2025-08-20_West_Sac_Combined_Luminaire_Catalog_Pages_90%_CD.pdf

PDF 13 MB Posted Apr 6, 2026

Attached to: City Hall Outdoor Plaza | Construction
Solicitation number: 26-009-ITB
Issued by: Yolo County, California

About this file

Written by GovTribe AI · Apr 27, 2026

This is a luminaire catalog specification document from Selux Corporation for the M60 LED Direct/Indirect fixture series, along with supplementary LED strip and lighting component specifications from JESCO Lighting Group and other manufacturers, prepared for the City of West Sacramento's City Hall Outdoor Plaza construction project. The catalog documents provide comprehensive technical specifications, performance data, mounting options, driver configurations, sensor compatibility, and customization details for various LED lighting products that may be incorporated into the plaza's site lighting and electrical systems. The M60 fixture specifications include available lengths from 2 feet to 12 feet with direct and indirect lighting capabilities, multiple lens options (LED Optimized White, Clear Microprism, and LMO variants), mounting methods (cable, stem, and wall mount), and various driver options ranging from basic 0-10V dimming to advanced Lutron EcoSystem and eldoLED drivers. Additional specifications cover JESCO DL-FLEX2-SHE super high-efficacy LED strips (achieving up to 165 lm/W), H.E. Williams 75R and 75S LED narrow strip fixtures, ALW Nova/3 square direct illumination downlights, and OPTOTRONIC OTi 25W programmable LED drivers with dimming capabilities down to 1 percent. All products feature 90+ CRI color rendering, multiple color temperature options (2700K through 5000K), and compatibility with various control systems including wireless sensors, occupancy detection, and daylight harvesting capabilities.

The luminaire specifications indicate standard 5-year limited warranties on LED components with lumen maintenance predictions exceeding 60,000 hours at 90 percent output and L70 ratings greater than 72,000 hours under standard conditions. All products comply with relevant safety certifications including UL and CSA standards for dry and damp location installations, with operating temperature ranges typically from -30°C to 50°C ambient conditions. The specifications include detailed photometric data, efficacy ratings, wattage consumption information organized by fixture length and driver configuration, and comprehensive compatibility charts for various dimming protocols and sensor systems. The documentation provides extensive ordering information with code examples, fixture performance multipliers for different color temperatures and CRI ratings, and installation guidance for field assembly, cable suspension, stem mounting, and wall bracket configurations. Pricing and procurement terms are not detailed within these product specification documents, which serve as reference materials for the project's design and construction phases rather than bid pricing information.

View the file

Other files

File	Type	Posted
City_Hall_Outdoor_Plaza_\|_Construction_(Addendum_#2_Revision).pdf	PDF	May 11, 2026
ADDENDUM-1-2026_05_06_West_Sac_Plaza_Sheet_Set_Compiled_Set.pdf	PDF	May 8, 2026
West_Sac_Plaza_Compiled_Specifications.pdf	PDF	May 7, 2026
Geotech_Reoport_November_2024_4588.x_WS_City_Hall_Outdoor_Plaza_RCP.pdf	PDF	May 7, 2026
Exit_Light_Mounting_and_Location_Details.pdf	PDF	May 7, 2026
2025-08-20_West_Sac_Combined_Luminaire_Catalog_Pages_90%_CD.pdf	PDF	May 7, 2026
26-009-ITB_City_Hall_Outdoor_Plaza_Construction_Bid_Packet.docx	DOCX document	May 1, 2026
Exit_Light_Mounting_and_Location_Details.pdf	PDF	Apr 24, 2026
City_Hall_Outdoor_Plaza_\|_Construction.pdf	PDF	Apr 6, 2026
West_Sac_Plaza_Compiled_Specifications.pdf	PDF	Apr 6, 2026
26-009-ITB_City_Hall_Outdoor_Plaza_Construction_Bid_Packet.docx	DOCX document	Apr 6, 2026
Insurance_Checklist_-_2Million_4Million.pdf	PDF	Apr 6, 2026
2025-08-20_West_Sac_Combined_Luminaire_Catalog_Pages_90%_CD.pdf	PDF	Apr 6, 2026
2026_01_07_West_Sac_Plaza_Sheet_Set_Compiled_Set.pdf	PDF	Apr 6, 2026
Geotech_Reoport_November_2024_4588.x_WS_City_Hall_Outdoor_Plaza_RCP.pdf	PDF	Apr 6, 2026
City_Hall_Outdoor_Plaza_Project_-_4-3-26.pdf	PDF	Mar 30, 2026
Contract_for_Services_(West_Sacramento)_-_Federal_Boilerplate_for_RFP_5.1.24.docx	DOCX document	Jan 28, 2026
FHWA_1273_Federal_Aid_Construction_Contract_Provisions_Oct_2023.docx	DOCX document	Jan 28, 2026

Show all 18

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

4340 Redwood Hwy., Suite 245, San Rafael CA 94903

West Sacramento City Hall

Plaza Workspace

Luminaire Catalog Pages

90% CD

August 20. 2025

4340 Redwood Hwy., Suite 245, San Rafael CA 94903

Disclaimer:

The information contained within this luminaire product data package is for reference only. Not all features or options shown on the luminaire product data sheets are included in this project. Please refer to the luminaire schedule for specified product features and options.

Highlighted options are available in standard 4-week lead times from release of order. For other options including mixed orders, consult factory for lead times.

(Rev. 10/2024) L60DI_SS_v4.3

In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.

Project:

Type: Qty:

Date: Customer:

M60 LED Direct/Indirect

Clear Lens with Microprism

LMO Symmetric with Satine Lens

A2 LMO Asymmetric 20° Wall Washer with Satine Lens

LMO

Batwing with Satine Lens

A5 LMO Asymmetric 5° Wall Grazer with Satine Lens

Clear Lens with Microprism

LMO Wide Batwing

3 See page 9 for details.

* For mixed mountings consult factory.

AWN

Lutron Athena Wireless Node ready (consult factory)

DC3

Lutron 1% 3-Wire (consult factory)

Casambi Enabled (consult factory)

Order Code:

Series L6DI M60 LED Direct/Indirect

L6DI

*�Custom colors are available, please consult factory.

Emergency Options

EC6,7

Emergency Circuit Wiring

6 See page 9 for details.

7 For emergency options with sensors please consult factory.

8 �4’ available with DIM driver only. ≥6’ available with all driver options.

* �Values calculated from a 4’ fixture at 3500K, 90+ CRI using LW shielding and DIM driver.

For additional information please see page 2.

* � �Mixed outputs available 4’ and up.

Configuration Options

Direct Light Engine

CCT 930

3000K

90+ CRI

3500K

90+ CRI

4000K

90+ CRI

Direct Shielding

LED Optimized White Lens

Mounting C Cable

S Swivel Stem

Rigid Stem

W Wall Mount

Nominal Fixture Length

2 ft.

4 ft.

3 ft.

5 ft.

6 ft.

8 ft.

7 ft.

Runs (over 12’) are available in 1’ nominal increments, round up to the nearest foot and replace the “xx” with the # (i.e. 13=13’ nominal).

Finish WH White

Silver

Specify Premium Color

Voltage 1 120 Volt

277 Volt

LED WARRANTY

YEAR

ARRA

Compliant

ADA

Compliant

2700K

90+ CRI

9 ft.

11 ft.

10 ft.

12 ft.

U 120 through 277 50/60hz capable

Indirect Light Engine

Indirect Shielding

LED Optimized white lens

Individual fixtures, Runs, and Configurations are supplied in nominal lengths to ensure full, even, illumination. See pages 2 through 5 for additional details.

FS3

In-Line Fuse

Fixture Options

DE11,2

Lutron 1% Eco-System

1 See page 6 for details.

2 EM option not available in 4’ length.

Driver DIM1 0-10V 1% (Linear)

Sensor Options xE4,5 Enlighted xS14,5 Sensor Switch Daylight xS24,5 Sensor Switch Occ/Vac xS34,5 Sensor Switch Occ/Vac/ Daylight

4 �Minimum fixture length 2’.

