Amendment 1 - RFP 15F06726R0000146.pdf
PDF 625 KB Posted
- Attached to
- Ammunition - 9mm Luger
- Solicitation number
- 15F06726R0000146
About this file
This document contains three amendments to Request for Proposal (RFP) 15F06726R0000146 for 9mm Luger ammunition in three variants: Service, Training, and Frangible. The amendments were posted to SAM.gov on June 23, 2026.
Amendment 001 extends the proposal submission deadline from 5:00 PM Central Time on Tuesday, July 14, 2026, to 5:00 PM Central Time on Friday, August 7, 2026. Amendment 002 modifies Section C.6 Quality Control by removing the requirement that digital optical inspection ensure proper application of waterproof sealants for Service ammunition; the revised language limits the inspection scope to ensuring against cartridge defects only. Amendment 003 revises Section C.4.2.4 Projectile Design for Training ammunition by expanding the restriction on exposed lead from "at the base of the bullet" to "no exposed lead is permitted" anywhere on the projectile, while maintaining existing prohibitions on hollow point and frangible designs.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Request for Proposal (RFP) 15F06726R0000146
Ammunition - 9mm Luger Service, Training, and Frangible
AMENDMENTS
Posted to SAM.gov on June 23, 2026
Amendment 001:
Section L.10 INSTRUCTIONS FOR SUBMISSION OF PROPOSALS (Pages 59-60)
Remove:
Proposals must be received by 5:00 PM/CT on Tuesday July 14, 2026.
Replace:
Proposals must be received by 5:00 PM/CT on Friday August 7, 2026.
Amendment 002:
Section C.6 Quality Control (Page 13)
Remove:
C.6.2 For Service ammunition, all cartridges delivered under this contract shall undergo an automated digital optical inspection. Digital optical inspection shall ensure the proper application of waterproof sealants (reference Sections C.4.4.5 for sealant requirements) and ensure against cartridge defects.
Replace:
C.6.2 For Service ammunition, all cartridges delivered under this contract shall undergo an automated digital optical inspection. Digital optical inspection shall ensure against cartridge defects.
Amendment 003:
Section C.4.2.4 Projectile Design (Page 10)
Remove:
Training - The training projectile shall be a full metal jacket (FMJ), total metal jacket (TMJ), or similar design. It may have a rounded or flattened nose profile. A hollow point design is expressly forbidden. The projectile shall not be of a frangible design. No exposed lead is permitted at the base of the bullet.
Replace:
Training - The training projectile shall be a full metal jacket (FMJ), total metal jacket (TMJ), or similar design. It may have a rounded or flattened nose profile. A hollow point design is expressly forbidden. The projectile shall not be of a frangible design. No exposed lead is permitted.
END OF AMENDMENTS
File details come from the government source that posted it. Updated .