic woods such as Anigre and Bird’s Eye Maple. Then select from our 25 standard profiles, offered in both traditional and contemporary styling.

Stock sizes are mostly 10’ lengths except for casing, which is usually stocked 8’. Some items are stocked 8’, 10’ and 12’ and also may be produced in these sizes. Consult you SpecTrim® Representative for availability and quantity requirements.

CUSTOMIZING

Shapes

Custom profiles can easily be created for similar cost savings over real wood, provided a minimum order of 3,000 linear feet is produced. Smaller quanti-ties may be acceptable for a set-up fee and we welcome your inquiries.

Finishes

There are hundreds of PVC finishes available in our library. If you need a non-standard finish, where quantities permit, simply send us a sample or give us a laminate number, etc. to attempt a match or a close compliment to the finish you are looking for.

THE ENVIRONMENT

• SpecTrim® PVC veneer saves on the use of wood and so it saves our forests, which reduces global warming.

• Polymers use lower energy in production and transportation than consumed by wood products.

• SpecTrim® recycles all waste from the unused material of our PVC veneers.

INSTALLING

SpecTrim® Moldings are installed much the same as other ornamental wood molding. For best results, SpecTrim® should be placed in the installation area 48 hours prior to installing to adjust to the climate of the room. Cut molding as required using a powered miter box saw with a sharp carbide 64-tooth triple chip blade. Attach with panel adhesive and an 18-gauge nail gun, or pre-drill and counter bore for narrow head trim screws. Touch-up with our matching wax putty fill sticks, provided free with every order.

Protect molding ends and corners with Ven4ma molded end and corner caps.

CLEANING

SpecTrim® Moldings can withstand cleaning with most liquid solvents.

Denatured alcohol or mild soap and warm water works best for most stains. Never use abrasive or powdered cleaners. Small stains may be spot cleaned using small amounts of concentrated solvent chemicals, such as acetone, M.E.K., gasoline, ethyl acetate, gasoline, or toluene.

33 Whitewood

31 Brazilwood

32 Driftwood

13 Maple

04 Medium Bird’s Eye Maple

02 Natural Anigre

16 Natural Oak

17 Natural Cherry

34 Pearwood

07 Medium Cherry

21B Antique White

08 Honduras Mahogany

19 Wenge

18 Windsor Mahogany

09 Walnut

TCC-213

Crown (extra large) 1 3/16”x 8 3/4”

TCC-212

Crown (large) 1 1/8”x 7 1/4”

TCC-211

Crown (medium) 3/4”x 4 5/8”

TCC-210

Crown (small) 3/4”x 3 3/4”

TCR-311

Chair Rail (medium) 3/4”x 3 1/2”

TCR-310

Chair Rail (small) 3/4”x 2 1/2”

TCB-412

Base (large) 3/4”x 7 1/2”

TCB-411

Base (medium) 3/4”x 5 1/2”

TCB-410

Base (small) 3/4”x 3 1/2”

TCP-610

Panel Molding 9/16”x 1 5/8”

TCQ-710

Quarter Round 5/8”x 3/4” Note: Custom profiles are available upon request.

Visit our website to view full size profiles.

TCS-511

Casing (large) 1”x 3 3/4”

TCS-510

Casing (small) 1”x 2 1/2”

TCC-253

Crown (extra large) 1 7/16”x 7 1/8”

TCC-252

Crown (large) 1 1/8”x 6 3/8”

TCC-251

Crown (medium) 1 1/8”x 5 13/16”

TCC-250

Crown (small) 3/4”x 2 3/8”

TCR-351

Chair Rail (medium) 3/4”x 5”

TCR-350

Chair Rail (small) 1/2”x 3”

TCB-452

Base (large) 3/4”x 6”

TCB-451

Base (medium) 3/4”x 4”

TCB-450

Base (small) 3/4”x 3”

TCP-650

Panel Molding 1/2”x 1 1/2”

TCS-551

Casing (large) 1”x 4”

TCS-550

Casing (small) 1”x 3 1/8”