See page 10 for full details.

5 Requires DIM driver (0-10V).

Replace “x” with quantity

347 Volt (consult factory) xSN nLight enabled (consult factory)

Semi-Matte Black

EMR

Remote Micro Inverter (consult factory)

EM6,7,8

Integral EM Battery Pack xV Lutron Vive (consult factory)

3000K

80+ CRI

2700K

80+ CRI

3500K

80+ CRI

4000K

80+ CRI

DL011,2

eldoLED 0.1% SOLOdrive 0-10V (Logarithmic)

DED1,2

eldoLED 1% ECOdrive DALI-2 (Logarithmic)

D011,2 eldoLED 0.1% SOLOdrive 0-10V (Linear)

DIL1,2

eldoLED 1% ECOdrive 0-10V (Logarithmic)

RGBW

(consult factory)

* See page 11 for details.

1C45 80CRI-1018lm 90CRI-855lm 11.1W per foot

1C40 80CRI-954lm 90CRI-802lm 9.9W per foot

1C35 80CRI-834lm 90CRI-701lm 8.7W per foot

1C30 80CRI-746lm 90CRI-627lm 7.3W per foot

1C25 80CRI-594lm 90CRI-500lm 6.1W per foot

1C20 80CRI-494lm 90CRI-415lm 4.9W per foot

1C45 80CRI-1018lm 90CRI-855lm 11.1W per foot

1C40 80CRI-954lm 90CRI-802lm 9.9W per foot

1C35 80CRI-834lm 90CRI-701lm 8.7W per foot

1C30 80CRI-746lm 90CRI-627lm 7.3W per foot

1C25 80CRI-594lm 90CRI-500lm 6.1W per foot

1C20 80CRI-494lm 90CRI-415lm 4.9W per foot

BUY

AMERICAN

T9 Lit “T” section 90° Corner

X9 Lit “X” section 90° Corner

L9 Lit Horizontal 90° Corner

Lit “T” section Custom Angle Corners (consult factory)

Lit “X” section Custom Angle Corners (consult factory)

Lit Horizontal Custom Angle Corners (consult factory)

SS3

Separate Switching

Custom Switching (consult factory)

AH1

Luminaire Type

AA1

confirm with architect

(Rev. 10/2024) L60DI_SS_v4.3

4 3/4” (120mm)

2 1/4”(56mm)

2 3/8” (60mm)

Construction:

Housing - Continuous, low copper 6063-T6 extruded aluminum profile with aluminum endcaps, available as Individual fixtures (up to 12’) or Runs.

Geartray - Low copper 6063-T6 extruded aluminum profile.

Shielding - Extruded, impact resistant acrylic lens:

- LED Optimized White Lens (LW)

- Clear Lens with Microprism (MI)

- “LMO” Wide Batwing (WB) - Indirect Only

(Recommended mounting distance from ceiling

to top of luminaire for WB lens is 24” or greater

for best optical performance).

Direct only:

“LMO” refers to the Selux proprietary LED optical system - Light modulation optics. These lenses (other than WB) are offered in M60 behind a Satine Lens for even illumination and comfortable lit appearance.

- “LMO” Symmetric Lens (NB)

- “LMO” Asymmetric 20° Wall Washer (A2)

- “LMO” Asymmetric 5° Wall Grazer (A5)

- “LMO” Batwing (BW)

Mounting(s)- 1/16” Aircraft Cable, Ø5/8” Swivel or Rigid Steel Stem, Wall Bracket, (see pages 3 through 5 for details).

** Cable, Stem and Wall mountings may not be symmetrical for Runs and Configurations due to the use of modular housing lengths. If symmetrical suspensions are required please consult the factory.

** Mixed mountings are possible - consult factory.

Standard Luminaire lengths - All standard luminaires are supplied in nominal lengths to ensure full, even, illumination. Runs and Configurations are available in approximately 1’ increments starting at the nominal 12’ fixture length.

** Individual luminaires are not joinable in the field.

Exact length luminaires - Individual luminaires, Runs, and Configurations are available in exact lengths to meet your project needs. Please consult factory with you requirements.

** Lens luminance may soften at the very ends of the straight sections for exact length luminaires.

L60 Joiner(s) - Runs and Configurations are supplied in multiple housings that are joined together in the field using the supplied L60 Joining System. This allows ease of installation and ensures a uniform appearance (see page 9 for details).

Weight: 2.8 lb. per foot.

Electrical/Performance:

LED Light Engine - Brand-name mid-power LEDs create a high efficiency LED light engine able to provide a lumen maintenance of 95% at 25,000 hours and 90% at 60,000 hours at 25ºC per TM-21 reports. Reported L70 greater than 60,000 hours.

Photometrics - Consult website or factory for IES Files. Independent photometric lumen measurement complies with IES LM-79-08 testing procedures. Due to the LED manufacturer’s tolerances, the listed output has a ±5% tolerance.

For outputs based on different optics or CCT, please see page 12 for details.

CCT - Available in 2700K, 3000K, 3500K and 4000K, tolerance within a 3-step MacAdam ellipse.

CRl - 90+ and 80+ CRI.

All Drivers - High efficiency, constant current, soft start, Electronic Class 2 with a PFC>0.90. For more detailed information on the available drivers please see page 6.

Sensors - Selux offers a variety of integral sensor options. Sensors are placed on the direct side of the fixture, but can control the Indirect lighting. For details and specifications, please refer to page 10.

Emergency - There are multiple emergency options available - Emergency Circuit, Remote Micro Inverter, and EM Integral Battery Pack.

Please consult factory for use of sensors with emergency options. For more details on EC and EM options, see page 9.

Thermal Performance:

Ambient Operating Temperature - Luminaires suitable for maximum ambient temperature of 25°C (77°F) for DE1 at 1C40 and 1C45 light engines; 35°C (95°F) for all others.

Luminaires are suitable for minimum ambient temperatures of -40ºC (-40ºF) for DIM, DIL, DED, D01, and DL01 drivers; 0ºC (32ºF) for DE1 drivers.

Luminaire Finish:

Powder Coat - All Selux luminaires are finished in high quality polyester powder coating in our Tiger Drylac certified facility and are tested in accordance with test specifications for coatings from ASTM and PCI.

All products undergo a five stage intensive pretreatment process where product is thoroughly cleaned, phosphated, and sealed. Selux powder coated products provide excellent salt and humidity resistance as well as ultra violet resistance for color retention.

Standard interior colors are White (WH), Semi-Matte Black (BL), and Silver (SV). Selux premium colors (SP) are available, please specify from your Selux color selection guide.

Warranty:

5 Year Limited LED Luminaire Warranty - Selux offers a 5 Year Limited Warranty to the original purchaser that the M60 LED luminaire shall be free from defects in material and workmanship for up to five (5) years from date of shipment. This limited warranty covers the LED driver and LED light engine when installed according to Selux instructions and operated within the Ambient Temperature. For additional details and exclusions, see “Selux Terms and Condition of Sale.”

Certifications and Compliance:

NRTL - For Dry and Damp Locations (I.E. cULus; cCSAus) ADA Compliant ARRA Compliant RoHS Compliant

LW Direct LW Indirect

LW Direct LMO WB Indirect

4 3/4” (120mm)

2 3/8” (60mm)

M60 LED Direct/Indirect

For Indirect WB option, the geartray is painted White for highest efficiency. For other colors, please consult factory.

M60 LED Direct/Indirect

Cable Mounting (C)

Outlet box for feed only (by others)

L6DI Cable (C) Suspension Detail (Feed location(s) only)

L6DI Cable (C) Suspension Detail (Non-Feed location(s) only)

Cross bar with 1/4”-20 rod and ground screw

1/4” x 5” diameter canopy (White)

2x White cable stay

Cord strain relief bushing

1/4”-20 Threaded rod (supplied and installed in the field by others)

1. �Ø 1/16” Aircraft Cable with chrome gripper for easy adjustment (48” max. from ceiling to luminaire).

