3_Agreement_Attachment 2_WD NV20260091_2026 06 25.pdf

"General Decision Number: NV20260091 06/25/2026

State: Nevada

Construction Types: Building

Counties: Nevada Counties of Clark

Excludes Nevada Test Site (NTS), Tonopah Test Range (TTR) and National Test and Training Range (NTTR)

Modification Number Publication Date 0 06/22/2026 1 06/25/2026

SANV2025-001 10/01/2025

Rates Fringes Truck Driver: Group 7 (Truck Repairman, Transports, Hot Oil Drivers, and Road Oil Spreader Drivers.)....$ 39.20 34.61 Truck Driver: Group 6 (All Off-road Equipment, OW 10 and OW 20 Euclid-type equipment Letourneau pulls, Terra Cobras and similar types of equipment, also PB and similar type trucks when performing work within the Teamster jurisdiction, regardless of types of attachment, including power units pulling off-highway belly dumps in tandem.).........$ 38.20 34.61 Truck Driver: Group 5 (Drivers of trucks and trailers in combination (six axles or more))........$ 37.85 34.61 Truck Driver: Group 4 (Drivers of transit-mix trucks (6 yds or more), drivers of dump trucks (over 22 yds. water level), drivers of trucks (legal payload capacity 25 tons and over) drivers of fuel and water trucks (6,000 gallon and over).)..$ 37.70 34.61 Truck Driver: Group 3 (Drivers of dump trucks (16 yds up to and including 22 yds water level), drivers of trucks (legal payload cap. 20 tons but less than 25 tons), drivers of dumpster trucks, drivers of transit-mix trucks (3 yds but less than 6 yds), dumpcrete trucks (6 � yds water level and over), fork lift driver, Ross Carrier driver, highway water and fuel drivers (4,001 gallon but less than 6,000 gallon), stock room clerk, tireman.)...........................................$ 37.52 34.61 Truck Driver: Group 2 (Drivers of dump trucks (12 yds but less than 16 yds water level), drivers of trucks (legal payload capacity between 15 and 20 tons), drivers of transit mix trucks (under 3 yds), dumpcrete trucks (less than 6 � yds water level), gas and oil pipeline working truck drivers, including winch truck and all sizes of trucks, water and fuel truck drivers (2,500 gal to 4,000 gal), truck greaser, drivers of busses (on jobsite used for transportation or more than sixteen (16) passengers), warehouse clerk.)......................$ 37.31 34.61

Truck Driver: Group 1 (Drivers of dump trucks (less than 12 yds. water level), drivers of trucks (legal payload capacity less than 15 tons), water and fuel truck drivers under 2,500 gal, pickup driver, service station attendant, teamster equipment (highest rate paid for dual craft operation), warehousemen, drivers of busses on site used for transportation of up to sixteen (16) passengers.)...$ 37.21 34.61 Traffic Barrier Erector: Traffic Barrier Erector....$ 38.53 33.59 Taper (Drywall): Painter Jounreyman.................$ 50.62 25.60 Sprinkler Fitter: Journeyman .......................$ 53.77 31.15 Sheet Metal Worker: Journeyman .....................$ 59.85 33.51 Roofer: Journeyman..................................$ 40.76 12.42 Refrigeration Mechanic: Journeyman .................$ 43.10 26.54 Plumber/Pipefitter: Journeyman .....................$ 60.00 27.43 Plasterer: Journeyman ..............................$ 51.85 18.94 Piledriver: Tender..................................$ 55.77 29.02 Piledriver: Stand By Diver..........................$ 56.77 29.02 Piledriver: Driverman...............................$ 50.70 29.02 Piledriver: Diver-Diving (Wet Pay)..................$ 113.54 29.02 Piledriver: Certified Welder........................$ 51.70 29.02 Painter/Taper/Paperhanger: Journeyman...............$ 50.62 25.60 Operating Engineers-Piledriver & Hoisting Equipment: Group 9 (Oiler (Over 200 tons))..........$ 65.20 36.69 Operating Engineers-Piledriver & Hoisting Equipment: Group 8 (Oiler (40 tons up to including 200 tons M.R.C))....................................$ 64.52 36.69 Operating Engineers-Piledriver & Hoisting Equipment: Group 7 (Derrick Barge Operator (over 25 tons, up to and including 50-ton M.R.C.); Highline Cableway Operator; Hoist Operator, Stiff Legs, Guy Derrick or similar type (over 25 tons, up to and including 50-ton M.R.C.); K-Crane; Polar Crane Operator; Self-Erecting Tower Crane Operator Maximum Lifting Capacity ten (10) tons. One (1) ton operator))..........................................$ 64.36 36.69 Operating Engineers-Piledriver & Hoisting Equipment: Group 6 (Crawler Transporter Operator (Track or Rubber-Tired, Goldhofer or similar type);

Derrick Barge Operator (under 25 tons, up to and including 50 tons M.R.C.); Hoist Operator, Stiff Legs, Guy Derrick or similar type (up to and including 25 ton M.R.C.); Shovel, Dragline, Clamshell Operator (over 7 cu. yds. M.R.C.); Timber Handler - Sennebogen or similar types (tree hoisting/removal/site clearing); Rotational Telehandler Operator (when Crane Certification is required); Self-Propelled Modular Transporter (Schuerle, Goldhofer or similar types)..............$ 64.19 36.69 Operating Engineers-Piledriver & Hoisting Equipment: Group 5 (Pedestal Crane Operator;