Contemporary

• Pre-finished—No Sanding, Staining, or Painting

• Saves Money

• Reduced Waste—No Knots, Splits, or Sap Streaks

• Realistic and Exotic Wood-grains at a Fraction of the Cost

• Easy to install

• Durable and impact resistant

• Withstands cleaning solvents

• Environmentally Friendly— Saves Trees w w w . s p e c t r i m b p . c o m vhawaspejoa1 Cloudy vhawaspejoa1 Cloudy vhawaspejoa1 Polygon vhawaspejoa1 Text Box

WALL BASE

vhawaspejoa1 Text Box

TOP TRIM

vhawaspejoa1 Polygon vhawaspejoa1 Text Box

PANEL

vhawaspejoa1 Text Box

TOP & BASE TRIM

dimensional data www.focalpointlights.com | 1.773.247.9494

Visit focalpointlights.com for complete photometric data.

ja nu ar y

C luna ® 2x2 features 2'x2' recessed indirect with perforated center basket.

Reflector and end caps form seamless one-piece housing.

High reflectance, low gloss Matte White finish controls glare and provides high efficiency.

Perforated shield hinges open for quick and easy relamping.

Optional radial blade louver offers a distinct look that highlights interior architecture.

All luminaire combinations may be continuously row mounted.

Luna® provides high angle uniform distribution ideal for general illumination.

shielding options & details performance

2–Lamp 40W Biax

70% Efficiency

1598 cd @ 5°

Covered by the following U.S. Patents: D395,727; D397,819.

T8 U–BEND LAMPS

24.00" 609.6mm

5.

7.

0m m

BIAX LAMPS

T5/T5HO LAMPS

lamping options

T8 LAMPS

Overall height for ST luminaire is 5.50" radial blade louver perforated

F oc al P oi nt

L L

C

S

P ul as ki

R d, C hi ca go

IL

T

3.

7.

| F

3.

7.

in fo fo ca lp oi nt lig ht s.

co m w w w .f oc al po in tl ig ht s.

co m

F oc al P oi nt

L L

C r es er ve s th e ri gh t to c ha ng e sp ec if ic at io ns f or p ro du ct i m pr ov em en t w it ho ut n ot if ic at io n.

mounting information recessed fixture:

project:

specifications construction One-piece 20 Ga. steel reflector and housing.

20 Ga. steel ends form finished housing.

Lamps are shielded by detachable 22 Ga. steel perforated lamp shield with acrylic lens insert.

Lamp shield is secured by four spring–pins allowing shield to hinge down for relamping.

Optional radial blade louver: .75"H x 1" frequency fabricated of 20 Ga. steel with acrylic lens insert.

Top access 20 Ga. steel ballast compartment.

Weight: 20 lbs optic One-piece 20 Ga. steel reflectors finished in Matte Satin White powder coat.

electrical Electronic ballasts are thermally protected and have a Class “P” rating.

Optional dimming ballasts available.

Consult factory for dimming specifications and availability.

UL and cUL listed.

finish Polyester powder coat applied over a 5-stage pre–treatment.

* for more information see Reference section.

specify “G” for flat 9/16" and 15/16" tee or “ST” for 9/16" slot tee grid types.

grid

“G” flat tee “ST” slot tee specify “DF” Drywall Frame Kit for drywall ceiling conditions.

drywall frame kit

Use tie–wire or screws to secure frame kit.

cut out dimensions:

2': Min: 24.25" Max: 24.563"

Luminaires may be installed in T-bar ceiling systems up to 1 11/16" high".

Overall height for ST luminaire is 5.50".

ordering luminaire series FLU Luna FLU nominal size 22 2' x 2' 22 distribution B Bi-Directional B lamp quantity Two Lamp 2

Three Lamp 3 lamp type 40 Watt Biax BX40

50 Watt Biax BX50

55 Watt Biax BX55

F31/T8U T831 (two lamp only)

T8 T8 (1 11/16" maximum grid height)

T5 T5

T5HO T5HO

ballast Electronic Instant Start <20% THD E

(BX40 & T8 only)

