Work Narrative_R1 - 523A5-24-010 - Expansion Joint Corrections.pdf
PDF 11 MB Posted
- Attached to
- Z1DZ--523A5-24-010 Expansion Joint Corrections
- Solicitation number
- 36C24124B0053
About this file
This document appears to be a Work Narrative for project 523A5-24-010 Expansion Joint Corrections at the VA Medical Center in Brockton, Massachusetts. The related federal contract opportunity is solicitation number 36C24124B0053 issued by the Department of Veterans Affairs Veterans Health Administration Veterans Integrated Service Network 1. The solicitation is an invitation for bid for the project to perform expansion joint corrections at the medical center. The document provides details on the scope of work, which includes repairing expansion joints in concrete slabs and walls, as well as applying sealants, caulks, and coatings. The project is expected to begin in 2024. No specific pricing terms, set asides, or award dates are provided in this document.
View the file
Other files
Show all 24
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Expansion Joint #1:
1. Saw cut with a fine diamond tip blade along each edge of the existing aluminum expansion joint
2. Demo Out the cut tile and any damaged concrete underneath
3. Prepare the surface for installation of quick set epoxy expansion joint products
4. Install the complete epoxy expansion product:
o Place a 3/8” backer rod o Install a quick set epoxy repair compound making it level with the tiles surrounding it o Make a cut above the backer rod and inject a rubberized epoxy into the saw cut
Expansion Joint #2:
2. Demo Out the cut tile and any damaged concrete underneath
3. Prepare the surface for installation of quick set epoxy expansion joint products
4. Install the complete epoxy expansion product:
o Place a 3/8” backer rod o Install a quick set epoxy repair compound making it level with the tiles
Expansion Joint #3:
2. Demo Out the cut tile and any damaged concrete underneath
3. Prepare the surface for installation of quick set epoxy expansion joint products
4. Install the complete epoxy expansion product:
o Place a 3/8” backer rod o Install a quick set epoxy repair compound making it level with the tiles surrounding it o Make a cut above the backer rod and inject a rubberized epoxy into the saw cut
5. Install a cover over the exposed expansion joint, that match the existing joint covers, along the walls with the metal stock holding the crash rail, typically located under the windows.
6. Remove and replace approximately 3 SF of damaged tiles adjacent to the expansion joint.
Prepare subfloor as necessary to install new tiles. The tile color is Nurazzo DC-1815, the grout color is Latricrete Bright White.
Expansion Joint #4:
2. Demo Out the cut tile and any damaged concrete underneath
3. Prepare the surface for installation of quick set epoxy expansion joint products
4. Install the complete epoxy expansion product:
o Place a 3/8” backer rod o Install a quick set epoxy repair compound making it level with the tiles surrounding it o Make a cut above the backer rod and inject a rubberized epoxy into the saw cut
5. Install a cover over the exposed expansion joint, that match the existing joint covers, along the walls with the metal stock holding the crash rail, typically located under the windows.
Expansion Joint #5:
2. Demo Out the cut tile and any damaged concrete underneath
3. Prepare the surface for installation of quick set epoxy expansion joint products
4. Install the complete epoxy expansion product:
o Place a 3/8” backer rod o Install a quick set epoxy repair compound making it level with the tiles
Expansion Joint #6
2. Demo Out the cut tile and any damaged concrete underneath
3. Prepare the surface for installation of quick set epoxy expansion joint products
4. Install the complete epoxy expansion product:
o Place a 3/8” backer rod o Install a quick set epoxy repair compound making it level with the tiles surrounding it o Make a cut above the backer rod and inject a rubberized epoxy into the saw cut
5. Install a cover over the exposed expansion joint, that match the existing joint covers, along the walls with the metal stock holding the crash rail, typically located under the windows.
6. Remove and replace approximately 6 SF of damaged tiles adjacent to the expansion joint.
Prepare subfloor as necessary to install new tiles. The tile color is Nurazzo DC-1285, the grout color is Laticrete Sauterne.
