19-651 - HT Mech Dwgs - Internals.pdf

HUNGERFORD & TERRY, INC.

Manufacturers of Water Treating Equipment 226 Atlantic Avenue Clayton, NJ 08312-0650 Phone (856) 881-3200 Fax (856) 881-6859

DOCUMENT TRANSMITTAL

URGENT ATTENTION REQUIRED! File No.: SUB_M345-01

To: Steckbeck Engineering & Surveying, Inc. Date: February 23, 2024 279 N. Zinns Mill Road Page: 1 of 1 Lebanon, PA 17042 H&T Contract No.: M-345

Attention: Paul Lutzkanin, PE, CSE Job: Fredericksburg Sewer & Water Auth.

Email: plutzkanin@steckbeck.net Fredericksburg, PA

We are:

[ ] Submitting for approval [ ] Sending as requested

[ ] Resubmitting for approval [ ] _________________ [ ] Sending for your information

The following [ ] enclosed [ ] under separate cover

Format Dwg. No. Rev. Title or Description

PDF

33552-A02 -A03 -C02 -C03

Tank Details Internal Details Interior Reference Pipe Support Details

Remarks:

[ ] Please return to us, as soon as possible, one copy of each drawing with your approval and or comments noted.

[ ] Fabrication is proceeding in accordance with these drawings.

[ ] Fabrication is being held pending return of approved prints. Delay in returning drawings will extend the delivery schedule.

[ ] Fabrication of major equipment is proceeding in accordance with these drawings.

[ ] Minor Equipment is being held pending return of approved prints.

REPRESENTATIVE: HUNGERFORD & TERRY, INC.

William J. Probasco

Chief Engineer

Contract\M-345\Eng.\SUB_M345-01 mailto:plutzkanin@steckbeck.net

MECHANICAL DRAWINGS

FOR: Fredericksburg Sewer & Water Authority Fredericksburg, PA

HUNGERFORD & TERRY, INC.

226 Atlantic Avenue Clayton, New Jersey

Contract No.: M-345 Drawing Series No.: 33552 Submitted: February 23, 2024 plutzkanin Construction Stamp - TEST plutzkanin Text Box X plutzkanin Text Box March 8, 2024 Paul Lutzkanin, P.E.

AutoCAD SHX Text 7 "14"

AutoCAD SHX Text 3'-7"

AutoCAD SHX Text 4'-10"

AutoCAD SHX Text 1'-3"

AutoCAD SHX Text 4 "12"

AutoCAD SHX Text H

AutoCAD SHX Text 6 "12"

AutoCAD SHX Text A

AutoCAD SHX Text E

AutoCAD SHX Text 11 "34"

AutoCAD SHX Text 1'-2 "14"

AutoCAD SHX Text 1'-5"

AutoCAD SHX Text

CLIPS

AutoCAD SHX Text

STUDS

AutoCAD SHX Text 4'-7 "34"

AutoCAD SHX Text 7'-7"

AutoCAD SHX Text 4'-0 "78"

AutoCAD SHX Text 4'-0 "34"

AutoCAD SHX Text 1 "12"

AutoCAD SHX Text D

AutoCAD SHX Text B

AutoCAD SHX Text F

AutoCAD SHX Text 11 "516"

AutoCAD SHX Text 1'-3"

AutoCAD SHX Text 1'-4 "12"

AutoCAD SHX Text H

AutoCAD SHX Text A

AutoCAD SHX Text E

AutoCAD SHX Text 8"

AutoCAD SHX Text

AutoCAD SHX Text 3'-2"

AutoCAD SHX Text

(HOLD)

AutoCAD SHX Text 6'-0"

AutoCAD SHX Text 12"

AutoCAD SHX Text 8"

AutoCAD SHX Text C

AutoCAD SHX Text G

AutoCAD SHX Text 2 "34"

AutoCAD SHX Text

NOTCH FOR WELD SEAM (TYP.)

AutoCAD SHX Text

* IF DESIRED, TANK FABRICATOR CAN IF DESIRED, TANK FABRICATOR CAN FURNISH AND INSTALL 1 " CARBON 12" CARBON STEEL FLANGE PAD FOR HYDRO TEST DRAIN. FURNISH WITH CARBON STEEL BLIND FLANGE, HARDWARE AND BLIND GASKET.

AutoCAD SHX Text

ASME NAMEPLATE

AutoCAD SHX Text

FOR SUPPORT CLIP DETAILS AND LOCATIONS SEE SK-33552-C04

AutoCAD SHX Text

SECTION "U-U"

AutoCAD SHX Text

INTERNAL ELEVATION VIEW

AutoCAD SHX Text NOTE: SEE PLAN VIEWS FOR PROPER SEE PLAN VIEWS FOR PROPER ORIENTATION OF ALL CONNECTIONS

AutoCAD SHX Text W6 x 20

AutoCAD SHX Text B

AutoCAD SHX Text F

AutoCAD SHX Text 10 "58"

AutoCAD SHX Text 10 "58"

AutoCAD SHX Text 8"

AutoCAD SHX Text 8"

AutoCAD SHX Text 0%%D

AutoCAD SHX Text 45%%D

AutoCAD SHX Text 90%%D

AutoCAD SHX Text 135%%D

AutoCAD SHX Text 180%%D

AutoCAD SHX Text 225%%D

AutoCAD SHX Text 270%%D

AutoCAD SHX Text 315%%D

AutoCAD SHX Text 300%%D

AutoCAD SHX Text A

AutoCAD SHX Text E

AutoCAD SHX Text C

AutoCAD SHX Text G

AutoCAD SHX Text D

AutoCAD SHX Text F

AutoCAD SHX Text B

AutoCAD SHX Text D

AutoCAD SHX Text 3'-1 "34"

AutoCAD SHX Text 14" x 18" MANHOLE WITH (2) YOKES & (1) " THICK EPDM SHORE A 70 14" THICK EPDM SHORE A 70 DUROMETER GASKET OR EQUAL, WITH (1) SPARE GASKET

AutoCAD SHX Text

(5) LIFTING LUGS, (4) ON TOP HEAD & (1) ON BOTTOM HEAD, PART No. TK-C18-C1, DWG. No. SK-TK-C18-C OR TANK FAB. STD.

AutoCAD SHX Text 3'-1 "34"

AutoCAD SHX Text "U"

AutoCAD SHX Text "U"

AutoCAD SHX Text

PLAN

AutoCAD SHX Text

(2) " x 4" LG. S.S. 12" x 4" LG. S.S.STUDS W/ -13 THR'D 12-13 THR'D ON 1'-4 " RAD. WELD 12" RAD. WELD TO TANK TOP HEAD WITH PARALLEL TO TK. VERT. CENTERLINE SEE DETAIL "S"

AutoCAD SHX Text

TYP.

AutoCAD SHX Text

TYP.

