Attachment_1_-_Labor_Categories.docx
DOCX document 44 KB Posted
- Attached to
- INL/WHP IDIQs - Functional Area 4 - Operations, Logistics, and Facility Support Services
- Solicitation number
- 19AQMM18R0252
About this file
This draft solicitation seeks proposals for three Indefinite Delivery/Indefinite Quantity (IDIQ) contracts to provide operations, logistics, and facility support services. Services include functions such as logistics analysis, warehousing, transportation, maintenance, engineering, and training. The solicitation is set aside exclusively for HUBZone small businesses. The Department of State Office of Acquisition Management will award the IDIQ contracts. Interested vendors should monitor FBO for a final solicitation and respond no later than the date specified. Questions about the draft solicitation are due by November 19, 2018 to the identified contracting officers.
Draft Attachment 1
View the file
Other files
Show all 21
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DRAFT 19AQMM18R0252 – ATTACHMENT 1
DRAFT RFP No. 19AQMM18R0252
ATTACHMENT 1 – LABOR CATEGORY DESCRIPTIONS
I. GENERAL REQUIREMENTS – APPLICABLE TO ALL POSITIONS
1. The “US”, “C”, and “M” designations will be utilized in Attachment 2 and if applicable in awarded task orders to designate US labor, Colombian labor, and Mexican labor respectively. Unless otherwise specified “C” and “M” line items are for Local Nationals (LNs) and “US” line items are for U.S. labor as defined in Section B.
The primary place of performance is as follows:
| C |
| Colombia |
| M |
| Mexico |
| US |
| OCONUS |
2. Education. Wherever a degree is listed or a college/university requirement is stated, the degree or education must be from an accredited institution of higher education in the U.S., Colombia, Mexico, or equivalent if from another country.
3. Experience. Unless otherwise stated below all experience must be directly relevant and commensurate with the duties to be carried out by an employee.
3. Experience in Lieu of Education. Education may be substituted, at the sole discretion of the Government, based on the table below. Substitutions will not be approved for scientific or engineering positions.
| High School Diploma |
| 2 years of additional relevant work experience may be substituted for a High School Diploma |
| Bachelor's Degree |
| 4 years of additional relevant work experience may be substituted for a Bachelor's Degree |
| Master's Degree |
| 10 years of additional relevant work experience may be substituted for a Master's Degree |
4. Security. The clearance requirements below apply to all employees unless a higher or lower clearance level is specified in individual task orders.
· If position is filled by a Local National (LN), favorable RSO vetting is required.
· If position is filled by a U.S. citizen or Third Country National (TCN), MRPT certification is required.
5. Additional Qualifications. All labor categories must possess any and all required licenses, certifications, permits, and meet all other requirements necessary to lawfully perform their duties. This requirement is separate and in addition to any educational and experience requirements.
II. SPECIFIC REQUIREMENTS
| Line Item |
| Labor Category Name |
| Description |
| Education / Experience |
| Language |
| X001 |
| Carpenter |
| Performs the carpentry duties necessary to maintain in good repair building woodwork and equipment such as bins, cribs, counters, benches, partitions, doors. Work involves most of the following: planning and laying out of work from blueprints, drawings, models, or verbal instructions, using a variety of carpenter's hand tools, portable power tools and standard measuring instruments, and making standard shop computations relating to dimensions of work; and selecting materials necessary for the work. In general, the work of the maintenance carpenter requires rounded training and experience usually acquired through a formal apprenticeship or equivalent training and experience. |
High School Diploma and 1 year of related experience.
| X002 |
| Cartographic Technician |
| Provides technical assistance to professional Cartographers in connection with the construction or revision of maps and charts. Work involves the solution of technical problems that require primarily the application of a practical knowledge of the methods and techniques by which maps and charts are constructed. Performs any, or a combination of duties such as: collecting, evaluating and selecting source materials, compiling information from source materials and developing a plan for using the information in accordance with product specifications. Duties could involve obtaining reliable measurements of earth's surface features such as elevations and distances from photographs by using photogram metric techniques and equipment, using drafting tools and automated equipment to make maps and charts, assembling aerial photographs into mosaics, and reviewing and editing map and chart manuscripts. |
High School Diploma and at least 3 years of related experience.
| X003 |
| Construction Inspector |
| Inspects initial construction and additional repairs to ensure adherence to contract specifications, building ordinances, and zoning laws. May be assigned to residential or commercial structures. |
| High School Diploma or equivalent. 2 of years of experience in the field or in a related area. Familiar with a variety of the field's concepts, practices, and procedures. Relies on instructions and pre- established guidelines to perform the functions of the job. Works under immediate supervision. |
| X004 |
| Data Entry Clerk |
| Work requires the application of experience and judgment in selecting procedures to be followed and in searching for, interpreting, selecting, or coding items to be entered from a variety of source documents. |
High School Diploma and at least 2 years related experience
| X005 |
| Drafter/CAD Operator |
| This operator prepares complete sets of complex drawings or computer models that include multiple views, detail drawings, and assembly drawings. Drawings or models include complex design features that require considerable drafting skill to visualize and portray. Assignments regularly require the use of mathematical formulas to draw land contours or to compute weights, center of gravity, load capacities, dimensions, quantities of material, etc. The Draft/CAD Operator works from sketches, computer models, and verbal information supplied by an engineer, architect, or designer to determine the most appropriate views, detail drawings, and supplementary information needed to complete assignments. This operator selects required information from computer programs, and internet sites, precedents, manufacturers' catalogs, and technical guides. This operator independently resolves most of the problems encountered. Supervisor or design originator may suggest methods of approach or provide advice on unusually difficult problems. |
High School Diploma and at least 3 years of related experience.