Shovel, Dragline, Clamshell Operator (over 5 cu.

yds. M.R.C.); Tower Crane Repairman; Tugger Hoist Operator (3 drum))..................................$ 64.02 36.69 Operating Engineers-Piledriver & Hoisting Equipment: Group 4 (Bridge Crane Operator; Creter Crane Operator; Hoist Operator (Chicago Boom and similar type); Lift Mobile Operator; Lift Slab Machine Operator (Vagtborg and similar types);

Material Hoist/Manlift Operator; Ojjo Earth Truss Driver Machine Operator or similar types; PD10 Pile driver (or similar types); Polar Gantry Crane Operator; Prentice Self-Loader; Self-Climbing Scaffold (or similar type); Shovel, Dragline, Clamshell Operator (over 3/4 yd. and up to 5 cu.

yds. M.R.C.); Silent Piler (Giken or similar types); Snobble Unit (pin-n-go or similar type);

Tugger Hoist Operator (2 drum)).....................$ 63.90 36.69 Operating Engineers-Piledriver & Hoisting Equipment: Group 3 (Hydraulic Boom Truck (Pitman;

Knuckleboom; Spyder Crane (or similar type);

Stinger Crane (Austin-Western or similar type);

Tugger Hoist Operator (1 drum)).....................$ 63.79 36.69 Operating Engineers-Piledriver & Hoisting Equipment: Group 24 (Crane Operator (over 500 tons M.R.C.))............................................$ 72.88 36.69 Operating Engineers-Piledriver & Hoisting Equipment: Group 23 (Crane Operator (over 350 tons, up to and including 500-ton M.R.C.))................$ 72.38 36.69 Operating Engineers-Piledriver & Hoisting Equipment: Group 22 (Crane Operator (over 300 tons, up to and including 350-ton M.R.C.))................$ 71.92 36.69 Operating Engineers-Piledriver & Hoisting Equipment: Group 21 (Crane Operator (over 250 tons, up to and including 300-ton M.R.C.))................$ 71.16 36.69 Operating Engineers-Piledriver & Hoisting Equipment: Group 20 (Crane Operator (over 200 tons, up to and including 250-ton M.R.C.))................$ 70.55 36.69 Operating Engineers-Piledriver & Hoisting Equipment: Group 2 (Bridge-Typle Unloader and Turntable Operator; Helicopter Hoist Operator)......$ 63.57 36.69 Operating Engineers-Piledriver & Hoisting Equipment: Group 19 (Crane Operator (over 150 tons, up to and including 200-ton M.R.C.))................$ 69.94 36.69 Operating Engineers-Piledriver & Hoisting Equipment: Group 18 (Derrick Barge Operator (over 300 tons); Helicopter Pilot; Hoist Operator, Stiff Legs, Guy Derrick or similar type (over 300 tons);

Tower Crane Operator (over 300 tons))...............$ 68.36 36.69 Operating Engineers-Piledriver & Hoisting Equipment: Group 17 (Crane Operator (over 80 Tons, up to and including 150-ton M.R.C.))................$ 67.91 36.69 Operating Engineers-Piledriver & Hoisting Equipment: Group 16 (Crane Operator (over 40 tons, up to and including 79-ton M.R.C.)..................$ 67.41 36.69 Operating Engineers-Piledriver & Hoisting Equipment: Group 15 (Derrick Barge Operator (over 200 tons, up to and including 300-ton M.R.C.);

Hoist Operator, Stiff Legs, Guy Derrick or similar type (over 200 tons, up to and including 300-ton M.R.C.))............................................$ 67.36 36.69 Operating Engineers-Piledriver & Hoisting Equipment: Group 14 (Luffing Boom Oiler)............$ 67.20 36.69 Operating Engineers-Piledriver & Hoisting Equipment: Group 13 (Derrick Barge Operator (over 100 tons, up to and including 200-ton M.R.C.);

Hoist Operator, Stiff Legs, Guy Derrick or similar type (over 100 tons, up to and including 200-ton M.R.C)).............................................$ 66.36 36.69 Operating Engineers-Piledriver & Hoisting Equipment: Group 12 (Crane Operator (up to and including 40-ton capacity)).........................$ 65.99 36.69 Operating Engineers-Piledriver & Hoisting Equipment: Group 11 (Crane Heavy Duty Repairman)....$ 65.66 36.69 Operating Engineers-Piledriver & Hoisting Equipment: Group 10 (ABI/Fundex Machine; Derrick Barge Operator (over 50 tons, up to and including 100-ton M.R.C); Hoist Operator, Stiff Legs, Guy Derrick or similar type (over 50 tons, up to and including 100-ton M.R.C); Vibrocat Stone Column

Operator or similar types)..........................$ 65.36 36.69 Operating Engineers-Piledriver & Hoisting Equipment: Group 1 (A-Frame or Winch Truck Operator; Ross Carrier Operator Jobsite))...........$ 63.43 36.69 Operating Engineers: Group 9 (Heavy Duty Repairman (Multi-Shift))......................................$ 65.00 36.69 Operating Engineers: Group 8 (Allroad Mobile Timber Harvester (Albach or similar types); Asphalt or Concrete Spreading Operator (Tamping or Finishing);