2x Outlet box screws (by others)

1/4”-20 Slip ring coupler

Feed cord (White)

1/16” Aircraft cable

1/4”-20 Slip ring coupler

1/16” Aircraft cable

Chrome gripper

Luminaire

1/4” x 2” diameter canopy (White)

Chrome gripper

Luminaire

Cable Mounting (C)

Min. 5/8” to Max. 3/4” m a x Cable Mounting (C) - Dimensions

Nominal Length

“A” Housing Length

* “B” (Ref.)

End Suspensions

“C” Mid. Suspension

“D” Feed Location

“E” Illuminated Length

Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM

02 (2ft.) 2' - 1/4" 616 0' - 7/8" 22 1' - 10 1/2" 572 0' - 3/8" 9 1' - 9" 534

03 (3ft.) 3' - 1/4" 921 0' - 7/8" 22 2' - 10 1/2” 876 0' - 3/8" 9 2' - 9" 839

04 (4ft.) 4' - 1/4" 1225 0' - 7/8" 22 3' - 10 1/2” 1181 0' - 3/8" 9 3' - 9" 1144

05 (5ft.) 5' - 1/4" 1530 0' - 7/8" 22 4' - 10 1/2” 1486 0' - 3/8" 9 4' - 9" 1448

06 (6ft.) 6' - 1/4" 1835 0' - 7/8" 22 5' - 10 1/2” 1791 0' - 3/8" 9 5' - 9" 1753

07 (7ft.) 7' - 1/4" 2140 0' - 7/8" 22 6' - 10 1/2” 2096 0' - 3/8" 9 6' - 9" 2058

08 (8ft.) 8' - 1/4" 2445 0' - 7/8" 22 7' - 10 1/2” 2400 0' - 3/8" 9 7' - 9" 2363

09 (9ft.) 9' - 1/4" 2749 0' - 7/8" 22 8' - 10 1/2” 2705 0' - 3/8" 9 8' - 9" 2668

10 (10ft.) 10' - 1/4" 3054 0' - 7/8" 22 9' - 10 1/2” 3010 0' - 3/8" 9 9' - 9" 2972

11 (11ft.) 11' - 1/4" 3359 0' - 7/8" 22 10' - 10 1/2” 3315 0' - 3/8" 9 10' - 9" 3277

12 (12ft.) 12' - 1/4" 3664 0' - 7/8" 22 11' - 10 1/2” 3620 0' - 3/8" 9 11' - 9" 3582

*Dimension(s) rounded to the nearest 1/16” with a ± 1/16” (1mm) tolerance.

M60 LED Direct/Indirect

Stem Mounting (S and RS)

Outlet box (supplied and installed by others)

L6DI Swivel Stem (S) Suspension Detail (feed wires through stem supplied by others)

L6DI Rigid Stem (RS) Suspension Detail (feed wires through stem supplied by others)

Hemispherical assembly

3/8” IP Crossbar with ground screws

1 7/16” x 5” diameter canopy (White)

1. �Ø 5/8” Swivel Stem provides 30° swivel and can be cut in field (48” max. from ceiling to luminaire).

2. �Ø 5/8” Rigid Stem is fixed and is not able to be cut/adjusted in field (48” max. from ceiling to luminaire).

Cotter pin

3/8” IP steel swivel stem (White)

Luminaire

Outlet box (supplied and installed by others)

3/8” IP nipple (supplied and installed by others)

Suspension hickey

1/4” x 5” diameter Canopy (White)

Canopy securing screw

Swivel Stem (S) and Rigid Stem (RS) Mounting

8” m a x

Dress nut

Square nut

3/8” IP steel stem (White)

Dress nut

Swivel (S) & Rigid Stem (RS) Mountings - Dimensions

Nominal Length

“A” Housing Length

* “B” (Ref.)

End Suspensions

“C” Mid. Suspension

“D” Feed Location

“E” Illuminated Length

Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM

02 (2ft.) 2' - 1/4" 616 0' - 7/8" 22 1' - 10 1/2" 572 0' - 7/8" 22 1' - 9" 534

03 (3ft.) 3' - 1/4" 921 0' - 7/8" 22 2' - 10 1/2” 876 0' - 7/8" 22 2' - 9" 839

04 (4ft.) 4' - 1/4" 1225 0' - 7/8" 22 3' - 10 1/2” 1181 0' - 7/8" 22 3' - 9" 1144

05 (5ft.) 5' - 1/4" 1530 0' - 7/8" 22 4' - 10 1/2” 1486 0' - 7/8" 22 4' - 9" 1448

06 (6ft.) 6' - 1/4" 1835 0' - 7/8" 22 5' - 10 1/2” 1791 0' - 7/8" 22 5' - 9" 1753

07 (7ft.) 7' - 1/4" 2140 0' - 7/8" 22 6' - 10 1/2” 2096 0' - 7/8" 22 6' - 9" 2058

08 (8ft.) 8' - 1/4" 2445 0' - 7/8" 22 7' - 10 1/2” 2400 0' - 7/8" 22 7' - 9" 2363

09 (9ft.) 9' - 1/4" 2749 0' - 7/8" 22 8' - 10 1/2” 2705 0' - 7/8" 22 8' - 9" 2668

10 (10ft.) 10' - 1/4" 3054 0' - 7/8" 22 9' - 10 1/2” 3010 0' - 7/8" 22 9' - 9" 2972

11 (11ft.) 11' - 1/4" 3359 0' - 7/8" 22 10' - 10 1/2” 3315 0' - 7/8" 22 10' - 9" 3277

12 (12ft.) 12' - 1/4" 3664 0' - 7/8" 22 11' - 10 1/2” 3620 0' - 7/8" 22 11' - 9" 3582

*Dimension(s) rounded to the nearest 1/16” with a ± 1/16” (1mm) tolerance.

MODIFIED 4" canopy / j-box cover

0'-4"0'-8"

0'-3"

Power fed through 4" x 8" tube steel j-box above luminaire feeds and fans conduit from power pole feed at ends of cabinets

M60 LED Direct/Indirect

1. �Aluminum wall bracket (by Selux).

2. �4”x4” or 2”x4” J-Box at feed location (supplied and installed by others).

3. �1/4”-20 Threaded rod, 1/4”-20 lock washer and 1/4”-20 nut required to anchor the wall bracket. Mounting hardware supplied and installed to code by others.

Wall Mount (W) (Covers a 4x4 or 2x4 J-Box)

4” (102mm)

1”

(25mm)

3 3/8” (85mm)

Wall Mounting (W)

For patterns and configurations that include a wall mounted option, please see page 11 for details.

Wall (W) Mount - Dimensions

Nominal Length

“A” Housing Length

* “B” (Ref.)

End Suspensions

“C” Mid. Suspension

“D” Feed Location

Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM

02 (2ft.) 2' - 1/4" 616 0' - 6 1/8" 156 1' - 0" 305 0’ - 6 1/8” 156

03 (3ft.) 3' - 1/4" 921 0’ - 6 1/8” 156 2' - 0" 610 0’ - 6 1/8” 156

04 (4ft.) 4' - 1/4" 1225 0’ - 6 1/8” 156 3' - 0" 915 0’ - 6 1/8” 156

05 (5ft.) 5' - 1/4" 1530 0’ - 6 1/8” 156 4' - 0" 1220 0’ - 6 1/8” 156

06 (6ft.) 6' - 1/4" 1835 0’ - 6 1/8” 156 5' - 0" 1524 0’ - 6 1/8” 156

07 (7ft.) 7' - 1/4" 2140 0’ - 6 1/8” 156 6' - 0" 1829 0’ - 6 1/8” 156

08 (8ft.) 8' - 1/4" 2445 0’ - 6 1/8” 156 7' - 0" 2134 0’ - 6 1/8” 156

09 (9ft.) 9' - 1/4" 2749 0’ - 6 1/8” 156 8' - 0" 2439 0’ - 6 1/8” 156

10 (10ft.) 10' - 1/4" 3054 0’ - 6 1/8” 156 9' - 0" 2744 0’ - 6 1/8” 156

11 (11ft.) 11' - 1/4" 3359 0’ - 6 1/8” 156 10' - 0" 3048 0’ - 6 1/8” 156

12 (12ft.) 12' - 1/4" 3664 0’ - 6 1/8” 156 11' - 0" 3353 0’ - 6 1/8” 156

*Dimension(s) rounded to the nearest 1/16” with a ± 1/16” (1mm) tolerance.