| X006 |
| Engineer, Civil |
| Perform engineering duties in planning, designing, and overseeing construction and maintenance of building structures, and facilities, such as roads, railroads, airports, bridges, harbors, channels, dams, irrigation projects, pipelines, power plants, water and sewage systems, and waste disposal units. Includes architectural, structural, traffic, ocean, and geo-technical engineers. |
A bachelor’s degree and 8 years of related experience are required.
| X007 |
| Engineer, Design |
| Typical associated tasks include, but are not limited to, computer-aided design, design studies and analysis, research and development, specification preparation, configuration management and document control, fabrication, assembly, and simulation and modeling. |
B.S. degree + 8 years’ experience in the areas of system design, engineering, and integration.
| X008 |
| Engineer, Electrical |
| Designs, tests, installs, and maintains large-scale electronic equipment or machinery for use in manufacturing or power generation or transmission. May use computer-assisted engineering and design software and equipment to perform assignments. Applies principles and techniques of electrical engineering to accomplish goals. Performs a variety of tasks. May provide consultation on complex projects and is considered to be the top level contributor/specialist. A wide degree of creativity and latitude is expected. Typically reports to a manager or head of a unit/department. |
Bachelor's Degree in Engineering. 8 years of experience in the field or in a related area. Demonstrates expertise in a variety of the field's concepts, practices, and procedures. Relies on extensive experience and judgment to plan and accomplish goals.
| X009 |
| Engineer, Environmental |
| Identifies, assesses and resolves problems concerning the environment. May also design, install, operate and maintain measuring apparatus to determine the level of pollutants involving air, land, and water. Performs experiments and reports findings on environmental consequences of equipment, tools, and procedures. Ensures the organization's conformance to federal, state, and local environmental legislation. Performs a variety of tasks. May provide consultation on complex projects and is considered to be the top level contributor/specialist. Typically reports to a manager or head of a unit/department. |
Bachelor's Degree in area of specialty. 8 years of experience in the field or in a related area. Familiar with a variety of the field's concepts, practices, and procedures. Relies on extensive experience and judgment to plan and accomplish goals.
| X010 |
| Engineer, General |
| Performs a variety of engineering tasks which are broad in nature and are concerned with the design and implementation, including personnel, hardware, software and support facilities and/or equipment. Supervises team of engineers through project completion. Plans and performs engineering research, design development, and other assignments in conformance with design, engineering, and customer specifications. Supervises team of engineers through project completion. Responsible for major technical/engineering projects of higher complexity and importance than those normally assigned to lower level engineers. Coordinates the activities of engineers and technicians assigned to specific engineering projects. Provides solutions to complex problems of diverse scope where analysis of situation or data requires an in-depth evaluation of various factors. |
Bachelor’s Degree or equivalent 8 years related experience
| X011 |
| Engineer, Logistics |
| Prepares integrated logistic plans and policy and procedures for logistic support for major systems. Ensures that proper logistic considerations are included in system development processes at each major milestone. Assists in performing analyses to determine system maintainability, reliability, and supportability requirements. Documents results of the analyses in a report format. Develops and reviews systems acquisition projects’ operating plans and procedures to ensure logistic support considerations are included. Performs technical training, configuration management, and quality assurance. |
B.A. or B.S. degree + 8 years’ experience providing logistic support for major systems.
| X012 |
| Engineer, Mechanical |
| Designs, develops, and tests all aspects of mechanical components, equipment, and machinery. Applies knowledge of engineering principles to design products such as engines, instruments, controls, robots, machines, etc. May be involved in fabrication, operation, application, installation, and/or repair of mechanical products. Performs a variety of tasks. May lead and direct the work of others. A wide degree of creativity and latitude is expected. Typically reports to a manager or head of a unit/department. |
Bachelor's Degree in Engineering. Minimum/General Experience 8 years of experience in the field or in a related area. Familiar with a variety of the field's concepts, practices, and procedures.
| X013 |
| Engineer, Requirements |
| Typical associated tasks include but are not limited to requirements analysis, cost analysis, cost performance trade-off analysis, feasibility analysis, regulatory compliance support, technology conceptual designs, and special studies and analysis. |
B.S. degree + 8 years experience in technical work in the major area of full life-cycle system engineering involving concept development and requirements analysis.