Electronic Program Start <10% THD S

Electronic Dimming Ballast* D voltage 120 Volt 120

277 Volt 277

347 Volt 347 mounting Grid G

Slot Tee ST

Surface Mount SM shielding Perforated Shield PS

Radial Blade Louver RLP factory options Air Return AR

Chicago Plenum CP

Dust Cover DC

Drywall Frame Kit DF (Cut out dimensions:

Min:24.25"/Max: 24.563")

Emergency Battery Pack* EM

Earthquake Clip EQ

HLR/GLR Fuse FU

Flex Whip* FW

Include 3000K Lamp* L830

Include 3500K Lamp* L835

Include 4100K Lamp* L841

Separate Circuit* SC

Separate Circuit Tandem* SCT

Labor Saving Master Satellite* LS

Ballast Saving Tandem* BST

Lutron™ Sensor Feed* SF (EcoSystem ballast required) finish WH vhawaspejoa1 Cloudy luna® 2x2

N um be rs i nd ic at e pe rc en ta ge v al ue s of

Floor Ceiling

Wall

RCR 0

80 70 50 30 10 00 70 50 30 10 70 50 10 50 10 50 10 50 10 00

83 83 83 83 81 81 81 78 78 75 75 72 72 70

77 74 71 69 75 73 68 70 66 67 64 64 62 61

71 66 61 57 69 64 57 62 56 60 54 58 53 52

65 58 53 49 63 57 48 55 47 53 47 51 46 44

60 52 46 42 58 51 41 49 41 48 40 46 40 38

54 46 40 35 53 45 35 44 35 42 34 41 34 32

50 41 35 30 49 40 30 39 30 38 30 37 30 28

46 37 31 26 45 36 26 35 26 34 26 33 26 24

42 33 27 23 41 32 23 31 23 31 23 30 22 21

39 29 24 20 38 29 20 28 20 27 19 27 19 18

180° 170° 160° 150° 140°

0° 10° 20° 30° 40°

0° 45°

90°

0° 45°

90°

130°

120°

110°

100°

90°

80°

70°

60°

50°

Spacing 1.2

Criterion: 1.3

CANDLEPOWER DISTRIBUTION

CO–EFFICIENTS OF UTILIZATION

LUMINANCE DATA (CD/M2)LUMEN SUMMARY

Filename: FLU222BX40PS.IES

Catalog #: FLU-22-B-2-BX40-E-120-G-PS-WH

Efficiency: 70%

Test #: 11020.0

0°

5°

15°

25°

35°

45°

55°

65°

75°

85°

90°

95°

105°

115°

125°

135°

145°

155°

165°

175°

180°

1595 1595 1595 1595 1595

1581 1583 1583 1596 1598 152

1505 1515 1521 1543 1550 433

1370 1386 1416 1451 1467 656

1184 1209 1262 1320 1341 794

944 981 1065 1140 1172 822

676 731 837 913 940 738

408 477 570 587 592 530

183 224 230 259 271 249

29 34 44 43 48 44

0 0 0 0 0

0 0 0 0 0 0

0 0 0 0 0 0

0 0 0 0 0 0

0 0 0 0 0 0

0 0 0 0 0 0

0 0 0 0 0 0

0 0 0 0 0 0

0 0 0 0 0 0

0 0 0 0 0 0

0 0 0 0 0

Vertical Horizontal Angle Zonal Angle 0° 22.5° 45° 67.5° 90° Lumens

1241 19.7 28.1

2034 32.3 46.1

3594 57.0 81.4

4415 70.1 100.0

4415 70 100.0 Total

Luminaire

Zone Lumens Lamp Fixt

0°-30°

0°-40°

0°-60°

0°-90°

0°-180°

3924 4427 4872

3464 4289 4817

2838 3965 4118

2078 2612 3078

978 1484 1619

Vertical Angle 0° 45° 90°

45°

55°

65°

75°

85°

Go to www.focalpointlights.com for additional photometric data.

Wainscot Paneling Wainscot Paneling is our modular system that enhances the look of any room.

SpecTrim Wainscot is a pre-finished system of trims and panels that provide the rich and warm look of real wood with all the advantages of superior millwork. Our popular wainscoting features a durable film veneer finish that protects the beauty of our classic designs.