Expansion Joint #7:
2. Demo Out the cut tile and any damaged concrete underneath
3. Prepare the surface for installation of quick set epoxy expansion joint products
4. Install the complete epoxy expansion product:
o Place a 3/8” backer rod o Install a quick set epoxy repair compound making it level with the tiles surrounding it o Make a cut above the backer rod and inject a rubberized epoxy into the saw cut
5. Install a cover over the exposed expansion joint, that match the existing joint covers, along the walls with the metal stock holding the crash rail, typically located under the windows.
6. Remove and replace approximately 4 SF of damaged tiles adjacent to the expansion joint.
Expansion Joint #8:
2. Demo Out the cut tile and any damaged concrete underneath
3. Prepare the surface for installation of quick set epoxy expansion joint products
4. Install the complete epoxy expansion product:
o Place a 3/8” backer rod o Install a quick set epoxy repair compound making it level with the tiles
Expansion Joint #9:
2. Demo Out the cut tile and any damaged concrete underneath
3. Prepare the surface for installation of quick set epoxy expansion joint products
4. Install the complete epoxy expansion product:
o Place a 3/8” backer rod o Install a quick set epoxy repair compound making it level with the tiles surrounding it o Make a cut above the backer rod and inject a rubberized epoxy into the saw cut
Expansion Joint #10:
1. Saw cut with a fine diamond tip blade along the joint of the small tile on the south side of the expansion joint, mirror this cut on the north side so that the finished expansion will be symmetrical.
2. Demo Out the cut tile and any damaged concrete underneath
3. Prepare the surface for installation of quick set epoxy expansion joint products
4. Install the complete epoxy expansion product:
o Place a 3/8” backer rod o Install a quick set epoxy repair compound making it level with the tiles surrounding it o Make a cut above the backer rod and inject a rubberized epoxy into the saw cut
Expansion Joint #11:
2. Demo Out the cut tile and any damaged concrete underneath
3. Prepare the surface for installation of quick set epoxy expansion joint products
4. Install the complete epoxy expansion product:
o Place a 3/8” backer rod o Install a quick set epoxy repair compound making it level with the tiles surrounding it o Make a cut above the backer rod and inject a rubberized epoxy into the saw cut
5. Install a cover over the exposed expansion joint, that match the existing joint covers, along the walls with the metal stock holding the crash rail, typically located under the windows.
6. Remove and replace approximately 1 SF of damaged tiles adjacent to the expansion joint.
Expansion Joint #12:
1. Prepare the surface for installation of quick set epoxy expansion joint products expansion joint cannot restrict operations of the door.
2. Install the complete epoxy expansion product:
o Place a 3/8” backer rod o Install a quick set epoxy repair compound making it level with the tiles
Expansion Joint #13:
2. Demo Out the cut tile and any damaged concrete underneath
3. Prepare the surface for installation of quick set epoxy expansion joint products
4. Install the complete epoxy expansion product:
o Place a 3/8” backer rod o Install a quick set epoxy repair compound making it level with the tiles surrounding it o Make a cut above the backer rod and inject a rubberized epoxy into the saw cut
Expansion Joint #14:
2. Demo Out the cut tile and any damaged concrete underneath
3. Prepare the surface for installation of quick set epoxy expansion joint products
4. Install the complete epoxy expansion product:
o Place a 3/8” backer rod o Install a quick set epoxy repair compound making it level with the tiles surrounding it o Make a cut above the backer rod and inject a rubberized epoxy into the saw cut
5. Install a cover over the exposed expansion joint, that match the existing joint covers, along the walls with the metal stock holding the crash rail, typically located under the windows.
6. Remove and replace approximately 5 SF of damaged tiles adjacent to the expansion joint.
Expansion Joint #15:
symmetrical.
2. Demo Out the cut tile and any damaged concrete underneath
3. Prepare the surface for installation of quick set epoxy expansion joint products
4. Install the complete epoxy expansion product:
o Place a 3/8” backer rod o Install a quick set epoxy repair compound making it level with the tiles surrounding it
Expansion Joint #16a:
1. Saw cut with a fine diamond tip blade along the joint of the small tile on the south side of the expansion joint, mirror this cut on the north side so that the finished expansion will be symmetrical.