| X014 |
| Engineer, Structural |
| Designs load-bearing structures or structural elements, such as buildings, bridges, or roadways. Performs analysis of building materials for use in construction. Develops blueprints or specifications for use during construction and ensures all projects comply with applicable codes and regulations. Determines cause of structural failures, damages, and defects through site investigations. Provides reports detailing investigations and assessment of damages to the structure. Performs a variety of complicated tasks. May lead and direct the work of others. A wide degree of creativity and latitude is expected. Typically reports to a supervisor or manager. |
Bachelor's Degree in Engineering. 8 years of direct experience in the field. Familiar with a variety of the field's concepts, practices, and procedures. Relies on experience and judgment to plan and accomplish goals.
| X015 |
| Engineering Technician |
| Shall perform assignments that are not completely standardized or prescribed. Shall select or adapt standard procedures or equipment, using fully applicable precedents. Receives initial instructions, equipment requirements, and advice from supervisor or engineer as needed; performs recurring work independently; work is reviewed for technical adequacy or conformity with instructions. Performs one or a combination of typical duties as: |
a. Constructs components, sub-units, or simple models or adapts standard equipment. May troubleshoot and correct malfunctions.
b. Follows specific layout and scientific diagrams to construct and package simple devices and subunits of equipment.
c. Shall conduct various tests or experiments which may require minor modifications in test setups or procedures as well as subjective judgments in measurement; selects, sets up, and operates standard test equipment and records test data.
d. Extracts and compiles a variety of engineering data from field notes, manuals, lab reports, etc.; processes data, identifying errors or inconsistencies; selects methods of data presentation.
e. Shall assists in design modification by compiling data related to design, specifications, and materials,
f. Shall develop information concerning previous operational failures and modifications. Uses judgment and initiative to recognize inconsistencies or gaps in data and seek sources to clarify information. Which are pertinent to specific items of equipment or component parts.
High School Diploma plus Three year’s of experience as an Engineering Technician.
| X016 |
| Estimator |
| Forecasts project costs. Gathers details and compiles data to estimate all production costs according to specifications. Considers raw materials, labor, equipment, tools, labor and transportation for estimations. Helps determine necessary resources for projects based on cost estimates and budgetary constraints. Familiar with standard concepts, practices, and procedures within a particular field. Relies on judgment and experience to plan and accomplish goals. |
Requires a Bachelor's Degree. 6 years of experience in the field or in a related area.
| X017 |
| Facility Planner |
| Plans and coordinates facility renovation and repair. Must have experience in planning and coordinating facility renovation and repair within a large Government installation. Capable of providing the planning and coordination of all construction/renovations to administrative areas and computer laboratories, including structural, environmental and electrical systems. Should have extensive experience in providing technical support of equipment installations in offices and computer laboratories, maintenance of buildings including fire alarm systems, fire suppressant systems, interior and exterior lighting, standard and emergency passenger elevators, custodial services and other areas. |
BA/BS + 5 years related experience
| X018 |
| Geographic Information System (GIS) Specialist |
| The primary duties of this position shall include the timely and efficient completion of projects which involve geographic information processing; planning and scheduling programming tasks; designing programs within the system design (including decisions on file structures, data coding, access methods, record layouts, suitable programming languages(s), use of commercial or public domain software, etc.); performing complex programming, program coding, integration, and testing of code units; installing programs; and performing acceptance tests and technology transfer tasks. This individual shall be capable of programming major code units and have experience using a variety of computers, operating systems, and GIS applications software packages. |
This position requires a bachelor's degree (or equivalent work experience) and a minimum of 4 year experience in systems analysis and programming and GIS software development activities for specialized applications. Specialized knowledge is required of the principles, practices, methods, and techniques of GIS technology, as well as the ability to solve complex programming problems.
| X019 |
| HAZMat Specialist |
| Examines any of a variety of goods, services or operations for conformity to established quality, health, safety, legal, business, ethical or other standards, by performing any combination of the following duties. Examines raw materials for quality, and manufactured items for defects and for conformance to specifications, visually and using sample models and instruments. Verifies that established standards are maintained relative product-packaging; storage and transportation methods; building and facilities; and business practices, operations and services. Affixes seals or tags to approved items, issues or revokes licenses and permits or ascertains that licenses and permits have been obtained and are displayed. Confers with officials, interprets regulations and codes, and assists establishments in altering methods and practices to meet established standards. Investigates complaints and violations, prepares reports of findings and action taken or recommended, files charges and testifies in court. Recommends changes in standards, administrative procedures, facilities, methods, and practices. |
High School or GED + 4 years of total related experience and at least 1 year of experience processing and certifying hazardous material.