Smooth and free from defects, our wainscoting installs easily and won’t split or mildew. And what’s more, it won’t shrink like wood, so joints stay tight throughout the seasonal temperature changes. You can chose from 6 finishes and three panel styles. Although custom heights can be ordered, most SpecTrim®

Wainscot is made for a standard height of 36”. SpecTrim® Wainscot panels install with tongue and groove components that hide most of the fastening.

Wainscot System moldings are stocked in 6 standard finishes. We offer our other standard finishes when projects exceed 1,000 linear feet for each molded part.

Consult your Spectrim Representative to discuss your needs when you would like to use our other standard or non-standard finishes for our wainscot system.

Coordinate our Wainscot with the 25 prefinished molding profiles available from our

SpecTrim Moldings product line.

Warranty

When properly installed SpecTrim Wainscot products are warranted no less than 5 years from the date of installation against self de-lamination. Surface finishes are warranted against color fade for a period of 5 years.

Panel Types City Flat Panel

Our PVC veneers are laminated to an MDF flat panel, which provides a smooth and attractive recessed appearance. The 1/4” Flat Panels are shipped in 48” widths and precut to the perfect height (usually 23

5/8" if you need a 36" overall finished wainscot height). Cut the width in the field to suit your stile spacing and slide the 1/4” panels into the grooves provided in the stiles and rails.

21 Antique White

13 Maple

16 Oak

07 Medium Cherry

08 Honduras Mahogany

18 Windsor Mahogany

WainscotStandard Finishes

Wainscot

Info Wainscot Installation Instructions (.pdf)

MS35 Adhesive Instructions (.pdf)

75AM Adhesive Instructions (.pdf)

Wainscot System Drawings (.dwg)

Wainscot System Drawings (.pdf)

Spectrim Wainscot Brochure (.pdf)

Ven4ma & Film Technical Data (.pdf)

Molding Spec 06455 (.doc)

Molding Spec 06455 (.pdf)

Film ASTM E84 Test (.pdf)

MSDS Ven4ma & Film (.pdf)

MSDS MS35 Adhesive (.pdf)

HOME ABOUT SERVICES PRODUCTS CUSTOM GALLERY CONTACTS

Page 1 of 2Spectrim Wainscot

10/16/2013htt ://www.s ectrimb .com/index. h / roducts/wainscot vhawaspejoa1 Rectangle vhawaspejoa1 Polygon vhawaspejoa1 Text Box

PANEL

vhawaspejoa1 Text Box

TOP & BASE TRIM

Country Beaded Panel

Our PVC veneers are thermally formed on an MDF beadboard panel, providing a beautiful beaded detail. Beaded panels are shipped in 48” lengths and precut to the perfect height (usually 23 5/8" if you need a

36" overall finished wainscot height). For a continuous Country look, butt panels together or cut to suit your stile spacing. Simply slip the

1/4” beaded panels into the grooves provided in the stiles and rails.

This process alleviates numerous beaded planks, saving you time and money during installation.

Classic Raised Panel

Traditional raised panels use our PVC veneers thermally formed onto a 5/8" MDF core, providing a beautiful raised edge detail. Panels a numbered and specially sized from wall and outlet measurements to slip into concealed grooves and float between the stiles without fastening. Raised panels are specially made to to provide you with a stable raised panel without glue joints, but maintain the rich appearance of solid wood.

MSDS 75AM Adhesive (.pdf)

Cleaning and Patching (.pdf)

SpecTrim Building Products, LLC © 2013

Page 2 of 2Spectrim Wainscot

10/16/2013htt ://www.s ectrimb .com/index. h / roducts/wainscot

Pr e-fin is he d

N o

Sa nd in g, St ai ni ng

,o r

Pa in tin g

Sa ve s

M on ey

Re du ce d W as te

N o Kn ot s, Sp lit s, or

S ap

S tr ea ks

Re al is tic a nd E xo tic

W oo dg ra in s at a F ra ct io n of t he C os t

Ea sy t o in st al l

D ur ab le a nd im pa ct si st an t

W ith st an ds c le an in g so lv en ts

En vi ro nm en ta lly

F rie nd ly

Sa ve s

Tr ee s

PR

O

D U

CT

D

ES

CR

IP

TI

O N

Sp ec

Tr im

W ai n sc ot is m ad e w it h a n as so rt m en t of pr e-fi n is h ed m ol di n gs th at h av e th e sa m e de co ra ti ve a n d pr ot ec ti ve P

V C f ilm v en ee r su rf ac e u se d on

S p ec Tr im

M ol di n g.