M60 LED Direct/Indirect

Drivers:

*For inrush and control current, please refer to the driver manufacturers’ spec sheets.

Driver Quantity

Light Engine Dimming Code Length

2ft 3ft 4ft 5ft 6ft 7ft 8ft 9ft 10ft 11ft 12ft

1C20

DIM/DIL

1 2 4 2

D01/DL01/DED/DE1

1C25

DIM/DIL

1 2 4 2

D01/DL01/DED/DE1

1C30

DIM/DIL

1 2 4

D01/DL01/DED/DE1

1C35

DIM/DIL

1 2 4

D01/DL01/DED/DE1

1C40

DIM/DIL/DE1

1 2

4 6

D01/DL01/DED 2

1C45

DIM/DIL/DE1

1 2

1 4

4 6

D01/DL01/DED 2 4

0-10V linear dimming (DIM) Luminaires supplied with drivers offering the capability of either normal switched operation of 0-10V dimming for linear dimming curve. Fixtures ship wired for dimming. For on/off functionality, simply cap the dimming leads. Minimum dimming level preset at factory to 1%.

0-10V logarithmic eldoLED ECOdrive dimming (DIL) Luminaires supplied with drivers offering the capability of either normal switched operation of 0-10V dimming for logarithmic dimming curve, Fixtures shipped wired for dimming. For on/off functionality, simply cap the dimming leades. Minimum dimming level preset at factory to 1%.

eldoLED ECOdrive DALI-2 dimming (DED) Luminaires supplied with ECOdrive DALI-2 dimming driver with logarithmic dimming curve. Minimum dimming level preset at factory to 1%. For “dim to dark” (down to 0.1%), please consult factory.

eldoLED SOLOdrive 0-10V linear dimming (D01) Luminaires supplied with SOLOdrive 0-10V dimming driver with linear dimming curve. Minimum dimming level preset at factory to 0.1% and “dim to dark”.

eldoLED SOLOdrive 0-10V logarithmic dimming (DL01) Luminaires supplied with SOLOdrive 0-10V dimming driver with logarithmic dimming curve. Minimum dimming level preset at factory to 0.1% and “dim to dark”.

LUTRON EcoSystem dimming (DE1) Luminaires supplied with Hi-Lume EcoSystem (4 wire, digital link) dimming driver programmed for Constant Current Reduction (CCR). Minimum dimming level down to 1% with SoftOn/FadeToBlack.

* �For control recommendations, please contact driver manufacturer.

M60 LED Direct/Indirect

Wiring Diagrams

Sensor Wiring Diagrams

- The following wire(s) are in addition to the standard above -

DE1

0-10V linear (DIM) 0-10V logarithmic eldoLED ECOdrive (DIL) DALI logarithmic eldoLED ECOdrive (DED) 0-10V linear eldoLED SOLOdrive (D01) 0-10V logarithmic eldoLED SOLOdrive (DL01)

DIM, DIL, DED, D01, DL01

Lutron EcoSystem (DE1)

Lutron 2-Wire (DC2)

DC2

Standard Wiring supplied for all drivers

Green = Ground White = Neutral Black = Hot

Gray = (-) DALI or 0-10V Dimming Control Purple = (+) DALI or 0-10V Dimming Control

Violet = “E1” Digital Link Dimming Control Violet/White = “E2” Digital Link Dimming Control

No additional wires

Driver

Feed Green White Black

Grey (-) Purple(+)

Green White Black

Feed Green White Black Violet

Violet/White

Feed

Neutral

Hot 120/277V white white pink purple red black

Neutral Hot 120/277V

0-10V

AUX(+)

AUX(-)

Enlighted

Lutron Vive

Sensor Switch

Eldo 0-10V Driver black purple black red

E1(+) E2(-)

AC(+)

purple purple blue blue black white

AC OUT(+)

AC IN(+)

RJ45

0-10

Sensor

SU-5E-IL

Sensor Switch

MSD EZ7

Sensor

LED light Engine

DIM

Driver

Fixture Control Digital Interface

Lutron Vive

Control Unit

CU-4E-FM

Ecosystem Driver

S(+) S(-)

E1(+) E2(-)

M60 LED Direct/Indirect

Driver power chart - use below values to determine the nominal watts per foot based on driver, light engine, and voltage.

* Driver losses increase the wattage for fixtures less than 4 foot.

** Values are nominal values determined based on multiple tested fixtures.

Driver Power Usage

Driver Light Engine Nominal W/ft

120V 277V 347V

DIM, DIL, DED, D01,

DL01

1C20 4.9 5.3 n/a

1C25 6.1 6.5

1C30 7.3 7.7

1C35 8.7 8.9

1C40 9.9 10.1

1C45 11.1 11.3

DE1

1C20 5.5 5.2 n/a

1C25 6.7 6.3

1C30 8.0 7.6

1C35 9.3 8.8

1C40 10.5 10.0

1C45 11.7 11.2

DIM@347V

1C20 n/a n/a

5.4

1C25 6.5

1C30 7.7

1C35 8.8

1C40 10.0

1C45 11.2

EM all 6 n/a

M60 LED Direct/Indirect

Joiner System - standard for Runs and Configurations

Fuse (FS) - Fusing, luminaires supplied with a in-line fuse located on the hot wire for each feed (supplied with an 8A slow burn fuse).

Mixed Output - Luminaires have ability to offer mixed light engines (i.e. 1C35 direct and 1C25 indirect) starting at 4’.

Separate Switching (SS) - Luminaires available with separately switched 4’ (nominal) sections starting at 7’ and up. Luminaire is intended to be wired to the same panel/breaker (not intended for Emergency use).

Separate Switching between direct and indirect side is possible for all driver selections from 4’ and up. For Separate Switching of direct and indirect side for luminaires less than 4’, please consult factory.

*All separately switched (non-EM) circuits within an individual

luminaire, linear run, or configuration must be connected to the

same branch circuit on-site.

*To specify this option, the number of separately switched sections and locations of these sections must be provided at time of order.

*For Separate Switching with sensors, please consult factory.

Custom Switching (CS) - For project-specific switching requirements, please consult factory.

Emergency Wiring (EC) - EC luminaires are intended to be wired to separate panels/breakers for emergency use. See install instructions for proper wiring.

For 2’ to 6’ nominal luminaires, the entire fixture is wired for operation on emergency circuit.

For 7’ and up nominal luminaires, the first 4’ nominal length is wired for operation by a separate EM circuit by default to meet the required “Life Safety Code” (NFPA 101).

If a different configuration is needed, please consult factory.

Note: Wiring may vary slightly due to on-site conditions or local codes. Please follow all safety installation protocols contained within install instructions when installing luminaire.

Emergency Battery (EM) – The EM battery is located integral to fixture and is factory pre-wired. See install instructions for proper wiring.

10W constant power Emergency Battery Pack.

Direct fixtures are available for emergency battery (EM) use in 4’ and ≥6.

Due to size constraints, EM is not available in 5’ fixtures.

For individual fixtures, emergency option will illuminate the first 4’ section of fixture. For continuous runs, please consult factory to advise on 4’ section intended for emergency use. For fixtures >12’ or if a different configuration is needed, please consult factory.

Emergency test switch is located next to the geartray, behind the lens.

*	Emergency battery option is UNV for use with 120V or 277V and is not
	available for 347V.

* Please note battery pack requires an unswitched hot.