| X020 |
| Inventory Specialist |
| Receives, stores, and issues equipment, materials, supplies, merchandise, foodstuffs, or tools, and compiles stock records of items in stockroom, warehouse or storage yard. Counts, sorts, or weighs incoming articles to verify receipt of items on requisition or invoice. Examines stock to verify conformance to specifications. Stores articles in bins, on floor or on shelves, according to identifying information, such as style, size or type of material. Fills orders or issues supplies from stock. Prepares periodic, special or perpetual inventory of stock. Requisitions articles to fill incoming orders. Compiles reports on use of stock handling equipment, adjustments of inventory counts and stock records, spoilage of or damage to stock, location changes, and refusal of shipments. May mark identifying codes, figures, or letters on articles. May distribute stock among production workers, keeping records of material issued. May make adjustments or repairs to articles carried in stock. May cut stock to site to fill order. |
High School Diploma or equivalent + 2 years' related experience
| X021 |
| Janitor / Custodian |
| Cleans and keeps in an orderly condition factory working areas and washrooms, or premises of an office, apartment house, or commercial or other establishment. Duties involve a combination of the following: Sweeping, mopping or scrubbing, and polishing floors; removing chips, trash, and other refuse; dusting equipment, furniture, or fixtures; polishing metal fixtures or trimmings; providing supplies and minor maintenance services; and cleaning lavatories, showers, and restrooms. |
1 year related experience
| X022 |
| Laborer, General |
| Performs tasks, which require mainly physical abilities and effort: involving little or no specialized skill or prior work experience. The following tasks are typical of this occupation: Loads and unloads trucks, and other conveyances; moves supplies and materials to proper location by wheelbarrows or hand - trucks; stacks materials for storage or binning; collects refuse and salvageable materials. Digs, fills, and tamps earth excavations; levels ground using pick, shovel, tamper and rake, shovels concrete and snow; cleans culverts and ditches; cuts tree and brush; operates power lawnmowers. Moves and arranges heavy pieces of office and household furniture, equipment, and appliances; moves heavy pieces of automotive, medical engineering, and other types of machinery and equipment. Spreads sand and salt on icy roads and walk-ways; picks up leaves and trash. |
High School Diploma. Experience: One year of experience required.
| X023 |
| Laborer, Grounds Maintenance |
| Maintains grounds of industrial, commercial or public property such as buildings, camp and picnic grounds, parks, playgrounds, greenhouses, and athletic fields, and repairs structures and equipment, performing one or more of the following tasks: Cuts grass, using walking-type or riding mowers (less than 2000 lbs.). Trims hedges and edges around walks, flower beds, and wells, using hedge trimmers, clippers and edging tools. Prunes shrubs and trees to shape and improve growth, using shears and other hand tools. Sprays lawn, shrubs, and trees with fertilizer or insecticide. Plants grass, flowers, trees, and shrubs. Waters lawn and shrubs during dry periods, using hose or activating sprinkler system. Picks up and burns or carts away leaves, paper or other litter. Removes snow from walks, driveways, roads, or parking lots, using shovel and snow blower. Spreads salt on walkways and other areas. Repairs and paints fences, gates, benches, tables, guardrails, and outbuildings. Assists in repair of roads, walks, buildings, and mechanical equipment. May clean comfort stations, office and workshop areas, and parking lots by sweeping, washing, mopping and polishing. |
High School Diploma. Experience: One year of experience required.
| X024 |
| Laborer, Material Handling |
| Performs physical tasks to transport or store materials or merchandise. Duties involve one or more of the following: Manually loading or unloading freight cars, trucks, or other transporting devices; unpacking, shelving, or placing items in proper storage locations; or transporting goods by hand truck, cart, or wheelbarrow. |
High School Diploma. Experience: One year of experience required.
| X025 |
| Logistics Analyst |
| Performs system fault analysis, life cycle maintenance and integrated product support (IPS) of major systems. Controls the efficient flow of goods, services and information between point of origin through customer placement in order to meet customer requirements. Ensures the execution and continuous improvement of standard logistic processes. Logistics functions encompass maintenance, supply, transportation and logistics plans. Inherently included as logistics tasks are program formulation, policy planning, coordination, inspection, integrated logistics processes, joint planning logistics, acquisition and wholesale logistics, product support, asset visibility, material management and supervision. Establishes operational objectives and assignments. Works on complex problems where analysis of situations or data requires an evaluation of intangible variables. Involved in developing, modifying and executing policies which affect immediate operation(s). |
Bachelor's Degree or equivalent + 6 years' related experience
| X026 |
| Logistics Assistant |
| Plans, develops and implements programs to coordinate physical distribution, order fulfillment, inventory management and control, and contract management activities. Controls the efficient flow of goods, services, and information between point of origin through customer placement in order to meet customer requirements. Develops and administers production plan and schedules as they relate to material and product flow inbound and outbound to ensure customer service and time objectives are achieved within existing financial constraints in order to meet marketing and financial objectives. Ensures the execution and continuous improvement of standard logistics processes, such as the replenishment system, data interchange systems, demand management, electronic data systems administration and related functions. May perform equipment or system fault analysis. Involved in life cycle maintenance and integrated logistics support of major systems. Works on assignments that are semi-routine in nature where ability to recognize deviation from accepted practice is required. |
High School Diploma or equivalent + 4 years' related experience
| X027 |
| Logistics Specialist |
| Performs system fault analysis, life cycle maintenance and integrated product support (IPS) of major systems. Controls the efficient flow of goods, services and information between point of origin through customer placement in order to meet customer requirements. Ensures the execution and continuous improvement of standard logistic processes. Logistics functions encompass maintenance, supply, transportation and logistics plans. Assists in performing routine logistics duties which are broad in nature and include warehousing, packaging, shipping, and maintaining, repairing, and operating facilities and/or equipment Inherently included as logistics tasks are program formulation, policy planning, coordination, inspection, integrated logistics processes, joint planning logistics, acquisition and wholesale logistics, product support, asset visibility, material management and supervision. |
High School Diploma or equivalent + 2 years' related experience.
