15_21. RELOC RRL Universal Fixture Connector (Basis of Design).pdf
PDF 393 KB Posted
- Attached to
- BPA - LED light fixtures, modular wiring, lighting controls components, and other associated materials
- Solicitation number
- 15F06724Q0000408
About this file
This document appears to be a features and specifications sheet for the RELOC-Ready Luminaire (RRL) Universal Fixture Connector, which is designed to enable a simple and consistent factory-installed option across all ABL luminaire brands. The RRL connector is compliant with various electrical and safety standards and can be used with the OnePass system. It provides a touch-safe design and wiping contact allowing for safe disconnect under load. The document outlines the electrical specifications, system features, and wiring instructions for different voltage configurations and control applications.
The related federal contract opportunity is for a Blanket Purchase Agreement (BPA) to establish a single award contract for LED light fixtures, modular wiring, lighting controls components, and other associated materials for the FBI CJIS Division Campus in Clarksburg, West Virginia. This is an open market, brand name or equal, simplified acquisition set aside 100% for small businesses. The FBI is requesting pricing and lead time information for the items listed in the attached Materials List, which includes the RRL connector as an option. The award will be based on a best value determination, with technical acceptability being the most important factor, followed by price and delivery/lead time. Questions are due by June 24, 2024, and quotes are due by July 3, 2024.
View the file
Other files
Show all 21
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
FEATURES & SPECIFICATIONS
INTENDED USE
The RELOC®-Ready Luminaire (RRL) connectors enables a simple and consistent factory installed option across all ABL luminaire brands. When ordered on a RELOC fixture cable (OFC), fixture cord drops (OCS or OCU) and fixture drop cables (OD); the line side of the connector will be factory attached to all the wire leads except for the ground wire. When ordered with the luminaire, the load side of the connector will be prewired based on the appropriate wiring instruction selection.
ELECTRICAL
• 18 AWG solid wire only; stranded not available.
• Tin-bonded 18 AWG (≤16 strand) acceptable.
• Current Interruption 10 cycles.
SYSTEM FEATURES
• RRL connector used with the OnePass system.
• Load side of connector factory attached to luminaire. Refer to luminaire spec sheet for ordering information.
• 4-pole mating connector with push-in terminations allows for simple installation.
• Touch-safe design on both halves, meets UL/CSA requirement.
• Wiping contact design allows safe disconnect under load.
LISTINGS
• UL 2459
• CSA- C22.2 NO. 2459
• NEC 2008 410.130(G) Compliant
• CEC 30-308(4) Compliant
Catalog Number
Notes Type
One Lithonia Way Conyers, GA 30012 Phone: 800-241-4750 www.relocwiring.com techsupportreloc@acuitybrands.com © 2013-2018 Acuity Brands Lighting, Inc. All rights reserved. Rev. 11/29/18
RELOC®-Ready Luminaire
RRL
Universal Fixture Connector
RRL Load Side shown
OD with RRL line side shown OFC with RRL line side shown
RRL
Series Wiring Instructions
A Ballast/driver wired to pin position #1 (120V,277V,347V - Phase A) Ballast/driver wired to pin position #1 & #4 (208V, 240V, 480V - Phase A)
B Ballast/driver wired to pin position #2 (120V,277V,347V - Phase B) Ballast/driver wired to pin position #2 & #4 (208V, 240V, 480V - Phase B)
C Ballast/driver wired to pin position #3 ( 120V,277V,347V - Phase C ) AB Outboard ballast/driver wired to pin position #1 (120V,277V,347V - Phase A) 2
Inboard ballast/driver wired to pin position #2 (120V, 277V, 347V - Phase B) AE Ballast/driver wired to pin position #1 (120V,277V,347V - Phase A)
Emergency ballast/driver wired to pin position #2 (120V,277V,347V - Phase B) 3
ABE Ballast/driver wired to pin position #1 (120V,277V,347V - Phase A) 2
Ballast/driver wired to pin position #2 (120V,277V,347V - Phase B) Emergency ballast/driver wired to pin position #3 (120V,277V,347V - Phase C) 3
C12S Ballast/driver wired to pin position #1 (120V,277V,347V - Phase A) Low voltage wire (positive/purple) (data1) wired to pin position #2 Low voltage wire (common/gray) (data2) wired to pin position #3 4
Ballast/driver wired to pin position #1 & #2 (208V, 240V, 480V - Phase A) 4
Low voltage wire (positive/purple) (data1) wired to pin position #2 Low voltage wire (common/gray) (data2) wired to pin position #3 4
22N Ballast/driver wired to pin position #2 and pin position #3 (120V,277V,347V - Phase B) 122N Ballast/driver wired to pin position #1 and #4 (120V,277V,347V - Phase A)
Ballast/driver wired to pin position #2 and #3 (120V,277V,347V - Phase B)
RRL1
• RoHS Compliant
WARRANTY
• 5-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Actual performance may differ as a result of end-user environment and application.