AutoCAD SHX Text

GROUNDING LUG SEE DETAIL

AutoCAD SHX Text

1 " DIA. 18" DIA. HOLE

AutoCAD SHX Text 78"

AutoCAD SHX Text 1 "34"

AutoCAD SHX Text 3 "12"

AutoCAD SHX Text 8"

AutoCAD SHX Text 3"

AutoCAD SHX Text 1"

AutoCAD SHX Text

GROUNDING LUG DETAIL

AutoCAD SHX Text

(NOT TO SCALE)

AutoCAD SHX Text

(2) " DIA. 916" DIA. HOLES

AutoCAD SHX Text

14" THICK STEEL PLATE

AutoCAD SHX Text 5"

AutoCAD SHX Text 3 "18"

AutoCAD SHX Text 10"

AutoCAD SHX Text 2"

AutoCAD SHX Text 10"

AutoCAD SHX Text 1 "78"

AutoCAD SHX Text 10" SQ. x " 12" THICK STEEL PLATE

AutoCAD SHX Text W6 x 20

AutoCAD SHX Text

1 " DIA. 18" DIA. HOLE

AutoCAD SHX Text

TYPICAL LEG DETAIL

AutoCAD SHX Text 2 "12"

AutoCAD SHX Text

(NOT TO SCALE)

AutoCAD SHX Text 2 "34"

AutoCAD SHX Text

STUD

AutoCAD SHX Text

CLIP

AutoCAD SHX Text 34"

AutoCAD SHX Text 1 "12"

AutoCAD SHX Text 14"

AutoCAD SHX Text 2"

AutoCAD SHX Text 3 "12"

AutoCAD SHX Text 12"

AutoCAD SHX Text

(37) "-16 x 1 " LG. 38"-16 x 1 " LG. 12" LG. 304 STN. STL. POINTED END, THREADED STUDS. (FURNISHED BY H & T INC.)

AutoCAD SHX Text

14" THICK STN. STEEL PLATE (FURNISHED BY TANK MANUFACTURER) (10) REQUIRED.

AutoCAD SHX Text

CLIP & STUD DETAIL

AutoCAD SHX Text

NTS

AutoCAD SHX Text

TANK SHELL

AutoCAD SHX Text 2 "34"

AutoCAD SHX Text 6'-0"

AutoCAD SHX Text 2'-7 "12"

AutoCAD SHX Text 10'-11 "34"

AutoCAD SHX Text

SHIPPING HEIGHT

AutoCAD SHX Text 90%%D

AutoCAD SHX Text 0%%D

AutoCAD SHX Text 180%%D

AutoCAD SHX Text 270%%D

AutoCAD SHX Text

R 4'-5 " 38" C/L ANCHOR BOLTS

AutoCAD SHX Text 1'-4 "12"

AutoCAD SHX Text 1'-5 "14"

AutoCAD SHX Text 34"

AutoCAD SHX Text 1'-5 "14"

AutoCAD SHX Text 1'-4 "12"

AutoCAD SHX Text

TYP.

AutoCAD SHX Text

TYP.

AutoCAD SHX Text

TYP.

AutoCAD SHX Text

TYP.

AutoCAD SHX Text

TYP.

AutoCAD SHX Text E

AutoCAD SHX Text 8 "116"

AutoCAD SHX Text

AutoCAD SHX Text 4'-0 "34"

AutoCAD SHX Text

SECTION "W-W"

AutoCAD SHX Text

DIMS. TO INSIDE FACE OF CLIP

AutoCAD SHX Text

(37) "-16 x 1 " LG. 304 S.S. POINTED 38"-16 x 1 " LG. 304 S.S. POINTED 12" LG. 304 S.S. POINTED END, THREADED STUDS. APPROX. 8 " 116" C-C, SEE DETAIL.

AutoCAD SHX Text 7'-6 "34"

AutoCAD SHX Text

SLOT TO SLOT

AutoCAD SHX Text 7'-0 "18"

AutoCAD SHX Text

SLOT TO SLOT

AutoCAD SHX Text 5'-2 "14"

AutoCAD SHX Text

SLOT TO SLOT

AutoCAD SHX Text

(10) 3 " x 1 " x " S.S. CLIPS 12" x 1 " x " S.S. CLIPS 12" x " S.S. CLIPS 14" S.S. CLIPS W/ SLOT. SEE CLIP & STUD DETAIL

AutoCAD SHX Text

SECTION "X-X"

AutoCAD SHX Text

NOTE: RELATIONSHIP OF ALL STUDS TO CONN. IS IMPORTANT AND MUST BE HELD.

AutoCAD SHX Text 270%%D

AutoCAD SHX Text 180%%D

AutoCAD SHX Text 3'-7"

AutoCAD SHX Text 4'-10"

AutoCAD SHX Text A

AutoCAD SHX Text H

AutoCAD SHX Text 2'-6"

AutoCAD SHX Text 2'-6"

AutoCAD SHX Text 1'-9"

AutoCAD SHX Text 1'-9"

AutoCAD SHX Text

HYDRO DRAIN

AutoCAD SHX Text 4 "12"

AutoCAD SHX Text

(1) " x 4" LG. STEEL ROD WITH 34" x 4" LG. STEEL ROD WITH 3 " LG. THREAD ON UPPER END, 12" LG. THREAD ON UPPER END, WELD OTHER END TO BOTTOM HEAD. OF STUD TO BE PARALLEL WITH OF STUD TO BE PARALLEL WITH VERTICAL TANK . SEE DETAIL "S."VERTICAL TANK . SEE DETAIL "S."

AutoCAD SHX Text

NOTES: 1.) 2.) 3.) 4.)

AutoCAD SHX Text TANK INTERIOR WILL BE UNLINED AND FREE OF GREASE, DIRT, AND DEBRIS TANK EXTERIOR SANDBLASTED PER SSPC-SP6 (COMMERCIAL BLAST CLEANING) AND COATED WITH ONE (1) SHOP COAT OF TNEMEC HI BUILD EPOXOLINE II SERIES N69F PRIMER. (3.0-5.0 MILS DFT, COLOR-1211 RED). FINISH PAINT TO BE FIELD APPLIED BY GENERAL CONTRACTOR. PROTECT ALL THREADS FROM SANDBLAST OPERATIONS. HEAD/SHELL TO FEATURE BUTT WELD TYPE WELDS IN LIEU OF OFFSET WELDS.