| X028 |
| Maintenance, General Worker |
| Must be a qualified journeyman and possess thorough understanding and knowledge of the skills required to plan, program and execute Maintenance, Inspection and Repair of building and structure, to include, but not limited to: foundations, partitions, trusses, beams, walls, doors, windows, floors, floor coverings, decks, stairs, hardware, paint and roofing. Must possess the knowledge and skills to incorporate energy conservation practices and procedures. |
High School Diploma. Experience: Two year’s of related experience.
| X029 |
| Material Control Specialist |
| Performs a variety of logistics functions which are broad in nature and include warehousing, receiving, packaging, shipping, and maintaining, repairing, and operating facilities and/or equipment. Detailed knowledge of basic logistics functions. Works on assignments that are moderate to complex in nature where judgment is resolving problems and making routine recommendations. Works under supervision. Normally receives no instruction on routine work, general instruction on new assignments. |
High School Diploma or equivalent + 6 years' related experience
| X030 |
| Mechanic - Fuel Distribution System |
| Maintains and repairs fuel storage and distribution systems, using hand and power tools and testing instruments. Inspects fuel receiving, storage, and distribution facilities to detect and correct leakage, corrosion, faulty fittings, and malfunction of mechanical units, meters, and gauges such as distribution lines, float gauges, piping valves, pumps, and roof sumps. Inspects electrical wiring, switches, and controls for safe- operating condition, grounding, and adjustment. Lubricates and repacks valves. Lubricates pumps, replaces gaskets, and seals and corrects pumping equipment misalignment. Cleans strainers and filters, services water separators, and checks meters for correct delivery and calibration. Overhauls system components such as pressure regulating valves and excess valves. Disassembles, adjusts, aligns, and calibrates gauges and meters or replaces them. Removes and installs equipment such as filters and piping to modify system or repair and replace system component. Cleans fuel tanks and distribution lines. Removes corrosion and repaints surfaces. Overhauls vacuum and pressure vents, floating roof seals, hangers, and roof sumps. Maintains record of inspections and repairs. |
HS diploma or equivalent and 4 years related experience.
| X031 |
| Mechanic - General |
| Repairs, rebuilds, or overhauls major assemblies of internal combustion automobiles, buses, trucks or tractors. Work involves most of the following: Diagnosing the source of trouble and determining the extent of repairs required; replacing worn or broken parts such as piston rings, bearings, or other engine parts; grinding and adjusting valves; rebuilding carburetors; overhauling transmissions; and repairing fuel injection, lighting, and ignition systems. In general, the work of the Motor Vehicle Mechanic requires rounded training and experience usually acquired through a formal apprenticeship or equivalent training and experience. |
High School or GED + 2 years related experience
| X032 |
| Mechanic - Heating, Refrigeration, and AC |
| Installs, services and repairs environmental-control systems in residences, department stores, office buildings and other commercial establishments, utilizing knowledge of refrigeration theory, pipefitting and structural layout. Mounts compressor, and condenser units on platform or floor, using hand tools, following blueprints or engineering specifications. Fabricates, assembles and installs ductwork and chassis parts, using portable metalworking tools and welding equipment. Installs evaporator unit in chassis or in air-duct system, using hand tools. Cuts and bends tubing to correct length and shape, using cutting and bending equipment and tools. Cuts and threads pipe, using machine-threading or hand-threading equipment. Joins tubing or pipes to various refrigerating units by means of sleeves, couplings or unions, and solders joints, using torch, forming complete circuit for refrigerant. Installs expansion and discharge valves in circuit. Connects motors, compressors, temperature controls, humidity controls and circulating ventilation fans to control panels and connects control panels to power source. Installs air and water filters in completed installation. Injects small amount of refrigerant into compressor to test systems and adds Freon gas to build up prescribed operating pressure. Observes pressure and vacuum gauges and adjusts controls to insure proper operation. Tests joints and connections for gas leaks, using gauges or soap-and-water solution. Wraps pipe in insulation batting and secure them in place with cement or wire bands. Replaces defective breaker controls, thermostats, switches, fuses and electrical wiring to repair installed units, using electrician's hand tools and test equipment. May install, repair and service air conditioners, ranging from fifteen to twenty tons cooling capacity, in warehouses and small factory buildings. |
High School Diploma, plus coursework/trade school in related field. Experience: One year of related experience.
| X033 |
| Mechanic - Heavy Equipment |
| Analyzes malfunctions and repairs, rebuilds and, maintains power equipment such as cranes, power shovels, scrapers, paving machines, motor graders, trench-digging machines, conveyors, bulldozers, dredges, pumps, compressors, and pneumatic tools. |
Operates and inspects machines or equipment to diagnose defects. Dismantles and reassembles equipment, using hoists and hand tools. Examines parts for damage or excessive wear/ using micrometers and gauges. Replaces defective engines and subassemblies, such as transmissions. Tests overhauled equipment to insure operating efficiency. Welds broken parts and structural members. May direct workers engaged in cleaning parts and assisting with assembly and disassembly of equipment. May repair, adjust and maintain mining machinery, such as stripping and loading shovels, drilling and cutting machines, and continuous mining machines.