Note: Specifications subject to change without notice.
Load Side RELOC®-Ready Luminaire
NOTES
1. Not available with IBG Haleon sensor options.
2. Not available with LED luminaries. Only compatible with products that are wired for outboard/inboard control.
3. AE and ABE Commercial fixtures should disconnect the TSPL before unplugging the RRL so it does not go into discharge mode.
4. RRLC12S option is to be used with the OnePass OCU, OCS, OD, OFC and OD for 0-24V integrated single-circuit or 0-10V low voltage controls applications. Not available with integral dimming sensors.
Fixture Ordering Example:
IBG 15000LM SEF AFL GND 277 GZ10
40K 80CRI PS30250 RRLAE BPK DWH
FIXTURE ORDERING LOGIC
For shortest lead times, configure product using bolded options.
Line Side RELOC®
Series
RRL
RELOC® Ordering Example:
OFC 277 12/2G 13 RRL G
OCS 480 10 RRL
OD 277 12/3G 15 RRL
RRL
NOTE
1. All hot conductors and neutral wires present in RELOC cable, drop cable.
2. G option required for OFC fixture cables.
3. Ground wire will include poke-in wire connector.
4. Visit RELOC® to order with RELOC systems.
http://www.relocwiring.com http://www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx https://reloc.acuitybrands.com/
RRL RELOC®-Ready Luminaire
RRL
Position # Function Standard Wiring Applications
120V,277V,347V
1 Hot 1 X X
2 Hot 2 X X
3 Hot 3 X
4 Neutral X X X X
Wiring Instruction RRLA RRLB RRLC RRLAB
DIMENSIONS
Dimensions are shown in inches (millimeters)
LOAD SIDE
Connects to Fixture. Installed on fixture at factory or by customer.
LINE SIDE
Connects to RELOC Fixture Cable.
Installed on Reloc cable at the factory.
WIRING INSTRUCTIONS
Pin position and conductor functions by voltage.
Position # Function Normal and Emergency
Applications 120V, 277V, 347V
1 Hot 1 X X
2 Hot 2 X X
3 Hot 3 X
4 Neutral X X
Wiring Instruction RRLAE RRLABE
Position # Function Class I Class II Wiring Ap-plications 120V, 277V
1 Hot 1 X
2 Data 1, Positive ( + ) X
3 Data 2, Common ( - ) X
4 Neutral X
Wiring Instruction RRLC12S
Position # Function Two Neutral Applications
120V, 277V, 347V
1 Hot 1 X
2 Hot 2 X X
3 Neutral 2 X X
4 Neutral 1 X
Wiring Instruction RRL22N RRL122N
Position # Function Special Industrial Voltage
Applications 208V, 240V, 480V
1 Hot 1 X
2 Hot 2 X
3 Hot 3
4 Hot 4 X X
Wiring Instruction RRLA RRLB
Position # Function Class I Class II Wiring
Applications 208V, 240V, 480V
1 Hot 1 X
2 Data 1, Positive ( + ) X
3 Data 2, Common ( - ) X
4 Hot 2 X
Wiring Instruction RRLC12S
One Lithonia Way Conyers, GA 30012 Phone: 800-241-4750 www.relocwiring.com techsupportreloc@acuitybrands.com © 2013-2018 Acuity Brands Lighting, Inc. All rights reserved. Rev. 11/29/18 http://www.relocwiring.com
| Text Field 1: |
| Text Field 2: |
| Text Field 3: |
| Text Field 4: |
File details come from the government source that posted it. Updated .