Asphalt Paving Machine Operator (Barber Greene or similar type); Asphalt-Rubber Distributor Operator;

Backhoe Operator (up to and including � yd.) Small Ford, Case or similar.; Backhoe Operator (over� yd.

and up to 5 cu. yd. M.R.C); Barrier Rail mover;

Cable Bundling Machine Operator; Cable Trenching Machine Operator (Spider Plow or similar types);

Cast in Place Pipe Laying Machine Operator; Cold Foamed Asphalt Recycler; Combination Mixer and Compressor Operator (Gunite Work); Compactor Operator - self propelled; Concrete Mixer Operator

- Paving; Crushing Plant Operator (Non-Portable);

Drill Doctor); � Drilling Machine Operator, Bucket or Auger Types (Calweld 150 Bucket or similar types

- Watson 1500, 2000, 2500 Auger or similar types - Texoma 700, 800 Auger or similar types - drilling depth of 60' maximum); Elevating Grader Operator;

Excavator Track/Rubber-Tired- with all attachments (operating Weight 21,000 lbs-1000,000 lbs.; Global Positioning Systems/GPS; Grade Checker; Gradall Operator; Grouting Machine Operator; Heavy Duty Repairman; Heavy Equipment Robotics Operator;

Hydraulic Casing oscillator Operator-drilling depth of 60' maximum; Hydraulic Operated-drilling depth of 60"" maximum; Hydraulic Operated Grout Plant (excludes hand loading); Kalamazoo Ballast Regulator or similar type; Kalamazoo Switch Tamper, or similar type; Klemm drill Operator or similar types; Kolman Belt Loader and similar type; Le Tourneau Blob Compactor or similar type; Lo Drill;

Loader Operator (Athey, Euclid, Sierra and similar types); Master Environmental Maintenance Mechanic;

Mobark Chipper or similar types; Ozzie Padder or similar types; PC 490 Slot Saw; Pneumatic Concrete Placing Machine Operator (Hackley-Presswell or similar type); Portable Crushing Plant Operator;

Prentice 721E Hydro-Ax; Pumpcrete Gun Operator; RCM Cementing Unit Operator; Rail/Switch Grinder Operator (Harsco or similar types); Rail Tie Crane (Kershaw or similar type); Rock Drill or similar types; Rotary Drill Operator (excluding Caison type); Roto Mill Operator; Rubber-Tired Earth Moving Equipment Operator (single engine, Caterpillar, Euclid, Athey Wagon, and similar types with any and all attachments over 25 yds. and up to and including 50 cu. yds. struck); Rubber-Tired Earth Moving Equipment Operator (multiple engine -up to and including 25 yds. struck); Rubber-Tired Scraper Operator (self-loading paddle wheel type - John Deere, 1040 and similar single unit);

Self-Propelled Curb and Gutter Machine Operator;

Shuttle Buggy; Skiploader Operator (crawler and wheel type over 1� yds. up to and including 6� yds.); Soil Remediation Plant Operator (C.M.I.

Enviro Tech Thermal or Similar Types) (Oiler Required Group II); Soil Stabilizer and Reclaimer;

Surface Heaters and Planer Operator; Somero SXP Laser screed; Speed Swing Operator; Spike Driver (Nordco Hammer or similar types); Surface Heaters and Planer Operator; Tie Adzer; Track Spike Puller Machine Operator (Nordco or similar types); Tractor Compressor Drill Combination Operator; Tractor Operator (any type larger than D-5 - 100 flywheel h.p. and over, or similar - Bulldozer, Tamper, Scraper and Push Tractor, single engine); Tractor Operator (boom attachments); Traveling Pipe Wrapping, Cleaning and Bending Machine Operator;

Trenching Machine Operator (over 6 ft. depth capacity, manufacturer's ratingTrenching Machine with Road Miner Attachment (over 6 ft. depth capacity, manufacturer's rating); Ultra High-Pressure Waterjet Cutting Tool System Mechanic; Water Pull (compaction)...................$ 63.90 36.69 Operating Engineers: Group 7 (Welder - General (Multi-Shift))......................................$ 64.89 36.69 Operating Engineers: Group 6 (Articulating Material Hauler; Asphalt Plant Engineer; Batch Plant Operator; Bit Sharpener; Concrete Joint Machine Operator (canal and similar type); Concrete Placer Operator; Concrete Planer; Dandy Digger; Deck Engine Operator; Deck Engineer; Derrickman (Oilfield type); DeSanding Plant Operator; Drilling Machine Operator, Bucket or Auger Types (Calweld 100 Bucket or similar types - Watson 1000 Auger or similar types -Texoma 330, 500 or 600 Auger or similar types - drilling depth of 45' maximum);

Drilling Machine Operator (including water wells);

Force Feed Loader; High Rail Swivel Dump; Hydraulic Casing Oscillator Operator; Hydro Seeder Machine Operator (straw, pulp or seed); Jackson Track Maintainer, or similar type; Machine Tool Operator;

Maginnis Internal Full Slab Vibrator; Mechanical Berm, curb or gutter (concrete or asphalt);

Mechanical Finisher Operator (concrete, Clary-Johnson-Bidwell or similar); Micro Tunnel System (below ground); MST 2200, Track Dumps;