High School Diploma, plus coursework/trade school in related field. Experience: Two year’s of related experience.
| X034 |
| Mechanic - Helper |
| Performs a variety of tasks such as washing, cleaning, and lubricating vehicles; loading, unloading, and storing automotive parts and supplies; and maintaining work areas. |
High School or GED + 1 years related experience
| X035 |
| Mechanic - Machinery Maintenance |
| Repairs machinery or mechanical equipment. Work involves most of the following: Examining machines and mechanical equipment to diagnose source of trouble; dismantling or partly dismantling machines and performing repairs that mainly involve the use of hand tools in scraping and fitting parts; replacing broken or defective parts with items obtained from stock; ordering the production of a replacement part by a machine shop or sending the machine to a machine shop for major repairs; preparing written specifications for major repairs or for the production of parts ordered from machine shops; reassembling machines and making all necessary adjustments for operation. In general, the work of a Machinery Maintenance Mechanic requires rounded training and experience usually acquired through a formal apprenticeship or equivalent training and experience. Excluded from this classification are workers whose primary duties involve setting up or adjusting machines. |
High School Diploma. Experience: One year of experience in related field.
| X036 |
| Operator - Heavy Equipment |
| Operates heavy equipment such as cranes/ clamshells, power shovels, motor graders, heavy loaders, carryalls, bulldozers, rollers, scrapers, and tractors. Equipment is used to excavate, load to move dirt, gravel or other material. Operator may read and interpret grade and slope stakes and simples plans. May grease, adjust and make emergency repairs to equipment. Operates cranes to move material, merchandize or equipment and load/unload material, merchandise to or from transportation devices. |
High School Diploma, plus coursework/trade school in related field. Experience: Operators shall be licensed in accordance with local, state or federal laws and have three year’s related experience.
| X037 |
| Pest Controller |
| Sprays chemical solutions or toxic gases and sets mechanical traps to kill pests that infest buildings and surrounding areas, fumigates rooms and buildings using toxic gases, sprays chemical solutions or dusts powders in rooms and work areas, places poisonous paste or bait and mechanical traps where pests are present; may clean areas that harbor pests, using rakes, brooms, shovels, and mops preparatory to fumigating; and may be required to hold a license. |
| X038 |
| Plumber |
| Assembles installs and repairs pipes, fittings and fixtures of heating, water, and drainage systems, according to specifications and plumbing codes, studies building plans and working drawings to determine work aids required, and sequence of installations. This worker inspects structure to ascertain obstructions to be avoided to prevent weakening of structure resulting from installation of pipe, and locates and marks position of pipe and pipe connections and passage holes for pipes in walls and floors. This worker cuts openings in walls and floors to accommodate pipe and pipe fittings, using hand tools and power tools, cuts and threads pipe, using pipe cutters, cutting torch, and pipe-threading machine, bends pipe to required angle by use of pipe-bending machine, or by placing pipe over block and bending it by hand. |
The Plumber, Maintenance assembles and installs valves, pipefittings, and pipes composed of metals, such as iron, steel, brass and lead, and nonmetals, such as glass, vitrified clay, and plastic. This person joins pipe by use of screws, bolts, fittings, solder, plastic solvent, and caulks joints, fills pipe system with water or air and reads pressure gauges to determine whether system is leaking, installs and repairs plumbing fixtures, such as sinks, commodes, bathtubs, water heaters, hot water tanks, garbage disposal units, dishwashers, and water softeners. This person repairs and maintains plumbing by replacing washers in leaky faucets, mending burst pipes, and opening clogged drains, and may weld holding fixtures to steel structural members.
High School Diploma. Experience: One year of experience required.