AutoCAD SHX Text

(4) " DIA. 316 STN. STL. RODS 12" DIA. 316 STN. STL. RODS WITH "-13 x 6" LG. THREAD 12"-13 x 6" LG. THREAD ONE END. WELD OTHER END TO BOTTOM HEAD. ALL THREAD ACCEPTABLE TO BE PARALLEL WITH VERTICAL TANK . RELATIONSHIP OF ALL RODS TO CONNECTION "A" IS IMPORTANT AND MUST BE HELD. SEE DETAIL "S" ROD SHOULD EXTEND TO 1" ABOVE OF CONN. A

AutoCAD SHX Text 2'-0"

AutoCAD SHX Text

STUDS

AutoCAD SHX Text

CLIPS

AutoCAD SHX Text

34" STUD

AutoCAD SHX Text 1"

AutoCAD SHX Text

ROD TOPS

AutoCAD SHX Text

REF. LINE

AutoCAD SHX Text 2'-1 "12"

AutoCAD SHX Text 2'-4 "14"

AutoCAD SHX Text "W"

AutoCAD SHX Text "W"

AutoCAD SHX Text "X"

AutoCAD SHX Text "X"

AutoCAD SHX Text

TANK EMPTY WEIGHT: 5400 LBS

AutoCAD SHX Text

12" RODS

AutoCAD SHX Text

5TH LIFTING LUG TO BE LOCATED BY TANKHOUSE ON BOTTOM HEAD FOR HANDLING

AutoCAD SHX Text

STRAIGHT SHELL

AutoCAD SHX Text

NO.

AutoCAD SHX Text

REVISIONS

AutoCAD SHX Text

DATE

AutoCAD SHX Text

CK'D

AutoCAD SHX Text

AutoCAD SHX Text THIS DRAWING AND INFORMATION CONTAINED THEREON IS THE PROPERTY OF HUNGERFORD & TERRY, INC., AND MUST NOT BE USED IN ANY WAY DETRIMENTAL TO THE INTEREST OF THE COMPANY. THIS DRAWING MUST BE RETURNED AT THE REQUEST OF HUNGERFORD & TERRY, INC.

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text F

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text F

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

MANUFACTURERS OF WATER TREATING EQUIPMENT

AutoCAD SHX Text

HUNGERFORD TERRY, INC. TERRY, INC. TERRY, INC.INC.NC..

AutoCAD SHX Text

CLAYTON, NEW JERSEY

AutoCAD SHX Text

AutoCAD SHX Text FREDERICKSBURG SEWER & WATER AUTHORITY FREDERICKSBURG, PA 96" O.D. GREENSANDPLUS FILTERS TANK DETAILS

AutoCAD SHX Text

DATE

AutoCAD SHX Text

CHECKED

AutoCAD SHX Text

STARTED

AutoCAD SHX Text

FINISHED

AutoCAD SHX Text

APPROVED

AutoCAD SHX Text

CONT NO.

AutoCAD SHX Text

FORM NO.

AutoCAD SHX Text

SCALE

AutoCAD SHX Text

DRAWING NO.

AutoCAD SHX Text

REV.

AutoCAD SHX Text

AutoCAD SHX Text 12/12/23

AutoCAD SHX Text

GRV

AutoCAD SHX Text 2/22/24

AutoCAD SHX Text

GRV

AutoCAD SHX Text 2/22/24

AutoCAD SHX Text

WJP

AutoCAD SHX Text 3/4" = 1'-0"

AutoCAD SHX Text M-345

AutoCAD SHX Text 33552-A02

AutoCAD SHX Text H

AutoCAD SHX Text

FLANGED NOZZLE

AutoCAD SHX Text 2"

AutoCAD SHX Text 6"

AutoCAD SHX Text

150 LB. STEEL

AutoCAD SHX Text

AutoCAD SHX Text 4 "34"

AutoCAD SHX Text

AutoCAD SHX Text 34"

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

FLAT FACE, SLIP ON FLANGE. SEE DETAIL "V."

AutoCAD SHX Text

AutoCAD SHX Text

TANK DRAIN

AutoCAD SHX Text G

AutoCAD SHX Text

FLANGE PAD

AutoCAD SHX Text 3"

AutoCAD SHX Text 7 "12"

AutoCAD SHX Text 1 "12"

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 58"-11

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 58"-11

AutoCAD SHX Text

1" DEEP USABLE THREADS. SEE DETAIL "R."

AutoCAD SHX Text

AutoCAD SHX Text

DRAINDOWN

AutoCAD SHX Text F

AutoCAD SHX Text

FLANGED NOZZLE

AutoCAD SHX Text 2"

AutoCAD SHX Text 6"

AutoCAD SHX Text

150 LB. STEEL

AutoCAD SHX Text

AutoCAD SHX Text 4 "34"

AutoCAD SHX Text

AutoCAD SHX Text 34"

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

FLAT FACE, SLIP ON FLANGE. SEE DETAIL "V."

AutoCAD SHX Text

AutoCAD SHX Text

AIR PRESSURIZING

AutoCAD SHX Text E

AutoCAD SHX Text

FLANGE PAD

AutoCAD SHX Text 2"

AutoCAD SHX Text 6"

AutoCAD SHX Text 1 "12"

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 4 "34"

AutoCAD SHX Text

AutoCAD SHX Text 58"-11

AutoCAD SHX Text 5 "12"

AutoCAD SHX Text

AutoCAD SHX Text 58"-11

AutoCAD SHX Text

1" DEEP USABLE THREADS. SEE DETAIL "R."

AutoCAD SHX Text

AutoCAD SHX Text

AIRWASH INLET

AutoCAD SHX Text D

AutoCAD SHX Text

FULL COUPLING

AutoCAD SHX Text 1"

AutoCAD SHX Text

AutoCAD SHX Text

3000 LB. STN. STL.

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

(THREADED) HALF-IN, HALF-OUT, WELD INSIDE & OUT SEE DETAIL "Q."

AutoCAD SHX Text

AutoCAD SHX Text

VENT

AutoCAD SHX Text C

AutoCAD SHX Text

FULL COUPLING

AutoCAD SHX Text 12"

AutoCAD SHX Text

AutoCAD SHX Text

3000 LB. STN. STL.

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

(THREADED) HALF-IN, HALF-OUT, WELD INSIDE & OUT SEE DETAIL "Q."

AutoCAD SHX Text

AutoCAD SHX Text

TELLTALE

AutoCAD SHX Text B

AutoCAD SHX Text

FLANGED NOZZLE

AutoCAD SHX Text 6"

AutoCAD SHX Text 11"

AutoCAD SHX Text

150 LB. STEEL

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 9 "12"

AutoCAD SHX Text

AutoCAD SHX Text 34"-10

AutoCAD SHX Text 9 "12"

AutoCAD SHX Text

AutoCAD SHX Text 34"-10

AutoCAD SHX Text

1" DEEP USABLE THREADS. SEE DETAIL "R."

AutoCAD SHX Text

AutoCAD SHX Text

INLET

AutoCAD SHX Text A

AutoCAD SHX Text

FLANGED NOZZLE

AutoCAD SHX Text 6"

AutoCAD SHX Text 11"

AutoCAD SHX Text

150 LB. STEEL

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 9 "12"

AutoCAD SHX Text

AutoCAD SHX Text 34"-10

AutoCAD SHX Text 8 "18"

AutoCAD SHX Text

AutoCAD SHX Text 12"-13

AutoCAD SHX Text

FLAT FACE, SLIP ON FLANGE. SEE DETAIL "W."