* For EM with sensors, please consult factory.

* If a different configuration is needed, please consult factory.

Note: Wiring may vary slightly due to on-site conditions or local codes.

Please follow all safety installation protocols contained within install instructions when installing luminaire.

M60 LED Direct/Indirect

Lens

Fixture Length

Lit Section* 3” (76mm)

Qty 1 Sensor - Beginning

2 3/8” (60mm)

Qty 3+ Sensor - For spacing between sensors, please consult the sensor manufacturer.

Beginning of Run

Aluminum Sensor Plate -to be painted same as fixture unless specified otherwise

Qty 2 Sensor - Beginning and End (9’ fixtures and longer)

Notes: 1. For spacing between sensors, please consult the sensor manufacturer.

2. Exact sensor placement and coverage will be defined by approved factory drawing.

3. Sections controlled by sensors may not be symmetrical - consult factory for layout.

*�Lit section will be the fixture length minus 3” for sensor plate.

Factory Presets - �Sensors come from the sensor manufacturer with factory presets for each of the settings in above chart. Please see sensor manufacturers’ spec sheets for details on presets and re-programming.

Commissioning - �Commissioning of sensors and installation by others. Contact sensor manufacturer for details and costs associated with commissioning the system prior to specification of sensors.

Standard Sensor Placement - for other placement options, please consult factory. For functionality and limitations, please see sensor details above.

Occupancy Vacancy Daylight Harvesting Driver Compatibility

Enlighted SU-5E-IL (E) √ √ √ DIM

Sensor Switch MSD EZ (S) √ √ √ DIM

Lutron Vive DFCSJ (V) √ √ √ DE1

Sensor Ordering Chart

Quantity Sensor Settings* x Number of Sensors E Enlighted SU-5E-IL

S Sensor Switch MSD EZ

V Lutron Vive DFCSJ

1 Daylight

2 Occupancy/Vacancy

3 Daylight/Occupancy/Vacancy

* Settings not available with Enlighted

Enlighted SU-5E-IL (E) Enlighted Micro Sensor SU-5E-IL (Independent Lighting) provided as standard with an Enlighted CU-4E-FM Fixture Mount Control Unit integral to fixture. If SU-5E-CL (Connected Lighting) or SU-5E-IoT (Internet of Things) is desired, please contact factory. Occupancy/vacancy, thermal, daylight sensing plus Tunable White, Room & Zone control, Internet of Things (IoT) data collection and reporting control. For full details, please see SU-5E-(IoT/ CL/IL) spec sheet on the Enlighted website. Must be paired with a 0-10V driver with auxiliary (DIM driver selection). Commissioning by Enlighted.

*Sensor can control up to 5 drivers. Please refer to driver quantity chart on page 6. Multiple sensors may be required for longer lengths.

Sensor Switch MSD EZ (S) Occupancy/vacancy and daylight harvesting. For full functionality and programming options, select settings option 3. If a different settings option is selected, other settings may be unavailable. For full details, please see MSD EZ spec sheets on the Sensor Switch website. Must be paired with DIM driver selection. Manual control of dimming not available with MSD EZ sensor.

*Sensor can control up to 30 drivers. Please refer to driver quantity chart on page 6. Multiple sensors may be required for longer lengths.

Lutron Vive DFCSJ (V) The DFCSJ-OEM-OCC provides the capabilities of daylight harvesting and occupancy/vacancy sensing. When integrated with the DFC-OEM-DBI (Fixture Contril Digital Link Interface), the sensor is wirelessly compatible with the DE1 Lutron EcoSystem driver. Commissioning bt certified Lutron technician.

*Vive DFCSJ sensor can control up to a maximum of five (5) drivers per sensor. Please refer to driver chart on page 6. Multiple sensors may be required for longer lengths.

Please contact controls manufacturer for details prior to specifying.

Listed below are the minimum lengths and details for standard shapes. These standard shapes can be combined with each other and/or the standard luminaire lengths, ensuring full even illumination. If you have any questions, please consult the factory.

The minimum standard lengths for “L” shapes:

- L9 open shapes is 4’ x 4’ nominal (example: leg, 90, leg)

- L9 closed shapes is 6’ x 6’ nominal (example: 90, leg, 90) (�Exception is that the L9 can be joined directly to provide a 4’ x 4’ nominal shape)

*For sensors in configurations, please consult factory.

M60 LED Direct/Indirect

Standard Direct/Indirect shapes/configurations (L9, T9, X9):

The minimum standard lengths for “T” and “X” shapes:

- T9 = 4’ nominal on the short leg and 8’ nominal on the long side

- X9 = 8’ nominal for either direction

For patterns and configurations that include a wall-mounted option, please consult factory to identify location, on which side of housing and spacing of brackets required.

Selux is capable of supplying a wide range of project solutions including different shapes, angles, and sizes to meet the project requirements.

Due to the complex nature of these project specific layout(s) we ask that you please consult the factory with the project requirements for review.

Project Specific Direct/Indirect shapes/configurations (LC, TC, XC):

Note: The indirect side of the cable and stem mounted con�gurations has small unlit sections for suspensions. For wall mounted con�gurations, the indirect side is fully lit.

Direct side Bottom view

See note See note See note

Indirect side Top view

Direct side Bottom view

L9 - Lit Horizontal Corner T9 - Lit “T” Section X9 - Lit “X” Section

M60 LED Direct/Indirect

Photometry

Note: Due to the amount of variation of lens/ distribution options possible, please import and align the individual direct and indirect IES files and group within the photometric program you are using.

CCT and CRI multipliers apply to the photometry, IES files, and per foot values listed on page 1 (light engine).

Lens multipliers supplied for per foot values listed on page 1 (light engine).

LW - LED Optimized White Lens

Light Engine Lumens per 4 foot Lumens per foot Input watts per foot lm/W

1C35 2804 701 8.9 79

MI - Clear Lens with Microprism Inlay

Light Engine Lumens per 4 foot Lumens per foot Input watts per foot lm/W

1C35 3251 813 8.9 92

NB - LMO Symmetric (Direct Only)

Light Engine Lumens per 4 foot Lumens per foot Input watts per foot lm/W

1C35 3002 751 8.9 85

A2 - LMO Asymmetric 20° Wall Washer (Direct Only)

Light Engine Lumens per 4 foot Lumens per foot Input watts per foot lm/W

1C35 3032 758 8.9 86

A5 - LMO Asymmetric 5° Wall Grazer (Direct Only)

Light Engine Lumens per 4 foot Lumens per foot Input watts per foot lm/W

1C35 2807 702 8.9 79

WB - LMO Wide Batwing (Indirect Only)

Light Engine Lumens per 4 foot Lumens per foot Input watts per foot lm/W

1C35 3926 982 8.9 111

M60 Direct/Indirect

CCT Multiplier

4000K 1.05

3500K 1.00

3000K 0.96

2700K 0.92

CRI Multiplier

90+ CRI 1.00

80+ CRI 1.19

Lens Multiplier

LW 1.00

MI 1.02

NB 1.22

A2 1.26

A5 1.26

BW 1.0

WB 1.40

BW - LMO Batwing (Direct Only)

Light Engine Lumens per 4 foot Lumens per foot Input watts per foot lm/W

1C35 2807 702 8.9 79

SUPER HIGH EFFICACY LED STRIP

24V DC LED STRIP

DL-FLEX2-SHE

NY CA15 Harbor Park Drive

Port Washington, NY 11050

Specifications subject to change without notice REV. 02/28/2024

800 527 7796 855 265 5768

800 527 7796 855 265 5768 support@jescolighting.com Tech Support 855 592 0029

219 South 6th Ave City of Industry, CA 91746

Main Fax

Project

Fixture Type

Notes

2700K

3000K

3500K

4000K

5000K

591 lm/ft

600 lm/ft

628 lm/ft

692 lm/ft

710 lm/ft

4.3 W/ft

137 lm/W

140 lm/W

146 lm/W

161 lm/W

165 lm/W

90+

PERFORMANCE

ORDERING INFO

COLOR TEMPERATURE

ORDERED BY THE FOOT

LUMEN WATTAGE EFFICACY CRI

2700K 3000K

Warm White

Neutral White

Cool White

3500K 4000K 5000K 2700K 3000K

Warm White

Neutral White

Cool White

3500K 4000K 5000K

JESCO Lighting's DL-FLEX2-SHE offers a market-leading efficacy of up to 165lm/W at 90CRI. The LED strip is field-cuttable every 2" and is made of highly flexible material that can be applied to most surfaces categorized as having high surface energy using 3M® double sided tape. An LED density of 54LEDs/ft ensure a diffused light output. The tape is dimmable using JESCO's various dimming options.