| X039 |
| POL Technician |
| Receives, stores, transfers, and issues fuel through pipelines at main-line or terminal stations. Receives fuel by tanker. Ships fuel by pipeline, tank car, tank truck, and barge. Prepares and checks receiving or ship's documents. Connects lines, grounding wires, and loading and off-loading arms or hoses to pipelines. Visually inspects samples of fuel, and checks gravity and flashpoint. Gauges tanks for water, temperature, and fuel levels. Checks pumping systems for correct operating pressure or unusual noises. Performs preventive maintenance and repairs on terminal systems. Assists in maintenance of government-owned railroad loading and switch area. Performs general housekeeping and grounds maintenance for terminal, pipeline and dock areas. |
High School or GED + 2 years related experience
| X040 |
| Project Manager |
| Responsible for managing the implementation of projects or programs. Plan, coordinate, and manage the actions taken by an organization to acquire and execute a specific piece of business, either competitively or non-competitively. Integrate all functions and activities necessary to perform the project/program to meet the client or customer requirements. Plan and implement actions by the program/project team to define and implement technical baseline and meet quality requirements for project/program products and services. Direct project/program team personnel, manage cost and schedule, ensure contract compliance, and serve as program interface. Responsibilities include planning, organizing, directing, and tracking all aspects of the project/program, including technology, schedule, cost, contract and customer satisfaction. Interfaces with task and functional leaders, subcontractors, support personnel, customer and upper management. Responsible for managing small to moderate risk project/program with responsibility for managing many tasks or functions of a single project/program. |
Bachelor's Degree or equivalent + 5 years' related experience
| X041 |
| Project Manager, Senior |
| Responsible for managing the implementation of projects or programs. Plan, coordinate, and manage the actions taken by an organization to acquire and execute a specific piece of business, either competitively or non-competitively. Integrate all functions and activities necessary to perform the project/program to meet the client or customer requirements. Plan and implement actions by the program/project team to define and implement technical baseline and meet quality requirements for project/program products and services. Direct project/program team personnel, manage cost and schedule, ensure contract compliance, and serve as project/program interface. Responsible for planning, organizing, directing, executing, monitoring, and controlling all aspects of the project/program, including technology, schedule, cost, contract and customer satisfaction. Interfaces with project managers, task and functional leaders, subcontractors, support personnel, and other stakeholders. Responsible for managing a moderate to high risk project/program (composed of either a single project or a coordinated effort of multiple related projects with a common technical or customer objective). |
Bachelor's Degree or equivalent + 10 years' related experience
| X042 |
| QC / Safety Inspector |
| Examines any of a variety of goods, services or operations for conformity to established quality, health, safety, legal, business, ethical or other standards, by performing any combination of the following duties. Examines raw materials for quality, and manufactured items for defects and for conformance to specifications, visually and using sample models and instruments. Verifies that established standards are maintained relative product-packaging; storage and transportation methods; building and facilities; and business practices, operations and services. Affixes seals or tags to approved items, issues or revokes licenses and permits or ascertains that licenses and permits have been obtained and are displayed. Confers with officials, interprets regulations and codes, and assists establishments in altering methods and practices to meet established standards. Investigates complaints and violations, prepares reports of findings and action taken or recommended, files charges and testifies in court. Recommends changes in standards, administrative procedures, facilities, methods, and practices. |
High School or GED + 8 years related experience
| X043 |
| QC / Safety Specialist |
| Examines any of a variety of goods, services or operations for conformity to established quality, health, safety, legal, business, ethical or other standards, by performing any combination of the following duties. Examines raw materials for quality, and manufactured items for defects and for conformance to specifications, visually and using sample models and instruments. Verifies that established standards are maintained relative product-packaging; storage and transportation methods; building and facilities; and business practices, operations and services. Affixes seals or tags to approved items, issues or revokes licenses and permits or ascertains that licenses and permits have been obtained and are displayed. Confers with officials, interprets regulations and codes, and assists establishments in altering methods and practices to meet established standards. Investigates complaints and violations, prepares reports of findings and action taken or recommended, files charges and testifies in court. Recommends changes in standards, administrative procedures, facilities, methods, and practices. |
High School or GED + 4 years related experience
| X044 |
| Scientist |
| Performs the functions of a technical expert in the relevant scientific field in the support of major programs or system development. Applies scientific expertise in defining and resolving system issues, performing analysis and developing plans and requirements in the subject-matter area for complex systems. Coordinates and manages the preparation of analyses, evaluations, and recommendations for proper implementation of programs and systems. |
B.A. or B.S. degree + 4 years’ experience in a scientific field such as biology, chemistry, nuclear, environmental, physics, mathematics, geology, or other scientific areas.
| X045 |
| Scientist, Senior |
| Performs the functions of a technical expert in the relevant scientific field in support of major programs or system development. Applies scientific expertise in defining and resolving system issues, performing analysis, and developing plans and requirements in the subject-matter area for complex systems. Coordinates and manages the preparation of analysis, evaluations, and recommendations for proper implementation of programs and systems. |
M.A. or M.S. degree + 10 years of experience in a scientific field such as biology, chemistry, nuclear, environmental, physics, mathematics, geology, or other scientific areas.
| X046 |
| Sheet Metal Worker |
| The Sheet-Metal Worker, Maintenance fabricates, installs and maintains in good repair the sheet-metal equipment and fixtures (such as machine guards, grease pans, shelves, lockers, tanks, ventilators, chutes, ducts, metal roofing) of an establishment. Work involves most of the following: planning and laying out all types of sheet-metal maintenance work from blueprints, models, or other specifications, setting up and operating all available types of sheet-metal working machines, using a variety of hand tools in cutting, bending, forming, shaping, fitting and assembling, and installing sheet-metal articles as required. In general, the work of the maintenance sheet-metal worker requires rounded training and experience usually acquired through a formal apprenticeship or equivalent training and experience. |
High School Diploma. Experience: One year of experience required.
| X047 |
| Spatial Analysis Technician |
| This individual shall function primarily as a technician by collecting, measuring, and recording scientific and geographic information; compiling field and other data, including remotely sensed data, into computerized data bases, GIS systems, and image processing systems; running software programs, especially GIS, image processing, and related software, to conduct analysis of the data; summarizing data in map, graphic, tabular, or narrative form; converting data for multiple hardware and software platforms; storage and retrieval of the data; and writing AML's (macros) to accomplish these tasks. |
This individual shall have the ability to work independently and within established guidelines and standard operational procedures to ensure uniform data collection and analysis.