AutoCAD SHX Text

AutoCAD SHX Text

OUTLET

AutoCAD SHX Text

MARK

AutoCAD SHX Text

CONNECTION TYPE

AutoCAD SHX Text

I.D. OR SIZE

AutoCAD SHX Text O.D.

AutoCAD SHX Text

THK. OR WGT & TYPE

AutoCAD SHX Text

SCH. PIPE

AutoCAD SHX Text B.C.

AutoCAD SHX Text No. HOLES

AutoCAD SHX Text

DIA. HOLES

AutoCAD SHX Text B.C.

AutoCAD SHX Text No. TAPS

AutoCAD SHX Text

SIZE TAPS

AutoCAD SHX Text B.C.

AutoCAD SHX Text No. TAPS

AutoCAD SHX Text

SIZE TAPS

AutoCAD SHX Text

REMARKS

AutoCAD SHX Text No. REQ'D

AutoCAD SHX Text

CONNECTION FUNCTION

AutoCAD SHX Text

NOZZLE & BLIND FLANGE

AutoCAD SHX Text

OUTSIDE

AutoCAD SHX Text

INSIDE

AutoCAD SHX Text

FLANGED PAD

AutoCAD SHX Text TANK(S): No. REQ'D. DIA.

AutoCAD SHX Text

PRESSURE: DESIGN TEST

AutoCAD SHX Text

THICKNESS: HEAD SHELL

AutoCAD SHX Text

RADIUS: DISH KNUCKLE

AutoCAD SHX Text

CODE CONSTRUCTION (SEC.

AutoCAD SHX Text

TANK MATERIAL:

AutoCAD SHX Text

TANK LINING:

AutoCAD SHX Text

TANK SUPPORTS:

AutoCAD SHX Text

DESIGN TEMP. F X-RAY

AutoCAD SHX Text

GENERAL NOTES

AutoCAD SHX Text

FLANGED CONNECTIONS: ALL BOLT HOLES ARE TO STRADDLE

AutoCAD SHX Text

CENTERLINE OUTSIDE AND

AutoCAD SHX Text

THREAD) UNLESS OTHERWISE NOTED-DO NOT DRILL HOLES

AutoCAD SHX Text

THRU PAD! ALL FLANGES ARE TO BE FLAT FACED TYPE.

AutoCAD SHX Text

LINING: PREPARE INTERIOR FOR

AutoCAD SHX Text

LINING, PER SPEC. SK-ED . CARRY LINING THRU

AutoCAD SHX Text

ALL OPENINGS AND OVER THE FACE OF ALL FLANGES.

AutoCAD SHX Text

DIMENSIONS SHOWN ON THIS DRAWING ARE BEFORE

AutoCAD SHX Text

LINING. ADD APPROPRIATE THICKNESS FOR LINING.

AutoCAD SHX Text

EXTERIOR PAINTING: EXTERIOR SURFACES OF TANK ARE

AutoCAD SHX Text

TO BE CLEANED BY PER SPEC.

AutoCAD SHX Text

SK-ED BEFORE APPLYING

AutoCAD SHX Text

SHIPMENT: ALL FLANGES, COUPLINGS, ENDS OF PIPE,

AutoCAD SHX Text

AND MANWAYS SHALL BE PROTECTED FROM DAMAGE

AutoCAD SHX Text

DURING SHIPMENT. THE TANKHOUSE SHALL FURNISH

AutoCAD SHX Text

NECESSARY COVER PLATES, C.I. CAPS OR PLUGS, AND

AutoCAD SHX Text

STUDS, NUTS AND BOLTS TO SECURE COVER IN PLACE

AutoCAD SHX Text

BEFORE SHIPMENT IS MADE.

AutoCAD SHX Text

ALL DIMENSIONAL ALIGNMENT TOLERANCES ARE TO BE

AutoCAD SHX Text

IN ACCORDANCE WITH DRAWING SK-

AutoCAD SHX Text

ATTACHMENT WELDS FOR SUPPORTS OR CONNECTIONS

AutoCAD SHX Text

SHALL NOT BE PLACED CLOSER TO THE EDGE OF A WELD

AutoCAD SHX Text

IN A MAIN JOINT (LONGITUDINAL OR CIRCUMFERENTIAL)

AutoCAD SHX Text

RUBBER LINER: PAINT IN ( ) PLACE(S) ON TANK:

AutoCAD SHX Text

"CAUTION LINED TANK, DO NOT WELD".

AutoCAD SHX Text

ALL WELDS TO BE CONTINUOUS UNLESS OTHERWISE NOTED.

AutoCAD SHX Text o

AutoCAD SHX Text

OTHERWISE NOTED. ALL TAPS ARE 1" DEEP (USEABLE" DEEP (USEABLE

AutoCAD SHX Text THAN " FOR PLATES 1 " THICK OR LESS AND 1"12" FOR PLATES 1 " THICK OR LESS AND 1"12" THICK OR LESS AND 1"

AutoCAD SHX Text

FOR PLATES ABOVE 1 " THICK.12" THICK.

AutoCAD SHX Text

PROTECT ALL THREADS (MALE & FEMALE) BEFORE

AutoCAD SHX Text

SANDBLASTING AND PAINTING.

AutoCAD SHX Text

ALL BLIND FLANGES AND MANWAY COVERS REQUIRE

AutoCAD SHX Text

PLATED STEEL HARDWARE UNLESS OTHERWISE NOTED.

AutoCAD SHX Text

ON CENTERLINE INSIDE UNLESS

AutoCAD SHX Text

TK-C22

AutoCAD SHX Text

AutoCAD SHX Text

SEE NOTE 1

AutoCAD SHX Text -98-1

AutoCAD SHX Text

SEE NOTE 1

AutoCAD SHX Text

AutoCAD SHX Text

NONE

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

(4) STRUCTURAL STEEL

AutoCAD SHX Text

NONE

AutoCAD SHX Text

SA-516-70/SA-455 (SHELL)

AutoCAD SHX Text

VIII WITH STAMP)

AutoCAD SHX Text

ASME

AutoCAD SHX Text 16.608"

AutoCAD SHX Text 86.4"

AutoCAD SHX Text 3/8"

AutoCAD SHX Text

3/8" NOM.

AutoCAD SHX Text

130 PSI

AutoCAD SHX Text

100 PSI

AutoCAD SHX Text 96" O.D.

AutoCAD SHX Text

FOUR

AutoCAD SHX Text

FULL COUPLING HALF-IN, HALF-OUT

AutoCAD SHX Text

DETAIL "Q"

AutoCAD SHX Text

DETAIL "R"

AutoCAD SHX Text

TYPICAL FOR ALL FLANGE PADS

AutoCAD SHX Text

EXTERIOR

AutoCAD SHX Text

INTERIOR

AutoCAD SHX Text 18"

AutoCAD SHX Text + " 18" - "116"

AutoCAD SHX Text

DETAIL "S"

AutoCAD SHX Text

PER NOTES

AutoCAD SHX Text

STUD/ROD WELDED TO THE TANK HEAD.