T h e

P V

C v en ee r eq u al s an d of te n su rp as se s th e be au ty o f re al w o o an o ff er s co lo r co n si st en cy t h ca n ot b e ac hi ev ed w it h w oo d fi n is he s.

Sp ec

Tr im

W ai n sc ot a ls o co st s fa r le ss th an r ea l w oo d w ai n sc ot

.T h er e ar e n o de fe ct s, lik e th os e fo u n d in s ol id lu m be r, sa vi n g w as te w h ile p ro vi di n g a co n si st en t fi n is h

Sp ec

Tr im is a ls o en vi ro n m en ta lly fr ie n d ly

It is m ad e w it h M

D F fr om w oo d pa rt ic le s, th at w ou ld h av e ot h er w is e be en u se d as la n d fi ll, an d P

V C t h at is r ec yc la bl e.

B es t of al l, n o ti m be r is h ar ve st ed a n d n o fo re st s ar e de st ro ye d.

A

PP

LI

CA

TI

O

N S

Sp ec

Tr im

W ai n sc ot is p er fe ct f or H os pi ta lit y, H ea lt h C ar e, H ig h er

E du ca ti on ,a n d

Fo od

S er vi ce w h er e du ra bi lit y an d ea sy c le an in g ar e im p or ta n t.

Sp ec

Tr im

W ai n sc o t is al so a n a tt ra ct iv e an d e co n om ic al w al l fi n is h f o r

C o m m er ci al

M u lt i-

F am il y, an d

R es id en ti al ea s as w el l.

O

RD

ER

IN

G

Sp ec

Tr im

W ai n sc ot m ay b e or de re d in s ta n da rd fi n is h es al th ou gh th e pa n el s m ay be or de re d in a ny o f th e s ta n da rd S p ec

Tr im

M ol di n g fi n is h es

N ex t, se le ct f ro m o u r at tr ac ti ve p an el s ty le s.

H or iz on ta l c om p on en ts a re s h ip p ed in

’l en gt h s an d co rn er

/e n d tr im s ar e sh ip p ed in

0’ le n gt h s.

V er ti ca l s ti le s ar e pr e-cu t an d in cl u de m or ti se a n d te n on ed e n ds f or t h e st an da rd

6” h ig h sy st em on ly

W h en o rd er in g fo r a cu st om h ei gh t an d up pe r pa n el in g th at ex te n ds t o th e ce ili n g, th e en d an d ce n te r st ile s ar e sh ip p ed in

0’ u n cu t le n gt h s.

C u st om f in is h es a re o n ly av ai la bl e fo r la rg e qu an ti ty r eq u ir e-m en ts

C on su lt y ou r

Sp ec

Tr im

R ep re se n ta ti ve f or p ri ci n g an d re qu ir em en ts

W ai ns co t P ro fi le s ca n be v ie w ed a nd pr in te d fu ll si ze a t w w .s pe ct ri m bp .c om

CL

EA

N

IN

G

Sp ec

Tr im

W ai n sc ot c an w it h st an d cl ea n in g w it h m os t liq u id s ol ve n ts

D en at u re d al co h ol o r m ild s oa p an d w ar m w at er w or ks b es t fo r m os t st ai n s.

N ev er u se a br as iv e or p ow de re d cl ea n er s.

Sm al l s ta in s m ay b e sp ot cl ea n ed u si n g sm al l a m ou n ts o f co n ce n tr at ed s ol ve n t ch em ic al s, su ch a s ac et on e, M .E

.K ga so lin e, et hy l a ce ta te ga so lin e, or to lu en e.

IN

ST

A

LL

IN

G

Sp ec

Tr im

W ai n sc ot is in st al le d m u ch th e sa m e as o rn am en ta l w oo d m ol d-in g.