3-Step MacAdam LED binning for uniformity in both color and intensity Easy installation with 3M ® adhesive tape and a large variety of channel options available. 4 oz. copper PCB ensures optimal heat dissipation. No ultraviolet (UV/IR) radiation, and no mercury.

Low profile and flexible with Plug and Play and Hardwire options available.

SERIES MODEL

DL-FLEX2

COLOR

2790 - 2700K / 90CRI

3090 - 3000K / 90CRI

3590 - 3500K / 90CRI

4090 - 4000K / 90CRI

5090 - 3500K / 90CRI

– –SHE

ORDERED BY THE REEL

SERIES MODEL

DL-FLEX2

COLOR

2790 - 2700K / 90CRI

3090 - 3000K / 90CRI

3590 - 3500K / 90CRI

4090 - 4000K / 90CRI

5090 - 3500K / 90CRI

– –SHE

REEL LENGTH

– 20FT

• Specify required amount of 1 FT lengths before the ordering number.

Example: 10 x DL-FLEX2-SHE-4090

•	DL-FLEX2-SHE is packed in 20’ reel lengths.
•	Each reel comes with an input Hardwire power connector pre-assembled

to one end of the reel.

Example: DL-FLEX2-SHE-4090-20FT

I550

+ 24 VDC+ 24 VDC + 24 VDC+ 24 VDC

7/ 16"

QUICK SHIP

INPUT VOLTAGE

WATTAGE

LUMENS

LEDs/Ft.

CRI

DIMMING SIGNAL

DIMMING INPUT²

MIN RUN / MAX RUN¹

BEAM ANGLE

DIMENSIONS

AMBIENT TEMPERATURE³

COLOR CONSISTENCY

ENVIRONMENT

CERTIFICATIONS

WARRANTY4

24V DC

4.3 W/ft

See Performance Chart below

54 LEDs/ft

90+

PWM

0-10V / MLV/ ELV / TRIAC / C•L

RF & Wifi Smart Control, see page 14

READY, see page 15

2" / 20'

120º

7/16" W x 1/8" H

-14° to 113°F (-10° to 45°C)

-4° to 122°F (-20° to 50°C)

3 Steps MacAdam - Single Bin LEDs

Indoor - Dry cULus Listed, California Title 24 JA8 Compliant

5 Years

SPECIFICATIONS

24V DC 120 º BEAM DIMMABLE

INDOORHi - LumeIP65 ELV

REVERSE PHASE 0 -10V / 1 -10V

TRIAC

FORWARD PHASEIP66

0 -10V

RECEIVER

INDOOR

OUTDOOR

WET

FIELD CUTTABLE 1BIN3SDCMMAX RUN

20 FT

MIN RUN

2 IN

4	Low Voltage LED Flexible Linear shall have a limited warranty of
	up to five (5) years from the original date of shipment. All LED
	Flexible Linear products will be deemed defective if there is a
	failure of 10% or more of the LED components. Where a replace
	ment is warranted, custom cut-to-order LED Flexible Linear will
	only be replaced as originally ordered.
	See published warranty terms for detailed information.

¹	� Must be paired with compatible JESCO dimmable driver or controller.
2	Single runs can not exceed max run length. Cuts can only be made on the cutting mark.
3	Exceeding the ambient or operating temperature values may damage the LEDs by reducing
	the lifespan, lumen output, and/or adversely impact color consistency. It is recommended
	adequate airflow be taken into consideration in the installation and application of this product.
	Improper thermal management may lead to premature product failure and void the warranty.

AH1

Luminaire Type

AB1

https://www.jescolighting.com/wp-content/installation/DL-FLEX2-SHE_Install.pdf https://www.jescolighting.com/wp-content/photometrics/dl-flex/dl-flex2-she/DL-FLEX2-SHE-2790.zip https://www.jescolighting.com/wp-content/photometrics/dl-flex/dl-flex2-she/DL-FLEX2-SHE-3090.zip https://www.jescolighting.com/wp-content/photometrics/dl-flex/dl-flex2-she/DL-FLEX2-SHE-3590.zip https://www.jescolighting.com/wp-content/photometrics/dl-flex/dl-flex2-she/DL-FLEX2-SHE-4090.zip https://www.jescolighting.com/wp-content/photometrics/dl-flex/dl-flex2-she/DL-FLEX2-SHE-5090.zip

Specifications subject to change without notice REV. 02/28/2024

800 527 7796 855 265 5768

800 527 7796 855 265 5768 support@jescolighting.com Tech Support 855 592 0029

219 South 6th Ave City of Industry, CA 91746

Main Fax

Project

Fixture Type

Notes

PART NUMBER

DESCRIPTION

MAX. CURRENT

OPERATNG TEMP.

ENVIRONMENT

DIMENSIONS

DL-FLEX2-CRYSCONN10-PC40

12" plug and play power cord

5A¹

14°F to 113°F

Indoor, Dry

A 1/2" (12 mm) B 5/8" (16 mm) C 3/16" (4 mm) D 40" (1016 mm) E 13/8" (35 mm) F 1/2" (12 mm)

PART NUMBER

DESCRIPTION

MAX. CURRENT

OPERATNG TEMP.

ENVIRONMENT

DIMENSIONS

DL-FLEX2-CRYSCONN10-PC{40/79}-HW

12" Hardwire power cord

5A¹

14°F to 113°F

Indoor, Dry

A 1/2" (12 mm) B 5/8" (16 mm) C 3/16" (4 mm) D1 40" (1016 mm) D2 79" (2007 mm) E 1/2" (12 mm)

F 3/16" (5mm)

PART NUMBER

DESCRIPTION

MAX. CURRENT

OPERATNG TEMP.

ENVIRONMENT

DIMENSIONS

DL-FLEX2-CRYSCONN10-CC06

Connecting cable. Connects strip to strip

5A¹

14°F to 113°F

Indoor, Dry

A 1/2" (12 mm) B 5/8" (16 mm) C 3/16" (4 mm) D 6" (152 mm)

PART NUMBER

DESCRIPTION

MAX. CURRENT

OPERATNG TEMP.

ENVIRONMENT

DIMENSIONS

DL-FLEX2-CRYSCONN10-TT

Tape-to-Tape Connector

5A¹

14°F to 113°F

Indoor, Dry

A 1/2" (12 mm) B 5/8" (16 mm) C 3/16" (4 mm)

C height

D E

C height

D1 40 / D2 79 E

C height

D B

C height

D E

C height

D1 40 / D2 79 E

C height

D B

C height

D E

C height

D1 40 / D2 79 E

C height

D B

C height

D E

C height

D1 40 / D2 79 E

C height

D B

C height

D E

C height

D1 40 / D2 79 E

C height

D B

C height

D E

C height

D1 40 / D2 79 E

C height

D B

C height

D E

C height

D1 40 / D2 79 E

C height

D B

C height

D E

C height

D1 40 / D2 79 E

C height

D B

C height

NOTE: Avoid cutting on soldered joints. Segments with solder joint will not work with connector.

