15-Specifications Worksheet - Haul Truck.pdf
PDF 183 KB Posted
- Attached to
- Trucks: Dump Trucks and Haul Truck
- Solicitation number
- FS-01-26
- Issued by
- Upshur County, Texas
About this file
This specifications worksheet outlines the requirements for a haul truck to be procured by the City of San Angelo Fleet Services Division in San Angelo, Texas. The truck must be a new, current-year model delivered to 1727 Saint Ann Street, San Angelo, TX 76905, and must be fully operational and compliant with all federal and state regulations at the time of delivery. The specifications detail comprehensive requirements across multiple categories including body and interior features, powertrain specifications, chassis and suspension components, braking systems, electrical systems, trailer connections, headache rack configuration, and a hydraulic wet kit designed to operate the city's currently owned RGN, belly dump, and end dump trailers.
The haul truck specifications require a six-cylinder diesel engine with a minimum 15-liter displacement producing 480 horsepower at 1,800 RPM and 1,750 pound-feet of torque at 1,100 RPM, equipped with automatic or automated transmission and factory-set top speed of 70 MPH. The vehicle must feature a 64,000-pound gross vehicle weight rating, tandem rear axles with 46,000-pound capacity, air suspension, and Wabco 4S/4M ABS braking with traction control. Additional specifications include a Chelsea Airshift PTO with 27 gallon-per-minute dump pump operating at 3,000 PSI, an 80-gallon aluminum hydraulic reservoir, LED lighting throughout, exterior viewing cameras, and a JOST LSK37 Series 24-inch air slide fifth wheel. Optional items include a collision avoidance system and a five-year/60,000-mile extended warranty on engine, aftertreatment, and transmission components.
View the file
Other files
Show all 14
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Haul Truck • 1
HAUL TRUCK
Specifications Worksheet | FS-01-26
VENDOR:___________________________
Unit to be delivered to 1727 Saint Ann St., San Angelo, TX 76905. Must include all standard features, complete and functional at time of delivery. Include all literature needed to confirm specifications in proposal.
It em
DESCRIPTION YES NO NOTES
1. New and Unused Current Year Model Truck
BODY, INTERIOR, EXTERIOR
1. Exterior Color: White
2. Interior Color: Grey (Preferred)
3.
Cab Style: Air Ride Day Cab w/ Driver and Passenger Entry Assist Handles
4. Seating: Air Ride Driver’s Seat; Covering: Tear-Resistant Material
5. Floor Covering: Heavy Duty Rubber Mats
6. Steering: Left Side Primary w/ Adjustable Tilt and Telescope
7. License Plate Brackets: Front and Rear
8.
Front Bumper: 12” x 3/8” Painted Steel or similar w/ Duty Center Mounted Tow Pin; to include readiness for oversized load requirements (flag holders, banner fasteners, etc.)
9. AM/FM Radio w/ 2 Speakers Minimum
10.
Heater, Defroster, and Air Conditioner w/ Variable Temperature Control.
Cabin Air Filter. HVAC Controls w/ Recirculation Switch
11. Wipers: Intermittent
12. Mirrors: Electric Adjustable
13. Windows: Electric
14.
Aluminum Bar Grate Walking Platform over Frame Extending from Headache Rack to 5th Wheel
15. Completed Unit Operational and Meets all Federal and State Regulations
16. State Safety Inspection
17. Delivery to 1727 Saint Ann, San Angelo, TX 76905
Haul Truck • 2
POWERTRAIN
1. Engine: Six (6) Cylinder Diesel minimum
2. Must meet Year Model EPA Requirements
3. Horsepower: 15 Liter Preferred, 480 HP @ 1800 RPM Minimum
4. Torque: 1750 Lb/Ft @1100 RPM Minimum
5. Engine Brake w/ Cruise Control Enabled at 3 MPH Above Set Speed
6.
Air Intake w/ Engine Mounted High Capacity Air Cleaner and Passive Precleaners preferred
7.
Exhaust: Right Hand B-Pillar Mounted Vertical Tailpipe. 11’6” Height with Right Hand Curve. Automatic Over-the-Road Regeneration and Dash Mounted Regeneration Request Switch
8.
Rear Air On/Off Engine Fan Clutch. Automatic Fan Control w/ Dash Switch and Indicator Light. Non-Engine Mounted
9. Transmission: Automatic (preferred) or Automated
10. Top Speed: Factory Set at 70 MPH
11. Cruise Control w/ 70 MPH Limit
12. Idle Shutdown: 5 Minutes without Clutch and Service Brake Override
13.
Rear Axle: Tandem w/ Dual Rear Wheel; Single Reduction; 3.25:1 Ratio or similar to match Powertrain combination
14. Fuel Tank: 100 Gallon Minimum. LH Mounted
15.
PTO: Direct Mount Airshift Pump and Airshift PTO; Automatically Disengage at 5 MPH
16. PTO With Cruise Set & Resume Switch: 700 RPM
17. PTO Control. Dash-mounted w/ Indicator Light, Guard and Piping
18. PTO Mode RPM Increment: 50 RPM
19. PTO Governor Ramp Rate: 50 RPM per Second
20. PTO Mode Engine RPM Minimum and Limit: 600 / 1500 RPM
21. PTO Mode Clutch Override – Clutch Enabled
22. PTO Shutdown: 20 Minutes without Clutch and Brake Override
23. Automatic Engine Shutdown Protection System
24. Front Axle: 17,500lb Capacity Minimum.
Haul Truck • 3
25.