AutoCAD SHX Text

DETAIL "W"

AutoCAD SHX Text

WELD PER TANKHOUSE STANDARDS

AutoCAD SHX Text

SEE DATA TABLE & NOTE

AutoCAD SHX Text

EXTERIOR FLANGE

AutoCAD SHX Text

INTERIOR FLANGE

AutoCAD SHX Text

REINFORCEMENT IF REQUIRED

AutoCAD SHX Text

WELD PER TANKHOUSE STANDARDS

AutoCAD SHX Text

REINFORCEMENT IF REQUIRED

AutoCAD SHX Text

DETAIL "V"

R

R

R

R

R

AutoCAD SHX Text "A"

AutoCAD SHX Text "A"

AutoCAD SHX Text

(4) 4" ELBOWS

AutoCAD SHX Text

MANHOLE LOCATION

AutoCAD SHX Text

(2) 4" TEES

AutoCAD SHX Text

(4) 4" x 1'-6"

AutoCAD SHX Text 4" x 1'-4 "14"

AutoCAD SHX Text 6" SPIG x 4" SOC BUSHING

AutoCAD SHX Text 1'-10 "58"

AutoCAD SHX Text 1'-10 "58"

AutoCAD SHX Text

(TYP.)

AutoCAD SHX Text

(TYP.)

AutoCAD SHX Text

INLET DISTRIBUTION SYSTEM

AutoCAD SHX Text

MATERIAL:

AutoCAD SHX Text

SCH. 80 PVC PIPE AND IPEX SCH. 80 S.W. PVC FITTINGS. INSTALLED BY H&T INC.

AutoCAD SHX Text

(INSTALLED BY GEN. CONTRACTOR)

AutoCAD SHX Text

UNDERDRAIN DISTRIBUTION SYSTEM

AutoCAD SHX Text

MATERIAL:

AutoCAD SHX Text

SCH. 80 PVC PIPE WITH 150 LB. SOCKET WELD VAN STONE FLANGE.

AutoCAD SHX Text

INSTALLED BY HUINGERFORD & TERRY, INC.

AutoCAD SHX Text 10 "12"

AutoCAD SHX Text 2'-6"

AutoCAD SHX Text 5'-0"

AutoCAD SHX Text 5 "38"

AutoCAD SHX Text

(5) SPCS @ 15" CTRS. = 6'-3"

AutoCAD SHX Text 3'-6 "78"

AutoCAD SHX Text 7 "12"

AutoCAD SHX Text 7 "12"

AutoCAD SHX Text 1'-0"

AutoCAD SHX Text 5 "18"

AutoCAD SHX Text 1'-9"

AutoCAD SHX Text

(TYP.)

AutoCAD SHX Text

(2) 1 " x 1 " x " STL. 12" x 1 " x " STL. 12" x " STL. 14" STL. ANGLE x 6'-9" LG. WITH (2) " DIA. HOLES DRILLED 58" DIA. HOLES DRILLED ON GAGE & (4) "-13 12"-13 STL. NUTS PER ANGLE

AutoCAD SHX Text

(12) McMASTER #80005K45 NYLON CABLE 21" LG. MIN.

AutoCAD SHX Text 6" x 7'-2" FE SCH. 80 PVC MANIFOLD W/ 6" 150 LB. VAN STONE S.W. FLANGE W/ (8) "-10 x 4 " LG. STUDS W/ 34"-10 x 4 " LG. STUDS W/ 12" LG. STUDS W/ (2) NUTS AND (1) WASHER (PVC SIDE) PER STUD

AutoCAD SHX Text F

AutoCAD SHX Text "B"

AutoCAD SHX Text "B"

AutoCAD SHX Text

DR. & TAP FOR 1" NPT (TYP.)

AutoCAD SHX Text

(12) 3" PLASTIC PROTECTOR CAPS DO NOT REMOVE

AutoCAD SHX Text 3" x 1'-8 " TOE34" TOE

AutoCAD SHX Text

6" SCH. 40 S.W. CAP

AutoCAD SHX Text

S-UD-1 SEE SK-33552-C03

AutoCAD SHX Text

SEE SANDVALVE DETAIL

AutoCAD SHX Text 1'-1 "12"

AutoCAD SHX Text 1'-1 "12"

AutoCAD SHX Text 1'-3"

AutoCAD SHX Text 1'-3"

AutoCAD SHX Text 3" x 3'-2 " TOE34" TOE

AutoCAD SHX Text 3" x 2'-11 " TOE34" TOE

AutoCAD SHX Text

~2" MOUND

AutoCAD SHX Text

GRS ANGLE

AutoCAD SHX Text

GRS

AutoCAD SHX Text

GRS FLAT

AutoCAD SHX Text TOP ( " x ") 18" x ") 116") GRAVEL LAYER

AutoCAD SHX Text

GRAVEL MOUNDING DETAIL

AutoCAD SHX Text 5" SQ. EXPANSIVE PORT STN. STL. & MONEL SAND VALVE WITH DELRIN SHANK (SK-UD-CV-4) WITH No. 20 DIST. PIECES. (32 REQUIRED)

AutoCAD SHX Text CONCRETE FILL 2000 LB. MIX MONOLITHIC POUR (NOT BY H&T INC.). LATERALS TO BE COMPLETELY ENCASED

AutoCAD SHX Text 3 "14"

AutoCAD SHX Text 18"

AutoCAD SHX Text

DETAIL "F"

AutoCAD SHX Text

3" SCH. 80 PVC LATERAL

AutoCAD SHX Text

MAINTAIN THIS CLEARANCE UNDER ALL SAND VALVES.

AutoCAD SHX Text

NTS

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

38" STN. STL. NUTS

AutoCAD SHX Text

DRILL 716" HOLE FOR " ROD38" ROD

AutoCAD SHX Text

1" STN. STL. SUPPORT PIPE

AutoCAD SHX Text

38" STN. STL. ROD 5 " LG. FULL THREAD 12" LG. FULL THREAD (8) PER UNIT

AutoCAD SHX Text

38" STN. STL. LATERAL

AutoCAD SHX Text

GRAVEL SCREEN ANGLE

AutoCAD SHX Text 3 "12"

AutoCAD SHX Text 1"

AutoCAD SHX Text

DETAIL "G"

AutoCAD SHX Text E

AutoCAD SHX Text F

AutoCAD SHX Text 1'-6"

AutoCAD SHX Text 1'-6"

AutoCAD SHX Text 2'-11"

AutoCAD SHX Text 2'-11"

AutoCAD SHX Text

(11) SPACES @ 7 " CENTERS = 6'-10 "12" CENTERS = 6'-10 "12"

AutoCAD SHX Text 11 "38"

AutoCAD SHX Text 2'-8 "14"

AutoCAD SHX Text 11 "38"

AutoCAD SHX Text 3'-11 "18"

AutoCAD SHX Text 5 "78"

AutoCAD SHX Text 9 "78"

AutoCAD SHX Text 5'-5 "14"

AutoCAD SHX Text 9 "78"

AutoCAD SHX Text

2" THR'D CAP

AutoCAD SHX Text

FOR MANIFOLD SUPPORT SEE DETAIL "H"

AutoCAD SHX Text 38" x 1'-7" TBE

AutoCAD SHX Text 1" x 4'-7" LG. W/ (2) 716" HOLES

AutoCAD SHX Text

SLOTS IN LATERALS FACE DOWNWARDS PLUS (1) 332" HOLE IN CAP

AutoCAD SHX Text

(24) " THR'D CAP38" THR'D CAP

AutoCAD SHX Text

FOR LATERAL SUPPORT SEE DETAIL "G"

AutoCAD SHX Text

(40) POLYPROPYLENE CABLE TIES, No. PLT3H-109 (11" LG.)