All dimensions are nominal

CRYSTAL Connectors

WIRING ACCESSORIES

I550

+ 24 VDC+ 24 VDC + 24 VDC+ 24 VDC

I550

+ 24 VDC+ 24 VDC+ 24 VDC

IR20

I550

IR20

I550

IR20

I550

IR20

I550

+24 VDC

I550

+ 24 VDC+ 24 VDC + 24 VDC+ 24 VDC

I550

+ 24 VDC+ 24 VDC+ 24 VDC

IR20

I550

IR20

I550

+24 VDC

I550

+ 24 VDC+ 24 VDC + 24 VDC+ 24 VDC

I550

+ 24 VDC+ 24 VDC+ 24 VDC24VDC+

BLACK [ - ]

RED[ + ]

BROWN LIVE

BLUE NEUTRAL

TYPICAL DIRECT WIRING

TRIAC / ELV

Forward Phase

TYPICAL TRIAC/ELV DIMMING WIRING

NOTE: wiring must be done following local and NEC codes

TYPICAL DIRECT WIRING

RED [ + ]

PURPLE [ - ]

BLACK OR WHITE [ - ]

BLACK LIVE

WHITE NEUTRAL

RED [ + ]

PURPLE [ - ]

BLACK OR WHITE [ - ]

BLACK LIVE

WHITE NEUTRAL

DIMMER OUTPUT LIVE

BLACK LIVE

DIMMER NEUTRAL

DL-PS-[30/40/96]/24-JB-OD-S

DL-PS-[40/60/96]/24-JB-DIM-A

I550

+ 24 VDC+ 24 VDC+ 24 VDC

2 4

24V DC

2 4

24V DC

TYPICAL PRIMARY DIMMING

TYPICAL SECONDARY DIMMING

DIMMING

CONTROLLER

1 CLASS 2 limits to 4A 96W for 24V DC system

HOW TO INSTALL PLUG-&-PLAY

AND HARDWIRE CRYSTAL

POWER CONNECTORS FLEX TAPE

HOW TO INSTALL TAPE-TO-TAPE

CRYSTAL CONNECTORS

TO FLEX TAPE

https://youtu.be/n0AB3qeJMew https://youtu.be/PnqDwgJ1OMM

Specifications subject to change without notice REV. 02/28/2024

800 527 7796 855 265 5768

800 527 7796 855 265 5768 support@jescolighting.com Tech Support 855 592 0029

219 South 6th Ave City of Industry, CA 91746

Main Fax

Project

Fixture Type

Notes

I550

+ 24 VDC+ 24 VDC + 24 VDC+ 24 VDC

I550

+ 24 VDC+ 24 VDC+ 24 VDC

IR20

I550

IR20

I550

+24 VDC

I550

+ 24 VDC+ 24 VDC + 24 VDC+ 24 VDC

C height

D E

C height

C height C height

D E

A A

B BD1 D2 D3

C height

2 5

PART NUMBER DL-FLEX2-CLAMP-PC-10B

DESCRIPTION 12” Plug & Play power cord

MAX. CURRENT 5A1

OPERATNG TEMP. 14°F to 113°F

ENVIRONMENT Indoor, Dry

DIMENSIONS A 5/8" (14.6 mm) B 1" (24.5 mm) C 3/8" (8mm) D 12" (305mm) E 1 3/8" (35 mm) F 1/2" (12mm)

C height

D E

C height

D1 40 / D2 79 E

CC3 CC6 CC12

D2 D3

C1 48 / C2 96

C height

D B

C height

D E

C height

D1 40 / D2 79 E

C height

D B

C height

D E

C height

D1 40 / D2 79 E

F A

C height

C DB E

PART NUMBER DL-FLEX2-CLAMP-PC-HW-10B

DESCRIPTION 12” Harrdwire power cord

MAX. CURRENT 5A1

OPERATNG TEMP. 14°F to 113°F

ENVIRONMENT Indoor, Dry

DIMENSIONS A 5/8" (14.6 mm) B 1" (24.5 mm) C 3/8" (8mm) D 12" (305mm) E 1/2" (12 mm) F 3/16" (5mm)

C height

D E

C height

D1 40 / D2 79 E

CC3 CC6 CC12

D2 D3

C1 48 / C2 96

C height

D B

C height

D E

C height

D1 40 / D2 79 E

C height

D B

C height

D E

C height

D1 40 / D2 79 E

F A

C height

C DB E

PART NUMBER DL-FLEX2-CLAMP-CC 3/6/12 -10B

DESCRIPTION Connecting cable. Connects strip to strip

MAX. CURRENT 5A¹

OPERATNG TEMP. 14°F to 113°F

ENVIRONMENT Indoor, Dry

DIMENSIONS A 5/8" (14.6mm) B 1" (24.5mm) C 3/8" (8mm) D1 3" (76mm) D2 6" (152mm) D3 12" (305mm)

C height

D E

C height

D1 40 / D2 79 E

CC3 CC6 CC12

D2 D3

C1 48 / C2 96

C height

D B

C height

D E

C height

D1 40 / D2 79 E

C height

D B

C height

D E

C height

D1 40 / D2 79 E

F A

C height

C DB E

PART NUMBER DL-FLEX2-CLAMP-WT10B

DESCRIPTION Wire to tape clamp connector

OPERATNG TEMP. 14°F to 113°F

ENVIRONMENT Indoor, Dry

DIMENSIONS A 5/8" (14.6mm) B 1" (24.5mm) C 3/8" (8mm)

C height

D E

C height

D1 40 / D2 79 E

CC3 CC6 CC12

D2 D3

C1 48 / C2 96

C height

D B

C height

D E

C height

D1 40 / D2 79 E

C height

D B

C height

D E

C height

D1 40 / D2 79 E

F A

C height

C DB E

1 CLASS 2 limits to 4A 96W for 24V DC system

PART NUMBER DL-FLEX2-CLAMP-TT10B

DESCRIPTION Tape to tape clamp connector

OPERATNG TEMP. 14°F to 113°F

ENVIRONMENT Indoor, Dry

DIMENSIONS A 5/8" (14.6mm) B 7/8" (19.5mm) C 3/8" (8mm)

NOTE: Avoid cutting on soldered joints. Segments with solder joint will not work with connector.

All dimensions are nominal

C height

D E

C height

D1 40 / D2 79 E

CC3 CC6 CC12

D2 D3

C1 48 / C2 96

C height

D B

C height

D E

C height

D1 40 / D2 79 E

C height

D B

C height

D E

C height

D1 40 / D2 79 E

F A

C height

C DB E

Clamp Connectors

WIRING ACCESSORIES

Specifications subject to change without notice REV. 02/28/2024

800 527 7796 855 265 5768

800 527 7796 855 265 5768 support@jescolighting.com Tech Support 855 592 0029

219 South 6th Ave City of Industry, CA 91746

Main Fax

Project

Fixture Type

Notes

B CD1

48 96

B CD

C D

D input cable

E output cable

SWITCH/SENSOR

T O

U T

24V LIGHT FIXTURE

3 4 5

B CD1

48 96

B CD

C D

D input cable

E output cable

SWITCH/SENSOR

T O

U T

3 4 5

B CD1

48 96

B CD

C D

D input cable

E output cable

SWITCH/SENSOR

T O

U T

3 4 5

C D

T O

U T

B D input cable

E output cable

PART NUMBER

DESCRIPTION

MAX. CURRENT

ENVIRONMENT

DIMENSIONS

DL-PS-EXT48, DL-PS-EXT48-WH or

DL-PS-EXT96, DL-PS-EXT96-WH,

48" / 96" Extension Cable. Black Finish is the standard. Specify White Finish with -WH.