Pavement Breaker Operator (truck mounted); Prentice High Rail Loader; Railcar Mover; Road Oil Mixing Machine Operator; Roller Operator (asphalt or finish); Rubber-Tired Earth Moving Equipment (single engine, up to and including 25 yds.

struck); Self-Propelled Tar Pipelining Machine Operator; Rumble Strip Grinder; Skiploader Operator (crawler and wheel type, over� yd. and up to and including 1� yds.); Slip Form Pump Operator (power driven hydraulic lifting device for concrete forms); Tractor Operator - Bulldozer, Tamper-Scraper (single engine, up to 100 h.p.

flywheel and similar types, up to and including D-5 and similar types); lugger Hoist Operator (1 drum);

Ultra High-Pressure Waterjet Cutting Tool System Operator; Vacuum Blasting Machine Operator;

Volumetric Mixer Operator; Welder - General)........$ 63.79 36.69 Operating Engineers: Group 5 (Equipment Greaser (Grease Truck/Multi-Shift)).........................$ 64.67 36.69 Operating Engineers: Group 4 (All Terrain Placers/All Terrain Stone Slingers; Asphalt Plant Fireman; Backhoe Operator (Mini-Max or similar type); Boring Machine and/or pilot Tube Machine Operator; Boring System Electronic Tracking Locator; Boxman or Mixerman (Asphalt or Concrete);

Chip Spreading Machine Operator; Concrete Cleaning Decontamination Machine Operator; Concrete Pump Operator (small portable); Direct Push Operator (Geoprobe or similar types); Drilling Machine Operator, Small Auger Types (Texoma Super Economatic, or similar types - Hughes 100 or 200, or similar types - drilling depth of 30' maximum);

Equipment Greaser (Grease Truck); Excavator Track/Rubber-Tired-wth all attachments (Operating weight under 21,000lbs); Guard Rail Post Driver Operator; Highline Cableway Signalman; Horizontal Directional Drilling Machine; Hydraulic Casing Oscillator Operator-drilling depth of 30'maximum;

Hydrovac Operator; Hydra-Hammer-Aero Stomper; Micro Tunneling (above ground tunnel); Power Concrete Curing Machine Operator; Power Concrete Saw Operator; Power - Driven Jumbo Form Setter Operator; Power Sweeper Operator; Rock Wheel Saw/Trencher; Roller Operator (compacting); Screed Operator (Asphalt or Concrete); Trenching Machine Operator (up to 6 ft.); Vacuum or Muck Truck).......$ 63.57 36.69 Operating Engineers: Group 3 (Asphalt-Rubber Blend Operator; Bobcat or similar type (Skid Steer);

Equipment Greaser (rack); Ford Ferguson (with dragtype attachments); Helicopter Radioman (ground); Stationary Pipe Wrapping and Cleaning Machine Operator)...................................$ 62.08 36.69 Operating Engineers: Group 25 (Concrete Pump Operator - truck mounted (Oiler required when boom over 105' or 36 meters); Pedestal Concrete Pump Operator; Rubber-Tired Earth Moving Equipment Operator, operating equipment with the Tandem Push-Pull System (multiple engine, Euclid, Caterpillar and similar type, over 50 cu. yds.

struck); Spyder Excavator Operator, with all attachments)........................................$ 65.69 36.69 Operating Engineers: Group 24 (Rubber-Tired Earth Moving Equipment Operator, operating equipment with the Tandem Push-Pull System (single engine, over 50 yds. struck); Rubber-Tired Earth Moving Equipment Operator, operating equipment with the Tandem Push-Pull System (multiple engine, Euclid, Caterpillar and similar, over 25 yds. & up to 50 yds. struck)).......................................$ 65.52 36.69 Operating Engineers: Group 23 (Rubber-Tired Earth Moving Equipment Operator, operating equipment with the Tandem Push-Pull System (single engine, Caterpillar, Euclid, Athey Wagon, and similar types with any and all attachments over 25 yds. and up to and including 50 cu. yds. struck); Rubber-Tired Earth Moving Equipment Operator, operating equipment with the Tandem Push-Pull System (multiple engine, up to and including 25 yds.

struck))............................................$ 65.40 36.69 Operating Engineers: Group 22 (Rubber-Tired Earth Moving Equipment Operator, operating equipment with the Tandem Push-Pull System (single engine, up to and including 25 yds. struck))......................$ 65.29 36.69 Operating Engineers: Group 21 (Rubber-Tired Earth Moving Equipment Operator, operating in Tandem (scrapers, belly dumps, and similar types in any combination, excluding compaction units - multiple engine, Euclid, Caterpillar and similar type, over 50 cu. yds. struck))................................$ 65.19 36.69 Operating Engineers: Group 20 (Rubber-Tired Earth

Moving Equipment Operator, operating in Tandem (scrapers, belly dumps, and similar types in any combination, excluding compaction units - single engine, over 50 yds. struck); Rubber-Tired Earth Moving Equipment Operator, operating in Tandem (scrapers, belly dumps, and similar types in any combination, excluding compaction units - multiple engine, Euclid, Caterpillar and similar, over 25 yds. and up to 50 yds. struck)).....................$ 65.02 36.69 Operating Engineers: Group 2 (Asphalt-Rubber Plant Operator (Nurse Tank Operator); Coil Rig Operator;