2. Demo Out the cut tile and any damaged concrete underneath
3. Prepare the surface for installation of quick set epoxy expansion joint products
4. Install the complete epoxy expansion product:
o Place a 3/8” backer rod
Expansion Joint #16b:
1. Prepare the surface for installation of quick set epoxy expansion joint products, expansion joint cannot restrict operations of the door.
2. Install the complete epoxy expansion product:
o Place a 3/8” backer rod
Expansion Joint #17:
2. Demo Out the cut tile and any damaged concrete underneath
3. Prepare the surface for installation of quick set epoxy expansion joint products
4. Install the complete epoxy expansion product:
o Place a 3/8” backer rod o Install a quick set epoxy repair compound making it level with the tiles surrounding it o Make a cut above the backer rod and inject a rubberized epoxy into the saw cut
Expansion Joint #18:
2. Demo Out the cut tile and any damaged concrete underneath
3. Prepare the surface for installation of quick set epoxy expansion joint products
4. Install the complete epoxy expansion product:
o Place a 3/8” backer rod o Install a quick set epoxy repair compound making it level with the tiles surrounding it o Make a cut above the backer rod and inject a rubberized epoxy into the saw cut
Expansion Joint #19:
2. Demo Out the cut tile and any damaged concrete underneath
3. Prepare the surface for installation of quick set epoxy expansion joint products
4. Install the complete epoxy expansion product:
o Place a 3/8” backer rod o Install a quick set epoxy repair compound making it level with the tiles surrounding it o Make a cut above the backer rod and inject a rubberized epoxy into the saw cut
Expansion Joint #20:
joint.
2. Demo Out the cut tile and any damaged concrete underneath
3. Prepare the surface for installation of quick set epoxy expansion joint products
4. Install the complete epoxy expansion product:
o Place a 3/8” backer rod o Install a quick set epoxy repair compound making it level with the tiles surrounding it o Make a cut above the backer rod and inject a rubberized epoxy into the saw cut
Expansion Joint #21:
2. Demo Out the cut tile and any damaged concrete underneath
3. Prepare the surface for installation of quick set epoxy expansion joint products
4. Install the complete epoxy expansion product:
o Place a 3/8” backer rod
Expansion Joint #22:
1. Saw cut with a fine diamond tip blade along the joint of the small tile on the east side of the expansion joint, mirror this cut on the west side so that the finished expansion will be symmetrical.
2. Demo Out the cut tile and any damaged concrete underneath
3. Prepare the surface for installation of quick set epoxy expansion joint products
4. Install the complete epoxy expansion product:
o Place a 3/8” backer rod o Install a quick set epoxy repair compound making it level with the tiles surrounding it o Make a cut above the backer rod and inject a rubberized epoxy into the saw cut
Expansion Joint #23:
1. Demo out existing expansion joint.
2. Prepare the surface for installation of quick set epoxy expansion joint products
3. Install the complete epoxy expansion product:
o Place a 3/8” backer rod o Install a quick set epoxy repair compound making it level with the concrete
Expansion Joint #24:
2. Demo Out the cut tile and any damaged concrete underneath
3. Prepare the surface for installation of quick set epoxy expansion joint products
4. Install the complete epoxy expansion product:
o Place a 3/8” backer rod o Install a quick set epoxy repair compound making it level with the tiles surrounding it o Make a cut above the backer rod and inject a rubberized epoxy into the saw cut
Expansion Joint #25:
2. Demo Out the cut tile and any damaged concrete underneath
3. Prepare the surface for installation of quick set epoxy expansion joint products
4. Install the complete epoxy expansion product:
o Place a 3/8” backer rod o Install a quick set epoxy repair compound making it level with the tiles surrounding it o Make a cut above the backer rod and inject a rubberized epoxy into the saw cut
Expansion Joint #26:
2. Saw cut with a fine diamond tip blade along each edge of the existing aluminum expansion
3. Demo Out the cut tile and any damaged concrete underneath
4. Prepare the surface for installation of quick set epoxy expansion joint products
5. Install the complete epoxy expansion product:
o Place a 3/8” backer rod o Install a quick set epoxy repair compound making it level with the tiles surrounding it o Make a cut above the backer rod and inject a rubberized epoxy into the saw cut
6. Install a cover over the exposed expansion joint, that match the existing joint covers, along the walls with the metal stock holding the crash rail, typically located under the windows.