AutoCAD SHX Text 1" x 7'-1" LG. W/ (2) 716" HOLES

AutoCAD SHX Text 2" x 7'-7" FE MANIFOLD 7'-8 " APPROX. OVERALL 116" APPROX. OVERALL (VERIFY LENGTH DURING ASS'Y) 2" 150 LB. 304 STN. STL. FLAT FACE FLANGE & (4) "-11 x 2 " LG. STUDS 58"-11 x 2 " LG. STUDS 34" LG. STUDS W/ (1) NUT PER STUD (BOLT HOLES ON CENTERLINE)

AutoCAD SHX Text 38" x 2'-6" TBE

AutoCAD SHX Text 38" x 3'-0" TBE

AutoCAD SHX Text 38" x 3'-3" TBE

AutoCAD SHX Text 38" x 3'-6" TBE

AutoCAD SHX Text 38" x 3'-9" TBE

AutoCAD SHX Text

DETAIL "H"

AutoCAD SHX Text

38" STN. STL. NUTS

AutoCAD SHX Text 38" STN. STL. U-BOLT PART No. UB-BB-2ADC (1) PER UNIT

AutoCAD SHX Text

2" STN. STL. MANIFOLD

AutoCAD SHX Text

GRAVEL SCREEN ANGLE

AutoCAD SHX Text 3 "12"

AutoCAD SHX Text

SCREEN SECTION MIDDLE

AutoCAD SHX Text

SCREEN SECTION END

AutoCAD SHX Text

SCREEN SECTION END

AutoCAD SHX Text

OVERLAP

AutoCAD SHX Text

OVERLAP

AutoCAD SHX Text

SCREEN LAYOUT

AutoCAD SHX Text

SECTION "C-C"

AutoCAD SHX Text 2 "34"

AutoCAD SHX Text 1"

AutoCAD SHX Text

TANK SHELL

AutoCAD SHX Text

SCREEN

AutoCAD SHX Text 316" x 1 " CROSS FLAT 12" CROSS FLAT FULL LENGTH OF ANGLE

AutoCAD SHX Text

(37) "-16 STUDS 38"-16 STUDS WITH " I.D. x " 1332" I.D. x " 78" O.D. WASHERS & NUT

AutoCAD SHX Text

38"-16 STUD 1" FROM EACH END OF ANGLE (TYP.)

AutoCAD SHX Text

SECTION "D-D"

AutoCAD SHX Text 34"

AutoCAD SHX Text 34"

AutoCAD SHX Text

38"-16 STUD WITH NUT & WASHER

AutoCAD SHX Text 38"-16 STUD WITH 1332" I.D. x " O.D. 78" O.D. WASHERS & NUT

AutoCAD SHX Text 316" x 1 " CROSS FLAT 12" CROSS FLAT FULL LENGTH OF ANGLE 916" DIA. HOLES IN FLAT

AutoCAD SHX Text

SCREEN

AutoCAD SHX Text

(37) " x 1 " FLAT 6" LG. 316" x 1 " FLAT 6" LG. 12" FLAT 6" LG. WITH ' DIA. HOLE IN 916' DIA. HOLE IN CENTER OF FLAT

AutoCAD SHX Text

DETAIL "E"

AutoCAD SHX Text

(1) REQUIRED

AutoCAD SHX Text

(2) " DIA. 12" DIA. HOLES

AutoCAD SHX Text 1316"

AutoCAD SHX Text 2 " 78"

AutoCAD SHX Text 4 " 12"

AutoCAD SHX Text 2 " 516"

AutoCAD SHX Text 78"

AutoCAD SHX Text

DETAIL "F"

AutoCAD SHX Text

(8) REQUIRED

AutoCAD SHX Text 2 "516"

AutoCAD SHX Text 78"

AutoCAD SHX Text 1 "12"

AutoCAD SHX Text 34"

AutoCAD SHX Text 1 " x 1 " x " ANGLE12" x 1 " x " ANGLE12" x " ANGLE14" ANGLE

AutoCAD SHX Text 1 " x 1 " x " ANGLE12" x 1 " x " ANGLE12" x " ANGLE14" ANGLE

AutoCAD SHX Text

12" HOLE

AutoCAD SHX Text

AIRWASH SYSTEM

AutoCAD SHX Text

MATERIAL:

AutoCAD SHX Text PIPE: SCH. 40 304 STN. STL. FITTINGS: 304 STN. STL. THREADED HARDWARE: 304 STN. STL.

AutoCAD SHX Text F

AutoCAD SHX Text = " THK. EPDM FULL FACE DUROMETER 70 18" THK. EPDM FULL FACE DUROMETER 70 (SHORE A) GASKET OR EQUAL

AutoCAD SHX Text

(INSTALLED BY GEN. CONTRACTOR)

AutoCAD SHX Text F

AutoCAD SHX Text 4"

AutoCAD SHX Text 2'-4"

AutoCAD SHX Text 2'-6 "18"

AutoCAD SHX Text 2'-1 "12"

AutoCAD SHX Text

6" TEE

AutoCAD SHX Text 6" x 2'-0 " FE WITH 150 12" FE WITH 150 LB. VAN STONE FLANGE & (8) "-10 x 3 " LG. 34"-10 x 3 " LG. 12" LG. STN. STL. STUDS WITH (1) NUT & SAE WASHER PER STUD

AutoCAD SHX Text

(1) " DIA. AIR 12" DIA. AIR VENT HOLE

AutoCAD SHX Text 4 "58"

AutoCAD SHX Text

SECTION "A-A"

AutoCAD SHX Text

(INSTALLED BY GEN. CONTRACTOR)

AutoCAD SHX Text NOTE: 1.) (4) SYSTEMS REQUIRED 18" THICK FULL FACE EPDM (SHORE A) 70 DUROMETER GASKET OR EQUAL. SHOP ASSEMBLY BREAK-POINT.

AutoCAD SHX Text F

AutoCAD SHX Text E

AutoCAD SHX Text 1'-2 "58"

AutoCAD SHX Text

(4) SPACES @ 16 " CENTERS = 5'-6"12" CENTERS = 5'-6"

AutoCAD SHX Text 1'-2 "58"

AutoCAD SHX Text

7'-11 " TANK I.D.14" TANK I.D.