Rear Axle: RT-46-160 46,000lb R-Series Tandem Rear Axle. Iron Rear Axle Carrier. 18N Meritor Extended Lube Main Driveline w/ Full Round Yokes. 17N Meritor Extended Lube Interaxle Driveline w/ Full Round Yokes or approved equivalent
26.
Driver Controlled Traction Differential – Both Tandem Rear Axles, One
(1) Interaxle Lock Valve, One (1) Driver Controlled Differential Lock.
Forward-Rear and Rear-Rear Axle Valve Indicator Light and Buzzer for Each Mode Switch
CHASSIS, WHEELS, TIRES, AND STEERING
1. GVWR: 64,000 lbs. minimum
2. Expected Rear Drive Axle Load: 40,000 lbs.
3. Expected GCWR: 120,000 lbs. minimum
4.
Power Steering Pump: TRW TAS-85 Minimum. 4 Quart Power Steering Reservoir
5.
Front Suspension: 17,500lb minimum Taper Leaf Front Suspension w/ Maintenance Free Rubber Bushings – Front Suspension Front Shock Absorbers
6.
Rear Suspension: 46,000# Minimum Capacity. 56” Axle Spacing Fore/Aft and Transverse Control Rods. Rear Shock Absorbers. Tandem Axle
7. Frame: 7/16” x 3 9/16” x 11 1/8” Single Steel Frame. 120 PSI or better
Tires and Wheels: Ten (10) Appropriately sized for axle and GCWR, 16 Ply Radial Cut and Chip Resistant. Mounted on Heavy Duty Steel Wheels
9. Rear Fenders: Steel or Plastic
Ride: Air Suspension on Two Axles w/ Manual Dump Valve, Leveling Valve, Indicator Light, Gauge, and Buzzer. Rear Shock Absorbers Mounted on Two Axles
BRAKES
1. Wabco 4S/4M ABS w/ Traction Control
2. Relay Valve w/ 5-8 PSI Crack Pressure
3.
BW AD-9 Brake Line Air Dryer w/ Heater. Bendex Oil Coalescing Filter for Air Dryer. Frame Mounted
4. Steel Air Brake Reservoirs w/ Pull Cables
Haul Truck • 4
5. Front Disc Brakes preferred
6.
Spider Cam Rear Drum Brakes, Double Anchor, Fabricated Shoes or Similar
7. Haldex Goldseal Longstroke 2-Drive Axles or Similar
8. Spring Parking Chambers w/ Automatic Slack Adjusters
9. Vehicle Roll Stability Control
ELECTRICAL
1. Alternator: DR 12V 160 Amp Minimum.
2. Battery: Group 31, 3000 CCA Minimum. Threaded Studs
3. Battery Box Frame Mounted on Driver Side Under Cab
4.
Positive Load Disconnect w/ Cab Mounted Switch Mounted Outboard Driver Seat Preferred
5.
Positive and Negative Terminal Remotely Located for Jump Starting Purposes
6. LED Marker, Stop, and Turn Lights
7.
Dual Amber LED Strobe Lights w/ Stainless Steel Brackets. Cab Mounted
Automatic Fan Control w/ Dash Switch and Indicator Light. Non-Engine Mounted
9.
Phillips-Temro 1500 Watt / 115 Volt Block Heater w/ Chrome Engine Heater Receptacle Mounted Under LH Door
Exterior Viewing Cameras with 6 in. (minimum) Display – Driver, Passenger, Upper Cab (looking down to Fifth Wheel) cameras required
TRAILER CONNECTIONS
1.
JOST LSK37 Series Low Lube 24.0” Air Slide Fifth Wheel w/ 2” Slide Increments with blocking (for End Dump connection) or equivalent
2.
Dash Mounted Control Valve and Plumbing for LH Air Actuated Fifth Wheel Release
3. Trailer Slides Angled to Fifth Wheel
4. 12 Foot Straight Trailer Air Hose
5. Hasp, Hook, and Spring for Trailer Lines
6. Combination Dummy Glad Hands and Light Plug Holder
7. Primary Connector / Receptacle Center Pin Powered through Ignition
Haul Truck • 5
SAE J560 7-Way Primary Cable Receptacle Bracket Mounted on Back of Cab
9.
12 Foot Detachable Straight Primary Trailer Electrical Cable with SAE J560 7-Way Connector
HEADACHE RACK
1.
Headache Rack: 3” Minimum Pipe or Square Steel or Aluminum; Heavy Duty
a. Expanded Metal Covered Operator Line-of-Sight Window
b. Tool Box: Driver and Passenger Side. Frame-mounted w/
Lockable Lid and Integrated Step
c. Chain Box: Mounted Passenger Side Headache Rack.
Vertical, Lockable
d. Expanded Metal Walkway from Headache Rack to 5th Wheel
e. Two (2) Adjustable Work Lights: LED, Mounted to Upper
Rail of Headache Rack
HYDRAULIC WET KIT
1. Chelsea Airshift PTO w/ In-Cab Control Valves or Approved Equivalent
2. Pump: 27 gpm Minimum Dump Pump
3. Pressure: 3000 psi Minimum
4. Reservoir: 80 Gallon Minimum; Aluminum
5.
Hoses and Connections: must connect and operate currently owned RGN (2 hose) Belly Dump (air) and End Dump (single hose) trailers
6. Relief Valve: 3000 psi
7. Couplers: Quick Release
OPTIONS
1. Collision Avoidance System
2.
5 Year/60,000 mile Extended Warranty on Engine, Aftertreatment and Transmission (List Items and Terms Separately) or better
3. Operator, Parts, and Service Manuals
File details come from the government source that posted it. Updated .