7. Remove and replace approximately 8 SF of damaged tiles adjacent to the expansion joint. Prepare subfloor as necessary to install new tiles. The tile color is Nurazzo M- 111, the grout color is Latricrete Bright White.
Expansion Joint #27:
4. Demo out existing expansion joint.
5. Prepare the surface for installation of quick set epoxy expansion joint products
6. Install the complete epoxy expansion product:
o Place a 3/8” backer rod
Expansion Joint #28:
1. Saw cut with a fine diamond tip blade along the joint of the small tile on the north side of the expansion joint, mirror this cut on the south side so that the finished expansion will be symmetrical.
2. Demo Out the cut tile and any damaged concrete underneath
3. Prepare the surface for installation of quick set epoxy expansion joint products
4. Install the complete epoxy expansion product:
o Place a 3/8” backer rod o Install a quick set epoxy repair compound making it level with the tiles surrounding it o Make a cut above the backer rod and inject a rubberized epoxy into the saw cut
5. Install a cover over the exposed expansion joint along the walls with the metal stock holding the crash rail.
Expansion Joint #29:
symmetrical.
2. Demo Out the cut tile and any damaged concrete underneath
3. Prepare the surface for installation of quick set epoxy expansion joint products
4. Install the complete epoxy expansion product:
o Place a 3/8” backer rod o Install a quick set epoxy repair compound making it level with the tiles surrounding it o Make a cut above the backer rod and inject a rubberized epoxy into the saw cut
Expansion Joint #30:
2. Demo Out the cut tile and any damaged concrete underneath
3. Prepare the surface for installation of quick set epoxy expansion joint products
4. Install the complete epoxy expansion product:
o Place a 3/8” backer rod o Install a quick set epoxy repair compound making it level with the tiles surrounding it o Make a cut above the backer rod and inject a rubberized epoxy into the saw cut
5. Install a cover over the exposed expansion joint, that match the existing joint covers, along the walls with the metal stock holding the crash rail, typically located under the windows.
6. Remove and replace approximately 3 SF of damaged tiles adjacent to the expansion joint.
Expansion Joint #31:
2. Demo Out the cut tile and any damaged concrete underneath
3. Prepare the surface for installation of quick set epoxy expansion joint products
4. Install the complete epoxy expansion product:
o Place a 3/8” backer rod o Install a quick set epoxy repair compound making it level with the tiles surrounding it o Make a cut above the backer rod and inject a rubberized epoxy into the saw cut
Expansion Joint #32:
symmetrical.
2. Demo Out the cut tile and any damaged concrete underneath
3. Prepare the surface for installation of quick set epoxy expansion joint products
4. Install the complete epoxy expansion product:
o Place a 3/8” backer rod o Install a quick set epoxy repair compound making it level with the tiles surrounding it o Make a cut above the backer rod and inject a rubberized epoxy into the saw cut
Expansion Joint #33:
symmetrical.
2. Demo Out the cut tile, any damaged concrete underneath, and any previous repairs.
3. Prepare the surface for installation of quick set epoxy expansion joint products
4. Install the complete epoxy expansion product:
o Place a 3/8” backer rod o Install a quick set epoxy repair compound making it level with the tiles surrounding it o Make a cut above the backer rod and inject a rubberized epoxy into the saw cut
5. Install a cover over the exposed expansion joint, that match the existing joint covers, along the walls with the metal stock holding the crash rail, typically located under the windows.
6. Remove and replace approximately 3 SF of damaged tiles adjacent to the expansion joint.
Repair the subfloor as necessary to install the new tiles. The tile color is Nurazzo DC-1815 and Nurazzo DC-764, the grout color is Latricrete Bright White.