Concrete Mixer Operator - Skip type; Conveyor Operator; Fireman; Forklift Operator (over 5 Tons);

Heliostat assembly System (Operator Related Work);

Hydrostatic Pump Operator; Oiler Crusher (Asphalt or Concrete Plant); PJU Side Dump Jack;

Profilograph; Screening and Conveyor Machine Operator (or similar types); Skiploader (wheel type up to � yd. without attachment); Tar Pot Fireman;

Temporary Heating Plant Operator; Trenching Machine Oiler...............................................$ 61.79 36.69 Operating Engineers: Group 19 (Rotex Concrete Belt Operator (or similar types); Rubber-Tired Earth Moving Equipment Operator, operating in Tandem (scrapers, belly dumps, and similar types in any combination, including compaction units - single engine, Caterpillar, Euclid, Athey Wagon, and similar types with any and all attachments over 25 yds. and up to and including 50 cu. yds. struck);

Rubber-Tired Earth Moving Equipment Operator, operating in Tandem (scrapers, belly dumps, and similar types in any combination, excluding compaction units - multiple engine, up to and including 25 yds. struck))..........................$ 64.90 36.69 Operating Engineers: Group 18 (Rubber-Tired Earth Moving Equipment Operator, operating in Tandem (scrapers, belly dumps, and similar types in any combination, excluding compaction units - single engine, up to and including 25 yds. struck))........$ 64.79 36.69 Operating Engineers: Group 17 (Rubber-Tired Earth Moving Equipment Operator, operating equipment with the Push-Pull System (multiple engine, Euclid, Caterpillar and similar type, over 50 cu. yds.

struck); Tandem Tractor Operator (operating crawler type tractors in tandem - Quad 9 and similar type)).$ 64.69 36.69 Operating Engineers: Group 16 (Excavator track/Rubber-Tired-with all attachments (Operating Weight exceeding 200,000lbs); Rubber-Tired Earth Moving Equipment Operator, operating equipment with the Push-Pull System (single engine, over 50 yds.

struck); Rubber-Tired Earth Moving Equipment Operator, operating equipment with the Push-Pull System (multiple engine, Euclid, Caterpillar and similar, over 25 yds. and up to 50 yds. struck))....$ 64.52 36.69 Operating Engineers: Group 15 (Rubber-Tired Earth Moving Equipment Operator, operating equipment with the Push-Pull System (single engine, Caterpillar, Euclid, Athey Wagon, and similar types with any and all attachments over 25 yds. and up to and including 50 cu. yds. struck); Rubber-Tired Earth Moving Equipment Operator, operating equipment with the Push-Pull System (multiple engine - up to and including 25 yds. struck))..........................$ 64.40 36.69 Operating Engineers: Group 14 (Canal Liner Operator (not less than four (4) employees - Operator, Oiler, Welder, Mechanic, Grade Checker required);

Canal Trimmer Operator; Drilling machine Operator, Bucket or auger Types (Calweld, Auger 200 CA or similar types - Watson, August 6000 or similar types-Hughes Super Duty, Auger 200 or similar types

- drilling depth of 300"" maximum); Remote Controlled Earth Moving Equipment Operator (no one

(1) Operator shall operate more than two (2) pieces of earth moving equipment at one time - One Dollar ($1.00) per hour additional to base rate); Wheel Excavator Operator (over 750 cu. yds. per hour))....$ 64.32 36.69 Operating Engineers: Group 13 (Rubber-Tired Earth Moving Equipment Operator, operating equipment with the Push-Pull System (single engine, up to and including 25 yds. struck))..........................$ 64.29 36.69 Operating Engineers: Group 12 (Auto Grader Operator; Automatic Slip Form Operator; Backhoe Operator (over 7 cu. Yds, M.R.S); Drilling Machine Operator, Bucket or Auger Types (Calweld, Auger 200 CA or similar types - Watson, Auger 6000 or similar types- Hughes Super Duty, Auger 200 or similar types - drilling depth of 175' maximum); Excavator Track/Rubber Tired - with all attachments (Operating Weight 100,000 lbs. - 200,000 lbs.); Hoe Ram or similar with Compressor; Hydraulic Casing Oscillator Operator - drilling depth of 175' maximum; Mass Excavator Operator - Less than 750

cu. yds.; Mechanical Finishing Machine Operator;

Mobile Form Traveler Operator; Motor Patrol Operator (multi-engine); Pipe Mobile Machine Operator; Rubber-Tired Earth Moving Equipment Operator (multiple engine, Euclid, Caterpillar and similar type, over 50 cu. yds. struck);

Rubber-Tired Self-Loading Scraper Operator (paddle-wheel-Auger type self-loading - two (2) or more units); Vermeer Rock Trencher (or similar type))..............................................$ 64.19 36.69 Operating Engineers: Group 11 (Dynamic Compactor LDC350 (or similar types); Heavy Duty Repairman-Welder Combination (Multi-Shift);

Welder-Certified (Multi-Shift)......................$ 65.12 36.69 Operating Engineers: Group 10 (Backhoe Operator (over 5 cu.yds. M.R.C); Drilling Machine Operator, Bucket or Auger Types (Calweld 200 B Bucket or similar types - Watson 3000 or 5000 Auger or similar types - Texoma 900 Auger or similar types -drilling depth of 105' maximum); Dual Drum Mixer;