Fo r be st r es u lt s, Sp ec Tr im sh ou ld b e pl ac ed in t h e in st al la ti on ar ea h ou rs p ri or t o in st al lin g to ad ju st t o th e cl im at e of th e ro om

.C u t w ai n sc ot m ol di n g co m p on en ts a s re qu ir ed u si n g a p ow er ed m it er b ox sa w w it h a s h ar p

-t oo th t ri pl e ch ip ca rb id e bl ad e.

A tt ac h w it h p an el ad h es iv e an d an

8-ga u ge n ai l g u n or p re

-d ri ll an d co u n te r bo re f or ro w h ea d tr im s cr ew s.

To u ch -u p w it h o u r m at ch in g w ax p u tt y fi ll st ic ks ,p ro vi de d fr ee w it h e ve ry o rd er

W A

IN

S

C O

T

W ai n sc o t

P an el s h av e th e p ow er t o en h an ce t h e lo o k o f an y ro o m .T h e

Sp ec

Tr im p re -f in is h ed s ys te m o f pa n el s pr ov id e th e ri ch a n d w ar m lo ok of re al w oo d w it h al l t he g re at p ra ct ic al ad va n ta ge s of su p er io r m ill w or k.

O u r p op u la r w ai n sc ot in g fe at u re s a du ra bl e

P V

C fi lm s u rf ac e th at p ro te ct s th e be au ty o f ou r cl as si c de si gn s.

Sm oo th an d f re e fr om d ef ec ts ,o u r w ai n sc ot in g in st al ls e as il y an d w o n’ t sp li t o r m il d ew

A n d w h at ’s m o re ,i t w o n’ t sh ri n k lik e w oo d s o jo in ts s ta y ti gh t th ro u gh ou t th e se as on al t em p er at u re ch an ge s.

Yo u c an c h os e fr om f in is h es an d t h re e p ra ct ic al p an el s ty le s.

A lt h o u gh cu st o m h ei gh ts c an b e or de re d

,S p ec Tr im

W ai n sc ot is m ad e av ai la bl e at a s ta n d ar d h ei gh t of

Sp ec

Tr im

W ai n sc ot p an el s in st al l ea si ly w it h t on gu e an d g ro ov e co m p o-n en ts a n d h id de n f as te n in g.

C oo rd in at e w ai n sc ot w it h t h e p re fi n is h ed m ol d in g pr of ile s av ai la bl e fr om ou r

Sp ec

Tr im

M ol d in gs w w w s p e c t r i m b p c o m

Sp ec tr im

B u ild in g P ro d u ct s, LL

C P.

O

Bo x

6, B en sa le m

PA

(2

3-

To ll fr ee

0)

-0

Fa x (2

5-sa le s@ sp ec tr im bp

.c om w s p e c t r i m b p c o m

Le ve l y ou r ba se ,s lid e st ile s in to g ro ov es

Sl id e pa ne ls in fr om t he t op

A pp ly t op r ai l a nd r ai l c ap

Fi ni sh ed in st al la ti on

TE

CH

D

AT

A Sp ec Tr im

W ai n sc ot p ro du ct s ar e de si gn ed f or u se in co m m er ci al ,i n st it ut io n al ,r et ai l, ho sp it al it y, fo od s er vi ce an d re si de n ti al a pp lic at io n s.

M

AT

ER

IA

LS

P ro d u ct D es cr ip ti on

A

Sp ec

Tr im

M ol di n g an d

W ai n sc ot a re p re -f in is h ed w oo d m ol di n gs t h at h av e a de co ra ti ve a n d pr ot ec ti ve fi lm s u rf ac e, t o1 m il th ic k.

T h e de co ra ti ve

P V

C su rf ac e fi lm is f ac to ry a pp lie d w it h a dh es iv e, h ea t, an d pr es su re t o an

M D

F (m ed iu m d en si ty f ib er bo ar

d) c or e th at h as b ee n m ol de d in to t h e sp ec if ie d sh ap e.

B

Su bs tr at e sh al l b e Sy n er gi te

M ed iu m

D en si ty

Fi be…