AutoCAD SHX Text 1'-6"

AutoCAD SHX Text 1'-5"

AutoCAD SHX Text 1'-6"

AutoCAD SHX Text 1'-5"

AutoCAD SHX Text SCREEN DATA MATERIAL: 304 STN. STL. MESH: 8-8 WIRE DIA.: 0.028" APPROXIMATE OVERLAP: 3" THREE (3) SECTIONS MATERIAL NOTE ALL NUTS & WASHERS TO BE 304 STN. STL. ALL ANGLES & FLATS TO BE STEEL. ALL STUDS TO BE NELSON 316 STN. STL. POINTED END "-16 38"-16 x 1 " LG. 12" LG. (4) SYSTEM(S) REQUIRED INSTALLED BY: GEN. CONTRACTOR

AutoCAD SHX Text

GRAVEL RETAINING SCREEN

AutoCAD SHX Text

34" (TYP.)

AutoCAD SHX Text 38"-16 x 1 " LG. 316 STN. STL. 12" LG. 316 STN. STL. POINTED-END NELSON STUDS ON 12" CENTERS

AutoCAD SHX Text 1 " x 1 " x " x 5'-4 " LG.12" x 1 " x " x 5'-4 " LG.12" x " x 5'-4 " LG.14" x 5'-4 " LG.14" LG.

AutoCAD SHX Text 1 " x 1 " x " x 7'-2" LG.12" x 1 " x " x 7'-2" LG.12" x " x 7'-2" LG.14" x 7'-2" LG.

AutoCAD SHX Text 1 " x 1 " x " x 7'-8 " LG.12" x 1 " x " x 7'-8 " LG.12" x " x 7'-8 " LG.14" x 7'-8 " LG.34" LG.

AutoCAD SHX Text

SEE DETAIL "F"

AutoCAD SHX Text

SEE DETAIL "E"

AutoCAD SHX Text "C"

AutoCAD SHX Text "C"

AutoCAD SHX Text "D"

AutoCAD SHX Text "D"

AutoCAD SHX Text

GRAVEL RETAINING SCREEN

AutoCAD SHX Text

(ANGLES ONLY)

AutoCAD SHX Text 316" x 1 " THK. CROSS FLAT 12" THK. CROSS FLAT FULL LENGTH OF EACH ANGLE

AutoCAD SHX Text 2 "516"

AutoCAD SHX Text

TOP OF 2" PIPE

AutoCAD SHX Text

TOP OF GRAVEL SCREEN CLIPS

AutoCAD SHX Text 2"

AutoCAD SHX Text

TOP OF CONCRETE

AutoCAD SHX Text

AIRWASH & SCREEN SUPPORT ANGLES

AutoCAD SHX Text

LATERAL SUPPORT SHOWN

AutoCAD SHX Text

HEADER SUPPORT SHOWN

AutoCAD SHX Text

1" LATERAL SUPPORT PIPE

AutoCAD SHX Text

12" ROD *

AutoCAD SHX Text

* BY TANK HOUSE

AutoCAD SHX Text

CONCRETE FILL (NOT BY H&T)

AutoCAD SHX Text

* " ROD12" ROD

AutoCAD SHX Text

34" STUD *

AutoCAD SHX Text

SECTION "B-B"

AutoCAD SHX Text

(2) PIPE SUPPORTS REQ'D SEE DWG. SK-33552-C03 FOR DETAILS (S-IN1)

AutoCAD SHX Text

NO.

AutoCAD SHX Text

REVISIONS

AutoCAD SHX Text

DATE

AutoCAD SHX Text

CK'D

AutoCAD SHX Text

AutoCAD SHX Text THIS DRAWING AND INFORMATION CONTAINED THEREON IS THE PROPERTY OF HUNGERFORD & TERRY, INC., AND MUST NOT BE USED IN ANY WAY DETRIMENTAL TO THE INTEREST OF THE COMPANY. THIS DRAWING MUST BE RETURNED AT THE REQUEST OF HUNGERFORD & TERRY, INC.

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text F

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text F

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

MANUFACTURERS OF WATER TREATING EQUIPMENT

AutoCAD SHX Text

HUNGERFORD TERRY, INC. TERRY, INC. TERRY, INC.INC.NC..

AutoCAD SHX Text

CLAYTON, NEW JERSEY

AutoCAD SHX Text

AutoCAD SHX Text FREDERICKSBURG SEWER & WATER AUTHORITY FREDERICKSBURG, PA 96" O.D. GREENSANDPLUS FILTER INTERNAL DETAILS

AutoCAD SHX Text

DATE

AutoCAD SHX Text

CHECKED

AutoCAD SHX Text

STARTED

AutoCAD SHX Text

FINISHED

AutoCAD SHX Text

APPROVED

AutoCAD SHX Text

CONT NO.

AutoCAD SHX Text

FORM NO.

AutoCAD SHX Text

SCALE

AutoCAD SHX Text

DRAWING NO.

AutoCAD SHX Text

REV.

AutoCAD SHX Text

AutoCAD SHX Text 2/22/24

AutoCAD SHX Text

GRV

AutoCAD SHX Text 2/22/24

AutoCAD SHX Text

GRV

AutoCAD SHX Text 2/22/24

AutoCAD SHX Text

WJP

AutoCAD SHX Text 3/4" = 1'-0"

AutoCAD SHX Text M-345

33552-A03

³

² ³ ³

³

AutoCAD SHX Text

NO.

AutoCAD SHX Text

REVISIONS

AutoCAD SHX Text

DATE

AutoCAD SHX Text

CK'D

AutoCAD SHX Text HUNGERFORD TERRY, INC. TERRY, INC. TERRY, INC. TERRY, INC.TERRY, INC. INC.INC.NC..

AutoCAD SHX Text

CLAYTON, NEW JERSEY

AutoCAD SHX Text

AutoCAD SHX Text FORM No.

AutoCAD SHX Text FORM No.

AutoCAD SHX Text

IRF-01

AutoCAD SHX Text

IRF-01

AutoCAD SHX Text

SCALE

AutoCAD SHX Text

MADE BY

AutoCAD SHX Text

DATE

AutoCAD SHX Text

CHECKED

AutoCAD SHX Text

APPROVED

AutoCAD SHX Text

TITLE

AutoCAD SHX Text CONT. No.

AutoCAD SHX Text

SK

AutoCAD SHX Text

GRV

AutoCAD SHX Text 2/22/24

AutoCAD SHX Text

NONE

AutoCAD SHX Text

WJP

AutoCAD SHX Text

GREENSANDPLUS FILTER INTERIOR REF.