Heavy Duty Repairman-Welder Combination; Hydraulic Casing Oscillator Operator-drilling depth of 105' maximum; Monorail Locomotive Operator (diesel, gas or electric); Motor Patrol - Blade Operator (single engine); Multiple Engine Tractor Operator (Euclid and similar type - except Quad 9 Cat.); Pneumatic Pipe Ramming Tool and similar types; Pre-Stressed Wrapping Machine Operator (2 Operators required);

Production Tamper - Harsco or similar; Rail Dynamic Stablizer; Rubber-Tired Earth Moving Equipment Operator (single engine, over 50 yds. struck);

Rubber-Tired Earth Moving Equipment Operator (multiple engine, Euclid, Caterpillar and similar -over 25 yds. and up to 50 yds. struck); Tower Crane Repairman; Tractor Loader Operator (crawler and wheel-type over 6� yds.); Unmanned Aircraft Systems (UAS Drones) Operator (when used in conjunction with hoisting and placing materials;

Welder-Certified; Woods Mixer Operator (and similar Pugmill equipment)).................................$ 64.02 36.69 Operating Engineers: Group 1 (Bargeman; Brakeman;

Compressor Operator; Ditch Witch, with seat or similar type equipment; Elevator Operator - inside;

Engineer Oiler; Forklift Operator (under 5 Tons);

Generator Operator; Generator, Pump or Compressor Plant Operator; Inertial Profiler; Pump Operator;

Signalman; Steam Cleaner/Pressure Washer;

Switchman)..........................................$ 60.84 36.69 Millwright: Welder (certified)(add $3 to Journey base)...............................................$ 51.93 31.54 Millwright: Journeyman .............................$ 48.93 31.54 Mechanical Insulator: Journeyman ...................$ 62.00 23.53 Laborers: Group 8 (Attending to, handling and fueling single diaphragm pumps, insulation pumps, plasterer pumps, monocoat pumps, grout pumps; Mason finisher: Plaster Tending shall consist of preparation of materials and the handling and conveying of materials to be used by mechanics of other crafts, whether such preparation is by hand or any other process. After the material has been prepared, tending shall include the supplying and conveying of said material and other materials, to such mechanic, whether by bucket, hod, wheelbarrow, buggy or other motorized unit for such purpose, including forklifts.)...............................$ 39.93 33.59 Laborers: Group 7 (Asbestos Abatement; Lead Abatement; Hazardous Waste Abatement;

Petro-Chemical Abatement; Radiation Remediation;

Microbial Remediation; Employees shall be properly certified and/or licensed at time of dispatch)......$ 38.84 33.59 Laborers: Group 6F High Scaler......................$ 57.65 33.59 Laborers: Group 6E (Tunnel Boring Machine)..........$ 51.19 33.59 Laborers: Group 6D (Miner-Welder)...................$ 51.55 33.59 Laborers: Group 6C (Bull Gang, Mucker, Trackman)....$ 50.94 33.59 Laborers: Group 6B (Miner-Tunnel (Hard Rock)........$ 51.19 33.59 Laborers: Group 6A (Shaft, Raise, Stop Miner).......$ 51.69 33.59 Laborers: Group 5 (Driller (core, diamond or wagon); Air track drill (all types); Joy driller model TW-M-2A. Gardner-Denver model DH 143 and similar type drills (in accordance with Memorandum of Understanding between Laborers and Operating Engineers dated Miami, Florida, February 3, 1954);

Gas and oil pipeline fusion; Gas and oil pipeline wrappers, 6"" pipe and over).........................$ 39.03 33.59 Laborers: Group 4 (Cribber or shorer, lagging, sheeting, trench bracing, hand guided lagging hammer head rock slinger; Powderman-blaster, all work of loading holes, placing and blasting of all powder and explosives if whatever type, regardless of method used for such loading and placing;Sandblaster (nozzleman) Steel header-board man Construction Specialist)........................$ 38.93 33.59 Laborers: Group 3A (Placement of all concrete, including red concrete by any means Concrete Specialists; Mudd Cutter; Concrete vibrator operator, all sizes; Concrete Dumper;

Slickline/Hoseman/Dumpman)..........................$ 39.84 33.59 Laborers: Group 3 (Cutting torch operator Welding in connection with laborers work Gas and oil pipeline wrapper; Gas and oil pipeline laborer, certified Jackhammer and/or pavement beaker;

Installing, laying and the connections of all metallic and non-metallic pipe, p.v.c. and drop inlet and duct bank, including landscape sprinklers, sewer pipe, drain pipe and underground tile; Cement dumper (on one yard or larger mixers and handling bulk cement) Concrete core cutter;