Indoor, Dry

A 1/2" (11.8 mm) B 15/8" (41 mm) C 13/4" (43 mm)

D1 48" (1220 mm) D2 96" (2440 mm)

WIRING ACCESSORIES

PART NUMBER

DESCRIPTION

MAX. CURRENT

ENVIRONMENT

DIMENSIONS

DL-PS-2Y or DL-PS-3Y

2Y / 3Y Splitter

Indoor, Dry

A 1/2" (11.8mm) B 15/8" (41 mm) C 13/4" (43 mm)

D 11/2" (38 mm)2

PART NUMBER

DESCRIPTION

MAX. CURRENT

ENVIRONMENT

DIMENSIONS

DL-PS-SW-PIR-BK

In-line Passive Infrared Sensor Switch

Input & Output Cables Included

Indoor, Dry (use #4 screws for mounting)

A 13/4" (44 mm) B 15/8" (41 mm) C 3/4" (19 mm)

D 40 3/8" (1025 mm) E 40 1/2" (1028 mm)

IN-LINE SWITCH/SENSOR

PART NUMBER

DESCRIPTION

MAX. CURRENT

ENVIRONMENT

DIMENSIONS

PART NUMBER

DESCRIPTION

MAX. CURRENT

ENVIRONMENT

DIMENSIONS

DL-PS-SW-PIR-DOOR

In-line Passive Infrared Sensor Switch

Input & Output Cables Included

Indoor, Dry (mount via 3M VHB tape included)

A 1 1/8" (29 mm) B 3/8" (9.5 mm)

C 13/4" (45 mm) D 7" (178 mm)

DL-PS-SW-WH

In-line Capacitive Touch Switch with Dimming

Indoor, Dry (Recessed installation in 3/4" hole)

A 7/8" (22mm) C 5/8" (16 mm) D 7" (200 mm)

NOTE: All dimensions are nominal with +/- 1" tolerance.

4A current max, 96W max @24V DC https://www.jescolighting.com/wp-content/specsheets/DL-PS-SW-PIR-BK_Specs.pdf https://www.jescolighting.com/wp-content/specsheets/DL-PS-SW-PIR-DOOR_Specs.pdf https://www.jescolighting.com/wp-content/specsheets/DL-PS-SW-WH_Specs.pdf

Specifications subject to change without notice REV. 02/28/2024

800 527 7796 855 265 5768

800 527 7796 855 265 5768 support@jescolighting.com Tech Support 855 592 0029

219 South 6th Ave City of Industry, CA 91746

Main Fax

Project

Fixture Type

Notes

CH-SM-31 CH-SM-33 CH-SM-21 CH-SM-26 CH-SM-25CH-ME-31

CH-RI-18

CH-RM-31 CH-RM-32 CH-RM-33 CH-RM-34 CH-RM-35

CH-RI-17 CH-SM-36 CH-SM-35 CH-SM-24

CL FR FR60OP FR OP OPCL CL15 CL30 CL60FR FR60OP

CL FR FR60OP

H2 H1

CH-SM31

CH-ME-32 CH-SM-32 CH-SM-33 CH-SM-22 CH-RI-19

1.00” 25mm 1.10” 28mm 0.87” 22mm

1.35” 35mm 1.35” 35mm 0.94” 24mm

0.39” 10mm 0.39” 10mm 0.24” 24mm

AROP ARFR TROP

0.39” 10mm 0.39” 10mm 0.24” 24mm

0.72” 18mm 0.72” 18mm 0.55” 14mm

CL FR OP

0.72” 18mm 0.72” 18mm 0.55” 14mm

W H

H2 H1

0.31” 8mm 0.47” 12mm 0.22” 6mm

W H

0.50” 13mm 0.47” 12mm 0.22” 6mm

OP OP

W H

2.23” 53mm 0.55” 14mm 0.41” 11mm

W H

2.42” 62mm 0.55” 14mm 0.81” 21mm

W H

3.44” 88mm 0.73” 19mm 1.46” 37mm

W H

0.68” 17mm 3.78” 96mm 0.67” 17mm

W H

0.68” 17mm 5.27” 134mm 0.67” 17mm

W H

0.87” 22mm 0.51” 13mm 0.48” 12mm

W H

1.97” 50mm 1.35” 35mm 0.94” 24mm

W H

0.84” 21mm 1.03” 26mm 0.48” 12mm

CL FR OP

W H

0.91” 23mm 0.31” 8mm 0.48” 12mm

CL FR OP

W H

0.91” 23mm 0.60” 15mm 0.48” 12mm

FR OP

W H

1.20” 31mm 0.40” 10mm 0.79” 20mm

0.93” 24mm 0.43” 11mm 0.79” 20mm

0.67” 17mm 0.79” 20mm 0.40” 10mm

0.67” 17mm

0.53” 13mm 0.34” 9mm

0.48” 12mm

0.67” 17mm

0.88” 22mm 0.60” 15mm

0.48” 12mm

CL CL15 FR FR60 OP AROP SOP

Clear Frosted

Beam angle

Opal

Beam angle Shape Shape

CH-SM-37

CH-FL-32

CH-FL-31

Does not fitFit Fit 2 strips

Full di�usion

KEYS

Limited di�usion Does not apply

Min LED/Ft to achieve full di�usion

Compatibility

Di�usion

Available lens options

Model No.

Width

Height

Inner Width

H1 H2

60° 15° 30° 60°

INDIRECTINDIRECT

60°

H2 H1

60°

H2 H1

0.67” 17mm

0.53” 13mm 0.34” 9mm

0.48” 12mm

18 36 5472

72 72 72

72 72

72 72 72

72 100

18 18

36 36 36

H H

Specifications subject to change without notice REV. 02/28/2024

800 527 7796 855 265 5768

800 527 7796 855 265 5768 support@jescolighting.com Tech Support 855 592 0029

219 South 6th Ave City of Industry, CA 91746

Main Fax

Project

Fixture Type

Notes

I550

+ 24 VDC+ 24 VDC+ 24 VDC

DL-PS-[WP24/24/48/60]/24W

ORDERING INFO LPS

SERIES WATTAGE / VOLTAGE / TYPE

DL-PS-

WP24/24 - 24 Watt 24 Volt wall-plug

24/24 - 24 Watt 24 Volt wall-plug

48/24 - 48 Watt 24 Volt wall-plug

60/24 - 60 Watt 24 Volt wall-plug

ORDERING INFO CL2

SERIES WATTAGE / VOLTAGE

DL-PS-

60/24 - 60 Watt 24 Volt wall-plug

90/24 - 90 Watt 24 Volt wall-plug

100/24 - 96 Watt 24 Volt wall-plug

TYPE

-CL2

DL-PS-WP24/24

24W

1.0A

120V AC

24V DC

0.80

1 3/4"

3 1/4"

1 1/4"

MODEL

RATED POWER

RATED CURRENT

INPUT

DC OUTPUT

POWER FACTOR

WIDTH W

LENGTH L

HEIGHT H

DL-PS-24/24

34W

1.0A

120V AC

24V DC

0.80

1 1/2"

3 1/2"

DL-PS-48/24

48W

2.0A

120V AC

24V DC

0.84

4 ⅜"

1 ⅛"

DL-PS-60/24

60W

2.5A

120V AC

24V DC

0.80

1 1/2"

4 3/8"

1 1/2"

DL-PS-60/24-CL2

60W

2.5A

120V AC

24V DC

0.80

2 1/16"

5 1/8"

1 3/8"

MODEL

RATED POWER

RATED CURRENT

INPUT

DC OUTPUT

POWER FACTOR

WIDTH W

LENGTH L

HEIGHT H

DL-PS-90/24-CL2

90W

3.8A

120V AC

24V DC

0.80

2 1/16"

5 1/8"

1 3/8"

DL-PS-100/24-CL2

96W

4.0A

120V AC

24V DC

0.88

2 ¾"

7 7/8"

1 3/8"

LED POWER SUPPLIES • 24V DC • PLUG & PLAY

0 -10V

RECEIVER

Requires LC-RF-400 receiver and controller

LPS

CLASS 2

INDOOR

0 -10 dimming required additional interface LC-DIM5A

0 -10V

RECEIVER

Requires LC-RF-400 receiver and controller

INDOOR

0 -10 dimming required additional interface LC-DIM5A

Specifications subject to change without notice REV. 02/28/2024

800 527 7796 855 265 5768

800 527 7796 855 265 5768 support@jescolighting.com…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Apr 27, 2026.