AutoCAD SHX Text 33552-C02

AutoCAD SHX Text M-345

AutoCAD SHX Text

INLET DISTRIBUTOR SEE DWG. 33552-A03

AutoCAD SHX Text

AIRWASH DISTRIBUTOR SEE DWG. 33552-A03

AutoCAD SHX Text

UNDERDRAIN SYSTEM SEE DWG. 33552-A03

AutoCAD SHX Text

CONCRETE FILL (NOT BY H&T) 3.75 YDS .3.

AutoCAD SHX Text

*GRADED GRAVEL BED

AutoCAD SHX Text

GRAVEL RETAINING SCREEN

AutoCAD SHX Text GREENSANDPLUS 100 FT³ EFF. SIZE 0.30 - 0.35 mm UNIF. COEFF. < 1.6

AutoCAD SHX Text

40% FREEBOARD

AutoCAD SHX Text

* 1 " x " GRAVEL IS TO BE PUT INTO THE TANK FIRST. EACH SUCCESSIVE LAYER 12" x " GRAVEL IS TO BE PUT INTO THE TANK FIRST. EACH SUCCESSIVE LAYER 34" GRAVEL IS TO BE PUT INTO THE TANK FIRST. EACH SUCCESSIVE LAYER SHOULD BE OF SMALLER SIZE GRAVEL UNTIL THE FINAL LAYER OF " x " GRAVEL 18" x " GRAVEL 116" GRAVEL IS PLACED. SEE INSTRUCTION MANUAL. ALL MEDIA VOLUMES APPROXIMATE. FILL ACCORDING TO DEPTH, NOT VOLUME LISTED!

AutoCAD SHX Text

7'-2 " DRAINDOWN12" DRAINDOWN

AutoCAD SHX Text

10'-1 " OVERALL34" OVERALL

AutoCAD SHX Text

6'-0" STRAIGHT SHELL

AutoCAD SHX Text DIA.: 96" O.D. 96" O.D. AREA: 49.48 FT² 49.48 FT² No. REQ'D: 4 4

AutoCAD SHX Text 2'-6 "34"

AutoCAD SHX Text 3'-6 "12"

AutoCAD SHX Text 2'-0 "14"

AutoCAD SHX Text 1'-0"

AutoCAD SHX Text 2'-0"

AutoCAD SHX Text 1'-0"

AutoCAD SHX Text 2'-1 "12"

AutoCAD SHX Text 3 "14"

AutoCAD SHX Text 18" x " GRAVEL 3" 13 1 116" GRAVEL 3" 13 1 GRAVEL 3" 13 1 3" 13 1 13 1 13 1 1 14" x " GRAVEL 3" 13 1 18" GRAVEL 3" 13 1 GRAVEL 3" 13 1 3" 13 1 13 1 1 12" x " GRAVEL 1 " 7 - 14" GRAVEL 1 " 7 - GRAVEL 1 " 7 - 1 " 7 - 12" 7 - 7 - - 34" x " GRAVEL 1 " 7 - 12" GRAVEL 1 " 7 - GRAVEL 1 " 7 - 1 " 7 - 12" 7 - 7 - - 1 " x " GRAVEL 3" 13 1 12" x " GRAVEL 3" 13 1 34" GRAVEL 3" 13 1 GRAVEL 3" 13 1 3" 13 1 13 1 1 1 1 " x " GRAVEL 1 " 6 -12" x " GRAVEL 1 " 6 -34" GRAVEL 1 " 6 -GRAVEL 1 " 6 -1 " 6 -14" 6 - 6 - -

AutoCAD SHX Text

DEPTH (INCHES)

AutoCAD SHX Text

VOLUME (FT³))

AutoCAD SHX Text

EXTRA (FT³))

AutoCAD SHX Text

*GRAVEL BED

AutoCAD SHX Text

BELOW S.V.

AutoCAD SHX Text ANTHRACITE 54 FT³ (QUANTITY INCLUDES 1" EXTRA) (QUANTITY INCLUDES 1" EXTRA) EFF. SIZE 0.6 - 0.8 mm UNIF. COEFF. < 1.65

1"

S-UD1

AutoCAD SHX Text 8 34

AutoCAD SHX Text 3 916

AutoCAD SHX Text

AutoCAD SHX Text 1 12

AutoCAD SHX Text

AutoCAD SHX Text 716 x 34

AutoCAD SHX Text 18 14

AutoCAD SHX Text 19 14

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

STEEL

AutoCAD SHX Text

6ADC

AutoCAD SHX Text

AutoCAD SHX Text

S-IN1

AutoCAD SHX Text 5 78

AutoCAD SHX Text 2 716

AutoCAD SHX Text

AutoCAD SHX Text 1 12

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 21 12

AutoCAD SHX Text 22 14

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

STN. STL.

AutoCAD SHX Text

4ABC

AutoCAD SHX Text

AutoCAD SHX Text "D"/2

AutoCAD SHX Text "D"

AutoCAD SHX Text "C"

AutoCAD SHX Text "B"

AutoCAD SHX Text "B"

AutoCAD SHX Text "C"

AutoCAD SHX Text "A"

AutoCAD SHX Text "E"

AutoCAD SHX Text "G"

AutoCAD SHX Text "J" x "H" LG. SCH. 40 PIPE

AutoCAD SHX Text

"K" X.H. NUT

AutoCAD SHX Text No. REQ'D

AutoCAD SHX Text

U-BOLT # UB-BB-

AutoCAD SHX Text

MATERIAL

AutoCAD SHX Text K

AutoCAD SHX Text J

AutoCAD SHX Text F

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text H

AutoCAD SHX Text G

AutoCAD SHX Text SUPPORT No.

AutoCAD SHX Text NOTE: ALL DIMENSIONS ARE IN INCHES. ALL DIMENSIONS ARE IN INCHES. PAINT WITH (2) SHOP COATS OF RED ENAMEL

AutoCAD SHX Text

"F" SLOTS

AutoCAD SHX Text

NO.

AutoCAD SHX Text

REVISIONS

AutoCAD SHX Text

DATE

AutoCAD SHX Text

CK'D

AutoCAD SHX Text HUNGERFORD TERRY, INC. TERRY, INC. TERRY, INC. TERRY, INC.TERRY, INC. INC.INC.NC..

AutoCAD SHX Text

CLAYTON, NEW JERSEY

AutoCAD SHX Text

AutoCAD SHX Text FORM No.

AutoCAD SHX Text FORM No.

AutoCAD SHX Text

PS-15

AutoCAD SHX Text

PS-15

AutoCAD SHX Text

SCALE

AutoCAD SHX Text

MADE BY

AutoCAD SHX Text

DATE

AutoCAD SHX Text

CHECKED

AutoCAD SHX Text

APPROVED

AutoCAD SHX Text

TITLE

AutoCAD SHX Text CONT. No.

AutoCAD SHX Text

SK

AutoCAD SHX Text

GRV

AutoCAD SHX Text 2/22/24

AutoCAD SHX Text

NONE

AutoCAD SHX Text

WJP

AutoCAD SHX Text

PIPE SUPPORT DETAILS

AutoCAD SHX Text 33552-C03

M-345