Concrete curer, impervious membrane and oiler of all materials; Concrete saw man.excluding tractor type, cutting scoring old or new concrete Operator of cement grinding machine; Rock slinger; Scaler (using boswain chair or safety belt or power tools under 100 feet); Forklift - A journeyman shall hold Forklift certification at time of referral for duration of employment. Bobcat/skid steer, Gannon tractor; Working Dust control monitor, Single Axle water and Single Axle Dump Trucks Hodcarrrier-Mason Tender/Mason Finisher; Decorative Rock Installer - (Ponds, Waterfalls, etc.) Concrete striking, floating, epoxy finish, self-leveling material.and overlay; Shotcrete/Gunnite).........................$ 38.84 33.59 Laborers: Group 2 (Asphalt raker, ironer, spreader, and luteman Buggymobile man; Cesspool digger and installer Chuck tender (except tunnels); Gas and oil pipeline wrapper, pot tender and form man Making and caulking of all non-metallic pipe joints; Operators and tenders of pneumatic and electric tools, video x-ray, vibrating machines, hand propelled trenching machines, vacuum truck/ hydro excavation operation, and all associated components for Is operation, impact wrench multi-plate and similar mechanical tools not separately classified herein Riprap stonepaver;

Rota-scraper; Sandblaster (pot tender); Septic tank digger and installer (lead man) Tank scaler and cleaner; Tree climber, faller, chain saw operator, Pittsburgh chipper and similar type brush shredders)..........................................$ 38.74 33.59 Laborers: Group 1A (Flagger/flag person; Pilot car;

Final clean up subject to this rate shall mean:

Polishing furniture; Polishing stainless steel in hotel kitchens; Sweeping and vacuuming hallways and finished rooms and completed casino areas; Washing windows on first floor and similar duties)..........$ 37.03 33.59 Laborers: Group 1 (Traffic Control Tech and working Traffic Control Supervisor; All pressure washing, all surface preparation for patching and grouting, dry packing of concrete and filling of form bolt holes; Subgrade, finish/fine grade with use of granule or non-granule material, vapor barriers, lasers, string line, setting and leveling on highway, street paving, sidewalk, driveways, airport runways and similar type heavy construction; Gas and oil pipeline; Guinea chaser;

Laborer, general, construction, demolition, surgical demolition, selective demolition or Solar-Stringing of posts, installation of posts and piles, installation and bolting together of all rakes, tray tables and torque tubes. Running all bobcats, skid steers, forklifts, Turchis or similar equipment for post installation. Trashing out crates, cardboard boxes and trash within the solar arrays and Solar project boundaries.; Laborer, packing rod steel and pans; Laborer, temporary water lines (portable type); Laborer, loading and unloading solar panels, crates and pallets;

Laborer, handling, Installing, and setting of all solar panels/ wire management but not connections

Landscape gardener (Must have knowledge of plant materials and how to plant them. Lays out plant arrangements to-follow the landscape plan); Stone pavers; Nurseryman; Tarman and mortar man, kettle man, potman and man applying asphalt, lay cold creosote, fine and similar type materials.

(""Applying"" means applying, dipping, brushing or handling of such materials for pipe wrapping and water proofing.); Underground laborer, including caisson bellowers; Window cleaner; Scaffold Erector-(ExcludesTenders); Fence Erector includes but not limited to: erecting or repairing, Chain Link, wooden, metal, vinyl, steel, tortoise, wire/ wire mesh or temporary fence. Mortarless, Barrier Wall and/or Retaining Walls; Digging post holes with spade. Post hole digger or power-driven auger;

Aligning post through the use of lines or by sighting; verifying vertical alignment of post with a plumb bob or spirit level.; Mechanical Stabilized Earth Wall; Material Handler - for all trades, including but not limited to stacking and packing of all drywall, taping mud, paint, wallpaper, wall coverings and material associated there with including Demolition of said materials.; All Construction cleanup and Final clean-up (picking up debris, sweeping, scraping and janitorial work, including final clean-up), on all jobsites shall be the work of the Laborers, including mass jobsite clean-up by All Contractors and Sub- Contractors.

except as provided in Group 1A; Tool Crib; Light Tool Repairman Certified; Firewatch; Rigging and signaling when assigned by the Contractor and/or performing the work of a Laborer or tending another craft)..............................................$ 38.53 33.59 Hod Carrier-Plaster Tender: Journeyman .............$ 39.93 33.59 Hod Carrier-Brick Mason Tender: Journeyman .........$ 38.84 33.59 Glazier: Glazier Journeyman.........................$ 60.76 30.47 Floorcoverer: Journeyman............................$ 47.82 20.55 Flagperson: Journeyman..............................$ 37.03 33.59 Fence Erector: Journeyman...........................$ 38.53 33.59 Elevator Constructor: Journeyman Mech...............$ 69.43 40.04 Electrician-Neon Sign: Journeyman...................$ 48.12 21.56 Cement Mason: Journeyman ...........................$ 52.29 19.97 Carpenter: Welder...................................$ 51.50 29.02 Carpenter: Journeyman...............................$ 50.50 29.02 Bricklayer: Journeyman..............................$ 53.57 21.26 Boilermaker: Journeyman.............................$ 76.62 0.00 Air Balance Technician: Journeyman..................$ 59.85 33.51

SANV2025-002 04/13/2026

Rates Fringes Tile, Terrazzo, Marble: Tile Setter.................$ 54.92 19.27 Tile, Terrazzo, Marble: Terrazzo/Marble Mason.......$ 52.23 Tile, Terrazzo, Marble: Finisher....................$ 39.49 15.18

SANV2025-002 06/15/2026

Rates Fringes Ironworker: Journeyman .............................$ 51.85 39.12 Electrician-Wireman: Wireman........................$ 60.83 30.09 Electrician-Wireman: Cable Splicer..................$ 61.33 30.11 Electrician-Communication Technician:

Communication-Installer/Technician..................$ 42.34 23.70 Alarm Installer: Alarm Installer....................$ 60.48 30.08

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year.

Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is a victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at https://www.dol.gov/agencies/whd/government-contracts.

Note: Executive Order 13658 generally applies to contracts subject to the Davis-Bacon Act that were awarded on or between January 1, 2015 and January 29, 2022, and that have not been renewed or extended on or after January 30, 2022. Executive Order 13658 does not apply to contracts subject only to the Davis-Bacon Related Acts regardless of when they were awarded. If a contract is subject to Executive Order 13658, the contractor must pay all covered workers at least $13.65 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract from May 11, 2026, through December 31, 2026. The applicable Executive Order minimum wage rate will be adjusted annually.

Additional information on contractor requirements and worker protections under Executive Order 13658 is available at www.dol.gov/whd/govcontracts.

Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses (29CFR 5.5 (a) (1) (iii)).

The body of each wage determination lists the classifications and wage rates that have been found to be prevailing for the type(s) of construction and geographic area covered by the wage determination. The classifications are listed in alphabetical order under rate identifiers indicating whether the particular rate is a union rate (current union negotiated rate), a survey rate, a weighted union average rate, a state adopted rate, or a supplemental classification rate.

Union Rate Identifiers

A four-letter identifier beginning with characters other than SU, UAVG, SA, or SC denotes that a union rate was prevailing for that classification in the survey. Example:

PLUM0198-005 07/01/2024. PLUM is an identifier of the union whose collectively bargained rate prevailed in the survey for this classification, which in this example would be Plumbers.

0198 indicates the local union number or district council number where applicable, i.e., Plumbers Local 0198. The next number, 005 in the example, is an internal number used in processing the wage determination. The date, 07/01/2024 in the example, is the effective date of the most current negotiated rate.

Union prevailing wage rates are updated to reflect all changes over time that are reported to WHD in the rates in the collective bargaining agreement (CBA) governing the classification.

Union Average Rate Identifiers

The UAVG identifier indicates that no single rate prevailed for those classifications, but that 100% of the data reported for the classifications reflected union rates. EXAMPLE:

UAVG-OH-0010 01/01/2024. UAVG indicates that the rate is a weighted union average rate. OH indicates the State of Ohio.

The next number, 0010 in the example, is an internal number used in producing the wage determination. The date, 01/01/2024 in the example, indicates the date the wage determination was updated to reflect the most current union average rate.

A UAVG rate will be updated once a year, usually in January, to reflect a weighted average of the current rates in the collective bargaining agreements on which the rate is based.

Survey Rate Identifiers

The SU identifier indicates that either a single non-union rate prevailed (as defined in 29 CFR 1.2) for this classification in the survey or that the rate was derived by computing a weighted average rate based on all the rates reported in the survey for that classification. As a weighted average rate includes all rates reported in the survey, it may include both union and non-union rates. Example: SUFL2022-007 6/27/2024. SU indicates the rate is a single non-union prevailing rate or a weighted average of survey data for that classification. FL indicates the State of Florida. 2022 is the year of the survey on which these classifications and rates are based. The next number, 007 in the example, is an internal number used in producing the wage determination. The date, 6/27/2024 in the example, indicates the survey completion date for the classifications and rates under that identifier.

SU wage rates typically remain in effect until a new survey is conducted. However, the Wage and Hour Division (WHD) has the discretion to update such rates under 29 CFR 1.6(c)(1).

State Adopted Rate Identifiers

The SA identifier indicates that the classifications and prevailing wage rates set by a state (or local) government were adopted under 29 C.F.R 1.3(g)-(h). Example: SAME2023-007 01/03/2024. SA reflects that the rates are state adopted. ME refers to the State of Maine. 2023 is the year during which the state completed the survey on which the listed classifications and rates are based. The next number, 007 in the example, is an internal number used in producing the wage determination.

The date, 01/03/2024 in the example, reflects the date on which the classifications and rates under the SA identifier took effect under state law in the state from which the rates were adopted.

WAGE DETERMINATION APPEALS PROCESS

1) Has there been an initial decision in the matter? This can be:

a) a survey underlying a wage determination

b) an existing published wage determination

c) an initial WHD letter setting forth a position on a wage determination matter

d) an initial conformance (additional classification and rate) determination On survey related matters, initial contact, including requests for summaries of surveys, should be directed to the WHD Branch of Wage Surveys. Requests can be submitted via email to davisbaconinfo@dol.gov or by mail to:

Branch of Wage Surveys Wage and Hour Division U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210 Regarding any other wage determination matter such as conformance decisions, requests for initial decisions should be directed to the WHD Branch of Construction Wage Determinations.

Requests can be submitted via email to BCWD-Office@dol.gov or by mail to:

Branch of Construction Wage Determinations Wage and Hour Division U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

2) If an initial decision has been issued, then any interested party (those affected by the action) that disagrees with the decision can request review and reconsideration from the Wage and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR Part 7).

Requests for review and reconsideration can be submitted via email to dba.reconsideration@dol.gov or by mail to:

Wage and Hour Administrator U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210 The request should be accompanied by a full statement of the interested party's position and any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.

3) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative Review Board (formerly the Wage Appeals Board). Write to:

Administrative Review Board U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210.

END OF GENERAL DECISION