This position requires a bachelor's degree + 2 years’ experience in field data collection techniques and geographic principles, methods, and current GIS technology.
| X048 |
| Supply Clerk |
| As directed, performs a variety of warehousing duties which require an understanding of the establishment's storage plan. Work involves most of the following: Verifying materials (or merchandise) against receiving documents, noting and reporting discrepancies and obvious damages; routing materials to prescribed storage locations; storing, stacking, or palletizing materials in accordance with prescribed storage methods; rearranging and taking inventory of stored materials; examining stored materials and reporting deterioration and damage; removing material from storage and preparing it for shipment. May operate hand or power trucks in performing warehousing duties. |
High School or GED + 2 years related experience
| X049 |
| Supply Technician |
| Performs limited aspects of technical supply management work (e.g., inventory management, storage management, cataloging, property utilization) related to depot, local, or other supply activities. Work usually is segregated by commodity area or function, and controlled in terms of difficulty, complexity, or responsibility. Assignments usually relate to stable or standardized segments of technical supply management operations; or to functions or subjects that are narrow in scope or limited in difficulty. The work generally involves individual case problems or supply actions. This work may require consideration of program requirements, together with specific variations in or from standardized guidelines. |
High School or GED + 2 years related experience
| X050 |
| Technical Writer |
| Develops, writes, revises, and edits reports, articles, manuals, specifications, presentation materials, and other technical documents. Uses rough outlines and resource materials and interprets information obtained through research or provided by technical specialists. Applies knowledge of AIS documentation content and format standards to prepare, edit and publish technical materials. |
Bachelor’s + 3 years of experience performing the foregoing technical writing/editing functions
| X051 |
| Technician |
| Responsible for providing support to engineers on technical projects and/or products. Works under supervision to perform a variety of engineering tasks that are broad in nature and are concerned with design and implementation, including support facilities and/or equipment. Supports the planning and performance of engineering and customer specifications. Supports the technical/engineering activities related to the development and integration of testing a project assigned to higher-level engineers. Assists in collecting and organizing information required for preparation of user's manuals, training materials, installation guides, proposals and other reports and deliverables. Works on problems of diverse scope where analysis of situation or data requires evaluation of identifiable factors. Exercises independent judgment within generally defined practices and policies in selecting methods and techniques for obtaining solutions. |
High School Diploma or equivalent + 4 years' related experience
| X052 |
| Technician, Electronic |
| Removes, repairs, modifies, services and installs various types of electronic components, including but not limited to airborne equipment systems and related devices such as electronic transmitting and receiving equipment (e.g., radar, radio, television, telecommunications, sonar, and navigational aids); personal and mainframe computer and terminals, and night vision devices. Assembles, solders, connects and inter-wires electronic components. Performs maintenance, alignment and functional tests of avionics using test equipment. Follows engineering drawings, schematics, safety procedures, military specifications, standards and technical manuals to accomplish assigned tasks. Documents work performed in aircraft forms, Army maintenance forms, records, and Contract Field Team workbooks. |
High School Diploma plus course work related to Electronics Technician Maintenance. Experience: Three year’s of related experience.
| X053 |
| Training Specialist |
| Develops, directs, plans, delivers and evaluates training programs or activities to meet external customer or internal employee learning objectives. Provides direct instruction and training to customers on services, procedures, processes, techniques, tactics, products or skill development. Assignments may include needs analysis, custom course development, development of criteria for evaluating the effectiveness of course objectives, and evaluation and learning assessments. Collaborates with customer or internal functional organization to develop, enhance, and/or evaluate new or existing learning objectives and course content. May create course curriculum, training materials, visual aids and documentation to support a variety of instructional formats such as lecture, lab exercises, field training, computer-based training (CBT), and/or web-based training (WBT). May develop exam materials and may be responsible for testing and qualitative evaluation of participant's attainment of learning objectives. Monitors and evaluates training programs, assesses results, and implements enhancements as needed. Trainers may also administer training programs to meet student needs, which may require post-training follow up to determine applicability of course material or training approaches. Has the knowledge and experience to be able to handle unusual and seldom occurring job events. Works under limited direction. Normally receives no instruction on routine work, general instructions on new assignments. Supervises and provides guidance to other personnel. |
Bachelor's Degree or equivalent + 6 years' related experience
| X054 |
| Training Specialist, Senior |
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .