220529-RIB-Hangers and Supports for Plumbing Piping and Equipment-12-24-2025.pdf
PDF 58 KB Posted
- Attached to
- CBI GJ HVAC/Lighting Upgrade Project
- Solicitation number
- IFB1 REAA 2027000043 4
- Issued by
- Denver County, Denver City, Colorado
About this file
This is a specification document for Section 220529 – Hangers and Supports for Plumbing Piping and Equipment, part of Project 25-388 CBI HVAC and Lighting Upgrade. The section outlines the technical requirements, standards, and installation procedures for providing hardware to hang or support piping, equipment, and fixtures in plumbing systems. The specification requires compliance with multiple ASTM standards for zinc coatings and galvanizing (ASTM A123/A123M, A153/A153M, and B633), MSS SP-58 standards for pipe hanger selection and installation, and UL 723 standards for surface burning characteristics. Products must include metal channel strut framing systems, nonpenetrating rooftop supports, post-installed concrete and masonry anchors, and thermal insulated pipe supports. Contractors must submit manufacturer's product data and shop drawings for fabricated hangers and supports, with detailed application specifications for protective inserts, saddles, and shields appropriate to each insulation type.
Installation requirements mandate adherence to manufacturer's instructions and verification of field measurements and mounting surfaces prior to work commencement. All materials must be corrosion-resistant, with zinc-plated steel electroplated per ASTM B633 and galvanized steel hot-dip galvanized per ASTM A123/A123M or A153/A153M. Field quality control procedures require inspection of all support and attachment components for damage and defects, with defective components to be replaced and any cuts or abrasions in galvanized finishes repaired using zinc-rich paint recommended by the manufacturer. No pricing, award dates, bid due dates, or contract term information is provided in this specification document.
View the file
Other files
Show all 44
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
25-388 CBI HVAC and Lighting Upgrade 220529 - 1 Hangers and Supports for
Plumbing Piping and Equipment
SECTION 220529
HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT
PART 1 GENERAL
1.01 SECTION INCLUDES
1.02 RELATED REQUIREMENTS
A. Section 055000 - Metal Fabrications.
1.03 REFERENCE STANDARDS
A. ASTM A123/A123M - Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products; 2024.
B. ASTM A153/A153M - Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware; 2023.
C. ASTM B633 - Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel;
2023.
D. ASTM E84 - Standard Test Method for Surface Burning Characteristics of Building Materials;
2024.
E. ASTM E96/E96M - Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials; 2024a.
F. MSS SP-58 - Pipe Hangers and Supports - Materials, Design, Manufacture, Selection, Application, and Installation; 2025.
G. UL 723 - Standard for Test for Surface Burning Characteristics of Building Materials; Current Edition, Including All Revisions.
1.04 SUBMITTALS
A. See Section 013000 - Administrative Requirements for submittal procedures.
B. Product Data: Provide manufacturer's standard catalog pages and data sheets for metal channel (strut) framing systems, nonpenetrating rooftop supports, post-installed concrete and masonry anchors, and thermal insulated pipe supports.
C. Shop Drawings: Include details for fabricated hangers and supports where materials or methods other than those indicated are proposed for substitution.
1. Application of protective inserts, saddles, and shields at pipe hangers for each type of insulation and hanger.
1.05 DELIVERY, STORAGE, AND HANDLING
A. Receive, inspect, handle, and store products in accordance with manufacturer's instructions.
PART 2 PRODUCTS
2.01 GENERAL REQUIREMENTS
A. Provide required hardware to hang or support piping, equipment, or fixtures with related accessories as necessary to complete installation of plumbing work.
B. Provide hardware products listed, classified, and labeled as suitable for intended purpose.
C. Materials for Metal Fabricated Supports: Comply with Section 055000.
1. Zinc-Plated Steel: Electroplated in accordance with ASTM B633 unless stated otherwise.
2. Galvanized Steel: Hot-dip galvanized in accordance with ASTM A123/A123M or ASTM
A153/A153M unless stated otherwise.
D. Corrosion Resistance: Use corrosion-resistant metal-based materials fully compatible with exposed piping materials and suitable for the environment where installed.
PART 3 EXECUTION
3.01 EXAMINATION
25-388 CBI HVAC and Lighting Upgrade 220529 - 2 Hangers and Supports for
Plumbing Piping and Equipment
A. Verify that field measurements are as indicated.
B. Verify that mounting surfaces are ready to receive support and attachment components.
C. Verify that conditions are satisfactory for installation prior to starting work.
3.02 INSTALLATION
A. Install products in accordance with manufacturer's instructions.
3.03 FIELD QUALITY CONTROL
A. See Section 014000 - Quality Requirements for additional requirements.
B. Inspect support and attachment components for damage and defects.
C. Repair cuts and abrasions in galvanized finishes using zinc-rich paint recommended by manufacturer. Replace components that exhibit signs of corrosion.
D. Correct deficiencies and replace damaged or defective support and attachment components.
END OF SECTION
220529 - Hangers and Supports for Plumbing Piping and Equipment
File details come from the government source that posted it. Updated .