Expansion Joint #34:
2. Demo Out the cut tile and any damaged concrete underneath
3. Prepare the surface for installation of quick set epoxy expansion joint products
4. Install the complete epoxy expansion product:
o Place a 3/8” backer rod o Install a quick set epoxy repair compound making it level with the tiles surrounding it o Make a cut above the backer rod and inject a rubberized epoxy into the saw cut.
5. Install a cover over the exposed expansion joint, that match the existing joint covers, along the walls with the metal stock holding the crash rail, typically located under the windows.
6. Remove and replace approximately 3 SF of damaged tiles adjacent to the expansion joint.
7. Remove and replace approximately 6 SF of damaged tiles adjacent to the expansion joint. Prepare subfloor as necessary to install new tiles. The tile color is Nurazzo DC-1720, the grout color is Latricrete Sandstone.
Expansion Joint #35:
2. Demo Out the cut tile and any damaged concrete underneath
3. Prepare the surface for installation of quick set epoxy expansion joint products
4. Install the complete epoxy expansion product:
o Place a 3/8” backer rod o Install a quick set epoxy repair compound making it level with the tiles surrounding it o Make a cut above the backer rod and inject a rubberized epoxy into the saw cut
5. Install a cover over the exposed expansion joint, that match the existing joint covers, along the walls with the metal stock holding the crash rail, typically located under the windows.
6. Remove and replace approximately 1 SF of damaged tiles adjacent to the expansion joint. Prepare subfloor as necessary to install new tiles. The tile color is Nurazzo M- 106, the grout color is Latricrete Sauterne.
Expansion Joint #36:
1. Demo the expansion joint, removing all steel and rubber.
2. Prepare the surface for installation of quick set epoxy expansion joint products
3. Install the complete epoxy expansion product:
o Place a 3/8” backer rod
Expansion Joint #37:
symmetrical.
2. Demo Out the cut tile and any damaged concrete underneath
3. Prepare the surface for installation of quick set epoxy expansion joint products
4. Install the complete epoxy expansion product:
o Place a 3/8” backer rod o Install a quick set epoxy repair compound making it level with the tiles surrounding it o Make a cut above the backer rod and inject a rubberized epoxy into the saw cut
Expansion Joint #38:
1. Saw cut with a fine diamond tip blade along the joint of the small tile on the west side of the expansion joint, mirror this cut on the east side so that the finished expansion will be symmetrical.
2. Demo Out the cut tile and any damaged concrete underneath
3. Prepare the surface for installation of quick set epoxy expansion joint products
4. Install the complete epoxy expansion product:
o Place a 3/8” backer rod o Install a quick set epoxy repair compound making it level with the tiles surrounding it o Make a cut above the backer rod and inject a rubberized epoxy into the saw cut.
Expansion Joint #39:
2. Demo Out the cut tile and any damaged concrete underneath
3. Prepare the surface for installation of quick set epoxy expansion joint products
4. Install the complete epoxy expansion product:
o Place a 3/8” backer rod o Install a quick set epoxy repair compound making it level with the tiles surrounding it o Make a cut above the backer rod and inject a rubberized epoxy into the saw cut
Expansion Joint #40:
1. Saw cut with a fine diamond tip blade along the joint of the small tile on the east side of the expansion joint, mirror this cut on the west side so that the finished expansion will be symmetrical.
2. Demo Out the cut tile and any damaged concrete underneath
3. Prepare the surface for installation of quick set epoxy expansion joint products
4. Install the complete epoxy expansion product:
o Place a 3/8” backer rod o Install a quick set epoxy repair compound making it level with the tiles surrounding it o Make a cut above the backer rod and inject a rubberized epoxy into the saw cut
Work Area #1
1. Demo out existing floor tile pieces creating a ramp
2. Prepare subfloor as necessary to install new tiles. The new tiles cannot obstruct functionality of the door.
3. Furnish and replace existing fire rated frames and double doors. These are currently held open by magnets attached to the fire Alarm System with new fire rated framed and double doors. These doors are being replaced in-kind as they are damaged. Contractor is to field verify dimensions, hardware and devices and furnish and replace with new.
4. Install new floor tiles (8 SF). The tile color is Nurazzo DC-094, the grout color is Latricrete Sauterne.
5. Install a schluter strip to transition from the new tile to the existing VCT
6. Install 8’ of cove base to match the existing. The color of the cove base is Johnsonite
Shoreline.
7. Remove existing call box bracket and any conduits back to the small junction box. Ensure junction box has a cover plate.
8. Repair and paint any walls as necessary. Wall color is Manchester Tan.
Work Area #2:
of the door.
3. Furnish and replace existing frie rated frames and double doors. These are currently held open by magnets attached to the fire Alarm System with new fire rated framed and double doors. These doors are being replaced in-kind as they are damaged. Contractor is to field verify dimensions, hardware and devices and furnish and replace with new.
4. Install new floor tiles (16 SF). The tile color is Nurazzo DC-1174, the grout color is Latricrete Bright White.
5. Install a schluter strip to transition from the new tile to the existing VCT in the corridor and a Schluter strip from the new tile to the floor of the office.
6. Install 9’ of cove base to match the existing. The color of the cove base is Tarkett Drizzle
CG.
7. Repair and paint any walls as necessary. Wall color is Symphony Blue Desaturated by
10%.
Work Area #3:
of the door.
3. Install new floor tiles (24 SF). The tile color is Nurazzo DC-764, the grout color is Latricrete
Bright White.
4. Install a schluter strip to transition from the new tile to the existing VCT
5. Repair and paint any walls as necessary. Wall color is White Down.
Work Area #4:
of the door.
3. Furnish and replace existing frie rated frames and double doors. These are currently held open by magnets attached to the fire Alarm System with new fire rated framed and double doors. These doors are being replaced in-kind as they are damaged. Contractor is to field verify dimensions, hardware and devices and furnish and replace with new.
4. Install new floor tiles (24 SF). The tile color is Nurazzo M-106 Cocoa Brown, the grout color is Latricrete Sauterne.
5. Install a schluter strip to transition from the new tile to the existing VCT
6. Repair and paint any walls as necessary. Wall color is Coastal Path.
Work Area #5:
of the door.
3. Furnish and replace existing frie rated frames and double doors. These are currently held open by magnets attached to the fire Alarm System with new fire rated framed and double doors. These doors are being replaced in-kind as they are damaged. Contractor is to field verify dimensions, hardware and devices and furnish and replace with new.
4. Install new floor tiles (16 SF). The tile color is Nurazzo DC-1882, the grout color is Latricrete Bright White.
5. Install a schluter strip to transition from the new tile to the existing VCT
6. Install 10’ of cove base to match the existing. The color of the cove base is Tarkett Clay.
7. Repair and paint any walls as necessary. Wall color is Farm Fresh.
Work Area #6:
of the door.
3. Furnish and replace existing frie rated frames and double doors. These are currently held open by magnets attached to the fire Alarm System with new fire rated framed and double doors. These doors are being replaced in-kind as they are damaged. Contractor is to field verify dimensions, hardware and devices and furnish and replace with new.
4. Install new floor tiles (40 SF). The tile color is Nurazzo M-111 Terra, the grout color is Latricrete Bright White.
5. Install a schluter strip to transition from the new tile to the existing VCT
6. Install 6’ of cove base to match the existing. The color of the cove base is Tarkett Moon
Rock WG.
7. Repair and paint any walls as necessary. Wall color is Fawn Brindle.
Work Area #7:
of the door.
3. Furnish and replace existing frie rated frames and double doors. These are currently held open by magnets attached to the fire Alarm System with new fire rated framed and double doors. These doors are being replaced in-kind as they are damaged. Contractor is to field verify dimensions, hardware and devices and furnish and replace with new.
4. Install new floor tiles (32 SF). The tile color is Nurazzo M-106 Cocoa Brown, the grout color is Latricrete Sauterne.
5. Install a schluter strip to transition from the new tile to the existing VCT
6. Install 10’ of cove base to match the existing. The color of the cove base is Tarkett Iguana.
7. Repair and paint any walls as necessary. Wall color is Koi Pond.
File details come from the government source that posted it. Updated .